ENE. Z. Nugman

E. Z. Nugman

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


E. Z. Nugman has a total of 32 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Hybrid Robotic Weeding Systems: An Evidence-Qualified Systematic Review of Taxonomy, Performance, and Context-Aware Adaptation

    by Yerik Nugman, Azamat Mustafa, Mukhagali Sagyntay, Algazy Zhauyt, Rustem Kaiyrov, Nurtay Albanbay, Yerlan Koptleuov, Bekzat Ganiuly

    Robotic weeding has emerged as an important technology in precision agriculture. However, existing reviews rarely distinguish integrated hybrid architectures from mono-method robotic systems or sensing-only platforms. This lack of distinction limits reproducible classification and evidence synthesis. This systematic review was conducted in accordance with the Preferred Reporting Items for Systematic Reviews and Meta-Analyses 2020 and the PRISMA extension for Searches. The literature search covered Scopus, Web of Science, ScienceDirect, SpringerLink, and Wiley Online Library. Studies published between January 2011 and August 2026 were considered. A total of 248 records were identified. Of these, 109 studies met the eligibility criteria and were classified according to the directness and maturity of evidence for hybrid-system integration. An evidence-qualified two-level taxonomy was developed based on physical coupling and spatial integration. Hybrid-system performance was then synthesised. The synthesis also considered the biological, environmental, and operational determinants of context-aware adaptation. Mechanical–chemical systems currently provide the strongest direct field evidence. Their weed-control effectiveness reaches up to 99.5%, with herbicide reductions of up to 65.6%. In contrast, mechanical–laser systems are supported mainly by prototype evidence, while the remaining coupling categories are still provisional or insufficiently validated. Overall, the available evidence is too heterogeneous to support universal performance rankings. This evidence-qualified framework can support R&D prioritisation, system-architecture selection, and engineering decision-making by distinguishing validated hybrid configurations from provisional concepts and by clarifying the evidence required for modality coupling, spatial integration, and field validation.

  • ВЛИЯНИЕ ПАРАМЕТРОВ И ЗАЩИТНОГО ГАЗА НА МИКРОСТРУКТУРУ СТАЛИ 308LSI В WAAM

    by Қ. Е. Кудиярбек, Е. З. Нугман, А. Қ. Мустафа, М. Қ. Сағынтай, Н. Д. Нургожаев

    В работе исследовано влияние технологических параметров и состава защитного газа на формирование микроструктуры из нержавеющей стали 308LSi методом Wire Arc Additive Manufacturing (WAAM). Для экспериментов использовалась сварочная проволока диаметром 0,8 мм и газовая смесь 80 %Ar + 20%CO₂. Параметры наплавки I = 110 А, U = 20 В, скорость подачи 400 мм/мин, межслойная выдержка 60 с обеспечили устойчивый процесс формирования цилиндрического образца без выраженных дефектов. Микроструктурный анализ показал, что полученный металл имеет аустенитную матрицу (γ) с равномерно распределённым δ-ферритом. Зафиксированы три характерные морфологии δ-феррита: червеобразная (vermicular), скелетная (skeletal) и сетчатая (lathy), что согласуется с литературными данными по WAAM 308L. Обнаруженные микропоры носили локальный характер и не оказывали существенного влияния на целостность структуры. Измерения микротвёрдости выявили стабильный диапазон 191–213 HV1, подтверждающий однородность сформированной структуры и отсутствие локального упрочнения или перегрева. Установлено, что выбранные режимы наплавки обеспечивают получение образцов с устойчивой двухфазной структурой γ + δ, минимальным количеством дефектов и стабильными механическими характеристиками. Ключевые слова: GMAW, δ-феррит, аустенит, морфология фаз, микротвёрдость, двухфазная структура.

  • Open Access

    Kinematic Analysis and Workspace Evaluation of a New Five-Axis 3D Printer Based on Hybrid Technologies

    by Azamat Mustafa, Rustem Kaiyrov, Yerik Nugman, Mukhagali Sagyntay, Nurtay Albanbay, Algazy Zhauyt, Zharkynbek Turgunov, Ilyas Dyussebayev, Yang Lei

    Additive manufacturing technologies for metals are developing rapidly. Among them, wire arc additive manufacturing (WAAM) has become widespread due to its accessibility. However, parts produced using WAAM require surface post-processing; therefore, hybrid technologies have emerged that combine additive and subtractive processes within a single compact manufacturing complex. Such systems make it possible to organize single-piece and small-batch production, including for the repair and restoration of equipment in remote areas. For this purpose, hybrid equipment must be lightweight, compact for transportation, provide sufficient workspace, and be capable of folding for transport. This paper proposes the concept of a multifunctional metal 3D printer based on hybrid technology, where WAAM is used for printing, and mechanical post-processing is applied to obtain finished parts. To ensure both rigidity and low mass, a 3-UPU parallel manipulator and a worktable with two rotational degrees of freedom are employed, enabling five-axis printing and machining. The printer housing is foldable for convenient transportation. The kinematics of the proposed 3D printer are investigated as an integrated system. Forward and inverse kinematics problems are solved, the velocities and accelerations of the moving platform center are calculated, singular configurations are analyzed, and the workspace of the printer is determined.

  • WAAM ТЕХНОЛОГИЯСЫМЕН ДАЙЫНДАЛҒАН ҮЛГІЛЕРДІҢ МИКРОҚҰРЫЛЫМЫНА ҚАБАТАРАЛЫҚ ИЛЕМДЕУДІҢ ӘСЕРІН ЗЕРТТЕУ

    by А. К. Байбатша, Е. З. Нұғман, А. Қ. Мустафа, И. М. Дюсебаев

    Қазіргі таңда өнеркәсіпте күрделі пішінді және ірі габаритті металл бөлшектерді тиімді, жылдам әрі үнемді жолмен өндіруге деген сұраныс артып келеді. Бұл қажеттілікті өтеу үшін аддитивті өндіріс технологиялары, оның ішінде доғалы аддитивті өндіріс (WAAM – Wire Arc Additive Manufacturing) кеңінен қолданылуда. Алайда WAAM әдісінің басты кемшіліктерінің бірі – қабатаралық шекаралар мен құрылымдағы анизотропия, микрожарықтар және кеуектер сияқты ақаулардың жиі кездесуі. Осыған байланысты, бұл зерттеуде WAAM процесімен біріктірілген MIG дәнекерлеу және әр қабаттан кейін бірден жүргізілетін қабатаралық илемдеу арқылы алынатын құрылым сапасын жақсарту мүмкіндігі зерттелді. Әрбір қабат дәнекерленген соң үлгі бірден пластикалық деформацияға ұшыратылып, дән өлшемін ұсақтау, құрылымның тығыздығы мен біртектілігін арттыру көзделді. ER70S-6 болатынан дайындалған үлгілер Leica DMI8 оптикалық микроскопымен зерттеліп, илемдеудің макро және микродеңгейдегі әсері талданды. Нәтижелер бойынша илемделген үлгілерде қабатаралық шекаралардың жойылып, кеуектілік пен анизотропиялық құрылымның азайғаны, әрі біртекті және ұсақ түйіршікті құрылымның қалыптасқаны анықталды. Бұл илемдеу әдісінің WAAM технологиясында кездесетін құрылымдық кемшіліктерді жоюда және дайын өнім сапасын арттыруда тиімді құрал екенін көрсетті. Алдағы уақытта бұл тәсілді көпбағытты қысым арқылы жетілдіру және деформация әсерін сандық модельдеу арқылы нақтылау ұсынылады. Кілтті сөздер: аддитивті өндіріс, WAAM технологиясы, MIG дәнекерлеу, қабатаралық илемдеу, құрылымдық талдау, микроқұрылым, пластикалық деформация, ER70S-6 болаты.

  • БЕЛСЕНДІ ЖӘНЕ ИНЕРТТІ ГАЗДАРДЫҢ WAAM ТЕХНОЛОГИЯСЫ АРҚЫЛЫ ӨНДІРІЛГЕН БОЛАТТЫҢ МИКРОҚҰРЫЛЫМЫНА ӘСЕРІ

    by Э. С. Чукенова, Е. З. Нұғман, А. Қ. Мустафа, Ф. Хошнау, И. М. Дюсебаев

    Бұл мақалада сым доғалық аддитивті өндіріс (Wire Arc Additive Manufacturing – WAAM) технологиясында қолданылатын белсенді (CO2) және инертті (Ar) қорғаушы газдардың ER70S-6 төменгі көміртекті болат дәнекерлеу сымынан алынған үлгілердің микроқұрлымына әсері жан - жақты зерттелді. Эксперименттік зерттеу барысында бірдей технологиялық параметрлерді оңтайлы қолданылып, тек қорғаушы газ түрі өзгертілді. Алынған үлгілерді алдын ала дайындап, оларға металлографиялық және микроскопиялық әдістермен кешенді талдау жүргізілді. CO2 белсенді қорғаушы газ қолданылған үлгілерден феррит, перлит және цементит фазалары, ал Ar инертті қорғаушы газ қолданылған үлгілерден феррит, перлит, аустенит және мартенситтік құрылымдар анықталды. Сонымен қатар, аргон газы кеуектіліктің азаюына және құрылымының біркелкі болуына оң әсер ететіні көрсетілді. Бұл аргонның аддитивті өндіріс кезінде құйылған үлгінің балқыманың тұрақтылығына, қату процесіне және термиялық әсер ету аймағының сапасына оң әсер ететінін дәлелдеді. Зерттеу нәтижелері WAAM технологиясында қорғаушы газдың микроқұрлымдық қалыптасуға және дайын өнім сапасына әсерін нақты көрсетті. Бұл жұмыс болашақта жоғары сапалы, сенімді және ұзақ қызмет ететін металл конструкцияларын аддитивті әдіспен дайындауда газды дұрыс таңдаудың шешуші рөл татқаратынын көрсетеді. Кілтті сөздер: аддитивті өндіріс, WAAM технология, болат, қорғаушы газ, микроқұрылым, кеуектер.

  • АДДИТИВТІ ТЕНОЛОГИЯМЕН 3D БАСПАЛАУ КЕЗІНДЕ ПАЙДА БОЛАТЫН АУЫТҚУЛАРДЫ КОМПЕНСАЦИЯЛАЙТЫН МАНИПУЛЯТОР

    by А. Қ. Мустафа, Р. А. Кайыров, М. Қ. Сағынтай, Е. З. Нұғман

    Аддитивті тенологияда пайдаланатын технологияларының сенімділігін арттыру және мүмкіндіктерін кеңейту мақсатында басып шығару жүйесін дәстүрлі технологиялармен интеграциялау қарастырылуда. Алайда, бұл процестегі негізгі мәселелердің бірі – баспа бастиектің дәл позицияланбауы, бұл баспаланатын конструкцияның сапасының төмендеуіне әкелуі мүмкін. Осы мәселені шешу үшін бұл мақалада 3D басып шығару кезінде манипулятор ретінде пайдаланатын дәстүрлі техниканың жебесінің ауытқуын компенсациялайтын, баспа бастиектің дәл орналасуын қамтамасыз ететін манипулятор қолдану ұсынылады. Манипуляторды таңдау кезінде сериялық манипуляторлар және параллельді манипуляторларға анализ жасалып қарастырылды. Манипулятор жұмыс кеңістігіндегі XYZ осьтері бойынша ауытқуларды тиімді түрде компенсациялап, басып шығару дәлдігін және сапасын арттыруға мүмкіндік береді. Бұл міндетті жүзеге асыру үшін жоғары жылдамдыққа және дәл позициялау мүмкіндігі жоғары, сондай-ақ параллель кинематикасының арқасында жеткілікті қаттылықты қамтамасыз ететін Клавельдің дельта-роботы таңдалды. Зерттеу барысында кинематиканың тура және кері кинематика есептері шығарылып, манипулятордың жұмыс аймағы анықталды және оның қойылған міндетті шешуге жарамдылығы расталды. Алынған нәтижелер 3D басып шығару процесін одан әрі оңтайландыру және оның технологиялық тиімділігін арттыру үшін қолданылуы мүмкін. Кілтті сөздер: 3D баспалау, манипулятор, кері кинематика, тура кинематика, Клавель дельта роботы.

  • Open Access

    Analysis of the Rolling Process of Alloy 6082 on a Three-High Skew Rolling Mill

    by Rail Sovetbayev, Yerik Nugman, Yerzhan Shayakhmetov, Yermek Abilmazhinov, Anna Kawalek, Kirill Ozhmegov

    Modern requirements for aluminum alloys used in mechanical engineering and aviation include increased strength characteristics and refined microstructure. One of the promising methods for improving the properties of aluminum alloys is rolling on a three-high skew rolling mill, which provides intense plastic deformation and a fine-grained structure. This study describes the results of numerical modeling of the rolling process of aluminum alloy 6082 rods in a three-high skew-type mill. Numerical modeling of alloy 6082 was conducted using the ForgeNxT 2.1 software designed to simulate metal-forming processes, including rolling. The rheological behavior of the material under study was investigated by compression tests using a Gleeble 3800 plastometer (“DSI”, Austin, TX, USA), which enabled the determination of the main parameters of material flow under specified conditions. The process of rolling bars of alloy 6082 on a three-high skew mill was numerically analyzed in the temperature range of 350–400 °C. This allowed for the study of the distribution of stresses, temperatures, and strain rates from the rolling mode. A physical experiment was conducted to validate the results of numerical modeling. The obtained results enabled the identification of rolling modes that promote microstructure refinement and enhance the mechanical properties of the alloy.

  • Open Access

    Implementation of innovative mechanisms to ensuring economic growth of regions based on the development of transport infrastructure

    by Oleksandr Mordovtsev, Oksana Dmytriieva, Inna Shevchenko, Anton Kholodov, Yerik Nugman

    The destabilization of the geopolitical, socio-economic and security situation in the world has exacerbated the issue of sustainable development of regional economies and deepening their interaction. Ensuring the growth of the national economy as a whole and individual regions in particular makes the search for mechanisms aimed specifically at internal sources relevant. Spatial development is gaining particular importance due to the increasing role of transport infrastructure in ensuring the economic growth of regions. The socio-economic heterogeneity of regional systems plays a decisive role in the formation of mechanisms for ensuring economic growth, which determines the diversity and contradictions of the effects of transport infrastructure on them. This is expressed in the fact that similar infrastructure facilities in different regions can have different organizational and economic effects. Thus, the appearance of a road can lead to the acceleration of material flows, thereby contributing to the development of the region's economy, and on the other hand, can stimulate an accelerated outflow of population. At the same time, the principles of managing social development and economic growth of regions obtained in practice do not allow to take into account the functional diversity and inconsistency of the effects of transport infrastructure and thereby complicate the search for effective mechanisms for ensuring regional development. growth based on the development of transport infrastructure. Therefore, the study focuses on the actualization of the need to introduce innovative mechanisms into the economy of regions by determining the conditions necessary and sufficient for the implementation of the role of transport infrastructure as one of the sources of sustainable economic growth. In this regard, the knowledge of the essence and patterns of the mutual influence of transport and regional economic development is of great theoretical and practical interest.


  • Open Access

    PROBLEMS OF NANOSTRUCTURING OF BLANKS AND THEIR SOLUTION BY METHODS OF INTENSIVE PLASTIC DEFORMATION

    by G. M. Kudaibergenova, R. A. Sovetbayev, Ye. Z. Nugman

    Structural materials with ultrafine-grained (UFG) or nano- and submicrocrystalline structure significantly surpass materials obtained by traditional methods, such as casting and pressure processing, in a number of their mechanical characteristics (hardness, etc.). That is why such alloys (mainly alloys based on aluminum, magnesium, titanium) are in constant demand in industry, especially in space, aviation and shipbuilding. The main method for obtaining an ultrafine-grained metal structure is equal-channel angular pressing (ECAP), which is one of the methods of intense plastic deformation (IPD). In addition, there are a number of other methods, such as high-pressure torsion, accumulative roll gluing, the KOBO method and a number of others. Obtaining blanks from corrosion-resistant non-ferrous alloys by the listed methods is not always effective for industrial, mass production volumes, which is why the development and search for methods for obtaining an ultrafine-grained structure of materials continues. This article discusses methods for obtaining an ultrafine-grained structure of alloys, the advantages of these methods and their disadvantages. For aluminum alloy 6082, a method for obtaining a similar structure by rolling on a three-roll radial-shear mill is considered.

  • 3D баспаланған бетонды арматуралауға арналған аутоматты арматуралаушы механизм

    by М.к. Сагынтай, A.K. Мустафа, Е.з. Нұғман

    Құрылыстағы аддитивті технологияның қазіргі кездегі өзекті мәселелерінің бірі – 3D баспаланған бетонды арматуралау болып тұр. Осы уақытқа дейінгі зерттеу жұмыстары 3D баспаланған бетонды арматуралауда тек стандартты бұдырлы болат арматураны қолданғанда ғана оның механикалық қасиеттері дәстүрлі темірбетонның қасиеттеріне жақындайтынын дәлелдеді. Ендігі шешімін табу керек мәселе – 3D баспаланған бетонды стандартты бұдырлы болат арматурамен арматуралау үрдісін аутоматтандыру. Осы мәселені шешу мақсатында бұл жұмыста түйіспелі дәнекерлеу әдісін пайдаланып, аутоматты режимде екі қатарлы арматуралаушы тор құратын аутоматты арматуралаушы механизмнің тұжырымдамасы жасалынып, сол тұжырымдамаға сай оның прототипі жасалынды және жұмыс қабілеттілігін тексеру үшін зертханалық сынақтар жүргізілді. Атап айтқанда, түйіспелі дәнекерлеу әдісін пайдаланып аутоматты режимде жасалатын арматуралаушы тордың механикалық қасиеттері DIN 488-4 стандартының талаптарына сәйкестігін анықтау үшін және прототиптің түйіспелі дәнекерлеу жүйесін тексеру мақсатында крест тәріздес үлгілер жасалынып, динамомашинада ығыстыру әдісімен үзіп тексерілді. Сонымен қатар, аутоматты арматуралаушы механизмнің прототипінің барлық жүйелерінің жұмыс қабілеттілігі тексерілді. Сөйтіп ұсынылған концепцияның жұмыс қабілеттілігі дәлелденді.