Makoto Sasaki
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Previous Organizations / Institutes
The organizations / institutes from the scholar's other articles in the past ten years
Makoto Sasaki has a total of 20 co-authors. Here are the top co-authors by number of shared publications:
- Mitsuhiro Ebara
National Institute for Materials Science (NIMS)
5 shared publications - Ahmed Nabil
National Institute for Materials Science (NIMS)
1 shared publication Ayano Konagai
Research and Development Division, Kureha Corporation, 16 Ochiai, Nishiki-machi, Iwaki, Fukushima, 974-8686, Japan
1 shared publication- Erika Yoshihara
Cellular and Molecular Biotechnology Research Institute (CMB), National Institute of Advanced Industrial Science and Technology (AIST), Tsukuba Central 5, 1-1-1 Higashi, Tsukuba, Ibaraki 305-8565, Japan
1 shared publication Feng-Huei Lin
1 shared publication- Hiroyuki Harada
Graduate School of Comprehensive and Scientific Research, Prefectural University of Hiroshima, Shobara 727-0023, Japan
1 shared publication
Latest Publications
- Open Access
- 31 March 2025
- Published by Royal Society of Chemistry (RSC) in Chemical Communications
- Vol. 61 (33) , 6126-6129
Effect of nanosizing on sodium cobalt( ii ) hexacyanoferrate( ii ) nanoparticles in nanofibers for enhanced ammonium adsorption capacity
In this study, sodium cobalt( ii ) hexacyanoferrate( ii ) (NaCoHCF) nanoparticles were synthesized and incorporated into electrospun nanofibers to enhance their ammonium adsorption capacity.
- 31 March 2025
- Published by Royal Society of Chemistry (RSC) in Chemical Communications
- Vol. 61 (33) , 6126-6129
Open AccessEffect of nanosizing on sodium cobalt( ii ) hexacyanoferrate( ii ) nanoparticles in nanofibers for enhanced ammonium adsorption capacity
In this study, sodium cobalt( ii ) hexacyanoferrate( ii ) (NaCoHCF) nanoparticles were synthesized and incorporated into electrospun nanofibers to enhance their ammonium adsorption capacity.
- 25 November 2024
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 16 (49) , 67399-67410
Double-Layered Electrospun Nanofiber Filter for the Simultaneous Removal of Urea and Ammonium from Blood
A major challenge in the development of wearable artificial kidneys (WAKs) lies in the efficient removal of urea, which is found at an extremely high concentration in the blood of patients with chronic kidney disease (CKD). Urease is an enzyme that hydrolyzes urea. While it can efficiently remove urea, toxic ammonium is produced as a byproduct. In this study, nanofibers capable of removing both urea and ammonium from the blood were fabricated. Specifically, urease was immobilized on electrospun poly(ethylene-co-vinyl alcohol) (EVOH)/chitosan nanofiber membranes via covalent cross-linking. Chitosan not only helped covalent immobilization via its free amino groups but also improved hemocompatibility by suppressing protein adhesion. The resulting urease-immobilized EVOH/chitosan nanofibers exhibited an outstanding urea removal performance of 690 mg/g per hour. For ammonium removal, EVOH nanofiber membranes containing sodium cobalt(II) hexacyanoferrate(II) (NaCoHCF), an ammonium adsorbent, were prepared. The fabricated EVOH/NaCoHCF membranes exhibited an ammonium adsorption capacity of 135.5 mg/g. The two types of nanofiber membranes were combined to form a double-layered nanofiber membrane that was placed in a filter holder for continuous-flow cycling experiments. Under such conditions, all urea at a concentration similar to that in the blood of CKD patients was degraded within 1 h, and ammonium production was reduced by approximately 90% of the normal level. This double-layered nanofiber membrane can achieve both urea degradation and ammonium adsorption and is expected to advance the development of WAKs, a game changer in the treatment of CKD.
- 25 November 2024
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 16 (49) , 67399-67410
Double-Layered Electrospun Nanofiber Filter for the Simultaneous Removal of Urea and Ammonium from Blood
A major challenge in the development of wearable artificial kidneys (WAKs) lies in the efficient removal of urea, which is found at an extremely high concentration in the blood of patients with chronic kidney disease (CKD). Urease is an enzyme that hydrolyzes urea. While it can efficiently remove urea, toxic ammonium is produced as a byproduct. In this study, nanofibers capable of removing both urea and ammonium from the blood were fabricated. Specifically, urease was immobilized on electrospun poly(ethylene-co-vinyl alcohol) (EVOH)/chitosan nanofiber membranes via covalent cross-linking. Chitosan not only helped covalent immobilization via its free amino groups but also improved hemocompatibility by suppressing protein adhesion. The resulting urease-immobilized EVOH/chitosan nanofibers exhibited an outstanding urea removal performance of 690 mg/g per hour. For ammonium removal, EVOH nanofiber membranes containing sodium cobalt(II) hexacyanoferrate(II) (NaCoHCF), an ammonium adsorbent, were prepared. The fabricated EVOH/NaCoHCF membranes exhibited an ammonium adsorption capacity of 135.5 mg/g. The two types of nanofiber membranes were combined to form a double-layered nanofiber membrane that was placed in a filter holder for continuous-flow cycling experiments. Under such conditions, all urea at a concentration similar to that in the blood of CKD patients was degraded within 1 h, and ammonium production was reduced by approximately 90% of the normal level. This double-layered nanofiber membrane can achieve both urea degradation and ammonium adsorption and is expected to advance the development of WAKs, a game changer in the treatment of CKD.
- Open Access
- 16 August 2024
- Published by Royal Society of Chemistry (RSC) in RSC Advances
- Vol. 14 (36) , 26596-26603
Electrospun EVOH/AST-120 hybrid nanofiber membranes for removal of indoxyl sulfate from blood
Nanofibers containing activated carbon using poly(ethylene-co-vinyl alcohol) (EVOH) were prepared to remove indoxyl sulfate (IS) from the blood.
- 16 August 2024
- Published by Royal Society of Chemistry (RSC) in RSC Advances
- Vol. 14 (36) , 26596-26603
Open AccessElectrospun EVOH/AST-120 hybrid nanofiber membranes for removal of indoxyl sulfate from blood
Nanofibers containing activated carbon using poly(ethylene-co-vinyl alcohol) (EVOH) were prepared to remove indoxyl sulfate (IS) from the blood.
- Open Access
Temperature Responsive Polymer Conjugate Prepared by “Grafting from” Proteins toward the Adsorption and Removal of Uremic Toxin
In this study, temperature-responsive polymer-protein conjugate was synthesized using a “grafting from” concept by introducing a chain transfer agent (CTA) into bovine serum albumin (BSA). The BSA-CTA was used as a starting point for poly(N-isopropylacrylamide) (PNIPAAm) through reversible addition-fragmentation chain transfer polymerization. The research investigations suggest that the thermally responsive behavior of PNIPAAm was controlled by the monomer ratio to CTA, as well as the amount of CTA introduced to BSA. The study further synthesized the human serum albumin (HSA)-PNIPAAm conjugate, taking the advantage that HSA can specifically adsorb indoxyl sulfate (IS) as a uremic toxin. The HSA-PNIPAAm conjugate could capture IS and decreased the concentration by about 40% by thermal precipitation. It was also revealed that the protein activity was not impaired by the conjugation with PNIPAAm. The proposed strategy is promising in not only removal of uremic toxins but also enrichment of biomarkers for early diagnostic applications.
Open AccessTemperature Responsive Polymer Conjugate Prepared by “Grafting from” Proteins toward the Adsorption and Removal of Uremic Toxin
In this study, temperature-responsive polymer-protein conjugate was synthesized using a “grafting from” concept by introducing a chain transfer agent (CTA) into bovine serum albumin (BSA). The BSA-CTA was used as a starting point for poly(N-isopropylacrylamide) (PNIPAAm) through reversible addition-fragmentation chain transfer polymerization. The research investigations suggest that the thermally responsive behavior of PNIPAAm was controlled by the monomer ratio to CTA, as well as the amount of CTA introduced to BSA. The study further synthesized the human serum albumin (HSA)-PNIPAAm conjugate, taking the advantage that HSA can specifically adsorb indoxyl sulfate (IS) as a uremic toxin. The HSA-PNIPAAm conjugate could capture IS and decreased the concentration by about 40% by thermal precipitation. It was also revealed that the protein activity was not impaired by the conjugation with PNIPAAm. The proposed strategy is promising in not only removal of uremic toxins but also enrichment of biomarkers for early diagnostic applications.
- Open Access
Zeolite Composite Nanofiber Mesh for Indoxyl Sulfate Adsorption toward Wearable Blood Purification Devices
A nanofiber mesh was prepared for the adsorption of indoxyl sulfate (IS), a toxin associated with chronic kidney disease. Removing IS is highly demanded for efficient blood purification. The objective of this study is to develop a zeolite composite nanofiber mesh to remove IS efficiently. Eight zeolites with different properties were used for IS adsorption, where a zeolite with a pore size of 7 Å, H+ cations, and a silica to aluminum ratio of 240 mol/mol exhibited the highest adsorption capacity. This was primarily attributed to its suitable silica to aluminum ratio. The zeolites were incorporated in biocompatible poly (ethylene-co-vinyl alcohol) (EVOH) nanofibers, and a zeolite composite nanofiber mesh was successfully fabricated via electrospinning. The nanofiber mesh exhibited an IS adsorption capacity of 107 μg/g, while the adsorption capacity by zeolite increased from 208 μg/g in powder form to 386 μg/g when dispersed in the mesh. This also led to an increase in cell viability from 86% to 96%. These results demonstrated that this zeolite composite nanofiber mesh can be safely and effectively applied in wearable blood purification devices.
Open AccessZeolite Composite Nanofiber Mesh for Indoxyl Sulfate Adsorption toward Wearable Blood Purification Devices
A nanofiber mesh was prepared for the adsorption of indoxyl sulfate (IS), a toxin associated with chronic kidney disease. Removing IS is highly demanded for efficient blood purification. The objective of this study is to develop a zeolite composite nanofiber mesh to remove IS efficiently. Eight zeolites with different properties were used for IS adsorption, where a zeolite with a pore size of 7 Å, H+ cations, and a silica to aluminum ratio of 240 mol/mol exhibited the highest adsorption capacity. This was primarily attributed to its suitable silica to aluminum ratio. The zeolites were incorporated in biocompatible poly (ethylene-co-vinyl alcohol) (EVOH) nanofibers, and a zeolite composite nanofiber mesh was successfully fabricated via electrospinning. The nanofiber mesh exhibited an IS adsorption capacity of 107 μg/g, while the adsorption capacity by zeolite increased from 208 μg/g in powder form to 386 μg/g when dispersed in the mesh. This also led to an increase in cell viability from 86% to 96%. These results demonstrated that this zeolite composite nanofiber mesh can be safely and effectively applied in wearable blood purification devices.
- Open Access
- 1 January 2017
- Published by Ceramic Society of Japan in Journal of the Ceramic Society of Japan
- Vol. 125 (3) , 150-154
Structure and light emission of scheelite-type ACe(WO4)2 (A = Li, Na, or K)
In this study, KCe(WO4)2 was synthesized by a solid-state reaction of K2CO3, CeO2, and WO3 at 1273 K for 12 h. The Rietveld refinement of this sample confirmed the scheelite-type (tetragonal) structure for KCe(WO4)2, with a I41/a space group and lattice parameters a = 542.4 pm and c = 1207 pm. The lattice parameters for ACe(WO4)2 (A = Li, Na, or K) were in agreement with the ionic radii of the alkali metal ions, but the W–O distance in KCe(WO4)2 was found to be shorter than those in the other compounds, indicative of the distortion of WO42–, attributed to the larger ionic radius of K+. All of the synthesized ACe(WO4)2 materials exhibited fluorescence, with the relative emission intensity decreasing in the order of KCe(WO4)2 > NaCe(WO4)2 > LiCe(WO4)2.
- 1 January 2017
- Published by Ceramic Society of Japan in Journal of the Ceramic Society of Japan
- Vol. 125 (3) , 150-154
Open AccessStructure and light emission of scheelite-type ACe(WO4)2 (A = Li, Na, or K)
In this study, KCe(WO4)2 was synthesized by a solid-state reaction of K2CO3, CeO2, and WO3 at 1273 K for 12 h. The Rietveld refinement of this sample confirmed the scheelite-type (tetragonal) structure for KCe(WO4)2, with a I41/a space group and lattice parameters a = 542.4 pm and c = 1207 pm. The lattice parameters for ACe(WO4)2 (A = Li, Na, or K) were in agreement with the ionic radii of the alkali metal ions, but the W–O distance in KCe(WO4)2 was found to be shorter than those in the other compounds, indicative of the distortion of WO42–, attributed to the larger ionic radius of K+. All of the synthesized ACe(WO4)2 materials exhibited fluorescence, with the relative emission intensity decreasing in the order of KCe(WO4)2 > NaCe(WO4)2 > LiCe(WO4)2.
- Open Access
- 1 January 2007
- Published by Japan Society of Mechanical Engineers in The Proceedings of Conference of Hokkaido Branch
- Vol. 2007.46, 121-122
414 Development of combustion furnace for FRP recycling
- 1 January 2007
- Published by Japan Society of Mechanical Engineers in The Proceedings of Conference of Hokkaido Branch
- Vol. 2007.46, 121-122
Open Access414 Development of combustion furnace for FRP recycling
- 1 February 1990
- Published by IOP Publishing in Japanese Journal of Applied Physics
- Vol. 29 (2A) , L358
Low-Temperature Growth of Polycrystalline AlN Films by Microwave Plasma CVD
The growth of polycrystalline AlN film at a rate of 60 nm·min-1 was accomplished at a substrate temperature of 550°C by a coaxial-line-type microwave plasma chemical vapor deposition (CVD) method using the AlBr3-H2-N2 gas system. Excellent c-axis orientation was observed on the film having a half-width rocking curve of (001)AlN (Δθ50) of 2.1 degrees. No carbon or bromine was detected by the AES measurements.
- 1 February 1990
- Published by IOP Publishing in Japanese Journal of Applied Physics
- Vol. 29 (2A) , L358
Low-Temperature Growth of Polycrystalline AlN Films by Microwave Plasma CVD
The growth of polycrystalline AlN film at a rate of 60 nm·min-1 was accomplished at a substrate temperature of 550°C by a coaxial-line-type microwave plasma chemical vapor deposition (CVD) method using the AlBr3-H2-N2 gas system. Excellent c-axis orientation was observed on the film having a half-width rocking curve of (001)AlN (Δθ50) of 2.1 degrees. No carbon or bromine was detected by the AES measurements.