Michael Zanetti
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Previous Organizations / Institutes
The organizations / institutes from the scholar's other articles in the past ten years
Research Subjects
Michael Zanetti has a total of 137 co-authors. Here are the top co-authors by number of shared publications:
H. Hiesinger
Westfalische Wilhelms Univ Munster, Inst Planetol, Wilhelm Klemm Str 10, D-48149 Munster, Germany
9 shared publications- Dennis Reiss
Westfälische Wilhelms-Universität
8 shared publications A. Johnsson
5 shared publicationsL. Johansson
4 shared publicationsM. Olvmo
4 shared publicationsC.H. van der Bogert
3 shared publications
Latest Publications
- Open Access
- 22 August 2025
- Published by American Geophysical Union (AGU) in Geophysical Research Letters
- Vol. 52 (16)
Enhanced Seismic Backscattering for Lava Tube Detection
Lava tubes, a common volcanic feature on terrestrial planets, offer critical insights into lava flow processes and may serve as future potential habitats for space crews and other facilities on the Moon and Mars. Seismic detection of these features is challenging as the irregular morphology and rough cave ceilings and walls generate complex seismic wavefields dominated by strong scattering and reverberation rather than pure reflections. Here we present observations of enhanced backscattering in seismic data collected above terrestrial lava tubes. We show that the spatial and frequency characteristics of wavefield intensity can be related to the dimensions of the lava tubes. Our findings suggest that, when geological indicators such as collapse pits are present, this method would enable mapping lava tubes on Earth and, by proxy, on the Moon and Mars, and that the approach is readily adaptable for future planetary exploration.
- 22 August 2025
- Published by American Geophysical Union (AGU) in Geophysical Research Letters
- Vol. 52 (16)
Open AccessEnhanced Seismic Backscattering for Lava Tube Detection
Lava tubes, a common volcanic feature on terrestrial planets, offer critical insights into lava flow processes and may serve as future potential habitats for space crews and other facilities on the Moon and Mars. Seismic detection of these features is challenging as the irregular morphology and rough cave ceilings and walls generate complex seismic wavefields dominated by strong scattering and reverberation rather than pure reflections. Here we present observations of enhanced backscattering in seismic data collected above terrestrial lava tubes. We show that the spatial and frequency characteristics of wavefield intensity can be related to the dimensions of the lava tubes. Our findings suggest that, when geological indicators such as collapse pits are present, this method would enable mapping lava tubes on Earth and, by proxy, on the Moon and Mars, and that the approach is readily adaptable for future planetary exploration.
- 14 May 2023
- Published by Springer Nature
- p. 497-506
Lunar Crater Ejecta
- Open Access
Mid-infrared bi-directional reflectance spectroscopy of impact melt glasses and tektites
We have analyzed 14 impact melt glass samples, covering the compositional range from highly felsic to mafic/basaltic, as part of our effort to provide mid-infrared spectra (7-14 micron) for MERTIS (Mercury Radiometer and Thermal Infrared Spectrometer), an instrument onboard of the ESA/JAXA BepiColombo mission. Since Mercury was exposed to many impacts in its history, and impact glasses are also common on other bodies, powders of tektites (Irghizite, Libyan Desert Glass, Moldavite, Muong Nong, Thailandite) and impact glasses (from the Dellen, El'gygytgyn, Lonar, Mien, Mistastin, and Popigai impact structures) were analyzed in four size fractions of (0-25, 25-63, 93-125 and 125-250 micron) from 2.5 to 19 micron in bi-directional reflectance. The characteristic Christiansen Feature (CF) is identified between 7.3 micron (Libyan Desert Glass) and 8.2 micron (Dellen). Most samples show mid-infrared spectra typical of highly amorphous material, dominated by a strong Reststrahlen Band (RB) between 8.9 micron (Libyan Desert Glass) and 10.3 micron (Dellen). Even substantial amounts of mineral fragments hardly affect this general band shape. Comparisons of the SiO2 content representing the felsic/mafic composition of the samples with the CF shows felsic/intermediate glass and tektites forming a big group, and comparatively mafic samples a second one. An additional sign of a highly amorphous state is the lack of features at wavelengths longer than about 15 micron. The tektites and two impact glasses, Irghizite and El'gygytgyn respectively, have much weaker water features than most of the other impact glasses.
Open AccessMid-infrared bi-directional reflectance spectroscopy of impact melt glasses and tektites
We have analyzed 14 impact melt glass samples, covering the compositional range from highly felsic to mafic/basaltic, as part of our effort to provide mid-infrared spectra (7-14 micron) for MERTIS (Mercury Radiometer and Thermal Infrared Spectrometer), an instrument onboard of the ESA/JAXA BepiColombo mission. Since Mercury was exposed to many impacts in its history, and impact glasses are also common on other bodies, powders of tektites (Irghizite, Libyan Desert Glass, Moldavite, Muong Nong, Thailandite) and impact glasses (from the Dellen, El'gygytgyn, Lonar, Mien, Mistastin, and Popigai impact structures) were analyzed in four size fractions of (0-25, 25-63, 93-125 and 125-250 micron) from 2.5 to 19 micron in bi-directional reflectance. The characteristic Christiansen Feature (CF) is identified between 7.3 micron (Libyan Desert Glass) and 8.2 micron (Dellen). Most samples show mid-infrared spectra typical of highly amorphous material, dominated by a strong Reststrahlen Band (RB) between 8.9 micron (Libyan Desert Glass) and 10.3 micron (Dellen). Even substantial amounts of mineral fragments hardly affect this general band shape. Comparisons of the SiO2 content representing the felsic/mafic composition of the samples with the CF shows felsic/intermediate glass and tektites forming a big group, and comparatively mafic samples a second one. An additional sign of a highly amorphous state is the lack of features at wavelengths longer than about 15 micron. The tektites and two impact glasses, Irghizite and El'gygytgyn respectively, have much weaker water features than most of the other impact glasses.
- 2 January 2019
- Published by Taylor & Francis in Canadian Journal of Remote Sensing
- Vol. 45 (1) , 54-72
A Polarimetric SAR and Multispectral Remote Sensing Approach for Mapping Salt Diapirs: Axel Heiberg Island, NU, Canada
Remote sensing has revolutionized resource exploration by enabling quick surveillance of large areas. Quad-polarimetric synthetic aperture radar (SAR) is useful for assessing surface roughness, but few studies have applied it for geological mapping. Located in the Canadian Arctic, Axel Heiberg Island is a suitable site for exploring remote predictive geologic mapping techniques that combine quad-polarimetric SAR and multispectral datasets. The island has extensive rock exposure, with little interference from vegetation and snow in late summer. Axel Heiberg Island has the second highest concentration of salt diapirs globally. As a result, it also hosts extensive secondary salt deposits that have been weathered and precipitated away from their source. Because diapirs frequently provide structural traps for petroleum reservoirs, it is important to distinguish between diapiric and non-diapiric salt during early exploration. This study maps diapirs and secondary salts using multispectral data and characterizes them in polarimetric SAR. Diapirs appear rough in C-Band and L-Band radar, whereas the secondary salts appear smooth at both (cm–dm) scales. Field observations confirm salt diapirs are rough at the millimeter–meter scales, whereas secondary salts precipitate on smoother surfaces. These results show that radar can help differentiate between diapiric and secondary salt exposures, which will assist in future resource exploration.
- 2 January 2019
- Published by Taylor & Francis in Canadian Journal of Remote Sensing
- Vol. 45 (1) , 54-72
A Polarimetric SAR and Multispectral Remote Sensing Approach for Mapping Salt Diapirs: Axel Heiberg Island, NU, Canada
Remote sensing has revolutionized resource exploration by enabling quick surveillance of large areas. Quad-polarimetric synthetic aperture radar (SAR) is useful for assessing surface roughness, but few studies have applied it for geological mapping. Located in the Canadian Arctic, Axel Heiberg Island is a suitable site for exploring remote predictive geologic mapping techniques that combine quad-polarimetric SAR and multispectral datasets. The island has extensive rock exposure, with little interference from vegetation and snow in late summer. Axel Heiberg Island has the second highest concentration of salt diapirs globally. As a result, it also hosts extensive secondary salt deposits that have been weathered and precipitated away from their source. Because diapirs frequently provide structural traps for petroleum reservoirs, it is important to distinguish between diapiric and non-diapiric salt during early exploration. This study maps diapirs and secondary salts using multispectral data and characterizes them in polarimetric SAR. Diapirs appear rough in C-Band and L-Band radar, whereas the secondary salts appear smooth at both (cm–dm) scales. Field observations confirm salt diapirs are rough at the millimeter–meter scales, whereas secondary salts precipitate on smoother surfaces. These results show that radar can help differentiate between diapiric and secondary salt exposures, which will assist in future resource exploration.
- 27 December 2018
- Published by Wiley in Permafrost and Periglacial Processes
- Vol. 30 (1) , 19-34
Geomorphology of Gullies at Thomas Lee Inlet, Devon Island, Canadian High Arctic
Slopes in and around Thomas Lee Inlet (Devon Island, Nunavut, Canada) are eroded by means of gullying, yet the driving factors, such as the nature of the substrate and availability of different sources for water, influencing gully morphology remain poorly understood. Here we investigate the factors that contribute to gully formation using a combination of satellite mapping, field observations and statistical analysis of morphological data. In total, 161 gullies were mapped within the 126 km2 study area. Factors linked to gullies, such as the nature of its substrate and the presence of glaciers, were integrated into a spatial geodatabase. A Factor Analysis of Mixed Data performed on the geodatabase was used to discriminate which factors may influence gully geometry. Our results show that the type of geological formation has a strong impact on gully slope. In addition, supplemental sources of water are often found near alcoves of the steep, longer and mature gullies, and levees often form in their aprons. Immature debris flow‐like gullies were dryer and found on short and variable (from steep to gentle) slopes. This detailed study of the rocky and arid Thomas Lee Inlet plateaus and slopes provides the first insight into gullied slopes as a hydrological component connecting upland units to downslope in this area.
- 27 December 2018
- Published by Wiley in Permafrost and Periglacial Processes
- Vol. 30 (1) , 19-34
Geomorphology of Gullies at Thomas Lee Inlet, Devon Island, Canadian High Arctic
Slopes in and around Thomas Lee Inlet (Devon Island, Nunavut, Canada) are eroded by means of gullying, yet the driving factors, such as the nature of the substrate and availability of different sources for water, influencing gully morphology remain poorly understood. Here we investigate the factors that contribute to gully formation using a combination of satellite mapping, field observations and statistical analysis of morphological data. In total, 161 gullies were mapped within the 126 km2 study area. Factors linked to gullies, such as the nature of its substrate and the presence of glaciers, were integrated into a spatial geodatabase. A Factor Analysis of Mixed Data performed on the geodatabase was used to discriminate which factors may influence gully geometry. Our results show that the type of geological formation has a strong impact on gully slope. In addition, supplemental sources of water are often found near alcoves of the steep, longer and mature gullies, and levees often form in their aprons. Immature debris flow‐like gullies were dryer and found on short and variable (from steep to gentle) slopes. This detailed study of the rocky and arid Thomas Lee Inlet plateaus and slopes provides the first insight into gullied slopes as a hydrological component connecting upland units to downslope in this area.
- 25 November 2018
- Published by Wiley in Meteoritics & Planetary Science
- Vol. 54 (10) , 2167-2188
Petrogenesis of lunar impact melt rock meteorite Oued Awlitis 001
Oued Awlitis 001 is a highly feldspathic, moderately equilibrated, clast‐rich, poikilitic impact melt rock lunar meteorite that was recovered in 2014. Its poikilitic texture formed due to moderately slow cooling, which judging from textures of rocks in melt sheets of terrestrial impact structures, is observed in impact melt volumes at least 100 m thick. Such coherent impact melt volumes occur in lunar craters larger than ~50 km in diameter. The composition of Oued Awlitis 001 points toward a crustal origin distant from incompatible‐element‐rich regions. Comparison of the bulk composition of Oued Awlitis 001 with Lunar Prospector 5° γ‐ray spectrometer data indicates a limited region of matches on the lunar farside. After its initial formation in an impact crater larger than ~50 km in diameter, Oued Awlitis 001 was excavated from a depth greater than ~50 m. The cosmogenic nuclide inventory of Oued Awlitis 001 records ejection from the Moon 0.3 Ma ago from a depth of at least 4 m and little mass loss due to ablation during its passage through Earth's atmosphere. The terrestrial residence time must have been very short, probably less than a few hundred years; its exact determination was precluded by a high concentration of solar cosmic ray‐produced 14C. If the impact that excavated Oued Awlitis 001 also launched it, this event likely produced an impact crater >10 km in diameter. Using petrologic constraints and Lunar Reconnaissance Orbiter Camera and Diviner data, we test Giordano Bruno and Pierazzo as possible launch craters for Oued Awlitis 001.
- 25 November 2018
- Published by Wiley in Meteoritics & Planetary Science
- Vol. 54 (10) , 2167-2188
Petrogenesis of lunar impact melt rock meteorite Oued Awlitis 001
Oued Awlitis 001 is a highly feldspathic, moderately equilibrated, clast‐rich, poikilitic impact melt rock lunar meteorite that was recovered in 2014. Its poikilitic texture formed due to moderately slow cooling, which judging from textures of rocks in melt sheets of terrestrial impact structures, is observed in impact melt volumes at least 100 m thick. Such coherent impact melt volumes occur in lunar craters larger than ~50 km in diameter. The composition of Oued Awlitis 001 points toward a crustal origin distant from incompatible‐element‐rich regions. Comparison of the bulk composition of Oued Awlitis 001 with Lunar Prospector 5° γ‐ray spectrometer data indicates a limited region of matches on the lunar farside. After its initial formation in an impact crater larger than ~50 km in diameter, Oued Awlitis 001 was excavated from a depth greater than ~50 m. The cosmogenic nuclide inventory of Oued Awlitis 001 records ejection from the Moon 0.3 Ma ago from a depth of at least 4 m and little mass loss due to ablation during its passage through Earth's atmosphere. The terrestrial residence time must have been very short, probably less than a few hundred years; its exact determination was precluded by a high concentration of solar cosmic ray‐produced 14C. If the impact that excavated Oued Awlitis 001 also launched it, this event likely produced an impact crater >10 km in diameter. Using petrologic constraints and Lunar Reconnaissance Orbiter Camera and Diviner data, we test Giordano Bruno and Pierazzo as possible launch craters for Oued Awlitis 001.
- Open Access
- 20 April 2018
- Published by Copernicus GmbH in The Cryosphere
- Vol. 12 (4) , 1461-1478
Subglacial drainage patterns of Devon Island, Canada: detailed comparison of rivers and subglacial meltwater channels
Subglacial meltwater channels (N-channels) are attributed to erosion by meltwater in subglacial conduits. They exert a major control on meltwater accumulation at the base of ice sheets, serving as drainage pathways and modifying ice flow rates. The study of exposed relict subglacial channels offers a unique opportunity to characterize the geomorphologic fingerprint of subglacial erosion as well as study the structure and characteristics of ice sheet drainage systems. In this study we present detailed field and remote sensing observations of exposed subglacial meltwater channels in excellent preservation state on Devon Island (Canadian Arctic Archipelago). We characterize channel cross section, longitudinal profiles, and network morphologies and establish the spatial extent and distinctive characteristics of subglacial drainage systems. We use field-based GPS measurements of subglacial channel longitudinal profiles, along with stereo imagery-derived digital surface models (DSMs), and novel kinematic portable lidar data to establish a detailed characterization of subglacial channels in our field study area, including their distinction from rivers and other meltwater drainage systems. Subglacial channels typically cluster in groups of ∼10 channels and are oriented perpendicular to active or former ice margins. Although their overall direction generally follows topographic gradients, channels can be oblique to topographic gradients and have undulating longitudinal profiles. We also observe that the width of first-order tributaries is 1 to 2 orders of magnitude larger than in Devon Island river systems and approximately constant. Furthermore, our findings are consistent with theoretical expectations drawn from analyses of flow driven by gradients in effective water pressure related to variations in ice thickness. Our field and remote sensing observations represent the first high-resolution study of the subglacial geomorphology of the high Arctic, and provide quantitative and qualitative descriptions of subglacial channels that revisit well-established field identification guidelines. Distinguishing subglacial channels in topographic data is critical for understanding the emergence, geometry, and extent of channelized meltwater systems and their role in ice sheet drainage. The final aim of this study is to facilitate the identification of subglacial channel networks throughout the globe by using remote sensing techniques, which will improve the detection of these systems and help to build understanding of the underlying mechanics of subglacial channelized drainage.
- 20 April 2018
- Published by Copernicus GmbH in The Cryosphere
- Vol. 12 (4) , 1461-1478
Open AccessSubglacial drainage patterns of Devon Island, Canada: detailed comparison of rivers and subglacial meltwater channels
Subglacial meltwater channels (N-channels) are attributed to erosion by meltwater in subglacial conduits. They exert a major control on meltwater accumulation at the base of ice sheets, serving as drainage pathways and modifying ice flow rates. The study of exposed relict subglacial channels offers a unique opportunity to characterize the geomorphologic fingerprint of subglacial erosion as well as study the structure and characteristics of ice sheet drainage systems. In this study we present detailed field and remote sensing observations of exposed subglacial meltwater channels in excellent preservation state on Devon Island (Canadian Arctic Archipelago). We characterize channel cross section, longitudinal profiles, and network morphologies and establish the spatial extent and distinctive characteristics of subglacial drainage systems. We use field-based GPS measurements of subglacial channel longitudinal profiles, along with stereo imagery-derived digital surface models (DSMs), and novel kinematic portable lidar data to establish a detailed characterization of subglacial channels in our field study area, including their distinction from rivers and other meltwater drainage systems. Subglacial channels typically cluster in groups of ∼10 channels and are oriented perpendicular to active or former ice margins. Although their overall direction generally follows topographic gradients, channels can be oblique to topographic gradients and have undulating longitudinal profiles. We also observe that the width of first-order tributaries is 1 to 2 orders of magnitude larger than in Devon Island river systems and approximately constant. Furthermore, our findings are consistent with theoretical expectations drawn from analyses of flow driven by gradients in effective water pressure related to variations in ice thickness. Our field and remote sensing observations represent the first high-resolution study of the subglacial geomorphology of the high Arctic, and provide quantitative and qualitative descriptions of subglacial channels that revisit well-established field identification guidelines. Distinguishing subglacial channels in topographic data is critical for understanding the emergence, geometry, and extent of channelized meltwater systems and their role in ice sheet drainage. The final aim of this study is to facilitate the identification of subglacial channel networks throughout the globe by using remote sensing techniques, which will improve the detection of these systems and help to build understanding of the underlying mechanics of subglacial channelized drainage.