Eve McGlynn
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Eve McGlynn has a total of 7 co-authors. Here are the top co-authors by number of shared publications:
- Hadi Heidari
University of Glasgow
3 shared publications - Rupam Das
Department of Biomedical Engineering, University of Ulsan, Ulsan, South Korea
3 shared publications - Finlay Walton
School of Chemistry, University of Glasgow, Glasgow, G12 8QQ, UK
2 shared publications - María Cerezo-Sánchez
Microelectronics Lab, James Watt School of Engineering, University of Glasgow, Glasgow, G12 8QQ, UK
1 shared publication - Mengyao Yuan
School of Materials and Energy and the State Key Laboratory of Electronic Thin Films and Integrated Devices, Medico-Engineering Cooperation on Applied Medicine Research Center, University of Electronic Science and Technology of China, Chengdu, China
1 shared publication - Qammer Hussain Abbasi
James Watt School of Engineering, University of Glasgow, Glasgow, UK
1 shared publication
Latest Publications
- Open Access
- 6 June 2022
- Published by The Royal Society in Philosophical Transactions of the Royal Society A: Mathematical, Physical and Engineering Sciences
- Vol. 380 (2228) , 20210009
Cleanroom strategies for micro- and nano-fabricating flexible implantable neural electronics
Implantable electronic neural interfaces typically take the form of probes and are made with rigid materials such as silicon and metals. These have advantages such as compatibility with integrated microchips, simple implantation and high-density nanofabrication but tend to be lacking in terms of biointegration, biocompatibility and durability due to their mechanical rigidity. This leads to damage to the device or, more importantly, the brain tissue surrounding the implant. Flexible polymer-based probes offer superior biocompatibility in terms of surface biochemistry and better matched mechanical properties. Research which aims to bring the fabrication of electronics on flexible polymer substrates to the nano-regime is remarkably sparse, despite the push for flexible consumer electronics in the last decade or so. Cleanroom-based nanofabrication techniques such as photolithography have been used as pattern transfer methods by the semiconductor industry to produce single nanometre scale devices and are now also used for making flexible circuit boards. There is still much scope for miniaturizing flexible electronics further using photolithography, bringing the possibility of nanoscale, non-invasive, high-density flexible neural interfacing. This work explores the fabrication challenges of using photolithography and complementary techniques in a cleanroom for producing flexible electronic neural probes with nanometre-scale features. This article is part of the theme issue 'Advanced neurotechnologies: translating innovation for health and well-being'.
- 6 June 2022
- Published by The Royal Society in Philosophical Transactions of the Royal Society A: Mathematical, Physical and Engineering Sciences
- Vol. 380 (2228) , 20210009
Open AccessCleanroom strategies for micro- and nano-fabricating flexible implantable neural electronics
Implantable electronic neural interfaces typically take the form of probes and are made with rigid materials such as silicon and metals. These have advantages such as compatibility with integrated microchips, simple implantation and high-density nanofabrication but tend to be lacking in terms of biointegration, biocompatibility and durability due to their mechanical rigidity. This leads to damage to the device or, more importantly, the brain tissue surrounding the implant. Flexible polymer-based probes offer superior biocompatibility in terms of surface biochemistry and better matched mechanical properties. Research which aims to bring the fabrication of electronics on flexible polymer substrates to the nano-regime is remarkably sparse, despite the push for flexible consumer electronics in the last decade or so. Cleanroom-based nanofabrication techniques such as photolithography have been used as pattern transfer methods by the semiconductor industry to produce single nanometre scale devices and are now also used for making flexible circuit boards. There is still much scope for miniaturizing flexible electronics further using photolithography, bringing the possibility of nanoscale, non-invasive, high-density flexible neural interfacing. This work explores the fabrication challenges of using photolithography and complementary techniques in a cleanroom for producing flexible electronic neural probes with nanometre-scale features. This article is part of the theme issue 'Advanced neurotechnologies: translating innovation for health and well-being'.
- Open Access
- 6 June 2022
- Published by The Royal Society in Philosophical Transactions of the Royal Society A: Mathematical, Physical and Engineering Sciences
- Vol. 380 (2228) , 20210007
Neural microprobe modelling and microfabrication for improved implantation and mechanical failure mitigation
Careful design and material selection are the most beneficial strategies to ensure successful implantation and mitigate the failure of a neural probe in the long term. In order to realize a fully flexible implantable system, the probe should be easily manipulated by neuroscientists, with the potential to bend up to 90°. This paper investigates the impact of material choice, probe geometry, and crucially, implantation angle on implantation success through finite-element method simulations in COMSOL Multiphysics followed by cleanroom microfabrication. The designs introduced in this paper were fabricated using two polyimides: (i) PI-2545 as a release layer and (ii) photodefinable HD-4110 as the probe substrate. Four different designs were microfabricated, and the implantation tests were compared between an agarose brain phantom and lamb brain samples. The probes were scanned in a 7 T PharmaScan MRI coil to investigate potential artefacts. From the simulation, a triangular base and 50 µm polymer thickness were identified as the optimum design, which produced a probe 57.7 µm thick when fabricated. The probes exhibit excellent flexibility, exemplified in three-point bending tests performed with a DAGE 4000Plus. Successful implantation is possible for a range of angles between 30° and 90°. This article is part of the theme issue ‘Advanced neurotechnologies: translating innovation for health and well-being’.
- 6 June 2022
- Published by The Royal Society in Philosophical Transactions of the Royal Society A: Mathematical, Physical and Engineering Sciences
- Vol. 380 (2228) , 20210007
Open AccessNeural microprobe modelling and microfabrication for improved implantation and mechanical failure mitigation
Careful design and material selection are the most beneficial strategies to ensure successful implantation and mitigate the failure of a neural probe in the long term. In order to realize a fully flexible implantable system, the probe should be easily manipulated by neuroscientists, with the potential to bend up to 90°. This paper investigates the impact of material choice, probe geometry, and crucially, implantation angle on implantation success through finite-element method simulations in COMSOL Multiphysics followed by cleanroom microfabrication. The designs introduced in this paper were fabricated using two polyimides: (i) PI-2545 as a release layer and (ii) photodefinable HD-4110 as the probe substrate. Four different designs were microfabricated, and the implantation tests were compared between an agarose brain phantom and lamb brain samples. The probes were scanned in a 7 T PharmaScan MRI coil to investigate potential artefacts. From the simulation, a triangular base and 50 µm polymer thickness were identified as the optimum design, which produced a probe 57.7 µm thick when fabricated. The probes exhibit excellent flexibility, exemplified in three-point bending tests performed with a DAGE 4000Plus. Successful implantation is possible for a range of angles between 30° and 90°. This article is part of the theme issue ‘Advanced neurotechnologies: translating innovation for health and well-being’.
- 27 January 2021
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Sensors Journal
- Vol. 21 (11) , 12484-12497
Wireless Communication and Power Harvesting in Wearable Contact Lens Sensors
The human eye contains multiple biomarkers related to various diseases, making electronic contact lens an ideal non-invasive platform for their diagnosis and treatment. Recent advances in technology have enabled the monitoring and diagnosis of glaucoma from Intraocular Pressure (IOP) detection, diabetes from glucose concentration detections, and other biosensors for pH and temperature sensing. Different sensor designs have led to distinct power transfer techniques, among which inductively coupled power transfer is considered most favourable for electronic contact lenses power delivery applications. Therefore, loop antenna, spiral shape antenna, and antenna with nanomaterials such as graphene and hybrid silver nanofibers have been explored under Industrial, Scientific, and Medical (ISM) frequency bands for both Wireless Power Transfer (WPT) and data communication. Notably, spiral antennas are also considered as the component of IOP sensing using capacitive sensors to detect the changes in frequency caused by pressure. This article reviews the state-of-the-art technologies in electronic contact lens sensors and their power delivery techniques. Herein, diverse sensing methods, materials, and power transfer techniques and the promising future trends and challenges in electronic contact lenses have been presented.
- 27 January 2021
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Sensors Journal
- Vol. 21 (11) , 12484-12497
Wireless Communication and Power Harvesting in Wearable Contact Lens Sensors
The human eye contains multiple biomarkers related to various diseases, making electronic contact lens an ideal non-invasive platform for their diagnosis and treatment. Recent advances in technology have enabled the monitoring and diagnosis of glaucoma from Intraocular Pressure (IOP) detection, diabetes from glucose concentration detections, and other biosensors for pH and temperature sensing. Different sensor designs have led to distinct power transfer techniques, among which inductively coupled power transfer is considered most favourable for electronic contact lenses power delivery applications. Therefore, loop antenna, spiral shape antenna, and antenna with nanomaterials such as graphene and hybrid silver nanofibers have been explored under Industrial, Scientific, and Medical (ISM) frequency bands for both Wireless Power Transfer (WPT) and data communication. Notably, spiral antennas are also considered as the component of IOP sensing using capacitive sensors to detect the changes in frequency caused by pressure. This article reviews the state-of-the-art technologies in electronic contact lens sensors and their power delivery techniques. Herein, diverse sensing methods, materials, and power transfer techniques and the promising future trends and challenges in electronic contact lenses have been presented.