Vanita Somasekhar
Vanita Somasekhar has a total of 25 co-authors. Here are the top co-authors by number of shared publications:
- Archana A
Department of Pharmaceutical Analysis, KLE College of Pharmacy
1 shared publication Athira Chandran L
Department of Pharmaceutical Analysis, KLE College of Pharmacy, Rajajinagar, Bengaluru-560010, KLE Academy of Higher Education and Research
1 shared publication- Bijaya Ghosh
Department of Pharmaceutics, NSHM College of Pharmaceutical Technology, NSHM Knowledge Campus, Kolkata, West Bengal, India
1 shared publication Chandran Athira
Department of Pharmaceutical Analysis, KLE College of Pharmacy
1 shared publicationD. Gowri Sankar
1 shared publicationDannana Gowrisankar
1 shared publication
Latest Publications
- 27 August 2026
- Published by Taylor & Francis in Analytical Chemistry Letters
- Vol. 16 (5) , 800-821
Green AQbD-based HPLC method for estimation of isosorbide dinitrate in bulk and wafers
Isosorbide dinitrate (ISDN) is a widely used vasodilator for treating angina pectoris1. Its effectiveness stems from its ability to relax vascular smooth muscles, leading to decreased myocardial ox...
- 27 August 2026
- Published by Taylor & Francis in Analytical Chemistry Letters
- Vol. 16 (5) , 800-821
Green AQbD-based HPLC method for estimation of isosorbide dinitrate in bulk and wafers
Isosorbide dinitrate (ISDN) is a widely used vasodilator for treating angina pectoris1. Its effectiveness stems from its ability to relax vascular smooth muscles, leading to decreased myocardial ox...
- 3 August 2026
- Published by Taylor & Francis in Journal of Liquid Chromatography & Related Technologies
- Vol. 49 (13-16) , 454-462
A multi-technique analytical strategy for the standardization of Boswellia serrata : RP-HPLC quantification employing relative response factors, HPTLC fingerprinting, LC-MS/MS characterization
The oleo-gum resin obtained from Boswellia serrata, commonly known as Indian frankincense and shallaki, has been used for centuries in traditional medicinal systems.[1] It is characterized by a com...
- 3 August 2026
- Published by Taylor & Francis in Journal of Liquid Chromatography & Related Technologies
- Vol. 49 (13-16) , 454-462
A multi-technique analytical strategy for the standardization of Boswellia serrata : RP-HPLC quantification employing relative response factors, HPTLC fingerprinting, LC-MS/MS characterization
The oleo-gum resin obtained from Boswellia serrata, commonly known as Indian frankincense and shallaki, has been used for centuries in traditional medicinal systems.[1] It is characterized by a com...
- 26 November 2025
- Published by Elsevier in Journal of Chromatography A
- Vol. 1766, 466570
Shilajit-analytical study to understand the phyto complex present in shilajit raw material, extract and resin by using hyphenated techniques
- 26 November 2025
- Published by Elsevier in Journal of Chromatography A
- Vol. 1766, 466570
Shilajit-analytical study to understand the phyto complex present in shilajit raw material, extract and resin by using hyphenated techniques
- Open Access
- 28 May 2024
- Published by Manuscript Technomedia LLP in Indian Journal of Pharmaceutical Education and Research
- Vol. 58 (2s) , s591-s597
Development and Validation of High-Performance Thin Layer Chromatographic Method for Estimation of Acyclovir
Background The antiviral medication genre comprises the synthetic purine nucleoside analogue acyclovir, which particularly is used to treat varicella-zoster and herpes simplex virus infections. By incorporating into viral DNA to stop further synthesis, acyclovir limits DNA synthesis and viral multiplication. The investigation of an economical alternative was spurred by the existence of the currently used HPLC and UV techniques for acyclovir analysis, which are recognized for their solvent-intensive character. The innovation offers a more cost-effective method of pharmaceutical analysis along with improving sustainability. Materials and Methods Using a CAMAG Linomat 5 sampler, the samples were spotted in the form of bands on a precoated silica gel plate using a CAMAG microliter syringe. The application rate was kept constant at 100 nL/sec and the spacing between the tracks was set. Chloroform, ethanol, isopropyl alcohol and strong ammonia (2:4:3:1 v/v/v/v) constitute the mobile phase. The development process was linear ascending in a twin trough glass chamber that was saturated with a mobile phase. To estimate acyclovir, densitometric scanning was carried out in the absorbance mode at 254 nm. Results With r2=0.9974, the calibration plots’ linear regression analysis results demonstrated a strong linear association. The limit of quantification was 11.7726 μg/mL, whereas the limit of detection was 3.884 μg/mL. Conclusion According to statistical analysis of the data, the approach was found to be precise, accurate, repeatable, sensitive and selective for the analysis of acyclovir. The technique will work well for routine quality control when estimating acyclovir as a bulk medication.
- 28 May 2024
- Published by Manuscript Technomedia LLP in Indian Journal of Pharmaceutical Education and Research
- Vol. 58 (2s) , s591-s597
Open AccessDevelopment and Validation of High-Performance Thin Layer Chromatographic Method for Estimation of Acyclovir
Background The antiviral medication genre comprises the synthetic purine nucleoside analogue acyclovir, which particularly is used to treat varicella-zoster and herpes simplex virus infections. By incorporating into viral DNA to stop further synthesis, acyclovir limits DNA synthesis and viral multiplication. The investigation of an economical alternative was spurred by the existence of the currently used HPLC and UV techniques for acyclovir analysis, which are recognized for their solvent-intensive character. The innovation offers a more cost-effective method of pharmaceutical analysis along with improving sustainability. Materials and Methods Using a CAMAG Linomat 5 sampler, the samples were spotted in the form of bands on a precoated silica gel plate using a CAMAG microliter syringe. The application rate was kept constant at 100 nL/sec and the spacing between the tracks was set. Chloroform, ethanol, isopropyl alcohol and strong ammonia (2:4:3:1 v/v/v/v) constitute the mobile phase. The development process was linear ascending in a twin trough glass chamber that was saturated with a mobile phase. To estimate acyclovir, densitometric scanning was carried out in the absorbance mode at 254 nm. Results With r2=0.9974, the calibration plots’ linear regression analysis results demonstrated a strong linear association. The limit of quantification was 11.7726 μg/mL, whereas the limit of detection was 3.884 μg/mL. Conclusion According to statistical analysis of the data, the approach was found to be precise, accurate, repeatable, sensitive and selective for the analysis of acyclovir. The technique will work well for routine quality control when estimating acyclovir as a bulk medication.
- Open Access
- 1 March 2016
- Published by FapUNIFESP (SciELO) in Brazilian Journal of Pharmaceutical Sciences
- Vol. 52 (1) , 35-43
Comparative antioxidant and bioavailability studies of Vitamin C in Phyllanthus emblica Linn. and its combinations with Piper nigrum Linn. and Zingiber officinale Roscoe
Phyllanthus emblica Linn. (amla) is used in Ayurveda, the ancient Indian system of medicine and its major constituent is vitamin C which has effective free radical scavenging property. The purpose of this study was to evaluate the in vitro antioxidant activity and the bioavailability profile of vitamin C in amla and its combinations with piperine and ginger in comparison to synthetic vitamin C using New Zealand rabbits. In vitro antioxidant activity studies of synthetic vitamin C, amla, amla with piperine and amla with ginger were carried out using different models such as 2,2-Diphenyl-1-picrylhydrazyl, Nitric Oxide, Hydrogen peroxide scavenging methods, Total reductive capability and Oxygen Radical Absorbance Capacity estimation. The study results showed that synthetic vitamin C, amla, amla with piperine and amla with ginger possess significant in vitro antioxidant activity. For bioavailability studies, synthetic vitamin C, amla, amla with piperine and amla with ginger 100 mg/kg, were administered orally and the serum samples were analyzed by HPLC at 0, 1, 2, 3, 4, 6, 8, 10, 12 and 24 hours. Bioavailability studies revealed that amla with piperine combination has higher concentration of vitamin C when compared to synthetic vitamin C. This is probably due to presence of piperine, which is a bioavailability enhancer. The present study supports the fact that amla with piperine combination can be an alternative to synthetic vitamin C
- 1 March 2016
- Published by FapUNIFESP (SciELO) in Brazilian Journal of Pharmaceutical Sciences
- Vol. 52 (1) , 35-43
Open AccessComparative antioxidant and bioavailability studies of Vitamin C in Phyllanthus emblica Linn. and its combinations with Piper nigrum Linn. and Zingiber officinale Roscoe
Phyllanthus emblica Linn. (amla) is used in Ayurveda, the ancient Indian system of medicine and its major constituent is vitamin C which has effective free radical scavenging property. The purpose of this study was to evaluate the in vitro antioxidant activity and the bioavailability profile of vitamin C in amla and its combinations with piperine and ginger in comparison to synthetic vitamin C using New Zealand rabbits. In vitro antioxidant activity studies of synthetic vitamin C, amla, amla with piperine and amla with ginger were carried out using different models such as 2,2-Diphenyl-1-picrylhydrazyl, Nitric Oxide, Hydrogen peroxide scavenging methods, Total reductive capability and Oxygen Radical Absorbance Capacity estimation. The study results showed that synthetic vitamin C, amla, amla with piperine and amla with ginger possess significant in vitro antioxidant activity. For bioavailability studies, synthetic vitamin C, amla, amla with piperine and amla with ginger 100 mg/kg, were administered orally and the serum samples were analyzed by HPLC at 0, 1, 2, 3, 4, 6, 8, 10, 12 and 24 hours. Bioavailability studies revealed that amla with piperine combination has higher concentration of vitamin C when compared to synthetic vitamin C. This is probably due to presence of piperine, which is a bioavailability enhancer. The present study supports the fact that amla with piperine combination can be an alternative to synthetic vitamin C
- Open Access
- 1 December 2014
- Published by FapUNIFESP (SciELO) in Brazilian Journal of Pharmaceutical Sciences
- Vol. 50 (4) , 793-797
Optimization and validation of an RP-HPLC method for the estimation of 6-mercaptopurine in bulk and pharmaceutical formulations
A reverse phase HPLC method is described for the determination of 6-mercaptopurine in bulk and tablets. Chromatography was carried on a C18 column using a mixture of acetonitrile and 0.05 mol/L sodium acetate buffer (10:90 v/v) as the mobile phase at a flow rate of 1 mL/min-1 with detection at 324 nm. The retention time of the drug was 3.25 min. The detector response was linear in the concentration of 0.01-5 μg/mL. The limit of detection and limit of quantification were 17 and 52 ng/mL respectively. The method was validated by determining its sensitivity, linearity, accuracy and precision. The proposed method is simple, economical, fast, accurate and precise and hence can be applied for routine quality control of mercaptopurine in bulk and tablets.
- 1 December 2014
- Published by FapUNIFESP (SciELO) in Brazilian Journal of Pharmaceutical Sciences
- Vol. 50 (4) , 793-797
Open AccessOptimization and validation of an RP-HPLC method for the estimation of 6-mercaptopurine in bulk and pharmaceutical formulations
A reverse phase HPLC method is described for the determination of 6-mercaptopurine in bulk and tablets. Chromatography was carried on a C18 column using a mixture of acetonitrile and 0.05 mol/L sodium acetate buffer (10:90 v/v) as the mobile phase at a flow rate of 1 mL/min-1 with detection at 324 nm. The retention time of the drug was 3.25 min. The detector response was linear in the concentration of 0.01-5 μg/mL. The limit of detection and limit of quantification were 17 and 52 ng/mL respectively. The method was validated by determining its sensitivity, linearity, accuracy and precision. The proposed method is simple, economical, fast, accurate and precise and hence can be applied for routine quality control of mercaptopurine in bulk and tablets.
- Open Access
- 1 January 2010
- Published by Wiley in Journal of Chemistry
- Vol. 7 (3) , 807-812
Development and Validation of a Rapid RP‐HPLC Method for the Estimation of Esmolol Hydrochloride in Bulk and Pharmaceutical Dosage Forms
A reverse phase HPLC method is described for the determination of esmolol hydrochloride in bulk and injections. Chromatography was carried on a C18 column using a mixture of acetonitrile, 0.05 M sodium acetate buffer and glacial acetic acid (35:65:3 v/v/v) as the mobile phase at a flow rate of 1 mL/min with detection at 275 nm. The retention time of the drug was 4.76 min. The detector response was linear in the concentration of 1‐50 μg/mL. The limit of detection and limit of quantification was 0.614 and 1.86 μg/mL respectively. The method was validated by determining its sensitivity, linearity, accuracy and precision. The proposed method is simple, economical, fast, accurate and precise and hence can be applied for routine quality control of esmolol hydrochloride in bulk and injections.
- 1 January 2010
- Published by Wiley in Journal of Chemistry
- Vol. 7 (3) , 807-812
Open AccessDevelopment and Validation of a Rapid RP‐HPLC Method for the Estimation of Esmolol Hydrochloride in Bulk and Pharmaceutical Dosage Forms
A reverse phase HPLC method is described for the determination of esmolol hydrochloride in bulk and injections. Chromatography was carried on a C18 column using a mixture of acetonitrile, 0.05 M sodium acetate buffer and glacial acetic acid (35:65:3 v/v/v) as the mobile phase at a flow rate of 1 mL/min with detection at 275 nm. The retention time of the drug was 4.76 min. The detector response was linear in the concentration of 1‐50 μg/mL. The limit of detection and limit of quantification was 0.614 and 1.86 μg/mL respectively. The method was validated by determining its sensitivity, linearity, accuracy and precision. The proposed method is simple, economical, fast, accurate and precise and hence can be applied for routine quality control of esmolol hydrochloride in bulk and injections.
- Open Access
- 1 January 2009
- Published by Wiley in Journal of Chemistry
- Vol. 6 (4) , 1091-1102
Development and Validation of a Rapid RP‐HPLC Method for the Determination of Venlafaxine Hydrochloride in Pharmaceutical Dosage forms using Experimental Design
The objective of the current study was to develop a simple, accurate, precise and rapid reversed‐phase HPLC method and subsequent validation as per ICH guidelines for the determination of venlafaxine hydrochloride in pharmaceutical dosage forms. The proposed RP‐HPLC method utilizes a 5 μm Varian® Microsorb‐MV 100 C18 column (250 mmx4.6 mm) at ambient temperature. A 23 factorial design consisting of 3 factors at 2 levels was set up to standardize the chromatographic conditions. A numerical optimization technique employing the desirability approach was used to locate the optimum chromatographic conditions. The optimum mobile phase consisted of acetonitrile, 0.04 M potassium dihydrogen phosphate buffer and methanol (45:25:30, v/v), with pH adjusted to 5.5 using 10% phosphoric acid solution. The mobile phase was delivered isocratically at a flow rate of 1 mL/min with UV detection at 224 nm. The calibration plots constructed using the optimized chromatographic conditions displayed good linear relationship in the concentration range of 1‐50 μg/mL with r=0.9992. The method was validated for precision, accuracy, robustness and recovery. The minimum detectable and minimum quantifiable amounts were found to be 0.568 and 1.72 μg/mL, respectively and the method was found to be reproducible from the statistical data generated. Venlafaxine hydrochloride was eluted at 3.43 min
- 1 January 2009
- Published by Wiley in Journal of Chemistry
- Vol. 6 (4) , 1091-1102
Open AccessDevelopment and Validation of a Rapid RP‐HPLC Method for the Determination of Venlafaxine Hydrochloride in Pharmaceutical Dosage forms using Experimental Design
The objective of the current study was to develop a simple, accurate, precise and rapid reversed‐phase HPLC method and subsequent validation as per ICH guidelines for the determination of venlafaxine hydrochloride in pharmaceutical dosage forms. The proposed RP‐HPLC method utilizes a 5 μm Varian® Microsorb‐MV 100 C18 column (250 mmx4.6 mm) at ambient temperature. A 23 factorial design consisting of 3 factors at 2 levels was set up to standardize the chromatographic conditions. A numerical optimization technique employing the desirability approach was used to locate the optimum chromatographic conditions. The optimum mobile phase consisted of acetonitrile, 0.04 M potassium dihydrogen phosphate buffer and methanol (45:25:30, v/v), with pH adjusted to 5.5 using 10% phosphoric acid solution. The mobile phase was delivered isocratically at a flow rate of 1 mL/min with UV detection at 224 nm. The calibration plots constructed using the optimized chromatographic conditions displayed good linear relationship in the concentration range of 1‐50 μg/mL with r=0.9992. The method was validated for precision, accuracy, robustness and recovery. The minimum detectable and minimum quantifiable amounts were found to be 0.568 and 1.72 μg/mL, respectively and the method was found to be reproducible from the statistical data generated. Venlafaxine hydrochloride was eluted at 3.43 min
- 1 July 2008
- Published by Springer Nature in AAPS PharmSciTech
- Vol. 9 (3) , 791-797
Screening of Venlafaxine Hydrochloride for Transdermal Delivery: Passive Diffusion and Iontophoresis
The objective of the study was to investigate in vitro transdermal delivery of venlafaxine hydrochloride across the pigskin by passive diffusion and iontophoresis. For passive diffusion, experiments were carried out in Franz diffusion cell whereas for iontophoretic permeation, the diffusion cell was modified to contain both the donor and return electrode on the same side of skin. Anodal iontophoresis was carried out using a current density of 0.5 mA/cm2. Donor concentrations used were 585.5 mg/ml (saturated solution) and 100 mg/ml. Experiments initially performed to determine the transport efficiency of venlafaxine ions showed promising results. Iontophoresis increased the permeation rate at both concentration levels over their passive counterparts (P < 0.01), but surprisingly higher steady-state flux was obtained from lower donor drug load (P < 0.01). The favorable pH of the unsaturated solutions is suggested to be the cause for this effect. Mild synergistic effect was observed when iontophoresis was carried out incorporating peppermint oil in the donor but the same was not found in passive diffusion. Highest steady-state flux obtained in the experiment was 3.279 μmol/cm2/h when peppermint oil (0.1%) was included in the donor. As the maintenance requirement of venlafaxine hydrochloride is approximately 9.956 μmol/h, the results suggested that the drug is a promising candidate for iontophoretic delivery.
- 1 July 2008
- Published by Springer Nature in AAPS PharmSciTech
- Vol. 9 (3) , 791-797
Screening of Venlafaxine Hydrochloride for Transdermal Delivery: Passive Diffusion and Iontophoresis
The objective of the study was to investigate in vitro transdermal delivery of venlafaxine hydrochloride across the pigskin by passive diffusion and iontophoresis. For passive diffusion, experiments were carried out in Franz diffusion cell whereas for iontophoretic permeation, the diffusion cell was modified to contain both the donor and return electrode on the same side of skin. Anodal iontophoresis was carried out using a current density of 0.5 mA/cm2. Donor concentrations used were 585.5 mg/ml (saturated solution) and 100 mg/ml. Experiments initially performed to determine the transport efficiency of venlafaxine ions showed promising results. Iontophoresis increased the permeation rate at both concentration levels over their passive counterparts (P < 0.01), but surprisingly higher steady-state flux was obtained from lower donor drug load (P < 0.01). The favorable pH of the unsaturated solutions is suggested to be the cause for this effect. Mild synergistic effect was observed when iontophoresis was carried out incorporating peppermint oil in the donor but the same was not found in passive diffusion. Highest steady-state flux obtained in the experiment was 3.279 μmol/cm2/h when peppermint oil (0.1%) was included in the donor. As the maintenance requirement of venlafaxine hydrochloride is approximately 9.956 μmol/h, the results suggested that the drug is a promising candidate for iontophoretic delivery.