Leninisha Shanmugam
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Leninisha Shanmugam has a total of 32 co-authors. Here are the top co-authors by number of shared publications:
- Nirmala Venkatachalam
Easwari Engineering College
3 shared publications - Heltin Genitha Cyril
Department of Information Technology, St. Joseph’s College of Engineering, Chennai 600119, Tamil Nadu, India
2 shared publications Vani Kaliaperumal
Department of IST Anna University, College of Engineering Chennai Tamil Nadu 600025 India
2 shared publicationsA. L Agasta Adline
Department of IT, Easwari Engineering College
1 shared publicationA. L. Agasta Adline
Anna University, Chennai, TamilNadu, India
1 shared publicationAishwarya Natarajan
Department of IT Easwari Engineering College Bharathi Salai, Ramapuram Chennai Tamil Nadu 600089 India
1 shared publication
Latest Publications
- Open Access
- 15 October 2026
- Published by Frontiers Media SA in Frontiers in Plant Science
- Vol. 17, 1893779
An integrated instance segmentation and deep feature fusion model for robust leaf species classification in natural environments
Introduction: The recognition of leaf segments and species in nature is a difficult process due to the changes in brightness, too much clutter in the background, and the overlapping of leaves due to which the accuracy falls down for 20-40% when using laboratory scans instead of field-ready applications. Methods: This research presents a unified framework of deep learning that includes Mask R-CNN -based instance segmentation and deep feature fusion in order to overcome this problem. The process of extracting a number of leaves took place through Detectron2 and the excessive stream extractor that included ResNet-50 and VGG-16 used in conjunction with other descriptive methods allowed providing a joint representation of 6,148 dimensions. The classifier was trained according to three methods: Baseline, PSO (particle swarm optimization), and Grid search. Results: The masked fusion system cut off the noise in the background while retaining the important botanical features with the help of achieving the mean Intersection-over-Union equal to 0.752, detection precision of 98.39%, and mAP@0.5 of 0.8291. The ResNet-50 model enhanced with PSO techniques has the best performance among other technologies based on ResNet-50 (90% accuracy, F1 score 0.9002), while the technology of Grid search revealed a little higher result for the special techniques such as ResNet-50 plus traditional features (F1 score = 0.9135) which means that the efficiency of the methodology is contingent to the type of the features not the fact if the technology is better than the other. Discussion: Comparative and ablation data analysis proved the efficiency of the instance segmentation used in combination with multi-mode fusion especially when used in occlusion-prone conditions. The system offers a scalable application for smart agriculture and biodiversity monitoring while being a good example of bridging the gap in automated environmental intelligence.
- 15 October 2026
- Published by Frontiers Media SA in Frontiers in Plant Science
- Vol. 17, 1893779
Open AccessAn integrated instance segmentation and deep feature fusion model for robust leaf species classification in natural environments
Introduction: The recognition of leaf segments and species in nature is a difficult process due to the changes in brightness, too much clutter in the background, and the overlapping of leaves due to which the accuracy falls down for 20-40% when using laboratory scans instead of field-ready applications. Methods: This research presents a unified framework of deep learning that includes Mask R-CNN -based instance segmentation and deep feature fusion in order to overcome this problem. The process of extracting a number of leaves took place through Detectron2 and the excessive stream extractor that included ResNet-50 and VGG-16 used in conjunction with other descriptive methods allowed providing a joint representation of 6,148 dimensions. The classifier was trained according to three methods: Baseline, PSO (particle swarm optimization), and Grid search. Results: The masked fusion system cut off the noise in the background while retaining the important botanical features with the help of achieving the mean Intersection-over-Union equal to 0.752, detection precision of 98.39%, and mAP@0.5 of 0.8291. The ResNet-50 model enhanced with PSO techniques has the best performance among other technologies based on ResNet-50 (90% accuracy, F1 score 0.9002), while the technology of Grid search revealed a little higher result for the special techniques such as ResNet-50 plus traditional features (F1 score = 0.9135) which means that the efficiency of the methodology is contingent to the type of the features not the fact if the technology is better than the other. Discussion: Comparative and ablation data analysis proved the efficiency of the instance segmentation used in combination with multi-mode fusion especially when used in occlusion-prone conditions. The system offers a scalable application for smart agriculture and biodiversity monitoring while being a good example of bridging the gap in automated environmental intelligence.
- Open Access
- 21 September 2026
- Published by Springer Nature in Scientific Reports
Dual-path feature extraction with transformer classifier for leaf disease classification
- 21 September 2026
- Published by Springer Nature in Scientific Reports
Open AccessDual-path feature extraction with transformer classifier for leaf disease classification
- 3 May 2026
- Published by Springer Nature in Archives of Computational Methods in Engineering
- Vol. 33 (6) , 1-19
Deep Learning and Explainable AI for Ovarian Cancer Detection: A Comprehensive Literature Review
- 3 May 2026
- Published by Springer Nature in Archives of Computational Methods in Engineering
- Vol. 33 (6) , 1-19
Deep Learning and Explainable AI for Ovarian Cancer Detection: A Comprehensive Literature Review
- 30 November 2023
- Published by Taylor & Francis
- p. 1-16
IoT Next Gen and the World of Big Data Computing
Big data and the Internet of Things (IoT) are hastily growing and shaking many elements of technology and industry, enhancing the assistance for both businesses and individual people. Throughout the last few years, as the miniaturisation of IoT devices has increased, massive volumes of data have been created. With the explosive growth of the IoT, Big Data technologies are known as an essential data analytics tool for delivering information into IoT foundations to serve the objective of the IoT approaches and help in key decision making. Despite the fact that big data analytics is a well-studied topic, the diversity of IoT realms has divided the progress of big data approaches in each IoT domain. Mutual understanding amongst IoT disciplines might therefore promote the extension of big data research in IoT. This study analyses state-of-the-art research efforts aimed on big data technologies in various IoT areas to promote and encourage knowledge transfer across IoT domains. Furthermore, discussion of many unique prospects in the IoT area is provided because of data analytics. Lastly, as future study directions, outstanding research problems are recognised and discussed.
- 30 November 2023
- Published by Taylor & Francis
- p. 1-16
IoT Next Gen and the World of Big Data Computing
Big data and the Internet of Things (IoT) are hastily growing and shaking many elements of technology and industry, enhancing the assistance for both businesses and individual people. Throughout the last few years, as the miniaturisation of IoT devices has increased, massive volumes of data have been created. With the explosive growth of the IoT, Big Data technologies are known as an essential data analytics tool for delivering information into IoT foundations to serve the objective of the IoT approaches and help in key decision making. Despite the fact that big data analytics is a well-studied topic, the diversity of IoT realms has divided the progress of big data approaches in each IoT domain. Mutual understanding amongst IoT disciplines might therefore promote the extension of big data research in IoT. This study analyses state-of-the-art research efforts aimed on big data technologies in various IoT areas to promote and encourage knowledge transfer across IoT domains. Furthermore, discussion of many unique prospects in the IoT area is provided because of data analytics. Lastly, as future study directions, outstanding research problems are recognised and discussed.
- 30 March 2023
- Published by Taylor & Francis in IETE Journal of Research
- Vol. 70 (2) , 1462-1471
Automated Breast Boundary Segmentation to Improve the Accuracy of Identifying Abnormalities in Breast Thermograms
Breast thermography is a non-invasive, painless, affordable, and safer method of detecting breast abnormalities. Thermal imaging techniques used for detecting breast anomalies rely on precise breast boundary segmentation. However, the segmentation accuracy of the breast boundary region is affected by unclear boundaries, a low signal-to-noise ratio, and poor contrast of the thermal images. To mitigate this, this paper proposes a novel Distance-based Metrics and High-Temperature Region-based Adaptive Thresholding (DM-HTRAT) method for breast boundary region segmentation and dissecting left and right breasts precisely. In the first section, the Upper Region Boundary (URB) and the intersection point of the breast are segmented using the Distance-based Metrics (DM) method. In the second section, a High-Temperature Region-based Adaptive Thresholding (HTRAT) method is used to segment the Lower Region Boundary (LRB). The result of the segmentation is analysed both quantitatively and qualitatively, also it is compared with the state-of-the-art methods. The proposed method has a significantly better accuracy of 96.5% than the other methods. This segmented image is then fed into the abnormality detection system developed via the asymmetrical analysis of segmented breast boundary regions. The proposed DM-HTRAT-based breast boundary segmentation is robust in segmenting all types of breast thermal images and aids in the more reliable and effective detection of breast abnormalities.
- 30 March 2023
- Published by Taylor & Francis in IETE Journal of Research
- Vol. 70 (2) , 1462-1471
Automated Breast Boundary Segmentation to Improve the Accuracy of Identifying Abnormalities in Breast Thermograms
Breast thermography is a non-invasive, painless, affordable, and safer method of detecting breast abnormalities. Thermal imaging techniques used for detecting breast anomalies rely on precise breast boundary segmentation. However, the segmentation accuracy of the breast boundary region is affected by unclear boundaries, a low signal-to-noise ratio, and poor contrast of the thermal images. To mitigate this, this paper proposes a novel Distance-based Metrics and High-Temperature Region-based Adaptive Thresholding (DM-HTRAT) method for breast boundary region segmentation and dissecting left and right breasts precisely. In the first section, the Upper Region Boundary (URB) and the intersection point of the breast are segmented using the Distance-based Metrics (DM) method. In the second section, a High-Temperature Region-based Adaptive Thresholding (HTRAT) method is used to segment the Lower Region Boundary (LRB). The result of the segmentation is analysed both quantitatively and qualitatively, also it is compared with the state-of-the-art methods. The proposed method has a significantly better accuracy of 96.5% than the other methods. This segmented image is then fed into the abnormality detection system developed via the asymmetrical analysis of segmented breast boundary regions. The proposed DM-HTRAT-based breast boundary segmentation is robust in segmenting all types of breast thermal images and aids in the more reliable and effective detection of breast abnormalities.
- Open Access
- 30 January 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Access
- Vol. PP, 1
Solar-Powered LVDC Nano-Grid with Smart FPGA-based Residential Power Switching Algorithm
A Low Voltage Direct Current (LVDC) nano-grid opens new potentials for the electrification of isolated rural settlements, urban residential structures, and the existing grid infrastructure. This study introduces and examines the Power-Sharing Control (PSC) of a solar Photovoltaic (PV) system connected to a low-voltage DC nano-grid. Effective control and power management between the components of a planned LVDC nano-grid system are presented, as is the use of a PSC algorithm implemented on a Field Programmable Gate Array (FPGA). General simulation investigations are tested to analyse the system’s performance using the recommended controller. The proposed LVDC nano-grid idea is developed, and its hardware is assessed. The results of the hardware under different settings are shown and discussed. The proposed nano-grid model is implemented in matrix laboratory (MATLAB)-Simulink and has an FPGA-based Maximum Power Point Tracking (MPPT) controller and a central PSC algorithm; simulation studies are performed, and results are achieved. 100 W nano-grid hardware is set up and tested. Quantitative cost-benefit analyses of the LVDC nano-grid of the proposed controller are given.
- 30 January 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Access
- Vol. PP, 1
Open AccessSolar-Powered LVDC Nano-Grid with Smart FPGA-based Residential Power Switching Algorithm
A Low Voltage Direct Current (LVDC) nano-grid opens new potentials for the electrification of isolated rural settlements, urban residential structures, and the existing grid infrastructure. This study introduces and examines the Power-Sharing Control (PSC) of a solar Photovoltaic (PV) system connected to a low-voltage DC nano-grid. Effective control and power management between the components of a planned LVDC nano-grid system are presented, as is the use of a PSC algorithm implemented on a Field Programmable Gate Array (FPGA). General simulation investigations are tested to analyse the system’s performance using the recommended controller. The proposed LVDC nano-grid idea is developed, and its hardware is assessed. The results of the hardware under different settings are shown and discussed. The proposed nano-grid model is implemented in matrix laboratory (MATLAB)-Simulink and has an FPGA-based Maximum Power Point Tracking (MPPT) controller and a central PSC algorithm; simulation studies are performed, and results are achieved. 100 W nano-grid hardware is set up and tested. Quantitative cost-benefit analyses of the LVDC nano-grid of the proposed controller are given.
- 29 July 2022
- Published by Springer Nature
- p. 639-653
Mask R-CNN based Object Detection in Overhead Transmission Line from UAV Images
- 29 July 2022
- Published by Springer Nature
- p. 639-653
Mask R-CNN based Object Detection in Overhead Transmission Line from UAV Images
- Open Access
- 21 April 2021
- Published by Hindawi Limited in Journal of Oncology
- Vol. 2021, 1-17
Enhanced Segmentation of Inflamed ROI to Improve the Accuracy of Identifying Benign and Malignant Cases in Breast Thermogram
Effective analysis of breast thermography needs an accurate segmentation of the inflamed region in Infrared Breast Thermal Images (IBTI) which helps in the diagnosis of breast cancer. However, IBTI suffers from intensity inhomogeneity, overlapping regions of interest, poor contrast, and low signal-to-noise ratio (SNR) due to the imperfect image acquisition process. To mitigate this, this work proposes an enhanced segmentation of the inflamed Region of Interest (ROI) using an active contour method driven by the multiscale local and global fitted image (MLGFI) model. The first phase proposes a bilateral histogram difference-based thresholding (BHDT) method for locating the inflamed ROI. This is then used for automatic initialization of active contours driven by MLGFI to segment the inflamed ROI from IBTI effectively. To prove the effectiveness of this segmentation method, its performance is compared with ground truth image and its accuracy is also evaluated with the state-of-the-art methods (Fuzzy C Means (FCM), Chan-Vese (CV-ACM), and K-means). From the analysis, it is found that the proposed method not only increases the precision and the segmentation accuracy but also reduces the oversegmentation and undersegmentation rate significantly. In the second phase, area-based feature (AF) and average intensity-based feature (AIF) along with the GLCM (gray level cooccurrence matrix) based second-order statistical features are extracted from the inflamed ROI. Based on these features, a system is developed to effectively classify the benign and malignant breast conditions. From the results, it is observed that the proposed model exhibits an improved accuracy of 91.5, sensitivity of 91, and specificity of 92 compared to the whole breast thermogram. Hence, it is concluded that the proposed method will improve the efficacy of thermal imaging in the diagnosis of breast cancer.
- 21 April 2021
- Published by Hindawi Limited in Journal of Oncology
- Vol. 2021, 1-17
Open AccessEnhanced Segmentation of Inflamed ROI to Improve the Accuracy of Identifying Benign and Malignant Cases in Breast Thermogram
Effective analysis of breast thermography needs an accurate segmentation of the inflamed region in Infrared Breast Thermal Images (IBTI) which helps in the diagnosis of breast cancer. However, IBTI suffers from intensity inhomogeneity, overlapping regions of interest, poor contrast, and low signal-to-noise ratio (SNR) due to the imperfect image acquisition process. To mitigate this, this work proposes an enhanced segmentation of the inflamed Region of Interest (ROI) using an active contour method driven by the multiscale local and global fitted image (MLGFI) model. The first phase proposes a bilateral histogram difference-based thresholding (BHDT) method for locating the inflamed ROI. This is then used for automatic initialization of active contours driven by MLGFI to segment the inflamed ROI from IBTI effectively. To prove the effectiveness of this segmentation method, its performance is compared with ground truth image and its accuracy is also evaluated with the state-of-the-art methods (Fuzzy C Means (FCM), Chan-Vese (CV-ACM), and K-means). From the analysis, it is found that the proposed method not only increases the precision and the segmentation accuracy but also reduces the oversegmentation and undersegmentation rate significantly. In the second phase, area-based feature (AF) and average intensity-based feature (AIF) along with the GLCM (gray level cooccurrence matrix) based second-order statistical features are extracted from the inflamed ROI. Based on these features, a system is developed to effectively classify the benign and malignant breast conditions. From the results, it is observed that the proposed model exhibits an improved accuracy of 91.5, sensitivity of 91, and specificity of 92 compared to the whole breast thermogram. Hence, it is concluded that the proposed method will improve the efficacy of thermal imaging in the diagnosis of breast cancer.
- Open Access
- 4 October 2017
- Published by Institution of Engineering and Technology (IET) in IET Image Processing
- Vol. 11 (11) , 1015-1019
Quantitative growth analysis of pulp necrotic tooth (post‐op) using modified region growing active contour model
In the field of dentistry, prospective clinical study reports affirm the need for approximate growth analysis of endodontic tooth post treatment. There is no difference in the frequency, appearance or extent of root resorption in the teeth. It is necessary to elucidate the role of endodontic treatment in the root resorption. Differences between the two samples (radiographs), which are taken with specified period of intervals, in terms of the frequency of growth changes in treated teeth is needed to observe accurately. This study mainly aims at this requirement by utilising slightly modified region‐based growing active contour model for quantitative growth analysis of tooth. Recall radiographs of endodontic regeneration involving immature permanent teeth with pulp necrosis have been considered as input in this research. Image enhancing techniques such as dilation and erosion of mathematical morphology are then performed sequentially to emphasise the outlying pixels. Finally, the criterions which include the root length, apical diameter and the dentinal wall thickness are calibrated and given in experimental results. The visual sample results and along with its measurements proved the efficiency of the proposed algorithm.
- 4 October 2017
- Published by Institution of Engineering and Technology (IET) in IET Image Processing
- Vol. 11 (11) , 1015-1019
Open AccessQuantitative growth analysis of pulp necrotic tooth (post‐op) using modified region growing active contour model
In the field of dentistry, prospective clinical study reports affirm the need for approximate growth analysis of endodontic tooth post treatment. There is no difference in the frequency, appearance or extent of root resorption in the teeth. It is necessary to elucidate the role of endodontic treatment in the root resorption. Differences between the two samples (radiographs), which are taken with specified period of intervals, in terms of the frequency of growth changes in treated teeth is needed to observe accurately. This study mainly aims at this requirement by utilising slightly modified region‐based growing active contour model for quantitative growth analysis of tooth. Recall radiographs of endodontic regeneration involving immature permanent teeth with pulp necrosis have been considered as input in this research. Image enhancing techniques such as dilation and erosion of mathematical morphology are then performed sequentially to emphasise the outlying pixels. Finally, the criterions which include the root length, apical diameter and the dentinal wall thickness are calibrated and given in experimental results. The visual sample results and along with its measurements proved the efficiency of the proposed algorithm.
- 1 April 2017
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 112-115
Disease detection in crops using remote sensing images
This paper describes an automated diseases detection using remote sensing images. Agriculturists are facing loss due to various crop diseases. It becomes tedious to the cultivators to monitor the crops regularly when the cultivated area is huge (in acres). The most significant part of our research is early detection the disease as soon as it starts spreading on the top layer of the leaves using remote sensing images. This approach has two phases: first phase deals with training of healthy and as well as diseased datasets i.e.) the extraction of threshold values from the image, second phase deals with monitoring of crops and identification of particular disease using canny edge detection algorithm and histogram analysis and also intimate the agriculturists with an early alert message immediately.
- 1 April 2017
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 112-115
Disease detection in crops using remote sensing images
This paper describes an automated diseases detection using remote sensing images. Agriculturists are facing loss due to various crop diseases. It becomes tedious to the cultivators to monitor the crops regularly when the cultivated area is huge (in acres). The most significant part of our research is early detection the disease as soon as it starts spreading on the top layer of the leaves using remote sensing images. This approach has two phases: first phase deals with training of healthy and as well as diseased datasets i.e.) the extraction of threshold values from the image, second phase deals with monitoring of crops and identification of particular disease using canny edge detection algorithm and histogram analysis and also intimate the agriculturists with an early alert message immediately.