Fatma Rabia Karaduman
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Fatma Rabia Karaduman has a total of 20 co-authors. Here are the top co-authors by number of shared publications:
- Nesrin Horzum
Department of Engineering Science Izmir Katip Celebi University Izmir 35620 Turkey
8 shared publications - Saniye Türk Çulha
Department of Hydrobiology, Fisheries Faculty, İzmir Kâtip Çelebi University, Çiğli, Izmir, Turkey
6 shared publications - Ayşegül Ülkü Metin
Kırıkkale University, Department of Chemistry, Faculty of Engineering and Natural Sciences, Multifunctional Engineered Technologies Laboratory (METLab), Kırıkkale, Türkiye
5 shared publications - Hakkı Dereli
İzmir Katip Çelebi Üniversitesi, Su ürünleri Fakültesi
2 shared publications Mehmet Culha
2 shared publicationsBetül Öztürk Köksal
Nanotechnology Graduate Program İzmir Katip Çelebi University İzmir 35620 Türkiye
1 shared publication
Latest Publications
- 22 September 2026
- Published by Izmir UOD
- p. 152-160
Preliminary Investigation of Boron Carbide-Reinforced PU Nanofibrous Composites: Fabrication and Characterization
This study presents the fabrication of boron carbide (B4C)-reinforced polyurethane (PU) composite nanofibers containing different B4C loadings (0, 1, 3, and 7 wt%) for potential protective applications in the defense industry. B4C/PU composite nanofibers were successfully produced using electrospinning under optimized processing conditions (12.5 kV applied voltage, 18 cm tip-to-collector distance, and 1.5 mL h-1 feed rate). The resulting nanofibers were characterized using scanning electron microscopy (SEM), Fourier-transform infrared spectroscopy (FTIR), Raman spectroscopy, and thermogravimetric analysis (TGA) to evaluate their structural, chemical, and thermal properties. FTIR and Raman analyses confirmed the successful incorporation of B4C particles into the PU matrix while preserving the characteristic chemical structure of PU, indicating that the interaction between the two components was predominantly physical. TGA results revealed that incorporating B4C slightly decreased the T50 value but increased the residual mass of the nanofibers, indicating thermal resistance at elevated temperatures. These findings highlight the potential of B4C/PU nanofibers for advanced protective materials in defense-related applications.
- 22 September 2026
- Published by Izmir UOD
- p. 152-160
Preliminary Investigation of Boron Carbide-Reinforced PU Nanofibrous Composites: Fabrication and Characterization
This study presents the fabrication of boron carbide (B4C)-reinforced polyurethane (PU) composite nanofibers containing different B4C loadings (0, 1, 3, and 7 wt%) for potential protective applications in the defense industry. B4C/PU composite nanofibers were successfully produced using electrospinning under optimized processing conditions (12.5 kV applied voltage, 18 cm tip-to-collector distance, and 1.5 mL h-1 feed rate). The resulting nanofibers were characterized using scanning electron microscopy (SEM), Fourier-transform infrared spectroscopy (FTIR), Raman spectroscopy, and thermogravimetric analysis (TGA) to evaluate their structural, chemical, and thermal properties. FTIR and Raman analyses confirmed the successful incorporation of B4C particles into the PU matrix while preserving the characteristic chemical structure of PU, indicating that the interaction between the two components was predominantly physical. TGA results revealed that incorporating B4C slightly decreased the T50 value but increased the residual mass of the nanofibers, indicating thermal resistance at elevated temperatures. These findings highlight the potential of B4C/PU nanofibers for advanced protective materials in defense-related applications.
- 3 September 2026
- Published by Elsevier in Algal Research
- Vol. 99
Sustainable removal of trace cadmium using algae-based electrospun nanofibers: From batch sorption to continuous flow
- 3 September 2026
- Published by Elsevier in Algal Research
- Vol. 99
Sustainable removal of trace cadmium using algae-based electrospun nanofibers: From batch sorption to continuous flow
- 9 September 2025
- Published by Izmir UOD
- p. 153-159
Evaluation of Boron Carbide-Incorporated Composite Nanofibers for Defense Applications
This work examines the production and evaluation of boron carbide-doped polyacrylonitrile B4C/PAN nanofibers designed for use in the defense industry. Composite nanofibers were prepared by electrospinning PAN solutions containing varying B4C concentrations (1-20 wt%) under optimized processing conditions (15 kV voltage, 18 cm needle-to-collector distance, 1.5 mL/h flow rate). The structural and chemical characteristics of the nanofibers were evaluated using FTIR and Raman spectroscopy, while their thermal behavior was investigated by TGA. Increasing B4C content enhanced the thermal stability of PAN nanofibers, as evidenced by higher decomposition temperatures and reduced total weight loss—dropping from 57% in neat PAN to 28% in the 20 wt% B4C/PAN sample— indicating that B4C reinforces the polymer structure at elevated temperatures and supports its suitability for protective applications. Together, these findings demonstrate that B4C not only improves thermal resistance but also chemically integrates with the polymer matrix, making B4C/PAN nanofibers promising candidates for advanced, thermally stable defense textiles.
- 9 September 2025
- Published by Izmir UOD
- p. 153-159
Evaluation of Boron Carbide-Incorporated Composite Nanofibers for Defense Applications
This work examines the production and evaluation of boron carbide-doped polyacrylonitrile B4C/PAN nanofibers designed for use in the defense industry. Composite nanofibers were prepared by electrospinning PAN solutions containing varying B4C concentrations (1-20 wt%) under optimized processing conditions (15 kV voltage, 18 cm needle-to-collector distance, 1.5 mL/h flow rate). The structural and chemical characteristics of the nanofibers were evaluated using FTIR and Raman spectroscopy, while their thermal behavior was investigated by TGA. Increasing B4C content enhanced the thermal stability of PAN nanofibers, as evidenced by higher decomposition temperatures and reduced total weight loss—dropping from 57% in neat PAN to 28% in the 20 wt% B4C/PAN sample— indicating that B4C reinforces the polymer structure at elevated temperatures and supports its suitability for protective applications. Together, these findings demonstrate that B4C not only improves thermal resistance but also chemically integrates with the polymer matrix, making B4C/PAN nanofibers promising candidates for advanced, thermally stable defense textiles.
- Open Access
- 28 March 2025
- Published by Kastamonu University in Memba Su Bilimleri Dergisi
- Vol. 11 (1) , 34-41
Phytoplankton Composition of Ürkmez Dam Lake (İzmir-Türkiye)
Ürkmez Dam Lake is located within the borders of the Seferihisar district of İzmir province and was built between 1985 and 1989 years to meet the water needs for drinking and usage purposes. The dam has a body fill type of soil, a height of 45 m from the thalweg, a body volume of 991 dam³, a lake area of 1 km² at normal water level and a lake volume of 7 hm³. The water resources of this dam lake, which is approximately 35 m above sea level, are rainwater and the Ürkmez stream, which gives its name to the dam. The aim of this study was to determine the phytoplankton composition of Ürkmez Dam Lake (İzmir-Türkiye) and to carried out the seasonal changes in phytoplankton. For this study, phytoplankton samples were taken from a selected sampling point at monthly intervals between March 2014 and February 2015 and some physical parameters were measured in situ. Temperature measurements in the surface, middle and bottom waters of Ürkmez Dam Lake showed changes between 9.0-28.3 oC at the surface, 8.8-27.4 oC at the middle depth and 8.6-16.6 oC at the bottom. Depth varied between 10-23 m and Secchi depth varied between 0.6-3.6 m. A total of 28 taxa belonging to the divisions Cyanobacteria (5 taxa), Chlorophyta (7 taxa), Myzozoa (3 taxa), Euglenozoa (4 taxa), Ochrophyta-Bacillariophyceae (6 taxa), Ochrophyta-Chrysophyceae (2 taxa) and Cryptophyta (1 taxa) were identified in Ürkmez Dam Lake during the study period. These findings have contributed to the literature revealing the freshwater algal flora and distribution of Türkiye. It was evaluated that these taxa are commonly observed in Turkish dam lakes and are mostly compatible with aquatic ecosystems with mesotrophic and unstable water column.
- 28 March 2025
- Published by Kastamonu University in Memba Su Bilimleri Dergisi
- Vol. 11 (1) , 34-41
Open AccessPhytoplankton Composition of Ürkmez Dam Lake (İzmir-Türkiye)
Ürkmez Dam Lake is located within the borders of the Seferihisar district of İzmir province and was built between 1985 and 1989 years to meet the water needs for drinking and usage purposes. The dam has a body fill type of soil, a height of 45 m from the thalweg, a body volume of 991 dam³, a lake area of 1 km² at normal water level and a lake volume of 7 hm³. The water resources of this dam lake, which is approximately 35 m above sea level, are rainwater and the Ürkmez stream, which gives its name to the dam. The aim of this study was to determine the phytoplankton composition of Ürkmez Dam Lake (İzmir-Türkiye) and to carried out the seasonal changes in phytoplankton. For this study, phytoplankton samples were taken from a selected sampling point at monthly intervals between March 2014 and February 2015 and some physical parameters were measured in situ. Temperature measurements in the surface, middle and bottom waters of Ürkmez Dam Lake showed changes between 9.0-28.3 oC at the surface, 8.8-27.4 oC at the middle depth and 8.6-16.6 oC at the bottom. Depth varied between 10-23 m and Secchi depth varied between 0.6-3.6 m. A total of 28 taxa belonging to the divisions Cyanobacteria (5 taxa), Chlorophyta (7 taxa), Myzozoa (3 taxa), Euglenozoa (4 taxa), Ochrophyta-Bacillariophyceae (6 taxa), Ochrophyta-Chrysophyceae (2 taxa) and Cryptophyta (1 taxa) were identified in Ürkmez Dam Lake during the study period. These findings have contributed to the literature revealing the freshwater algal flora and distribution of Türkiye. It was evaluated that these taxa are commonly observed in Turkish dam lakes and are mostly compatible with aquatic ecosystems with mesotrophic and unstable water column.
- Open Access
- 20 February 2025
- Published by Wiley in Macromolecular Rapid Communications
- Vol. 46 (13) , e2401033
From Reduction To Remediation: Sustainable Use of Algal Fibrous Mats for Silver Nanoparticle Synthesis and Dye Removal
Biogenic synthesis of metal nanoparticles offers a sustainable alternative to traditional methods that often rely on toxic reducing agents, offering an environmentally friendly approach to nanoparticle production. The use of nanofibrous substrates, algal nanofibers (Polyacrylonitrile (PAN)/ Cystoseira barbata ( Cb )), for the reduction process enhances the efficiency of nanoparticle formation, providing a larger surface area for reaction and ensuring uniform distribution of the synthesized nanoparticles. Following the biogenic synthesis of Ag nanoparticles and their stabilization with xanthan gum (XG), the resulting PAN/ Cb /Ag@XG nanofibrous catalyst demonstrates excellent reusability, maintaining its activity and structural integrity even after multiple cycles of use. The stabilization with XG also ensures long‐term shelf life by preventing nanoparticle aggregation. Additionally, the nanofibrous material exhibits antimicrobial activity against E. coli and S. aureus . Its dual functionality—targeting harmful pathogens while avoiding secondary pollution—positions them as a sustainable and eco‐friendly solution for advanced water purification and disinfection systems.
- 20 February 2025
- Published by Wiley in Macromolecular Rapid Communications
- Vol. 46 (13) , e2401033
Open AccessFrom Reduction To Remediation: Sustainable Use of Algal Fibrous Mats for Silver Nanoparticle Synthesis and Dye Removal
Biogenic synthesis of metal nanoparticles offers a sustainable alternative to traditional methods that often rely on toxic reducing agents, offering an environmentally friendly approach to nanoparticle production. The use of nanofibrous substrates, algal nanofibers (Polyacrylonitrile (PAN)/ Cystoseira barbata ( Cb )), for the reduction process enhances the efficiency of nanoparticle formation, providing a larger surface area for reaction and ensuring uniform distribution of the synthesized nanoparticles. Following the biogenic synthesis of Ag nanoparticles and their stabilization with xanthan gum (XG), the resulting PAN/ Cb /Ag@XG nanofibrous catalyst demonstrates excellent reusability, maintaining its activity and structural integrity even after multiple cycles of use. The stabilization with XG also ensures long‐term shelf life by preventing nanoparticle aggregation. Additionally, the nanofibrous material exhibits antimicrobial activity against E. coli and S. aureus . Its dual functionality—targeting harmful pathogens while avoiding secondary pollution—positions them as a sustainable and eco‐friendly solution for advanced water purification and disinfection systems.
- 1 September 2024
- Published by Izmir UOD
Preliminary Insights into Challenges in Electrospun Nanofibers from Hemp-Derived Cellulose
In this study, the fabrication of nanofibers from hemp-derived cellulose and cellulose acetate using electrospinning was investigated. Various solvent mixtures and concentrations were investigated to determine the optimum conditions for dissolving cellulose samples. The morphological and structural analyses of the cellulose and cellulose acetates were conducted using Scanning Electron Microscopy (SEM), Fourier Transform Infrared Spectroscopy (FTIR), X-ray Diffraction (XRD), and Thermogravimetric Analysis (TGA). Additionally, the adsorption efficiency of cellulose acetate for methylene blue (MB), a common dye pollutant, was evaluated. This aspect of the study highlights the potential environmental applications of hemp-derived cellulose derivatives in wastewater treatment.
- 1 September 2024
- Published by Izmir UOD
Preliminary Insights into Challenges in Electrospun Nanofibers from Hemp-Derived Cellulose
In this study, the fabrication of nanofibers from hemp-derived cellulose and cellulose acetate using electrospinning was investigated. Various solvent mixtures and concentrations were investigated to determine the optimum conditions for dissolving cellulose samples. The morphological and structural analyses of the cellulose and cellulose acetates were conducted using Scanning Electron Microscopy (SEM), Fourier Transform Infrared Spectroscopy (FTIR), X-ray Diffraction (XRD), and Thermogravimetric Analysis (TGA). Additionally, the adsorption efficiency of cellulose acetate for methylene blue (MB), a common dye pollutant, was evaluated. This aspect of the study highlights the potential environmental applications of hemp-derived cellulose derivatives in wastewater treatment.
- 11 July 2024
- Published by American Chemical Society (ACS) in ACS Applied Bio Materials
- Vol. 7 (8) , 5345-5358
Seaweed Superheroes: Cystoseira barbata-Incorporated Electrospun Fibers for Lead Ion Sequestration
The efficient removal of lead ions at low concentrations is paramount in combating the significant threat posed by water pollution resulting from industrial activities and population growth. In this study, electrospun C. barbata/PAN fibers were developed to efficiently remove lead(II) ions from water. The morphology, structure, and mechanical properties of the fibers were examined, highlighting that the augmentation of the surface area through the conversion of C. barbata into the polymer fibers facilitates increased metal bonding sites during sorption. C. barbata/PAN fibers exhibited superior characteristics, including higher surface area, smaller pore size, and increased pore volume, compared to powdered C. barbata. The effects of factors such as shaking time, algae percentage, sorbent amount, pH, metal concentration, and temperature on Pb(II) sorption were investigated by the batch method. At an initial ion concentration of 100 μg L-1 and pH 4.0, C. barbata (5 wt %)/PAN fiber demonstrated a notable sorption efficiency of 89-90% (270 μg/g) after 60 min. The equilibrium data align with the Freundlich and Dubinin-Radushkevich isotherm models, whereas the pseudo-second-order kinetic model provides the most suitable description. The characterization of fibers after sorption revealed that carboxyl, hydroxyl, and sulfonyl groups play an active role in Pb(II) sorption.
- 11 July 2024
- Published by American Chemical Society (ACS) in ACS Applied Bio Materials
- Vol. 7 (8) , 5345-5358
Seaweed Superheroes: Cystoseira barbata-Incorporated Electrospun Fibers for Lead Ion Sequestration
The efficient removal of lead ions at low concentrations is paramount in combating the significant threat posed by water pollution resulting from industrial activities and population growth. In this study, electrospun C. barbata/PAN fibers were developed to efficiently remove lead(II) ions from water. The morphology, structure, and mechanical properties of the fibers were examined, highlighting that the augmentation of the surface area through the conversion of C. barbata into the polymer fibers facilitates increased metal bonding sites during sorption. C. barbata/PAN fibers exhibited superior characteristics, including higher surface area, smaller pore size, and increased pore volume, compared to powdered C. barbata. The effects of factors such as shaking time, algae percentage, sorbent amount, pH, metal concentration, and temperature on Pb(II) sorption were investigated by the batch method. At an initial ion concentration of 100 μg L-1 and pH 4.0, C. barbata (5 wt %)/PAN fiber demonstrated a notable sorption efficiency of 89-90% (270 μg/g) after 60 min. The equilibrium data align with the Freundlich and Dubinin-Radushkevich isotherm models, whereas the pseudo-second-order kinetic model provides the most suitable description. The characterization of fibers after sorption revealed that carboxyl, hydroxyl, and sulfonyl groups play an active role in Pb(II) sorption.
- 22 August 2022
- Published by Elsevier in Materials Today Communications
- Vol. 33
Algal nanofibers: Current status and recent developments
- 22 August 2022
- Published by Elsevier in Materials Today Communications
- Vol. 33
Algal nanofibers: Current status and recent developments
- 29 December 2020
- Published by Journal of Limnology and Freshwater Fisheries Research in Journal of Limnology and Freshwater Fisheries Research
- Vol. 6 (3) , 231-237
Çalı Ağız Cüce Vatozun (Ancistrus dolichopterus) Akvaryum Koşullarında Üremesi ve Gelişimi Üzerine Bir Ön Çalışma
Dwarf suckermouth catfish are preferred especially for small aquariums. They are usually referred to as tank cleaners and commonly traded in the ornamental fish sector. Since these fish are nocturnal, it is difficult to observe their reproductive behavior and larval development. This study was carried out to determine the reproductive variables of bushymouth catfish (Ancistrus dolichopterus) under aquarium conditions. Three broodstocks bushymouth catfish with an average initial weight and a total length of 10.5±0.3 g and 9.5±0.2 cm were stocked in three 240-L aquariums with the ratio of 1:2 (male: female). The observations were made in triplicate tanks for six months. Females laid an average of 39.78±0.41 eggs and fertilization and hatching rates were 75.05% and 62.94%, respectively. It was found that the transition time from egg to apparently larval stage was 105.28 h, and bushymouth catfish showed an indistinguishable development from the hatching to juvenile stage without a real larval transition stage. The results of the study provide basic information on the reproductive performance and early development of bushymouth catfish.
- 29 December 2020
- Published by Journal of Limnology and Freshwater Fisheries Research in Journal of Limnology and Freshwater Fisheries Research
- Vol. 6 (3) , 231-237
Çalı Ağız Cüce Vatozun (Ancistrus dolichopterus) Akvaryum Koşullarında Üremesi ve Gelişimi Üzerine Bir Ön Çalışma
Dwarf suckermouth catfish are preferred especially for small aquariums. They are usually referred to as tank cleaners and commonly traded in the ornamental fish sector. Since these fish are nocturnal, it is difficult to observe their reproductive behavior and larval development. This study was carried out to determine the reproductive variables of bushymouth catfish (Ancistrus dolichopterus) under aquarium conditions. Three broodstocks bushymouth catfish with an average initial weight and a total length of 10.5±0.3 g and 9.5±0.2 cm were stocked in three 240-L aquariums with the ratio of 1:2 (male: female). The observations were made in triplicate tanks for six months. Females laid an average of 39.78±0.41 eggs and fertilization and hatching rates were 75.05% and 62.94%, respectively. It was found that the transition time from egg to apparently larval stage was 105.28 h, and bushymouth catfish showed an indistinguishable development from the hatching to juvenile stage without a real larval transition stage. The results of the study provide basic information on the reproductive performance and early development of bushymouth catfish.