Frances Burrell
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Frances Burrell has a total of 23 co-authors. Here are the top co-authors by number of shared publications:
- Christopher L. Cardwell
National Oceanography Centre, European Way, Southampton SO14 3ZH, UK
2 shared publications Jake Ludgate
2 shared publicationsMatthew C. Mowlem
2 shared publicationsPawel Gaca
2 shared publications- Phillip E. Warwick
University of Southampton
2 shared publications Reuben Forrester
2 shared publications
Latest Publications
- Open Access
- 7 July 2026
- Published by Elsevier in SSRN Electronic Journal
Numerically guided development of a microfluidic lab-on-chip platform for Cherenkov detection of β-emitting radionuclides
Microfluidic lab-on-chip (LoC) systems offer significant potential for in situ radiometric analysis while reducing sample handling and secondary waste generation. However, optimisation of photon transport and optical detection efficiency in radiometric microfluidic systems remains underexplored. Here, finite element ray-tracing modelling was combined with experimental validation to develop and optimise a Cherenkov-based microfluidic detection platform for pure β-emitting radionuclides. Two prototype microfluidic detection units (MDUs) incorporating serpentine channel architectures were designed, fabricated, and integrated with a photomultiplier tube detection system. Numerical modelling was used to evaluate photon transport, reflective geometries, and channel configurations prior to fabrication. Experimental validation was conducted using 90Sr/90Y, 36Cl, and 99Tc to assess analytical response and radionuclide compatibility. Both MDUs demonstrated linear response with increasing activity (R² > 0.91), with minimum detectable activities of 21 Bq and 51 Bq obtained for the single- and dual-channel configurations, respectively. Reflective channel configurations enhanced photon collection efficiency, and strong agreement was observed between modelled and experimental results. This work demonstrates the value of modelling-guided optimisation for the development of radiometric microfluidic analytical platforms and highlights the potential of Cherenkov-based LoC systems for in situ radionuclide detection.
- 7 July 2026
- Published by Elsevier in SSRN Electronic Journal
Open AccessNumerically guided development of a microfluidic lab-on-chip platform for Cherenkov detection of β-emitting radionuclides
Microfluidic lab-on-chip (LoC) systems offer significant potential for in situ radiometric analysis while reducing sample handling and secondary waste generation. However, optimisation of photon transport and optical detection efficiency in radiometric microfluidic systems remains underexplored. Here, finite element ray-tracing modelling was combined with experimental validation to develop and optimise a Cherenkov-based microfluidic detection platform for pure β-emitting radionuclides. Two prototype microfluidic detection units (MDUs) incorporating serpentine channel architectures were designed, fabricated, and integrated with a photomultiplier tube detection system. Numerical modelling was used to evaluate photon transport, reflective geometries, and channel configurations prior to fabrication. Experimental validation was conducted using 90Sr/90Y, 36Cl, and 99Tc to assess analytical response and radionuclide compatibility. Both MDUs demonstrated linear response with increasing activity (R² > 0.91), with minimum detectable activities of 21 Bq and 51 Bq obtained for the single- and dual-channel configurations, respectively. Reflective channel configurations enhanced photon collection efficiency, and strong agreement was observed between modelled and experimental results. This work demonstrates the value of modelling-guided optimisation for the development of radiometric microfluidic analytical platforms and highlights the potential of Cherenkov-based LoC systems for in situ radionuclide detection.
- Open Access
- 6 March 2023
- Published by Royal Society of Chemistry (RSC) in Environmental Science: Advances
- Vol. 2 (4) , 652-662
Electrokinetic generation of iron-rich barriers in soils: realising the potential for nuclear site management and decommissioning
Following earlier field-scale pilot work on nuclear site materials in the late 2000s, there has recently been renewed research and industry interest in the application of electrokinetic technologies for nuclear site management and remediation in the UK. One relatively novel application of electrokinetics is the use of sacrificial steel electrodes (coupled with an in situ generated pH–Eh gradient in the treated material) to precipitate sub-surface iron-rich barriers for groundwater and/or leachate containment, which could be used to grout or contain contaminated fluids in the sub-surface on working nuclear sites or sites undergoing decommissioning. Here, we report previously unpublished data from two work programmes exploring the higher Technology Readiness Level (TRL) application of this electrokinetic iron-barrier approach to materials typical of those found in the subsurface of the Sellafield nuclear licensed site, UK. The first programme, funded by the UK National Nuclear Laboratory (NNL), assessed the electrokinetic generation of iron-rich barriers at metre + scale in simulated Sellafield materials, while the second programme, funded under the current UK TRANSCEND consortium project, examined electrokinetic iron-barrier formation at smaller (−1) with energy and consumables costs of no more than single-digit or tens of US dollars at the metre-plus scale. Further work is needed however to assess the longevity of the iron precipitates forming the subsurface barrier, and to explore barrier generation at the geometries and scales required for (site specific) field application.
- 6 March 2023
- Published by Royal Society of Chemistry (RSC) in Environmental Science: Advances
- Vol. 2 (4) , 652-662
Open AccessElectrokinetic generation of iron-rich barriers in soils: realising the potential for nuclear site management and decommissioning
Following earlier field-scale pilot work on nuclear site materials in the late 2000s, there has recently been renewed research and industry interest in the application of electrokinetic technologies for nuclear site management and remediation in the UK. One relatively novel application of electrokinetics is the use of sacrificial steel electrodes (coupled with an in situ generated pH–Eh gradient in the treated material) to precipitate sub-surface iron-rich barriers for groundwater and/or leachate containment, which could be used to grout or contain contaminated fluids in the sub-surface on working nuclear sites or sites undergoing decommissioning. Here, we report previously unpublished data from two work programmes exploring the higher Technology Readiness Level (TRL) application of this electrokinetic iron-barrier approach to materials typical of those found in the subsurface of the Sellafield nuclear licensed site, UK. The first programme, funded by the UK National Nuclear Laboratory (NNL), assessed the electrokinetic generation of iron-rich barriers at metre + scale in simulated Sellafield materials, while the second programme, funded under the current UK TRANSCEND consortium project, examined electrokinetic iron-barrier formation at smaller (−1) with energy and consumables costs of no more than single-digit or tens of US dollars at the metre-plus scale. Further work is needed however to assess the longevity of the iron precipitates forming the subsurface barrier, and to explore barrier generation at the geometries and scales required for (site specific) field application.
- 1 January 2022
- Published by Elsevier in Applied Radiation and Isotopes
- Vol. 179, 109995
A compact, dual-zone vertical tube furnace for the determination of tritium and carbon-14 in decommissioning wastes
- 1 January 2022
- Published by Elsevier in Applied Radiation and Isotopes
- Vol. 179, 109995
A compact, dual-zone vertical tube furnace for the determination of tritium and carbon-14 in decommissioning wastes
- Open Access
- 25 May 2021
- Published by Royal Society of Chemistry (RSC) in The Analyst
- Vol. 146 (12) , 4049-4065
Development of a numerical simulation method for modelling column breakthrough from extraction chromatography resins
A numerical simulation method was developed in LabVIEW using rate constants derived from batch experiments. The successful application to chromatographic breakthrough demonstrates potential for integration with automated radioanalytical systems.
- 25 May 2021
- Published by Royal Society of Chemistry (RSC) in The Analyst
- Vol. 146 (12) , 4049-4065
Open AccessDevelopment of a numerical simulation method for modelling column breakthrough from extraction chromatography resins
A numerical simulation method was developed in LabVIEW using rate constants derived from batch experiments. The successful application to chromatographic breakthrough demonstrates potential for integration with automated radioanalytical systems.