Peijun Ma
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Peijun Ma has a total of 59 co-authors. Here are the top co-authors by number of shared publications:
- Yue Hao
Guangzhou Wide Bandgap Semiconductor Innovation Center, Guangzhou Institute of Technology, Xidian University 1 , Guangzhou 510555
5 shared publications - Jiangyi Shi
Xidian University
4 shared publications - Weitao Pan
State Key Laboratory of Integrated Service Networks, Xidian University, Xian, China
4 shared publications Yue Hao
Key Laboratory of Wide Band Gap Semiconductor Materials and Devices, School of Microelectronics, Xidian University, xian, CHINA
4 shared publications- Xiaohua Ma
Xidian University
3 shared publications - Ge Shang
State Key Discipline Laboratory of Wide Bandgap Semiconductor Technology, School of Microelectronics, Xidian University, Xian, China
2 shared publications
Latest Publications
- Open Access
- 1 April 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal of the Electron Devices Society
- Vol. 13, 334-342
Proposal and Simulation of β-Ga₂O₃ Hetero- Junction Schottky Diodes With Low Work-Function Anode and High Breakdown Voltage
In this work, we propose a p-NiO/n-Ga2O3 hetero-junction (HJ) Schottky barrier diode (SBD) with low turn-on voltage (Von) and high breakdown voltage (BV) with a trench SBD as a control. An investigation of its electrical characteristics is simulated by Sentaurus TCAD. The HJ SBD utilizes a low work-function anode metal to form a top electrode by reducing the Von of the diode at the forward state. A fin structure and metal/semiconductor (M/S) junction or PN HJ was employed to achieve an enhanced BV at the reverse state. An attempt to optimize the electrical characteristics of the device by modifying its structural parameters is also comprehensively analyzed in this work. The HJ SBD achieves a low Von of 0.57 V and a Power Figure of Merit (P-FOM) of 3.79 GW/cm2, simultaneously. The proposed structure provides a new approach for realizing high performance β-Ga2O3 SBDs with high reverse blocking and low loss capabilities.
- 1 April 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal of the Electron Devices Society
- Vol. 13, 334-342
Open AccessProposal and Simulation of β-Ga₂O₃ Hetero- Junction Schottky Diodes With Low Work-Function Anode and High Breakdown Voltage
In this work, we propose a p-NiO/n-Ga2O3 hetero-junction (HJ) Schottky barrier diode (SBD) with low turn-on voltage (Von) and high breakdown voltage (BV) with a trench SBD as a control. An investigation of its electrical characteristics is simulated by Sentaurus TCAD. The HJ SBD utilizes a low work-function anode metal to form a top electrode by reducing the Von of the diode at the forward state. A fin structure and metal/semiconductor (M/S) junction or PN HJ was employed to achieve an enhanced BV at the reverse state. An attempt to optimize the electrical characteristics of the device by modifying its structural parameters is also comprehensively analyzed in this work. The HJ SBD achieves a low Von of 0.57 V and a Power Figure of Merit (P-FOM) of 3.79 GW/cm2, simultaneously. The proposed structure provides a new approach for realizing high performance β-Ga2O3 SBDs with high reverse blocking and low loss capabilities.
- 25 February 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Circuits and Systems I: Regular Papers
- Vol. 72 (6) , 2726-2739
A Novel Transform Accelerator With Fast Kernel Selection and Efficient Transform Circuit
The introduction of multiple transform types into the Versatile Video Coding (VVC) standard has yielded notable encoding gains but also resulted in substantial computational burdens, posing two critical challenges for hardware implementation: fast kernel selection and efficient transform computation design. Existing studies typically address these challenges in isolation, lacking a holistic solution for VVC transform coding. In this paper, we presents a groundbreaking transform accelerator that unifies transform kernel selection and multiple transform circuit within a single framework. In terms of algorithms, driven by mechanistic analysis, we propose a decision tree-based kernel selection algorithm that ensures both high decision accuracy and computational efficiency. Additionally, we design a transfer matrix-based approximation algorithm for Discrete Sine Transform Type-7 and a matrix decomposition-based improved computation for Discrete Cosine Transform Type-2, significantly reducing the computational complexity. On the hardware front, we implement a high-precision and area-efficient transform accelerator, which integrates highly pipelined kernel selection and transform computation architectures. With multiple reuse and parallelism strategies, the accelerator demonstrates substantial resource efficiency advantages. Experimental results reveal that the proposed accelerator achieves a circuit resource reduction of over 44% with a slight performance degradation, while maintaining processing capabilities up to 8K@57 fps. To the best of our knowledge, this is the first comprehensive hardware solution for VVC transform coding that jointly addresses the challenges of kernel selection and transform circuit design.
- 25 February 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Circuits and Systems I: Regular Papers
- Vol. 72 (6) , 2726-2739
A Novel Transform Accelerator With Fast Kernel Selection and Efficient Transform Circuit
The introduction of multiple transform types into the Versatile Video Coding (VVC) standard has yielded notable encoding gains but also resulted in substantial computational burdens, posing two critical challenges for hardware implementation: fast kernel selection and efficient transform computation design. Existing studies typically address these challenges in isolation, lacking a holistic solution for VVC transform coding. In this paper, we presents a groundbreaking transform accelerator that unifies transform kernel selection and multiple transform circuit within a single framework. In terms of algorithms, driven by mechanistic analysis, we propose a decision tree-based kernel selection algorithm that ensures both high decision accuracy and computational efficiency. Additionally, we design a transfer matrix-based approximation algorithm for Discrete Sine Transform Type-7 and a matrix decomposition-based improved computation for Discrete Cosine Transform Type-2, significantly reducing the computational complexity. On the hardware front, we implement a high-precision and area-efficient transform accelerator, which integrates highly pipelined kernel selection and transform computation architectures. With multiple reuse and parallelism strategies, the accelerator demonstrates substantial resource efficiency advantages. Experimental results reveal that the proposed accelerator achieves a circuit resource reduction of over 44% with a slight performance degradation, while maintaining processing capabilities up to 8K@57 fps. To the best of our knowledge, this is the first comprehensive hardware solution for VVC transform coding that jointly addresses the challenges of kernel selection and transform circuit design.
- 24 January 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Very Large Scale Integration (VLSI) Systems
- Vol. 33 (3) , 902
Corrections to “GNN-Based Hardware Trojan Detection at Register Transfer Level Leveraging Multiple-Category Features”
Presents corrections to the paper, (Corrections to “GNN-Based Hardware Trojan Detection at Register Transfer Level Leveraging Multiple-Category Features”).
- 24 January 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Very Large Scale Integration (VLSI) Systems
- Vol. 33 (3) , 902
Corrections to “GNN-Based Hardware Trojan Detection at Register Transfer Level Leveraging Multiple-Category Features”
Presents corrections to the paper, (Corrections to “GNN-Based Hardware Trojan Detection at Register Transfer Level Leveraging Multiple-Category Features”).
- 23 January 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Computers
- Vol. 74 (5) , 1470-1481
Hardware Trojan Detection Methods for Gate-Level Netlists Based on Graph Neural Networks
Currently, untrusted third-party entities are increasingly involved in various stages of IC design and manufacturing, posing a significant threat to the reliability and security of SoCs due to the presence of hardware Trojans (HTs). In this paper, gate-level HT detection methods based on graph neural networks( GNNs) are established to overcome the defects of existing machine learning, which makes it difficult to characterize circuit connection relationships. We introduce harmonic centrality in the feature engineering of gate-level HT detection, which reflects the positional information of nodes and their adjacent nodes in the graph, thereby enhancing the quality of feature engineering. We use the golden section weight optimization algorithm to configure penalty weights to alleviate the problem of extreme data imbalance. In the SAED database, GraphSAGE-LSTM model obtained a TPR of 88.06% and an average F1 score of 90.95%. In the combined HT netlist of LEDA datasets, GraphSAGE-POOL model obtains a TPR of 88.50% and the best F1 score of 92.17%. In sequential HT netlist, GraphSAGE-LSTM model performs optimally, with a TPR of 98.25% and an average F1 score of 98.59%. Compared to existing detection models, the F1 score is enhanced by 8.86% and 2.48% on combined and sequential HT datasets, respectively.
- 23 January 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Computers
- Vol. 74 (5) , 1470-1481
Hardware Trojan Detection Methods for Gate-Level Netlists Based on Graph Neural Networks
Currently, untrusted third-party entities are increasingly involved in various stages of IC design and manufacturing, posing a significant threat to the reliability and security of SoCs due to the presence of hardware Trojans (HTs). In this paper, gate-level HT detection methods based on graph neural networks( GNNs) are established to overcome the defects of existing machine learning, which makes it difficult to characterize circuit connection relationships. We introduce harmonic centrality in the feature engineering of gate-level HT detection, which reflects the positional information of nodes and their adjacent nodes in the graph, thereby enhancing the quality of feature engineering. We use the golden section weight optimization algorithm to configure penalty weights to alleviate the problem of extreme data imbalance. In the SAED database, GraphSAGE-LSTM model obtained a TPR of 88.06% and an average F1 score of 90.95%. In the combined HT netlist of LEDA datasets, GraphSAGE-POOL model obtains a TPR of 88.50% and the best F1 score of 92.17%. In sequential HT netlist, GraphSAGE-LSTM model performs optimally, with a TPR of 98.25% and an average F1 score of 98.59%. Compared to existing detection models, the F1 score is enhanced by 8.86% and 2.48% on combined and sequential HT datasets, respectively.
- 13 December 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Very Large Scale Integration (VLSI) Systems
- Vol. 33 (3) , 831-840
GNN-Based Hardware Trojan Detection at Register Transfer Level Leveraging Multiple-Category Features
The existing hardware Trojan (HT) detection technology usually relies on the golden reference model. With the continuous improvement of circuit integration, the detection accuracy of traditional methods such as side-channel analysis has declined. Methods based on testability and switch probability analysis have shown high detection accuracy. However, these techniques have a limited detection scope and are generally ineffective at identifying HT where the Sandia controllability/observability analysis program (SCOAP) values or switch probabilities are similar to those of normal signals. Against this backdrop, this article proposes a detection method based on graph neural networks (GNNs), which can achieve HT detection at the register transfer level (RTL) without the golden reference model. First, the RTL code is transformed into a data flow graph (DFG), and node feature extraction and node label marking are carried out during the transformation process. To mitigate the impact of insufficient initial features on the GNN model performance, the node feature vector used in this article comprises 37-D node types and 6-D structural features such as the minimum distance from the primary input (PI) and primary output (PO), in-degree, and out-degree. Subsequently, several GNN models are built for node classification tasks. The best model achieves an average of 99.1% recall and 96.7% F 1-score on the open-source dataset on the Trust-Hub platform. Compared to the state-of-the-art detection results at RTL, the F 1-score in this article has increased by an average of 3.8%.
- 13 December 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Very Large Scale Integration (VLSI) Systems
- Vol. 33 (3) , 831-840
GNN-Based Hardware Trojan Detection at Register Transfer Level Leveraging Multiple-Category Features
The existing hardware Trojan (HT) detection technology usually relies on the golden reference model. With the continuous improvement of circuit integration, the detection accuracy of traditional methods such as side-channel analysis has declined. Methods based on testability and switch probability analysis have shown high detection accuracy. However, these techniques have a limited detection scope and are generally ineffective at identifying HT where the Sandia controllability/observability analysis program (SCOAP) values or switch probabilities are similar to those of normal signals. Against this backdrop, this article proposes a detection method based on graph neural networks (GNNs), which can achieve HT detection at the register transfer level (RTL) without the golden reference model. First, the RTL code is transformed into a data flow graph (DFG), and node feature extraction and node label marking are carried out during the transformation process. To mitigate the impact of insufficient initial features on the GNN model performance, the node feature vector used in this article comprises 37-D node types and 6-D structural features such as the minimum distance from the primary input (PI) and primary output (PO), in-degree, and out-degree. Subsequently, several GNN models are built for node classification tasks. The best model achieves an average of 99.1% recall and 96.7% F 1-score on the open-source dataset on the Trust-Hub platform. Compared to the state-of-the-art detection results at RTL, the F 1-score in this article has increased by an average of 3.8%.
- Top Cited Papers
- 16 March 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Electron Device Letters
- Vol. 43 (5) , 765-768
6 kV/3.4 mΩ·cm2 Vertical β-Ga2O3 Schottky Barrier Diode With BV2/Ron,sp Performance Exceeding 1-D Unipolar Limit of GaN and SiC
In this work, we show that the$\beta $ -Ga 2 O 3 Schottky Barrier Diode (SBD) can perform beyond the 1-D unipolar limit of the SiC and GaN by employing a deep trench with filled thick SiO 2 layer structure to enhance the breakdown voltage (BV). By doing so, BV and specific on- resistance ($\text{R}_{\text {on},\text {sp}}$ ) of 5–6 kV and 3.4$\text{m}\boldsymbol {\Omega } \cdot \text {cm}^{{2}}$ are simultaneously derived on the SBDs with$\beta $ -Ga 2 O 3 epi-layer thickness of 10$\boldsymbol {\mu } \text{m}$ and diode radius of 90$\boldsymbol {\mu }\text{m}$ . Therefore, the Baliga’s power figure of merit (P-FOM = BV$^{{2}} /\text{R}_{\text {on,sp}}$ ) is yielded to be 7.4-10.6 GW$/$ cm 2 . To the best of all authors’ knowledge, those P-FOMs are the highest values among all types of SBDs, which is a significant step towards the Ga 2 O 3 SBD performance improvement. Combined with negligible forward hysteresis and low reverse leakage current, vertical$\beta $ -Ga 2 O 3 SBDs with state-of-the-art BV and P-FOM show its great promise for next generation high voltage and high power applications.- 16 March 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Electron Device Letters
- Vol. 43 (5) , 765-768
Top Cited Papers6 kV/3.4 mΩ·cm2 Vertical β-Ga2O3 Schottky Barrier Diode With BV2/Ron,sp Performance Exceeding 1-D Unipolar Limit of GaN and SiC
In this work, we show that the$\beta $ -Ga 2 O 3 Schottky Barrier Diode (SBD) can perform beyond the 1-D unipolar limit of the SiC and GaN by employing a deep trench with filled thick SiO 2 layer structure to enhance the breakdown voltage (BV). By doing so, BV and specific on- resistance ($\text{R}_{\text {on},\text {sp}}$ ) of 5–6 kV and 3.4$\text{m}\boldsymbol {\Omega } \cdot \text {cm}^{{2}}$ are simultaneously derived on the SBDs with$\beta $ -Ga 2 O 3 epi-layer thickness of 10$\boldsymbol {\mu } \text{m}$ and diode radius of 90$\boldsymbol {\mu }\text{m}$ . Therefore, the Baliga’s power figure of merit (P-FOM = BV$^{{2}} /\text{R}_{\text {on,sp}}$ ) is yielded to be 7.4-10.6 GW$/$ cm 2 . To the best of all authors’ knowledge, those P-FOMs are the highest values among all types of SBDs, which is a significant step towards the Ga 2 O 3 SBD performance improvement. Combined with negligible forward hysteresis and low reverse leakage current, vertical$\beta $ -Ga 2 O 3 SBDs with state-of-the-art BV and P-FOM show its great promise for next generation high voltage and high power applications. - 14 September 2021
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Nuclear Science
- Vol. 68 (11) , 2616-2623
Combined Effects of Proton Irradiation and Forward Gate-Bias Stress on the Interface Traps in AlGaN/GaN Heterostructure
The combined effects of proton irradiation and forward gate-bias stress on the interface traps of AlGaN/GaN heterostructure have been studied in this article. It is found that the effect of proton irradiation and forward gate-bias on the shift of flat band voltage $V_{\mathrm {FB}}$ is independent. By utilizing the frequency-dependent conductance technique, it is found that the trap density $D_{\mathrm {T}}$ at metal/AlGaN interface decreases after proton irradiation and the $D_{\mathrm {T}}$ at most energy levels increases after the following forward gate-bias. The $D_{\mathrm {T}}$ at AlGaN/GaN interface increases after proton irradiation and then decreases after the following forward gate-bias. The energy level range of metal/AlGaN interface traps reduces significantly under the forward gate-bias for the irradiated devices, however, that of AlGaN/GaN interface traps decreases little. In summary, the combined effect of proton irradiation and forward gate-bias stress on the interface traps is more complex than that on the bulk traps in AlGaN layer.
- 14 September 2021
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Nuclear Science
- Vol. 68 (11) , 2616-2623
Combined Effects of Proton Irradiation and Forward Gate-Bias Stress on the Interface Traps in AlGaN/GaN Heterostructure
The combined effects of proton irradiation and forward gate-bias stress on the interface traps of AlGaN/GaN heterostructure have been studied in this article. It is found that the effect of proton irradiation and forward gate-bias on the shift of flat band voltage $V_{\mathrm {FB}}$ is independent. By utilizing the frequency-dependent conductance technique, it is found that the trap density $D_{\mathrm {T}}$ at metal/AlGaN interface decreases after proton irradiation and the $D_{\mathrm {T}}$ at most energy levels increases after the following forward gate-bias. The $D_{\mathrm {T}}$ at AlGaN/GaN interface increases after proton irradiation and then decreases after the following forward gate-bias. The energy level range of metal/AlGaN interface traps reduces significantly under the forward gate-bias for the irradiated devices, however, that of AlGaN/GaN interface traps decreases little. In summary, the combined effect of proton irradiation and forward gate-bias stress on the interface traps is more complex than that on the bulk traps in AlGaN layer.
- 15 December 2020
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Circuits and Systems II: Express Briefs
- Vol. 68 (6) , 2152-2156
Hardware Trojan Designs Based on High-Low Probability and Partitioned Combinational Logic With a Malicious Reset Signal
To counteract logic-testing methods and trust verification methods for hardware Trojan (HT) detection, two HT design strategies based on high-low probability and partitioned combinational logic with a malicious reset signal are proposed. Using these two strategies, a power consumption HT and a forced reset HT are designed in a self-developed RISC-V processor. The processor is implemented using SMIC 55nm CMOS technology. Experiments show that, compared to the HTs designed with low-probability nets, the HTs designed with high-low probability strategy can reduce the triggering probability by 87.5%. The HT designed by partitioning combinational logic strategy can increase the false positive rate of HT to 40%. The result can defeat FANCI effectively. In order to enhance the stealth of the HTs, we partitioned combinational logic by using flip-flops with a malicious reset signal. The reset signal participates as a part of the trigger condition, which significantly reduces the trigger probability of HTs.
- 15 December 2020
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Circuits and Systems II: Express Briefs
- Vol. 68 (6) , 2152-2156
Hardware Trojan Designs Based on High-Low Probability and Partitioned Combinational Logic With a Malicious Reset Signal
To counteract logic-testing methods and trust verification methods for hardware Trojan (HT) detection, two HT design strategies based on high-low probability and partitioned combinational logic with a malicious reset signal are proposed. Using these two strategies, a power consumption HT and a forced reset HT are designed in a self-developed RISC-V processor. The processor is implemented using SMIC 55nm CMOS technology. Experiments show that, compared to the HTs designed with low-probability nets, the HTs designed with high-low probability strategy can reduce the triggering probability by 87.5%. The HT designed by partitioning combinational logic strategy can increase the false positive rate of HT to 40%. The result can defeat FANCI effectively. In order to enhance the stealth of the HTs, we partitioned combinational logic by using flip-flops with a malicious reset signal. The reset signal participates as a part of the trigger condition, which significantly reduces the trigger probability of HTs.
- 4 October 2018
- Published by Wiley in Physica Status Solidi (a)
- Vol. 215 (23)
Effect of Inductively Couple Plasma‐Based Oxygen Plasma Treatment on AlGaN/GaN HEMT
In this paper, the physical mechanism and trap effect of AlGaN/GaN high electron mobility transistor HEMT with inductively couple plasma (ICP) based oxygen plasma treatment are investigated. Three devices with different oxygen plasma treatment conditions are fabricated and compared to a conventional device. To understand the physical mechanism of oxygen plasma treatment by ICP, the chemical composition change of the barrier layer is studied through X‐ray photoelectron spectroscopy (XPS) and transmission electron microscope (TEM), and the Al molar composition changes of the barrier layer after oxygen plasma treatment are numerically calculated. By numerical calculation of the polarization effect, it is found that an increase in time and RF power of the ICP increase the oxidation effect while the etching effect is decreased. Meanwhile, the trap effect of the devices that has treated with oxygen plasma treatment is also studied. In this study, the authors found that the greater the RF power is, the great the number of deep‐level trap states introduced by oxygen plasma treatment. However, the effect of oxygen plasma treatment on trap states is relatively limited, indicating that the trap density introduced by the ICP‐based oxygen plasma treatment is low.
- 4 October 2018
- Published by Wiley in Physica Status Solidi (a)
- Vol. 215 (23)
Effect of Inductively Couple Plasma‐Based Oxygen Plasma Treatment on AlGaN/GaN HEMT
In this paper, the physical mechanism and trap effect of AlGaN/GaN high electron mobility transistor HEMT with inductively couple plasma (ICP) based oxygen plasma treatment are investigated. Three devices with different oxygen plasma treatment conditions are fabricated and compared to a conventional device. To understand the physical mechanism of oxygen plasma treatment by ICP, the chemical composition change of the barrier layer is studied through X‐ray photoelectron spectroscopy (XPS) and transmission electron microscope (TEM), and the Al molar composition changes of the barrier layer after oxygen plasma treatment are numerically calculated. By numerical calculation of the polarization effect, it is found that an increase in time and RF power of the ICP increase the oxidation effect while the etching effect is decreased. Meanwhile, the trap effect of the devices that has treated with oxygen plasma treatment is also studied. In this study, the authors found that the greater the RF power is, the great the number of deep‐level trap states introduced by oxygen plasma treatment. However, the effect of oxygen plasma treatment on trap states is relatively limited, indicating that the trap density introduced by the ICP‐based oxygen plasma treatment is low.
- 1 September 2016
- Published by Elsevier in Solid-State Electronics
- Vol. 123, 96-100
A high efficiency C-band internally-matched harmonic tuning GaN power amplifier
- 1 September 2016
- Published by Elsevier in Solid-State Electronics
- Vol. 123, 96-100
A high efficiency C-band internally-matched harmonic tuning GaN power amplifier