Arshad Hussain
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Previous Organizations / Institutes
The organizations / institutes from the scholar's other articles in the past ten years
Research Subjects
Arshad Hussain has a total of 142 co-authors. Here are the top co-authors by number of shared publications:
- Sarah Farrukh
School of Chemical and Materials Engineering (SCME), National University of Sciences and Technology (NUST), Sector H-12, Islamabad 44000, Pakistan
24 shared publications - Muhammad Bilal Khan Niazi
Department of Chemical Engineering King Fahd University of Petroleum and Minerals (KFUPM) Dhahran Saudi Arabia
15 shared publications Zaib Jahan
11 shared publications- Muhammad Ahsan
School of Chemical and Materials Engineering (SCME), National University of Sciences and Technology (NUST), Sector H-12, Islamabad 44000, Pakistan
7 shared publications Erum Pervaiz
5 shared publications- Evangelos Tsotsas
Thermal Process Engineering, Otto von Guericke University Magdeburg, 39106 Magdeburg, Germany
4 shared publications
Latest Publications
- 5 November 2025
- Published by Royal Society of Chemistry (RSC) in Journal of Materials Chemistry B
- Vol. 13 (43) , 13954-13971
Scalable synthesis of asymmetric hemodialysis membranes to enhance performance and biocompatibility in flat sheet and hollow fiber configurations
Hemodialysis is indispensable for patients with end-stage renal disease (ESRD).
- 5 November 2025
- Published by Royal Society of Chemistry (RSC) in Journal of Materials Chemistry B
- Vol. 13 (43) , 13954-13971
Scalable synthesis of asymmetric hemodialysis membranes to enhance performance and biocompatibility in flat sheet and hollow fiber configurations
Hemodialysis is indispensable for patients with end-stage renal disease (ESRD).
- Open Access
- 28 September 2021
- Published by Pakistan Academy of Sciences in Proceedings of the Pakistan Academy of Sciences: A. Physical and Computational Sciences
- Vol. 58 (3) , 15-29
Analytic Preview of Spectral Contribution of the Neutrinos Emission from Deep Space during Specified Period
The earlier period investigations of Neutrinos emission from deep space indicate the existence of this particle which has been detected in various laboratories of the world. These laboratories are responsible for recording neutrinos emission originated from deep space. One laboratory situated near Sudbury, Ontario, Canada known as Sudbury Neutrino Observatory (SNO). Another laboratory is in Japan known as Kamikanado. We obtained a set of observations from both labs. It is obvious that the observations recorded at SNO have been utilized in this manuscript. From the same communication, the neutrino behaviour could be better understood by analyzing the SNO observed data set-I from November 1999 to May 2001 of D2O, while dataset-II is from July 2001 to August 2003 of salt water with particulars recorded, Run start Time since midnight. The samples used in this paper are 250 entries from both the observations sets. In this presentation, the most spectacular exhibition of the neutrino flux in its frequency components of the particles have been depicted in the form of a Periodogram that identifies covariance structure in the neutrino flux reaching this biosphere and parametric values obtained in this paper have been tabulated in various table frame of work. This communication does claim the neutrino emission characteristics in the real world. It has also been known from the literature survey that the same kind of work has not been framed in the third world countries where no neutrino detection laboratories exist. This piece of information will be beneficial for the private and public organizations where the experts are trying to explore deep space emissions detection and their characterization like the present study.
- 28 September 2021
- Published by Pakistan Academy of Sciences in Proceedings of the Pakistan Academy of Sciences: A. Physical and Computational Sciences
- Vol. 58 (3) , 15-29
Open AccessAnalytic Preview of Spectral Contribution of the Neutrinos Emission from Deep Space during Specified Period
The earlier period investigations of Neutrinos emission from deep space indicate the existence of this particle which has been detected in various laboratories of the world. These laboratories are responsible for recording neutrinos emission originated from deep space. One laboratory situated near Sudbury, Ontario, Canada known as Sudbury Neutrino Observatory (SNO). Another laboratory is in Japan known as Kamikanado. We obtained a set of observations from both labs. It is obvious that the observations recorded at SNO have been utilized in this manuscript. From the same communication, the neutrino behaviour could be better understood by analyzing the SNO observed data set-I from November 1999 to May 2001 of D2O, while dataset-II is from July 2001 to August 2003 of salt water with particulars recorded, Run start Time since midnight. The samples used in this paper are 250 entries from both the observations sets. In this presentation, the most spectacular exhibition of the neutrino flux in its frequency components of the particles have been depicted in the form of a Periodogram that identifies covariance structure in the neutrino flux reaching this biosphere and parametric values obtained in this paper have been tabulated in various table frame of work. This communication does claim the neutrino emission characteristics in the real world. It has also been known from the literature survey that the same kind of work has not been framed in the third world countries where no neutrino detection laboratories exist. This piece of information will be beneficial for the private and public organizations where the experts are trying to explore deep space emissions detection and their characterization like the present study.
- Open Access
Performance Analysis of Blended Membranes of Cellulose Acetate with Variable Degree of Acetylation for CO2/CH4 Separation
The separation and capture of CO2 have become an urgent and important agenda because of the CO2-induced global warming and the requirement of industrial products. Membrane-based technologies have proven to be a promising alternative for CO2 separations. To make the gas-separation membrane process more competitive, productive membrane with high gas permeability and high selectivity is crucial. Herein, we developed new cellulose triacetate (CTA) and cellulose diacetate (CDA) blended membranes for CO2 separations. The CTA and CDA blends were chosen because they have similar chemical structures, good separation performance, and its economical and green nature. The best position in Robeson’s upper bound curve at 5 bar was obtained with the membrane containing 80 wt.% CTA and 20 wt.% CDA, which shows the CO2 permeability of 17.32 barrer and CO2/CH4 selectivity of 18.55. The membrane exhibits 98% enhancement in CO2/CH4 selectivity compared to neat membrane with only a slight reduction in CO2 permeability. The optimal membrane displays a plasticization pressure of 10.48 bar. The newly developed blended membranes show great potential for CO2 separations in the natural gas industry.
Open AccessPerformance Analysis of Blended Membranes of Cellulose Acetate with Variable Degree of Acetylation for CO2/CH4 Separation
The separation and capture of CO2 have become an urgent and important agenda because of the CO2-induced global warming and the requirement of industrial products. Membrane-based technologies have proven to be a promising alternative for CO2 separations. To make the gas-separation membrane process more competitive, productive membrane with high gas permeability and high selectivity is crucial. Herein, we developed new cellulose triacetate (CTA) and cellulose diacetate (CDA) blended membranes for CO2 separations. The CTA and CDA blends were chosen because they have similar chemical structures, good separation performance, and its economical and green nature. The best position in Robeson’s upper bound curve at 5 bar was obtained with the membrane containing 80 wt.% CTA and 20 wt.% CDA, which shows the CO2 permeability of 17.32 barrer and CO2/CH4 selectivity of 18.55. The membrane exhibits 98% enhancement in CO2/CH4 selectivity compared to neat membrane with only a slight reduction in CO2 permeability. The optimal membrane displays a plasticization pressure of 10.48 bar. The newly developed blended membranes show great potential for CO2 separations in the natural gas industry.
- Open Access
Computational Fluid Dynamics (CFD) Modeling and Simulation of Flow Regulatory Mechanism in Artificial Kidney Using Finite Element Method
There is an enormous need in the health welfare sector to manufacture inexpensive dialyzer membranes with minimum dialysis duration. In order to optimize the dialysis cost and time, an in-depth analysis of the effect of dialyzer design and process parameters on toxins (ranging from tiny to large size molecules) clearance rate is required. Mathematical analysis and enhanced computational power of computers can translate the transport phenomena occurring inside the dialyzer while minimizing the development cost. In this paper, the steady-state mass transport in blood and dialysate compartment and across the membrane is investigated with convection-diffusion equations and tortuous pore diffusion model (TPDM), respectively. The two-dimensional, axisymmetric CFD model was simulated by using a solver based on the finite element method (COMSOL Multiphysics 5.4). The effect of design and process parameters is analyzed by solving model equations for varying values of design and process parameters. It is found that by introducing tortuosity in the pore diffusion model, the clearance rate of small size molecules increases, but the clearance rate of large size molecules is reduced. When the fiber aspect ratio (db/L) varies from 900 to 2300, the clearance rate increases 37.71% of its initial value. The results also show that when the pore diameter increases from 10 nm to 20 nm, the clearance rate of urea and glucose also increases by 2.09% and 7.93%, respectively, with tolerated transport of albumin molecules.
Open AccessComputational Fluid Dynamics (CFD) Modeling and Simulation of Flow Regulatory Mechanism in Artificial Kidney Using Finite Element Method
There is an enormous need in the health welfare sector to manufacture inexpensive dialyzer membranes with minimum dialysis duration. In order to optimize the dialysis cost and time, an in-depth analysis of the effect of dialyzer design and process parameters on toxins (ranging from tiny to large size molecules) clearance rate is required. Mathematical analysis and enhanced computational power of computers can translate the transport phenomena occurring inside the dialyzer while minimizing the development cost. In this paper, the steady-state mass transport in blood and dialysate compartment and across the membrane is investigated with convection-diffusion equations and tortuous pore diffusion model (TPDM), respectively. The two-dimensional, axisymmetric CFD model was simulated by using a solver based on the finite element method (COMSOL Multiphysics 5.4). The effect of design and process parameters is analyzed by solving model equations for varying values of design and process parameters. It is found that by introducing tortuosity in the pore diffusion model, the clearance rate of small size molecules increases, but the clearance rate of large size molecules is reduced. When the fiber aspect ratio (db/L) varies from 900 to 2300, the clearance rate increases 37.71% of its initial value. The results also show that when the pore diameter increases from 10 nm to 20 nm, the clearance rate of urea and glucose also increases by 2.09% and 7.93%, respectively, with tolerated transport of albumin molecules.
- 13 May 2020
- Published by Springer Nature in Chemical Papers
- Vol. 74 (10) , 3527-3543
Optimization analysis of polyurethane based mixed matrix gas separation membranes by incorporation of gamma-cyclodextrin metal organic frame work
- 13 May 2020
- Published by Springer Nature in Chemical Papers
- Vol. 74 (10) , 3527-3543
Optimization analysis of polyurethane based mixed matrix gas separation membranes by incorporation of gamma-cyclodextrin metal organic frame work
- 1 May 2020
- Published by Elsevier in European Polymer Journal
- Vol. 130
In-vitro and in-vivo study of superabsorbent PVA/Starch/g-C3N4/Ag@TiO2 NPs hydrogel membranes for wound dressing
- 1 May 2020
- Published by Elsevier in European Polymer Journal
- Vol. 130
In-vitro and in-vivo study of superabsorbent PVA/Starch/g-C3N4/Ag@TiO2 NPs hydrogel membranes for wound dressing
- 18 April 2020
- Published by Springer Nature in Environmental Science and Pollution Research
- Vol. 27 (19) , 24413-24429
Enhancement in the selectivity of O2/N2 via ZIF-8/CA mixed-matrix membranes and the development of a thermodynamic model to predict the permeability of gases
Zeolitic imidazolate framework-8 (ZIF-8) has a sodalite topology. ZIF-8 is composed of zinc ion coordinated by four imidazolate rings. The pore aperture of ZIF-8 is 3.4 Å, which readily retains large gas molecules like N2. In this work, mixed-matrix membranes (MMMs) have been fabricated by utilizing ZIF-8 and pristine cellulose acetate (CA) for O2/N2 separation. Membranes of pristine CA and MMMs of ZIF-8/CA at various ZIF-8 concentrations were prepared in tetrahydrofuran (THF). Permeation results of the fabricated membranes revealed increasing selectivity for O2/N2 with increasing pressure as well as ZIF-8/CA concentration up to 5% (w/w). The selectivity of O2/N2 increased 4 times for MMMs containing 5% (w/w) of ZIF-8/CA as compared with the pristine CA membrane. A thermodynamic model has also been developed to predict the permeability of gases through polymeric membranes. The results were compared with literature data as well as the pristine CA membrane produced in this work for model validation.
- 18 April 2020
- Published by Springer Nature in Environmental Science and Pollution Research
- Vol. 27 (19) , 24413-24429
Enhancement in the selectivity of O2/N2 via ZIF-8/CA mixed-matrix membranes and the development of a thermodynamic model to predict the permeability of gases
Zeolitic imidazolate framework-8 (ZIF-8) has a sodalite topology. ZIF-8 is composed of zinc ion coordinated by four imidazolate rings. The pore aperture of ZIF-8 is 3.4 Å, which readily retains large gas molecules like N2. In this work, mixed-matrix membranes (MMMs) have been fabricated by utilizing ZIF-8 and pristine cellulose acetate (CA) for O2/N2 separation. Membranes of pristine CA and MMMs of ZIF-8/CA at various ZIF-8 concentrations were prepared in tetrahydrofuran (THF). Permeation results of the fabricated membranes revealed increasing selectivity for O2/N2 with increasing pressure as well as ZIF-8/CA concentration up to 5% (w/w). The selectivity of O2/N2 increased 4 times for MMMs containing 5% (w/w) of ZIF-8/CA as compared with the pristine CA membrane. A thermodynamic model has also been developed to predict the permeability of gases through polymeric membranes. The results were compared with literature data as well as the pristine CA membrane produced in this work for model validation.
- 31 March 2020
- Published by Taylor & Francis in Journal of Plant Nutrition
- Vol. 43 (10) , 1510-1533
Coating materials for slow release of nitrogen from urea fertilizer: a review
Presently, about 200 million tons of urea fertilizer is produced worldwide to meet supply and demand. However, a quarter of the urea applied to soils is lost to the environment due to poor efficiency. Poor efficiency can be prevented by slowing the release of urea - nitrogen. One mechanism to do this is ‘Encapsulation’. Encapsulation allows for higher urea efficiency, synchronization with plants ongoing nutrient needs. This review covers an extensive study on ordinary urea usage including the different materials used for coating, which can be natural or artificial, and the different coating processes. Also included are the methods of employing different substances with the pros and cons of each.
- 31 March 2020
- Published by Taylor & Francis in Journal of Plant Nutrition
- Vol. 43 (10) , 1510-1533
Coating materials for slow release of nitrogen from urea fertilizer: a review
Presently, about 200 million tons of urea fertilizer is produced worldwide to meet supply and demand. However, a quarter of the urea applied to soils is lost to the environment due to poor efficiency. Poor efficiency can be prevented by slowing the release of urea - nitrogen. One mechanism to do this is ‘Encapsulation’. Encapsulation allows for higher urea efficiency, synchronization with plants ongoing nutrient needs. This review covers an extensive study on ordinary urea usage including the different materials used for coating, which can be natural or artificial, and the different coating processes. Also included are the methods of employing different substances with the pros and cons of each.
- 11 November 2019
- Published by Springer Nature in Environmental Science and Pollution Research
- Vol. 26 (36) , 36214-36225
Adsorption of CO2 on amine-functionalized green metal-organic framework: an interaction between amine and CO2 molecules
The efficient capture of CO2 is a critical problem for porous adsorbents. The inadequacy of conventional adsorbents has low adsorption capacity towards CO2 removal. Metal organic frame work has been considered as very effective for CO2 adsorption as it shows higher rate of CO2 adsorption at room temperature. In conventional amine processes, a comparatively high energy penalty is required, whereas a novel class of metal-organic framework by the combination of amine solvent have improve the potential of adsorption process and also the efficiency of separation. Amine-functionalized MOFs become more fascinated due to strong interaction between carbon dioxide and amine-functionalized MOF. A renewable green γCD-MOF was synthesized by using vapor diffusion method. Post-synthetic modification of γCD-MOF was done with piperazine and analyzed to expose its crystalline structure, morphology, and porous structure. The main aim of this paper is to enhance the CO2 adsorption by functionalization of inexpensive, green, nanoporous γCD-MOF and also to highlight the effects of amine-based functionalization towards potential application. Gravimetric CO2 adsorption isotherms for γCD-MOF, pip-γCD-MOF are reported up to 60 °C and found to follow a pseudo-second-order reaction. The pip-γCD-MOF confirms comparatively increased rapid adsorption rate of CO2 than that of γCD-MOF and desorption of CO2, and need less energy for regeneration. These results are the complete evidence of piperazine as an efficient amine group for increasing the CO2 adsorption uptake capacity.
- 11 November 2019
- Published by Springer Nature in Environmental Science and Pollution Research
- Vol. 26 (36) , 36214-36225
Adsorption of CO2 on amine-functionalized green metal-organic framework: an interaction between amine and CO2 molecules
The efficient capture of CO2 is a critical problem for porous adsorbents. The inadequacy of conventional adsorbents has low adsorption capacity towards CO2 removal. Metal organic frame work has been considered as very effective for CO2 adsorption as it shows higher rate of CO2 adsorption at room temperature. In conventional amine processes, a comparatively high energy penalty is required, whereas a novel class of metal-organic framework by the combination of amine solvent have improve the potential of adsorption process and also the efficiency of separation. Amine-functionalized MOFs become more fascinated due to strong interaction between carbon dioxide and amine-functionalized MOF. A renewable green γCD-MOF was synthesized by using vapor diffusion method. Post-synthetic modification of γCD-MOF was done with piperazine and analyzed to expose its crystalline structure, morphology, and porous structure. The main aim of this paper is to enhance the CO2 adsorption by functionalization of inexpensive, green, nanoporous γCD-MOF and also to highlight the effects of amine-based functionalization towards potential application. Gravimetric CO2 adsorption isotherms for γCD-MOF, pip-γCD-MOF are reported up to 60 °C and found to follow a pseudo-second-order reaction. The pip-γCD-MOF confirms comparatively increased rapid adsorption rate of CO2 than that of γCD-MOF and desorption of CO2, and need less energy for regeneration. These results are the complete evidence of piperazine as an efficient amine group for increasing the CO2 adsorption uptake capacity.
- 28 October 2019
- Published by Wiley in Journal of Food Safety
- Vol. 40 (1)
PVA/starch/propolis/anthocyanins rosemary extract composite films as active and intelligent food packaging materials
Active and intelligent food packaging films has taken more importance over conventional packaging. The aim of this study was to develop active and intelligent food packaging films based on bio‐degradable polymers like polyvinyl alcohol and starch, incorporated with natural additives, that is, propolis extract (PE) and Anthocyanin. Boric acid was used as a cross‐linker. The results proved the compatibility of films mixture. The mechanical strength was also measured and highest value was achieved 6.1 MPa for films containing 20% PE. Moreover, the maximum zone of inhabitation, that is, 21 and 15 mm, was also achieved at same composition against Escherichia coli and methicillin‐resistant Staphylococcus aureus, respectively. Furthermore, all films had shown great color response against different pH ranging from 2 to 14. Finally, food spoilage test was performed using pasteurized milk. Films responded visibly by changing color and protected milk from spoilage. Hence, formulated bio‐degradable active and intelligent films can be used as food packaging material.
- 28 October 2019
- Published by Wiley in Journal of Food Safety
- Vol. 40 (1)
PVA/starch/propolis/anthocyanins rosemary extract composite films as active and intelligent food packaging materials
Active and intelligent food packaging films has taken more importance over conventional packaging. The aim of this study was to develop active and intelligent food packaging films based on bio‐degradable polymers like polyvinyl alcohol and starch, incorporated with natural additives, that is, propolis extract (PE) and Anthocyanin. Boric acid was used as a cross‐linker. The results proved the compatibility of films mixture. The mechanical strength was also measured and highest value was achieved 6.1 MPa for films containing 20% PE. Moreover, the maximum zone of inhabitation, that is, 21 and 15 mm, was also achieved at same composition against Escherichia coli and methicillin‐resistant Staphylococcus aureus, respectively. Furthermore, all films had shown great color response against different pH ranging from 2 to 14. Finally, food spoilage test was performed using pasteurized milk. Films responded visibly by changing color and protected milk from spoilage. Hence, formulated bio‐degradable active and intelligent films can be used as food packaging material.