GSGalina Sivyakova

Galina Sivyakova

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Galina Sivyakova has a total of 24 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Quality Assurance of Hot-Rolled Products and Adaptive Control Systems

    by Valeriy Druzhinin, Galina Sivyakova, Valerii Tytiuk, Alexey Kalinin, Anatoliy Kulikov

    An analytical review of scientific studies in the field of quality assurance for hotrolled steel products is presented, with a focus on adaptive control systems. The main factors affecting the stability of the rolling process are considered, including deviations in strip thickness and profile, temperature conditions, and dynamic loads. Special attention is given to the role of modern adaptive algorithms that can promptly adjust rolling parameters in real time. The literature review highlights the advantages of adaptive thickness control based on neural network and fuzzy logic regulators. Approaches to adaptive control of interstand tension and the use of loopers to stabilize the process are analyzed. A key aspect is the use of digital observers that monitor parameters not directly measurable, such as elastic torque in the rolls. The relevance of intelligent algorithms for real-time detection of shape defects and surface damage is emphasized. The analysis confirms that the use of adaptive control systems significantly improves the quality of hot-rolled products and reduces the risk of defects during the rolling process.

  • Mathematical Modeling of a Reversible Thyristor DC Electric Drive for Drum Flying Shears

    by Alibek Bartyrbek, Galina Sivyakova, Karshiga Smagulova, Arailym Smail

    The mathematical modeling of the multi-mass mechanical component of drumtype flying shears used in metal rolling mills is considered. The aim of the study is to develop a mathematical model of the multi-mass mechanical component of drum-type flying shears, enabling the analysis of the system's dynamic characteristics and optimization of its parameters. A six-mass dynamic model, taking into account elasticity and damping in mechanical connections, has been developed for the drum-type shears of the CWBRM-1700 rolling mill. A model for the generation of shock loads arising during strip cutting is proposed, and a model of a two-motor reversible DC electric drive with a thyristor converter is presented, including a multi-loop subordinate control system with PID-controllers for voltage, current, and speed. The system of differential equations is solved in MATLAB/ Simulink, and the adequacy of the model is confirmed by comparison with experimental data. The obtained results make it possible to evaluate the influence of elastic connections on the movement of the upper and lower drums, as well as to determine the magnitude of dynamic loads in the mechanical component. This study may be useful for specialists in the field of rolling mill automation and electromechanical systems design

  • Mathematical Modeling of a Multi-mass Electromechanical Part of a Drum Shear

    by Alibek Bartyrbek, Galina Sivyakova, Karshiga Smagulova, Arailym Smail

    This article examines mathematical modeling of the multi-mass mechanical component of drum-type flying shears used in metal rolling mills. The aim of the study is to develop a mathematical model of the multi-mass mechanical component of drum-type shears, enabling the analysis of the system's dynamic characteristics and optimization of its parameters. A mathematical model of the six-mass mechanical component of drum-type shears used in the CWBRM-1700 continuous wide-strip mill (JSC «Qarmet», Temirtau) has been developed, taking into account elastic constraints and internal viscous friction. A simplified kinematic diagram was developed based on an analysis of the unit's design documentation. Formalization of the physical processes in the system allowed for the creation of a system of nonlinear differential equations that adequately describe the electromechanical dynamics of the drive. The numerical solution to this system was implemented in MATLAB/Simulink. The developed model adequately describes the dynamic characteristics of the drum-type shears' mechanical component

  • Application of NARX Artificial Neural Networks in Control Systems of Hot Rolling DC Electric Drives

    by Alibek Batyrbek, Valerii Tytiuk, Galina Sivyakova, Zoya Gelmanova, Abdul Walid Fayez Wazani, Tkalenko Oleksandr

    This paper explores the application of nonlinear autoregressive neural networks with exogenous inputs (NARX) in DC electric drive control systems for hot rolling mills. We consider a NARX network architecture adapted for solving armature current (SEDCM_IA) and angular velocity (SEDCM_WA) problems under significant transient loads and process variables. Mathematical modeling of the electric drive operation is conducted using two separate NARX networks, demonstrating the effectiveness of the proposed approach compared to traditional mathematical modeling methods. It is shown that the use of NARX networks significantly improves control accuracy by taking into account the nonlinear dynamic characteristics of the system and compensating for disturbances in real time. The results of the study are of practical interest for the modernization of rolling mill automation systems and can be used in the design of adaptive control systems for critical electric drives.

  • MODELING THE ELECTROMECHANICAL SYSTEM OF DRUM FLYING SHEARS USING LAGRANGE EQUATIONS

    by A. Y. Batyrbek, G. A. Sivyakova, V. К. Tytiuk

    This article presents mathematical modeling of the electromechanical system of drum flying shears in the conditions of the rolling mill CWBRM-1700 of JSC «Qarmet» based on the Lagrange equations of the second kind. The study is aimed at developing a dynamic model that takes into account the interaction of electric drives, kinematic links and cutting elements under high speeds and loads. The aim of the work is to develop a mathematical model of the electromechanical system of drum flying shears of the rolling mill CWBRM-1700 based on the Lagrange equations of the second kind, taking into account elastic deformations, inertial characteristics and external loads. Generalized coordinates, forces and moments acting in the system are determined, taking into account the technological features of the transverse metal cutting process. Based on the Lagrange equations, differential equations of motion are obtained that describe the dynamics of the system. An analysis of the influence of the parameters of electromechanical components on the accuracy and stability of the shears is carried out. The results of the study allow us to quantitatively evaluate the influence of elastic connections in the mechanical structure of flying shears on the kinematic characteristics of the upper and lower cutting drums, as well as to determine the amplitude-frequency parameters of the resulting dynamic loads. The developed mathematical model creates the possibility of precise optimization of technological cutting modes, a significant increase in energy efficiency and a significant reduction in dynamic loads. This study can be useful for specialists in the field of automation of rolling production and design of electromechanical systems. Key words: modeling, multimass system, electromechanical system, electric drive, hot rolling mill, elastic connections, drum flying shears.

  • Assessment of human-operator’s influence on technical and economic indicators of the excavator production cycle

    by V Tytiuk, D Mrachkovskyi, O Chornyi, V Kuznetsov, M Tryputen, G Sivyakova

    Purpose. Determining the influence of the parameters of the human-operator transfer function on the duration of the technological operation and the cyclic energy consumption of the electromechanical system of a straight shovel excavator equipped with electric drives of various types in order to further improve the human-machine control system of open-pit excavators by compensating for the inertia and nonlinearity of the human-operator characteristics. Methodology. Mathematical modeling of the human-machine control system of an excavator equipped with electric drives of various types, taking into account the dynamic characteristics of the human-operator, establishing regression dependencies of technical and economic indicators of the excavator on the parameters of the equivalent transfer function of the human-operator using design of experiments. Findings. The mathematical models of closed-loop control systems for the position of the bucket of a “straight shovel” excavator with an electric drive according to the Leonard system and a thyristor converter-motor electric drive have been implemented, which differ in that their structure takes into account the nonlinearity and inertia of the human operator and its influence on the performance of the human-machine system. Using the methods of the theory of experiment planning, we obtained regression dependences of the duration of the technological cycle and cycle energy consumption on the values of the time constant and the delay constant, which characterize the current state of the human-operator. The obtained regression models made it possible to evaluate the importance of the influence of various psycho-physiological factors of the human-operator on the technical and economic indicators of the excavator production cycle, which can serve as the basis for further optimization of the operation of mining excavators. Originality. For the first time, mathematical models of the electromechanical system of an excavator according to the “straight shovel” scheme are proposed, including models of electric drives of the main mechanisms, a model of the mechanical part of the excavator and a model of a human-operator, which made it possible to increase the accuracy of determining the energy consumption of the excavator and the time of the operating cycle. The regression models of technical and economic indicators of the excavator production cycle on the delay and inertia of the human-operator were obtained. It was found that the more influential factor is the transportation delay. Practical value. Mathematical models of an excavator with an electric drive based on the generator-motor system and an electric drive based on the thyristor converter-motor-motor system have been developed, including a model of the mechanical part of the excavator and a model of a human-operator. Regression models of the dependence of the duration of the excavator production cycle and its energy consumption on the delay and inertia of the human-operator are obtained. The proposed implementation of the human-machine excavator control system creates prerequisites for further increasing the level of automation of mining excavators.


  • Feasibility by Modeling A Photoelectric System in A Solar Power Substation in Saran, Karaganda

    by Zoya Gelmanova, Alibek Batyrbek, Galina Sivyakova, Mohamad Syazli Fathi

    This article presents a comprehensive modeling and feasibility study for a photovoltaic system in the city of Saran, Karaganda region. In the context of ordered research tasks, a methodology based on an iterative process is proposed. The scientific novelty of the study lies in the step-by-step division of the project into intervals, each of which is characterized by its indicators, dependent on the modeled impacts and conditions. The main technical and technological solutions offered by the solar power plant are designed to realize the expected effect of the project and indicators are compared based on the analysis of financial advantages, sensitivity, and environmental advantages to find the most optimized. The article analyzes the economic feasibility of solar photovoltaic systems, in terms of total cash flow and payback period, for a system with a capacity of 100 MW (the most optimized).


  • Open Access

    Rolling stand electric drive model regarding influence of power supply network parameters

    by Druzhinin Valery Mikhailovich, Kalinin Alexey Anatolievich, Sivyakova Galina Alexandrovna

    Operation mode of hot rolling mill finishing group stands of ArcelorMittal Temirtau JSC electric drives along with thyristor converter units, intended for the drives supply effect significantly the power network parameters. While being carried out the experimental research on operating modes of power network supplying the rolling mill, some oscillograms were constructed that indicate voltage during the rolling process. Analyzing the oscillograms it appears that there are unacceptable voltage drops throughout the network (more than 10%), that, in its turn, effects negatively the main and auxiliary electric drives functioning. Electric drive simulation model have been constructed with the aim accomplishment to learn more about operating modes features of finishing group stands electric drives as well as power network supplying the hot rolling mill, where the main objective is getting the decreased parameters of their mutual influence. The scientific project purpose is verification of the mathematical model choice correctness, construction of a simulation model of the electric drive control system for the main drives of the hot rolling mill stands, taking into consideration the parameters of the power supply network and checking its adequacy.


  • Management of Lifelong Education Projects for Sustainable Development

    by Inna Khovrak, Galina Sivyakova, Ivan Khovrak

    The modern world needs the inspiration of socially responsible leaders for a sustainable future and the promotion of sustainable lifestyles. The purpose of the article is to identify the results of the project «Strengthening University Social Responsibility for Sustainable Development». Research methods: case studies, sociological survey, and graphic method. Results of the research: promoting ethical behaviour and social responsibility in the academic environment; involvement of students to make decisions at the university; promoting dialogue and cooperation; promoting the development of a culture of creation and implementation of university projects on social responsibility.


  • Open Access

    Creating a concept and axiomatization of the applied theory of efficiency of complex technical systems with distributed parameters of input and output products

    by Igor Lutsenko, Valerii Tytiuk, Elena Vikhrova, Iryna Oksanych, Galina Sivyakova

    The object of this study is the processes of optimal control over complex technical systems with input and output products distributed in time. The automatic formation of optimal control trajectories of technical systems that ensure maximum efficiency of production processes is limited by the insufficient development of the applied theory of the efficiency of complex systems. This work considers the development of the conceptual base and axiomatization of the applied theory of the efficiency of technical systems. A system of definitions and a system of axioms describing the indicators of the functioning of the cybernetic model of a technical system have been developed. The resulting system of axioms formalizes the technique and methods for determining various indicators, as well as obtaining the current value of the performance indicator of the technical system. The obtained expressions make it possible to form a subsystem for assessing the effectiveness of a technical system, invariant with respect to its internal structure and the characteristics of the transformation processes implemented by it. The universality of the proposed indicators and the structural unity of the performance evaluation subsystem make it possible to express an opinion on the cybernetic level of these decisions. An example of the practical application of the proposed system of axioms of the applied theory of efficiency is given. The proposed method for determining the efficiency indicator can be applied to arbitrary technical systems with a distributed nature of the change in input and output products. The cybernetic level of abstractions used to determine the effectiveness of complex systems makes it possible to proceed to solving the problem of formalization and full automation of the processes of optimal control over complex technical systems with distributed input and output products