Chris Everson
Chris Everson has a total of 47 co-authors. Here are the top co-authors by number of shared publications:
- A. C. Hossack
Department of Aeronautics and Astronautics, University of Washington 1 , Seattle, Washington 98195, USA
5 shared publications - Derek A. Sutherland
CTFusion, Inc. 2 , Seattle, Washington 98121, USA
4 shared publications - Bodhi Biswas
MIT, Plasma Sci & Fus Ctr, Cambridge, MA 02139 USA
2 shared publications - Cary B. Forest
University of Wisconsin-Madison 2 , Madison, Wisconsin 53706
2 shared publications - Dmitry Vadimovich Yakovlev
Budker Institute of Nuclear Physics SB RAS 630090 Novosibirsk Russia
2 shared publications - Douglass Endrizzi
University of Wisconsin–Madison
2 shared publications
Latest Publications
- 1 July 2026
- Published by AIP Publishing in Review of Scientific Instruments
- Vol. 97 (7)
First implementation of absolute extreme ultraviolet (AXUV) diode-array-based analysis and macro-instability diagnostics on Wisconsin high-temperature superconducting axisymmetric mirror (WHAM).
Absolute extreme ultraviolet (AXUV) diode arrays are widely used in fusion experiments for time-resolved measurements of plasma radiation. We report the first implementation of an AXUV-based analysis framework on the Wisconsin high-temperature superconducting axisymmetric mirror. A single, precisely calibrated 20-channel AXUV assembly measures line-integrated plasma emission with ∼1cm of spatial accuracy across the mid-plane. The data were processed to obtain the plasma's statistical moments, yielding time-resolved measurements of the centroid displacement Φ(t) and effective radius R(t). From the joint covariance of these quantities, we define a macroscopic instability parameter χ(t) that quantifies large-scale plasma evolution directly from AXUV observables. The parameter χ serves as a compact indicator of macroscopic plasma activity, decreasing with increasing end-plate bias and exhibiting strong anti-correlation with diamagnetic flux during confinement transitions. These results demonstrate that a single AXUV array can provide real-time assessment of macroscopic plasma dynamics, constituting the first demonstration of such capability in a magnetic mirror plasma. Future extensions to multiple arrays will further enhance spatial coverage and enable full-mode tracking in axisymmetric mirror configurations and related fusion devices.
- 1 July 2026
- Published by AIP Publishing in Review of Scientific Instruments
- Vol. 97 (7)
First implementation of absolute extreme ultraviolet (AXUV) diode-array-based analysis and macro-instability diagnostics on Wisconsin high-temperature superconducting axisymmetric mirror (WHAM).
Absolute extreme ultraviolet (AXUV) diode arrays are widely used in fusion experiments for time-resolved measurements of plasma radiation. We report the first implementation of an AXUV-based analysis framework on the Wisconsin high-temperature superconducting axisymmetric mirror. A single, precisely calibrated 20-channel AXUV assembly measures line-integrated plasma emission with ∼1cm of spatial accuracy across the mid-plane. The data were processed to obtain the plasma's statistical moments, yielding time-resolved measurements of the centroid displacement Φ(t) and effective radius R(t). From the joint covariance of these quantities, we define a macroscopic instability parameter χ(t) that quantifies large-scale plasma evolution directly from AXUV observables. The parameter χ serves as a compact indicator of macroscopic plasma activity, decreasing with increasing end-plate bias and exhibiting strong anti-correlation with diamagnetic flux during confinement transitions. These results demonstrate that a single AXUV array can provide real-time assessment of macroscopic plasma dynamics, constituting the first demonstration of such capability in a magnetic mirror plasma. Future extensions to multiple arrays will further enhance spatial coverage and enable full-mode tracking in axisymmetric mirror configurations and related fusion devices.
- Open Access
- 1 March 2026
- Published by AIP Publishing in Physics of Plasmas
- Vol. 33 (3)
Nonlinear anisotropic equilibrium reconstruction in axisymmetric magnetic mirrors
Magnetic equilibrium reconstruction is a crucial simulation capability for interpreting diagnostic measurements of experimental plasmas. Equilibrium reconstruction has mostly been applied to systems with isotropic pressure and relatively low plasma β=2μ0p/B2. This work extends nonlinear equilibrium reconstruction to high-β plasmas with anisotropic pressure and applies it to the Wisconsin high-temperature superconducting axisymmetric magnetic mirror (WHAM) experiments to infer the presence of sloshing ions. A novel basis set for the plasma profiles and machine-learning algorithm using scalable constrained Bayesian optimization allows accurate nonlinear reconstructions with uncertainty quantification to be made more quickly with fewer experimental diagnostics and improves the robustness of reconstructions at high β. In addition to WHAM and other mirrors, such reconstruction techniques are potentially attractive in high-performance devices with constrained diagnostic capabilities such as fusion power plants.
- 1 March 2026
- Published by AIP Publishing in Physics of Plasmas
- Vol. 33 (3)
Open AccessNonlinear anisotropic equilibrium reconstruction in axisymmetric magnetic mirrors
Magnetic equilibrium reconstruction is a crucial simulation capability for interpreting diagnostic measurements of experimental plasmas. Equilibrium reconstruction has mostly been applied to systems with isotropic pressure and relatively low plasma β=2μ0p/B2. This work extends nonlinear equilibrium reconstruction to high-β plasmas with anisotropic pressure and applies it to the Wisconsin high-temperature superconducting axisymmetric magnetic mirror (WHAM) experiments to infer the presence of sloshing ions. A novel basis set for the plasma profiles and machine-learning algorithm using scalable constrained Bayesian optimization allows accurate nonlinear reconstructions with uncertainty quantification to be made more quickly with fewer experimental diagnostics and improves the robustness of reconstructions at high β. In addition to WHAM and other mirrors, such reconstruction techniques are potentially attractive in high-performance devices with constrained diagnostic capabilities such as fusion power plants.
- Open Access
- 1 September 2019
- Published by AIP Publishing in Physics of Plasmas
- Vol. 26 (9) , 092902
The nature and source of solar magnetic phenomena
The heliosphere appears to be powered by coaxial helicity injection from a negative helicity injector in the northern hemisphere and a positive one in the southern hemisphere. The injector magnetic flux for both is the measured solar polar magnetic flux, and the injector voltage is generated by a simple dynamo effect due to the differential rotation of the solar surface with the polar magnetic flux. The dynamo current is estimated from the solar motion that it causes. This current also appears to sustain a thin, shallow global magnetic structure over most of the solar surface that has the form of a 1D minimum energy state. The current channel appears to be destroyed and reformed every 11 years. The currents and magnetic fields reverse in this solar cycle. A brief discussion of surface phenomena observed during this cycle is given. Plasma self-organization is briefly discussed and used in this analysis of solar data. The magnetic phenomena discussed include torsional oscillations, the heat source for the chromosphere and the corona, filaments, meridional flow, the solar cycle, sunspots, CMEs, and flares.
- 1 September 2019
- Published by AIP Publishing in Physics of Plasmas
- Vol. 26 (9) , 092902
Open AccessThe nature and source of solar magnetic phenomena
The heliosphere appears to be powered by coaxial helicity injection from a negative helicity injector in the northern hemisphere and a positive one in the southern hemisphere. The injector magnetic flux for both is the measured solar polar magnetic flux, and the injector voltage is generated by a simple dynamo effect due to the differential rotation of the solar surface with the polar magnetic flux. The dynamo current is estimated from the solar motion that it causes. This current also appears to sustain a thin, shallow global magnetic structure over most of the solar surface that has the form of a 1D minimum energy state. The current channel appears to be destroyed and reformed every 11 years. The currents and magnetic fields reverse in this solar cycle. A brief discussion of surface phenomena observed during this cycle is given. Plasma self-organization is briefly discussed and used in this analysis of solar data. The magnetic phenomena discussed include torsional oscillations, the heat source for the chromosphere and the corona, filaments, meridional flow, the solar cycle, sunspots, CMEs, and flares.
- 1 March 2018
- Published by AIP Publishing in Review of Scientific Instruments
- Vol. 89 (3) , 035107
Improvements to the ion Doppler spectrometer diagnostic on the HIT-SI experiments
An ion Doppler spectrometer diagnostic system measuring impurity ion temperature and velocity on the HIT-SI and HIT-SI3 spheromak devices has been improved with higher spatiotemporal resolution and lower error than previously described devices. Hardware and software improvements to the established technique have resulted in a record of 6.9 μs temporal and ≤2.8 cm spatial resolution in the midplane of each device. These allow Ciii and Oii flow, displacement, and temperature profiles to be observed simultaneously. With 72 fused-silica fiber channels in two independent bundles, and an f/8.5 Czerny-Turner spectrometer coupled to a video camera, frame rates of up to ten times the imposed magnetic perturbation frequency of 14.5 kHz were achieved in HIT-SI, viewing the upper half of the midplane. In HIT-SI3, frame rates of up to eight times the perturbation frequency were achieved viewing both halves of the midplane. Biorthogonal decomposition is used as a novel filtering tool, reducing uncertainty in ion temperature from ≲13 to ≲5 eV (with an instrument temperature of 8-16 eV) and uncertainty in velocity from ≲2 to ≲1 km/s. Doppler shift and broadening are calculated via the Levenberg-Marquardt algorithm, after which the errors in velocity and temperature are uniquely specified. Axisymmetric temperature profiles on HIT-SI3 for Ciii peaked near the inboard current separatrix at ≈40 eV are observed. Axisymmetric plasma displacement profiles have been measured on HIT-SI3, peaking at ≈6 cm at the outboard separatrix. Both profiles agree with the upper half of the midplane observable by HIT-SI. With its complete midplane view, HIT-SI3 has unambiguously extracted axisymmetric, toroidal current dependent rotation of up to 3 km/s. Analysis of the temporal phase of the displacement uncovers a coherent structure, locked to the applied perturbation. Previously described diagnostic systems could not achieve such results.
- 1 March 2018
- Published by AIP Publishing in Review of Scientific Instruments
- Vol. 89 (3) , 035107
Improvements to the ion Doppler spectrometer diagnostic on the HIT-SI experiments
An ion Doppler spectrometer diagnostic system measuring impurity ion temperature and velocity on the HIT-SI and HIT-SI3 spheromak devices has been improved with higher spatiotemporal resolution and lower error than previously described devices. Hardware and software improvements to the established technique have resulted in a record of 6.9 μs temporal and ≤2.8 cm spatial resolution in the midplane of each device. These allow Ciii and Oii flow, displacement, and temperature profiles to be observed simultaneously. With 72 fused-silica fiber channels in two independent bundles, and an f/8.5 Czerny-Turner spectrometer coupled to a video camera, frame rates of up to ten times the imposed magnetic perturbation frequency of 14.5 kHz were achieved in HIT-SI, viewing the upper half of the midplane. In HIT-SI3, frame rates of up to eight times the perturbation frequency were achieved viewing both halves of the midplane. Biorthogonal decomposition is used as a novel filtering tool, reducing uncertainty in ion temperature from ≲13 to ≲5 eV (with an instrument temperature of 8-16 eV) and uncertainty in velocity from ≲2 to ≲1 km/s. Doppler shift and broadening are calculated via the Levenberg-Marquardt algorithm, after which the errors in velocity and temperature are uniquely specified. Axisymmetric temperature profiles on HIT-SI3 for Ciii peaked near the inboard current separatrix at ≈40 eV are observed. Axisymmetric plasma displacement profiles have been measured on HIT-SI3, peaking at ≈6 cm at the outboard separatrix. Both profiles agree with the upper half of the midplane observable by HIT-SI. With its complete midplane view, HIT-SI3 has unambiguously extracted axisymmetric, toroidal current dependent rotation of up to 3 km/s. Analysis of the temporal phase of the displacement uncovers a coherent structure, locked to the applied perturbation. Previously described diagnostic systems could not achieve such results.
- 1 December 2017
- Published by AIP Publishing in Physics of Plasmas
- Vol. 24 (12)
Validation of extended magnetohydrodynamic simulations of the HIT-SI3 experiment using the NIMROD code
The HIT-SI3 experiment uses a set of inductively driven helicity injectors to apply a non-axisymmetric current drive on the edge of the plasma, driving an axisymmetric spheromak equilibrium in a central confinement volume. These helicity injectors drive a non-axisymmetric perturbation that oscillates in time, with relative temporal phasing of the injectors modifying the mode structure of the applied perturbation. A set of three experimental discharges with different perturbation spectra are modelled using the NIMROD extended magnetohydrodynamics code, and comparisons are made to both magnetic and fluid measurements. These models successfully capture the bulk dynamics of both the perturbation and the equilibrium, though disagreements related to the pressure gradients experimentally measured exist.
- 1 December 2017
- Published by AIP Publishing in Physics of Plasmas
- Vol. 24 (12)
Validation of extended magnetohydrodynamic simulations of the HIT-SI3 experiment using the NIMROD code
The HIT-SI3 experiment uses a set of inductively driven helicity injectors to apply a non-axisymmetric current drive on the edge of the plasma, driving an axisymmetric spheromak equilibrium in a central confinement volume. These helicity injectors drive a non-axisymmetric perturbation that oscillates in time, with relative temporal phasing of the injectors modifying the mode structure of the applied perturbation. A set of three experimental discharges with different perturbation spectra are modelled using the NIMROD extended magnetohydrodynamics code, and comparisons are made to both magnetic and fluid measurements. These models successfully capture the bulk dynamics of both the perturbation and the equilibrium, though disagreements related to the pressure gradients experimentally measured exist.
- 31 May 2017
- Published by IOP Publishing in Nuclear Fusion
- Vol. 57 (7) , 076026
Plasma response to sustainment with imposed-dynamo current drive in HIT-SI and HIT-SI3
The helicity injected torus—steady inductive (HIT-SI) program studies efficient, steady-state current drive for magnetic confinement plasmas using a novel experimental method. Stable, high-beta spheromaks have been sustained using steady, inductive current drive. Externally induced loop voltage and magnetic flux are oscillated together so that helicity and power injection are always positive, sustaining the edge plasma current indefinitely. Imposed-dynamo current drive (IDCD) theory further shows that the entire plasma current is sustained. The method is ideal for low aspect ratio, toroidal geometries with closed flux surfaces. Experimental studies of spheromak plasmas sustained with IDCD have shown stable magnetic profiles with evidence of pressure confinement. New measurements show coherent motion of a stable spheromak in response to the imposed perturbations. On the original device two helicity injectors were mounted on either side of the spheromak and the injected mode spectrum was predominantly n = 1. Coherent, rigid motion indicates that the spheromak is stable and a lack of plasma-generated n = 1 energy indicates that the maximum q is maintained below 1 during sustainment. Results from the HIT-SI3 device are also presented. Three inductive helicity injectors are mounted on one side of the spheromak flux conserver. Varying the relative injector phasing changes the injected mode spectrum which includes n = 2, 3, and higher modes.
- 31 May 2017
- Published by IOP Publishing in Nuclear Fusion
- Vol. 57 (7) , 076026
Plasma response to sustainment with imposed-dynamo current drive in HIT-SI and HIT-SI3
The helicity injected torus—steady inductive (HIT-SI) program studies efficient, steady-state current drive for magnetic confinement plasmas using a novel experimental method. Stable, high-beta spheromaks have been sustained using steady, inductive current drive. Externally induced loop voltage and magnetic flux are oscillated together so that helicity and power injection are always positive, sustaining the edge plasma current indefinitely. Imposed-dynamo current drive (IDCD) theory further shows that the entire plasma current is sustained. The method is ideal for low aspect ratio, toroidal geometries with closed flux surfaces. Experimental studies of spheromak plasmas sustained with IDCD have shown stable magnetic profiles with evidence of pressure confinement. New measurements show coherent motion of a stable spheromak in response to the imposed perturbations. On the original device two helicity injectors were mounted on either side of the spheromak and the injected mode spectrum was predominantly n = 1. Coherent, rigid motion indicates that the spheromak is stable and a lack of plasma-generated n = 1 energy indicates that the maximum q is maintained below 1 during sustainment. Results from the HIT-SI3 device are also presented. Three inductive helicity injectors are mounted on one side of the spheromak flux conserver. Varying the relative injector phasing changes the injected mode spectrum which includes n = 2, 3, and higher modes.
- 20 July 2016
- Published by AIP Publishing in Review of Scientific Instruments
- Vol. 87 (11) , 11E506
Two-photon LIF on the HIT-SI3 experiment: Absolute density and temperature measurements of deuterium neutrals
Two-photon laser-induced fluorescence measurements were performed on the helicity injected torus (HIT-SI3) device to determine the density and temperature of the background neutral deuterium population. Measurements were taken in 2 ms long pulsed plasmas after the inductive helicity injectors were turned off. Attempts to measure neutrals during the main phase of the plasma were unsuccessful, likely due to the density of neutrals being below the detection threshold of the diagnostic. An unexpectedly low density of atomic deuterium was measured in the afterglow; roughly 100 times lower than the theoretical prediction of 1017 m−3. The neutral temperatures measured were on the order of 1 eV. Temporally and spatially resolved neutral density and temperature data are presented.
- 20 July 2016
- Published by AIP Publishing in Review of Scientific Instruments
- Vol. 87 (11) , 11E506
Two-photon LIF on the HIT-SI3 experiment: Absolute density and temperature measurements of deuterium neutrals
Two-photon laser-induced fluorescence measurements were performed on the helicity injected torus (HIT-SI3) device to determine the density and temperature of the background neutral deuterium population. Measurements were taken in 2 ms long pulsed plasmas after the inductive helicity injectors were turned off. Attempts to measure neutrals during the main phase of the plasma were unsuccessful, likely due to the density of neutrals being below the detection threshold of the diagnostic. An unexpectedly low density of atomic deuterium was measured in the afterglow; roughly 100 times lower than the theoretical prediction of 1017 m−3. The neutral temperatures measured were on the order of 1 eV. Temporally and spatially resolved neutral density and temperature data are presented.