Ho-Wing Man
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Ho-Wing Man has a total of 20 co-authors. Here are the top co-authors by number of shared publications:
- Kwok-Yin Wong
The Hong Kong Polytechnic University
4 shared publications - Lawrence Yoon Suk Lee
Department of Chemistry and Research Institute for Smart Energy The Hong Kong Polytechnic University Hong Kong P. R. China
4 shared publications - Shik Chi Edman Tsang
University of Oxford
3 shared publications - Bolong Huang
Department of Chemistry City University of Hong Kong Kowloon Hong Kong SAR China
2 shared publications - Chui-Shan Tsang
Department of Biology and Chemistry, City University of Hong Kong, Tat Chee Avenue, Kowloon, Hong Kong SAR, China
2 shared publications Enna Ha
Department of Applied Biology and Chemical Technology and The State Key Laboratory of Chirosciences, The Hong Kong Polytechnic University, Hung Hom, Kowloon, Hong Kong SAR, China
2 shared publications
Latest Publications
- 1 March 2019
- Published by Elsevier in Applied Catalysis B: Environment and Energy
- Vol. 242, 186-193
Transition metal-doped nickel phosphide nanoparticles as electro- and photocatalysts for hydrogen generation reactions
- 1 March 2019
- Published by Elsevier in Applied Catalysis B: Environment and Energy
- Vol. 242, 186-193
Transition metal-doped nickel phosphide nanoparticles as electro- and photocatalysts for hydrogen generation reactions
- 8 July 2018
- Published by Royal Society of Chemistry (RSC) in Chemical Communications
- Vol. 54 (62) , 8630-8633
Tailored transition metal-doped nickel phosphide nanoparticles for the electrochemical oxygen evolution reaction (OER)
Foreign transition metals are doped into the hexagonal nickel phosphide structure through a simple and facile bottom-up wet-chemical synthesis process via stabilization with oleylamine, trioctylphosphine (TOP), and trioctylphosphine oxide (TOPO): the as-prepared transition metal-doped nickel phosphide nanoparticles show a high level of doping but create no significant distortion of the crystal structure and morphology against pristine nickel phosphide nanoparticles, which exhibit excellent activity in the electrochemical oxygen evolution reaction (OER), having overpotential as small as 330 mV at 20 mA cm−2 with a low Tafel slope value of 39 mV dec−1.
- 8 July 2018
- Published by Royal Society of Chemistry (RSC) in Chemical Communications
- Vol. 54 (62) , 8630-8633
Tailored transition metal-doped nickel phosphide nanoparticles for the electrochemical oxygen evolution reaction (OER)
Foreign transition metals are doped into the hexagonal nickel phosphide structure through a simple and facile bottom-up wet-chemical synthesis process via stabilization with oleylamine, trioctylphosphine (TOP), and trioctylphosphine oxide (TOPO): the as-prepared transition metal-doped nickel phosphide nanoparticles show a high level of doping but create no significant distortion of the crystal structure and morphology against pristine nickel phosphide nanoparticles, which exhibit excellent activity in the electrochemical oxygen evolution reaction (OER), having overpotential as small as 330 mV at 20 mA cm−2 with a low Tafel slope value of 39 mV dec−1.
- 25 April 2017
- Published by Wiley in Energy Technology
- Vol. 5 (6) , 937-944
Electroreduction of Carbon Dioxide to Formic Acid and Methanol over a Palladium/Polyaniline Catalyst in Acidic Solution: A Study of the Palladium Size Effect
We controlled the reaction temperature and feeding rate of the reducing agent to show that Pd nanoparticles (NPs) with different sizes can be synthesized from the reduction of their precursor on polyaniline (PANI) as a solid support. We used UV/Vis spectroscopy, 1H NMR spectroscopy, and IR spectroscopy to identify the electronic and catalytic interactions between Pd NPs and PANI. For the first time, that the unique redox properties of Pd/PANI display a high overpotential for hydrogen evolution, which suppresses this competitive reaction for the electroreduction of CO2 in an acidic solution. As a result, two main liquid products (HCOOH and CH3OH) can be produced selectively with only trace amounts of CO in the gas phase. The current efficiencies for HCOOH and CH3OH increase with the decreasing Pd NP size within the potential range of −0.5 to −0.9 V. The highest current efficiencies for HCOOH (22.8 %) and CH3OH (5.4 %) are thus obtained over Pd(1.31 nm)/PANI at −0.9 V.
- 25 April 2017
- Published by Wiley in Energy Technology
- Vol. 5 (6) , 937-944
Electroreduction of Carbon Dioxide to Formic Acid and Methanol over a Palladium/Polyaniline Catalyst in Acidic Solution: A Study of the Palladium Size Effect
We controlled the reaction temperature and feeding rate of the reducing agent to show that Pd nanoparticles (NPs) with different sizes can be synthesized from the reduction of their precursor on polyaniline (PANI) as a solid support. We used UV/Vis spectroscopy, 1H NMR spectroscopy, and IR spectroscopy to identify the electronic and catalytic interactions between Pd NPs and PANI. For the first time, that the unique redox properties of Pd/PANI display a high overpotential for hydrogen evolution, which suppresses this competitive reaction for the electroreduction of CO2 in an acidic solution. As a result, two main liquid products (HCOOH and CH3OH) can be produced selectively with only trace amounts of CO in the gas phase. The current efficiencies for HCOOH and CH3OH increase with the decreasing Pd NP size within the potential range of −0.5 to −0.9 V. The highest current efficiencies for HCOOH (22.8 %) and CH3OH (5.4 %) are thus obtained over Pd(1.31 nm)/PANI at −0.9 V.
- Open Access
- 3 January 2017
- Published by Springer Nature in Scientific Reports
- Vol. 7 (1) , 39411
Cu2ZnSnS4/MoS2-Reduced Graphene Oxide Heterostructure: Nanoscale Interfacial Contact and Enhanced Photocatalytic Hydrogen Generation
Hydrogen generation from water using noble metal-free photocatalysts presents a promising platform for renewable and sustainable energy. Copper-based chalcogenides of earth-abundant elements, especially Cu2ZnSnS4 (CZTS), have recently arisen as a low-cost and environment-friendly material for photovoltaics and photocatalysis. Herein, we report a new heterostructure consisting of CZTS nanoparticles anchored onto a MoS2-reduced graphene oxide (rGO) hybrid. Using a facile two-step method, CZTS nanoparticles were in situ grown on the surface of MoS2-rGO hybrid, which generated high density of nanoscale interfacial contact between CZTS and MoS2-rGO hybrid. The photoexcited electrons of CZTS can be readily transported to MoS2 through rGO backbone, reducing the electron-hole pair recombination. In photocatalytic hydrogen generation under visible light irradiation, the presence of MoS2-rGO hybrids enhanced the hydrogen production rate of CZTS by 320%, which can be attributed to the synergetic effect of increased charge separation by rGO and more catalytically active sites from MoS2. Furthermore, this CZTS/MoS2-rGO heterostructure showed much higher photocatalytic activity than both Au and Pt nanoparticle-decorated CZTS (Au/CZTS and Pt/CZTS) photocatalysts, indicating the MoS2-rGO hybrid is a better co-catalyst for photocatalytic hydrogen generation than the precious metal. The CZTS/MoS2-rGO system also demonstrated stable photocatalytic activity for a continuous 20 h reaction.
- 3 January 2017
- Published by Springer Nature in Scientific Reports
- Vol. 7 (1) , 39411
Open AccessCu2ZnSnS4/MoS2-Reduced Graphene Oxide Heterostructure: Nanoscale Interfacial Contact and Enhanced Photocatalytic Hydrogen Generation
Hydrogen generation from water using noble metal-free photocatalysts presents a promising platform for renewable and sustainable energy. Copper-based chalcogenides of earth-abundant elements, especially Cu2ZnSnS4 (CZTS), have recently arisen as a low-cost and environment-friendly material for photovoltaics and photocatalysis. Herein, we report a new heterostructure consisting of CZTS nanoparticles anchored onto a MoS2-reduced graphene oxide (rGO) hybrid. Using a facile two-step method, CZTS nanoparticles were in situ grown on the surface of MoS2-rGO hybrid, which generated high density of nanoscale interfacial contact between CZTS and MoS2-rGO hybrid. The photoexcited electrons of CZTS can be readily transported to MoS2 through rGO backbone, reducing the electron-hole pair recombination. In photocatalytic hydrogen generation under visible light irradiation, the presence of MoS2-rGO hybrids enhanced the hydrogen production rate of CZTS by 320%, which can be attributed to the synergetic effect of increased charge separation by rGO and more catalytically active sites from MoS2. Furthermore, this CZTS/MoS2-rGO heterostructure showed much higher photocatalytic activity than both Au and Pt nanoparticle-decorated CZTS (Au/CZTS and Pt/CZTS) photocatalysts, indicating the MoS2-rGO hybrid is a better co-catalyst for photocatalytic hydrogen generation than the precious metal. The CZTS/MoS2-rGO system also demonstrated stable photocatalytic activity for a continuous 20 h reaction.
- 21 March 2016
- Published by Wiley in Chemistry – A European Journal
- Vol. 22 (19) , 6471-6476
A General Palladium‐Catalyzed Hiyama Cross‐Coupling Reaction of Aryl and Heteroaryl Chlorides
A general palladium‐catalyzed Hiyama cross‐coupling reaction of aryl and heteroaryl chlorides with aryl and heteroaryl trialkoxysilanes by a Pd(OAc)2/L2 catalytic system is presented. A newly developed water addition protocol can dramatically improve the product yields. The conjugation of the Pd/L2 system and the water addition protocol can efficiently catalyze a broad range of electron‐rich, ‐neutral, ‐deficient, and sterically hindered aryl chlorides and heteroaryl chlorides with excellent yields within three hours and the catalyst loading can be down to 0.05 mol % Pd for the first time. Hiyama coupling of heteroaryl chlorides with heteroaryl silanes is also reported for the first time. The reaction can be easily scaled up 200 times (100 mmol) without any degasification and purification of reactants; this facilitates the practical application in routine synthesis.
- 21 March 2016
- Published by Wiley in Chemistry – A European Journal
- Vol. 22 (19) , 6471-6476
A General Palladium‐Catalyzed Hiyama Cross‐Coupling Reaction of Aryl and Heteroaryl Chlorides
A general palladium‐catalyzed Hiyama cross‐coupling reaction of aryl and heteroaryl chlorides with aryl and heteroaryl trialkoxysilanes by a Pd(OAc)2/L2 catalytic system is presented. A newly developed water addition protocol can dramatically improve the product yields. The conjugation of the Pd/L2 system and the water addition protocol can efficiently catalyze a broad range of electron‐rich, ‐neutral, ‐deficient, and sterically hindered aryl chlorides and heteroaryl chlorides with excellent yields within three hours and the catalyst loading can be down to 0.05 mol % Pd for the first time. Hiyama coupling of heteroaryl chlorides with heteroaryl silanes is also reported for the first time. The reaction can be easily scaled up 200 times (100 mmol) without any degasification and purification of reactants; this facilitates the practical application in routine synthesis.
- 13 April 2015
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 7 (17) , 9072-9077
Morphology-Controlled Synthesis of Au/Cu2FeSnS4 Core–Shell Nanostructures for Plasmon-Enhanced Photocatalytic Hydrogen Generation
Copper-based chalcogenides of earth-abundant elements have recently arisen as an alternate material for solar energy conversion. Cu2FeSnS4 (CITS), a quaternary chalcogenide that has received relatively little attention, has the potential to be developed into a low-cost and environmentlly friendly material for photovoltaics and photocatalysis. Herein, we report, for the first time, the synthesis, characterization, and growth mechanism of novel Au/CITS core–shell nanostructures with controllable morphology. Precise manipulations in the core–shell dimensions are demonstrated to yield two distinct heterostructures with spherical and multipod gold nanoparticle (NP) cores (Ausp/CITS and Aump/CITS). In photocatalytic hydrogen generation with as-synthesized Au/CITS NPs, the presence of Au cores inside the CITS shell resulted in higher hydrogen generation rates, which can be attributed to the surface plasmon resonance (SPR) effect. The Ausp/CITS and Aump/CITS core–shell NPs enhanced the photocatalytic hydrogen generation by about 125% and 240%, respectively, compared to bare CITS NPs.
- 13 April 2015
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 7 (17) , 9072-9077
Morphology-Controlled Synthesis of Au/Cu2FeSnS4 Core–Shell Nanostructures for Plasmon-Enhanced Photocatalytic Hydrogen Generation
Copper-based chalcogenides of earth-abundant elements have recently arisen as an alternate material for solar energy conversion. Cu2FeSnS4 (CITS), a quaternary chalcogenide that has received relatively little attention, has the potential to be developed into a low-cost and environmentlly friendly material for photovoltaics and photocatalysis. Herein, we report, for the first time, the synthesis, characterization, and growth mechanism of novel Au/CITS core–shell nanostructures with controllable morphology. Precise manipulations in the core–shell dimensions are demonstrated to yield two distinct heterostructures with spherical and multipod gold nanoparticle (NP) cores (Ausp/CITS and Aump/CITS). In photocatalytic hydrogen generation with as-synthesized Au/CITS NPs, the presence of Au cores inside the CITS shell resulted in higher hydrogen generation rates, which can be attributed to the surface plasmon resonance (SPR) effect. The Ausp/CITS and Aump/CITS core–shell NPs enhanced the photocatalytic hydrogen generation by about 125% and 240%, respectively, compared to bare CITS NPs.