Current Organizations / Institutes

The organizations/institutes from the scholar's latest article

Previous Organizations / Institutes

The organizations / institutes from the scholar's other articles in the past ten years


Rogiros Illampas has a total of 35 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Performance of lime-SCM composites for masonry retrofitting: Role of silica fume and metakaolin

    by Luca Penazzato, Rogiros Illampas, Ioannis Rigopoulos, Ioannis Ioannou, Daniel V. Oliveira

  • Open Access

    Development and performance evaluation of a novel high-ductility fiber-reinforced lime-pozzolana matrix for textile reinforced mortar (TRM) masonry strengthening applications

    by Rogiros Illampas, Ioannis Rigopoulos, Ioannis Ioannou

    This paper discusses the development of a high ductility fiber reinforced lime mortar with deflection hardening behavior. In this study, polypropylene fibers have been incorporated in a cementless reference matrix comprising of Natural Hydraulic Lime, silica fume, siliceous aggregates and workability aid admixtures. The properties of the reference and fiber reinforced mortar compositions were assessed by means of standardized laboratory tests and scanning electron microscopy. The reference composition gave an average compressive strength of 12 MPa, rendering it suitable for structural applications. Fiber addition at a dosage of 0.76% by wt. of solids led to a reduction of the compressive strength; however, sufficient load bearing capacity was still achieved (8 MPa). More importantly, the fibers enabled the mortar to sustain useful load after damage initiation, improving post-peak ductility under compression and allowing the material to reach bending stresses up to 20% higher than the first-crack strength. To evaluate the practical application of the proposed materials, their use as matrices in textile reinforced mortar (TRM) strengthening systems was investigated through pilot applications on stone masonry. Diagonal compression tests were performed on 9 ashlar masonry wallettes, including both un-retrofitted and TRM-retrofitted specimens. Single-sided TRMs consisting of alkali resistant glass textiles embedded in either the reference or the fiber reinforced mortar were considered. Specimens retrofitted with TRM constructed using the fiber reinforced mortar, exhibited a remarkable ~ 270% increase in shear strength and > 50% higher deformation capacity, compared to un-retrofitted ones. The strength increment achieved with the reference mortar as the TRM matrix was 80%, with minimal impact on ductility. The TRM comprising the fiber reinforced mortar also showed superior performance in terms of ability to retain integrity at high levels of shear deformation. Overall, the results indicate that the use of fiber reinforced lime matrices in TRM systems applied to masonry substrates has the potential to substantially enhance mechanical performance under in-plane loading, even in cases where only single-sided retrofitting can be realized.


  • Open Access

    The Challenge of Integrating Seismic and Energy Retrofitting of Buildings: An Opportunity for Sustainable Materials?

    by Luca Penazzato, Rogiros Illampas, Daniel V. Oliveira

    Recent earthquakes and escalating energy demands are exposing building stock deficiencies, particularly in terms of seismic resilience and energy efficiency. Many aged constructions do not fulfil current regulations both in terms of seismic and thermal design principles, thus requiring suitable retrofitting solutions. Integrated approaches for concurrent seismic and energy renovation have emerged as promising strategies in recent years, offering holistic solutions that optimize interventions and maximize benefits. While these combined methods hold significant potential for practical applications, there remain opportunities for further research to enhance their advantages. Furthermore, addressing climate concerns requires concentrated effort within the construction sector, where synergetic refurbishments can serve a dual purpose by reducing emissions and promoting the use of more sustainable materials. This study discusses strategies proposed in the literature for integrated retrofitting, considering their environmental impact, both in terms of energy performance and embodied carbon. The overview shows the innovation potential for the development of materials and systems combining acceptable performance with eco-friendly attributes. Yet, their application in integrated retrofitting systems, either as structural components or insulators, is still limited, underscoring the need for continued investigation and advancement. This paper concludes with recommendations to inspire further research and advancements in this critical field.


  • Open Access

    Design of Strain-Hardening Natural TRM Composites: Current Challenges and Future Research Paths

    by Rogiros Illampas, Daniel V. Oliveira, Paulo B. Lourenço

    This paper discusses the challenges in using natural fibers for the development of textile-reinforced mortar (TRM) composites with pseudo-strain-hardening and multiple cracking behavior. The particular characteristics of natural vegetal fibers are analyzed with reference to data from the literature. It is concluded that the efficient use of these fibers as composite reinforcement requires the development of treatment or impregnation protocols for overcoming durability issues, eliminating crimping effects in tensile response and imparting dimensional stability. Relevant experimental research on the synthesis and performance of natural TRMs is reviewed, showing that the fabrication of such systems is, at present, largely based on empirical rather than engineering design. In order to set a framework regarding the properties that the constituents of natural TRM must meet, a comparative analysis is performed against inorganic matrix composites comprising synthetic, mineral and metallic reinforcement. This highlights the need for selecting matrix materials compatible with natural fibers in terms of stiffness and strength. Furthermore, a rational methodology for the theoretical design of natural TRM composites is proposed. First-order analysis tools based on rule-of-mixtures and fracture mechanics concepts are considered. Based on the findings of this study, paths for future research are discussed.


  • Open Access

    Appraising the Seismic Response of a Retrofitted Adobe Historic Structure, the Role of Modal Updating and Advanced Computations

    by Seyed Salar Ahmadi, Georgios Karanikoloudis, Nuno Mendes, Rogiros Illambas, Paulo B. Lourenço

    The concepts of structural assessment and retrofit of historical constructions are of particular complexity and require advanced knowledge in material science, conservation techniques and structural analysis. In particular, adobe constructions, given their low mechanical properties and brittle failure modes, are in immense need of comprehensive assessment and retrofitting plans. The current work focuses on the adobe Church of Kuñotambo in Peru, having experienced long periods of deterioration and earthquake-related damage. Under the ongoing Seismic Retrofitting Project (SRP) of the Getty Conservation Institute (GCI), the structural assessment of the church initiated in 2015 confirmed the low lateral capacity of the building and the poor connectivity between the structural parts. Based on the existing cracks and damage, a strengthening scheme was optimized and validated. After the implementation of the retrofitting plan, the quality of its execution and efficiency were assessed in 2019 with a new in situ campaign, which included ambient vibration testing (AVT) and sonic testing. From the acquired field data, the FE model of the retrofitted church was optimized, by updating the stiffness properties of masonry and discontinuities. Moreover, nonlinear static analyses were performed on the updated model in all in-plan directions. Finally, a displacement-based performance assessment was undertaken, under different earthquake limit states, demonstrating the adequacy of the retrofitting.


  • Open Access

    Experimental Research on Bond Behaviour of Fabric Reinforced Cementitious Matrix Composites for Retrofitting Masonry Walls

    by Fayu Wang, Nicholas Kyriakides, Christis Chrysostomou, Eleftherios Eleftheriou, Renos Votsis, Rogiros Illampas

    Fabric reinforced cementitious matrix (FRCM) composites, also known as textile reinforced mortars (TRM), an inorganic matrix constituting fibre fabrics and cement-based mortar, are becoming a widely used composite material in Europe for upgrading the seismic resistance of existing reinforced concrete (RC) frame buildings. One way of providing seismic resistance upgrading is through the application of the proposed FRCM system on existing masonry infill walls to increase their stiffness and integrity. To examine the effectiveness of this application, the bond characteristics achieved between (a) the matrix and the masonry substrate and (b) the fabric and the matrix need to be determined. A series of experiments including 23 material performance tests, 15 direct tensile tests of dry fabric and composites, and 30 shear bond tests between the matrix and brick masonry, were carried out to investigate the fabric-to-matrix and matrix-to-substrate bond behaviour. In addition, different arrangements of extruded polystyrene (XPS) plates were applied to the FRCM to test the shear bond capacity of this insulation system when used on a large-scale wall.