Zhenyu Tan
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Zhenyu Tan has a total of 26 co-authors. Here are the top co-authors by number of shared publications:
- Michael A. Cianfrocco
Life Sciences Institute, Department of Biological Chemistry, University of Michigan, Ann Arbor, Michigan, 48109, USA
5 shared publications - Alexey Nesvizhskii
Department of Pathology, University of Michigan, Ann Arbor, MI, USA
4 shared publications - Sarah E. Haynes
Department of Pathology, University of Michigan
4 shared publications - Kristen J. Verhey
Department of Cell and Developmental Biology, University of Michigan, Ann Arbor, MI, USA
3 shared publications Yang Yue
Department of Cell & Developmental Biology, University of Michigan
3 shared publications- April L. Solon
Department of Cell & Developmental Biology, University of Michigan, Ann Arbor, Michigan
2 shared publications
Latest Publications
- Open Access
- 24 March 2026
- Published by National Academy of Sciences in Proceedings of the National Academy of Sciences
- Vol. 123 (13)
Fab–Fc and Fab–Fab interactions of variable strength and valency contribute to the high concentration viscosity of IgG 1 antibodies
The variable domains in Fab regions are well-established contributors to high concentration viscosity of IgG, primarily through charge and hydrophobic interactions. In contrast, the roles of the Fc and the number of self-interacting sites (valency) are less well understood. Here, we investigate the relative contributions of Fab–Fab and Fab–Fc interactions to high concentration viscosity for a diverse panel of 20 IgG 1 antibodies, by rheometry, coarse-grained simulations, and molecular surface property analysis. Strikingly, fragmentation of IgG 1 into F(ab′) 2 plus Fc reduced viscosity (−11 to −93%) for all antibodies tested, demonstrating prevalent contributions of Fc to viscosity. Coarse-grained simulations with one site per Fab and two sites per Fc qualitatively tracked trends in experimental rheometry data for 20 parental antibodies and their fragments. In these simulations Fab–Fab and Fab–Fc interaction strengths were independently varied to capture possible interaction differences arising from parental sequences or any mutations. These coarse-grained simulations suggest that Fab–Fc attractions generate branched IgG 1 networks and disproportionately larger clusters relative to Fab–Fab interactions of comparable strength. This study suggests that a four-site self-interaction model, previously proposed for a single antibody (omalizumab), is broadly applicable to diverse IgG 1 . Beyond well-established variable domain engineering, this self-interaction model predicts that Fc engineering may reduce IgG 1 viscosity, a much sought after goal to enable subcutaneous delivery. Clinically validated Fc mutations are demonstrated here to substantially reduce the viscosity for multiple IgG 1 (−33 to −91% reduction, n = 6), supporting this emerging antibody design concept.
- 24 March 2026
- Published by National Academy of Sciences in Proceedings of the National Academy of Sciences
- Vol. 123 (13)
Open AccessFab–Fc and Fab–Fab interactions of variable strength and valency contribute to the high concentration viscosity of IgG 1 antibodies
The variable domains in Fab regions are well-established contributors to high concentration viscosity of IgG, primarily through charge and hydrophobic interactions. In contrast, the roles of the Fc and the number of self-interacting sites (valency) are less well understood. Here, we investigate the relative contributions of Fab–Fab and Fab–Fc interactions to high concentration viscosity for a diverse panel of 20 IgG 1 antibodies, by rheometry, coarse-grained simulations, and molecular surface property analysis. Strikingly, fragmentation of IgG 1 into F(ab′) 2 plus Fc reduced viscosity (−11 to −93%) for all antibodies tested, demonstrating prevalent contributions of Fc to viscosity. Coarse-grained simulations with one site per Fab and two sites per Fc qualitatively tracked trends in experimental rheometry data for 20 parental antibodies and their fragments. In these simulations Fab–Fab and Fab–Fc interaction strengths were independently varied to capture possible interaction differences arising from parental sequences or any mutations. These coarse-grained simulations suggest that Fab–Fc attractions generate branched IgG 1 networks and disproportionately larger clusters relative to Fab–Fab interactions of comparable strength. This study suggests that a four-site self-interaction model, previously proposed for a single antibody (omalizumab), is broadly applicable to diverse IgG 1 . Beyond well-established variable domain engineering, this self-interaction model predicts that Fc engineering may reduce IgG 1 viscosity, a much sought after goal to enable subcutaneous delivery. Clinically validated Fc mutations are demonstrated here to substantially reduce the viscosity for multiple IgG 1 (−33 to −91% reduction, n = 6), supporting this emerging antibody design concept.
- Open Access
- 1 November 2023
- Published by eLife Sciences Publications, Ltd in eLife
- Vol. 12
Autoinhibited kinesin-1 adopts a hierarchical folding pattern
Conventional kinesin-1 is the primary anterograde motor in cells for transporting cellular cargo. While there is a consensus that the C-terminal tail of kinesin-1 inhibits motility, the molecular architecture of a full-length autoinhibited kinesin-1 remains unknown. Here, we combine crosslinking mass spectrometry (XL-MS), electron microscopy (EM), and AlphaFold structure prediction to determine the architecture of the full-length autoinhibited kinesin-1 homodimer (kinesin-1 heavy chain [KHC]) and kinesin-1 heterotetramer (KHC bound to kinesin light chain 1 [KLC1]). Our integrative analysis shows that kinesin-1 forms a compact, bent conformation through a break in coiled-coil 3. Moreover, our XL-MS analysis demonstrates that kinesin light chains stabilize the folded inhibited state rather than inducing a new structural state. Using our structural model, we show that disruption of multiple interactions between the motor, stalk, and tail domains is required to activate the full-length kinesin-1. Our work offers a conceptual framework for understanding how cargo adaptors and microtubule-associated proteins relieve autoinhibition to promote activation.
- 1 November 2023
- Published by eLife Sciences Publications, Ltd in eLife
- Vol. 12
Open AccessAutoinhibited kinesin-1 adopts a hierarchical folding pattern
Conventional kinesin-1 is the primary anterograde motor in cells for transporting cellular cargo. While there is a consensus that the C-terminal tail of kinesin-1 inhibits motility, the molecular architecture of a full-length autoinhibited kinesin-1 remains unknown. Here, we combine crosslinking mass spectrometry (XL-MS), electron microscopy (EM), and AlphaFold structure prediction to determine the architecture of the full-length autoinhibited kinesin-1 homodimer (kinesin-1 heavy chain [KHC]) and kinesin-1 heterotetramer (KHC bound to kinesin light chain 1 [KLC1]). Our integrative analysis shows that kinesin-1 forms a compact, bent conformation through a break in coiled-coil 3. Moreover, our XL-MS analysis demonstrates that kinesin light chains stabilize the folded inhibited state rather than inducing a new structural state. Using our structural model, we show that disruption of multiple interactions between the motor, stalk, and tail domains is required to activate the full-length kinesin-1. Our work offers a conceptual framework for understanding how cargo adaptors and microtubule-associated proteins relieve autoinhibition to promote activation.
- 27 October 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- Vol. 62, 1-6
Estimation of Motion Status and Road Parameters for Distributed-drive Vehicles under Time-Varying Road Conditions
The partially varying parameters required for autonomous driving stability control need to be estimated from readily available parameters. Firstly, a 7-degree-of-freedom dynamics model and a Dugoff tyre dynamics model are established. Then, the observation variables are defined according to the estimation parameters, the state-space equations are established for the estimation, and the joint estimation of motion state and road parameters is carried out in real time by applying the unscented Kalman filter and correlating the different estimation modules with each other. Finally, a simulation model for time-varying road conditions is established, and the results show that the joint estimation model can effectively estimate the motion state and road parameters.
- 27 October 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- Vol. 62, 1-6
Estimation of Motion Status and Road Parameters for Distributed-drive Vehicles under Time-Varying Road Conditions
The partially varying parameters required for autonomous driving stability control need to be estimated from readily available parameters. Firstly, a 7-degree-of-freedom dynamics model and a Dugoff tyre dynamics model are established. Then, the observation variables are defined according to the estimation parameters, the state-space equations are established for the estimation, and the joint estimation of motion state and road parameters is carried out in real time by applying the unscented Kalman filter and correlating the different estimation modules with each other. Finally, a simulation model for time-varying road conditions is established, and the results show that the joint estimation model can effectively estimate the motion state and road parameters.
- Open Access
- 17 October 2023
- Published by eLife Sciences Publications, Ltd in eLife preprints
- Vol. 12
Autoinhibited kinesin-1 adopts a hierarchical folding pattern
Conventional kinesin-1 is the primary anterograde motor in cells for transporting cellular cargo. While there is a consensus that the C-terminal tail of kinesin-1 inhibits motility, the molecular architecture of a full-length autoinhibited kinesin-1 remains unknown. Here, we combine cross-linking mass spectrometry (XL-MS), electron microscopy (EM), and AlphaFold structure prediction to determine the architecture of the full-length autoinhibited kinesin-1 homodimer [kinesin-1 heavy chain (KHC)] and kinesin-1 heterotetramer [KHC bound to kinesin light chain 1 (KLC1)]. Our integrative analysis shows that kinesin-1 forms a compact, bent conformation through a break in coiled coil 3. Moreover, our XL-MS analysis demonstrates that kinesin light chains stabilize the folded inhibited state rather than inducing a new structural state. Using our structural model, we show that disruption of multiple interactions between the motor, stalk, and tail domains is required to activate the full-length kinesin-1. Our work offers a conceptual framework for understanding how cargo adaptors and microtubule-associated proteins relieve autoinhibition to promote activation.
- 17 October 2023
- Published by eLife Sciences Publications, Ltd in eLife preprints
- Vol. 12
Open AccessAutoinhibited kinesin-1 adopts a hierarchical folding pattern
Conventional kinesin-1 is the primary anterograde motor in cells for transporting cellular cargo. While there is a consensus that the C-terminal tail of kinesin-1 inhibits motility, the molecular architecture of a full-length autoinhibited kinesin-1 remains unknown. Here, we combine cross-linking mass spectrometry (XL-MS), electron microscopy (EM), and AlphaFold structure prediction to determine the architecture of the full-length autoinhibited kinesin-1 homodimer [kinesin-1 heavy chain (KHC)] and kinesin-1 heterotetramer [KHC bound to kinesin light chain 1 (KLC1)]. Our integrative analysis shows that kinesin-1 forms a compact, bent conformation through a break in coiled coil 3. Moreover, our XL-MS analysis demonstrates that kinesin light chains stabilize the folded inhibited state rather than inducing a new structural state. Using our structural model, we show that disruption of multiple interactions between the motor, stalk, and tail domains is required to activate the full-length kinesin-1. Our work offers a conceptual framework for understanding how cargo adaptors and microtubule-associated proteins relieve autoinhibition to promote activation.
- Open Access
Autoinhibited kinesin-1 adopts a hierarchical folding pattern
Conventional kinesin-1 is the primary anterograde motor in cells for transporting cellular cargo. While there is a consensus that the C-terminal tail of kinesin-1 inhibits motility, the molecular architecture of a full-length autoinhibited kinesin-1 remains unknown. Here, we combine cross-linking mass spectrometry (XL-MS), electron microscopy (EM), and AlphaFold structure prediction to determine the architecture of the full-length autoinhibited kinesin-1 homodimer [kinesin-1 heavy chain (KHC)] and kinesin-1 heterotetramer [KHC bound to kinesin light chain 1 (KLC1)]. Our integrative analysis shows that kinesin-1 forms a compact, bent conformation through a break in coiled coil 3. Moreover, our XL-MS analysis demonstrates that kinesin light chains stabilize the folded inhibited state rather than inducing a new structural state. Using our structural model, we show that disruption of multiple interactions between the motor, stalk, and tail domains is required to activate the full-length kinesin-1. Our work offers a conceptual framework for understanding how cargo adaptors and microtubule-associated proteins relieve autoinhibition to promote activation.
Open AccessAutoinhibited kinesin-1 adopts a hierarchical folding pattern
Conventional kinesin-1 is the primary anterograde motor in cells for transporting cellular cargo. While there is a consensus that the C-terminal tail of kinesin-1 inhibits motility, the molecular architecture of a full-length autoinhibited kinesin-1 remains unknown. Here, we combine cross-linking mass spectrometry (XL-MS), electron microscopy (EM), and AlphaFold structure prediction to determine the architecture of the full-length autoinhibited kinesin-1 homodimer [kinesin-1 heavy chain (KHC)] and kinesin-1 heterotetramer [KHC bound to kinesin light chain 1 (KLC1)]. Our integrative analysis shows that kinesin-1 forms a compact, bent conformation through a break in coiled coil 3. Moreover, our XL-MS analysis demonstrates that kinesin light chains stabilize the folded inhibited state rather than inducing a new structural state. Using our structural model, we show that disruption of multiple interactions between the motor, stalk, and tail domains is required to activate the full-length kinesin-1. Our work offers a conceptual framework for understanding how cargo adaptors and microtubule-associated proteins relieve autoinhibition to promote activation.
- Open Access
- 19 November 2021
- Published by American Association for the Advancement of Science (AAAS) in Science Advances
- Vol. 7 (47)
Kinesin-binding protein remodels the kinesin motor to prevent microtubule binding
Kinesin-binding protein inhibits kinesin activity through structural alterations of the kinesin motor domain.
- 19 November 2021
- Published by American Association for the Advancement of Science (AAAS) in Science Advances
- Vol. 7 (47)
Open AccessKinesin-binding protein remodels the kinesin motor to prevent microtubule binding
Kinesin-binding protein inhibits kinesin activity through structural alterations of the kinesin motor domain.
- Open Access
Kinesin-binding protein remodels the kinesin motor to prevent microtubule-binding
Kinesins are tightly regulated in space and time to control their activation in the absence of cargo-binding. Kinesin-binding protein (KIFBP) was recently discovered to bind the catalytic motor heads of 8 of the 45 known kinesin superfamily members and inhibit binding to microtubules. In humans, mutation of KIFBP gives rise to Goldberg-Shprintzen syndrome (GOSHS), but the kinesin(s) that is misregulated to produce clinical features of the disease is not known. Understanding the structural mechanism by which KIFBP selects its kinesin binding partners will be key to unlocking this knowledge. Using a combination of cryo-electron microscopy and crosslinking mass spectrometry, we determined structures of KIFBP alone and in complex with two mitotic kinesins, revealing regions of KIFBP that participate in complex formation. KIFBP adopts an alpha-helical solenoid structure composed of TPR repeats. We find that KIFBP uses a 2-pronged mechanism to remodel kinesin motors and block microtubule-binding. First, KIFBP engages the microtubule-binding interface and sterically blocks interaction with microtubules. Second, KIFBP induces allosteric conformational changes to the kinesin motor head that displace a key structural element in the kinesin motor head (α-helix 4) required for microtubule binding. We identified two regions of KIFBP necessary for in vitro kinesin-binding as well as cellular regulation during mitosis. Taken together, this work establishes the mechanism of kinesin inhibition by KIFBP and provides the first example of motor domain remodeling as a means to abrogate kinesin activity.
Open AccessKinesin-binding protein remodels the kinesin motor to prevent microtubule-binding
Kinesins are tightly regulated in space and time to control their activation in the absence of cargo-binding. Kinesin-binding protein (KIFBP) was recently discovered to bind the catalytic motor heads of 8 of the 45 known kinesin superfamily members and inhibit binding to microtubules. In humans, mutation of KIFBP gives rise to Goldberg-Shprintzen syndrome (GOSHS), but the kinesin(s) that is misregulated to produce clinical features of the disease is not known. Understanding the structural mechanism by which KIFBP selects its kinesin binding partners will be key to unlocking this knowledge. Using a combination of cryo-electron microscopy and crosslinking mass spectrometry, we determined structures of KIFBP alone and in complex with two mitotic kinesins, revealing regions of KIFBP that participate in complex formation. KIFBP adopts an alpha-helical solenoid structure composed of TPR repeats. We find that KIFBP uses a 2-pronged mechanism to remodel kinesin motors and block microtubule-binding. First, KIFBP engages the microtubule-binding interface and sterically blocks interaction with microtubules. Second, KIFBP induces allosteric conformational changes to the kinesin motor head that displace a key structural element in the kinesin motor head (α-helix 4) required for microtubule binding. We identified two regions of KIFBP necessary for in vitro kinesin-binding as well as cellular regulation during mitosis. Taken together, this work establishes the mechanism of kinesin inhibition by KIFBP and provides the first example of motor domain remodeling as a means to abrogate kinesin activity.