Sandisiwe Khanyisa Thisani
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Sandisiwe Khanyisa Thisani has a total of 2 co-authors. Here are the top co-authors by number of shared publications:
- Daramy Vandi Von Kallon
University of Johannesburg
4 shared publications - Patrick Byrne
Liverpool John Moores University Liverpool UK
4 shared publications
Latest Publications
- Open Access
Co-Remediation of Acid Mine Drainage and Industrial Effluent Using Passive Permeable Reactive Barrier Pre-Treatment and Active Co-Bioremediation
This study evaluated the co-remediation performance of an active–passive process comprised of passive permeable reactive barrier acid mine drainage (AMD) pre-treatment and active anaerobic digestion treatment of AMD with effluent as a carbon source. The bioreactor was operated for 24 consecutive days with peak chemical oxygen demand (COD) and sulphate loading rates of 6.6 kg COD/m3/day and 0.89 kg SO42−/m3/day, respectively. The AMD pre-treatment was capable of removing 99%, 94% and 42% of iron (Fe), potassium (K), and aluminium (Al) concentrations, respectively. The biological treatment process was capable of removing 89.7% and 99% of COD and sulphate concentrations, respectively. The treated wastewater copper (Cu), sulphate (SO42−), and pH were within the effluent discharge limits and the potable water standards of South Africa. Fe, Al, manganese (Mn), nickel (Ni), and zinc (Zn) concentrations in the treated wastewater were marginally higher than the discharge and potable water limit with all concentrations exceeding the limit by less than 0.65 mg/L. The remediation performance of the process was found to be effective with limited operational inputs, which can enable low cost co-remediation.
Open AccessCo-Remediation of Acid Mine Drainage and Industrial Effluent Using Passive Permeable Reactive Barrier Pre-Treatment and Active Co-Bioremediation
This study evaluated the co-remediation performance of an active–passive process comprised of passive permeable reactive barrier acid mine drainage (AMD) pre-treatment and active anaerobic digestion treatment of AMD with effluent as a carbon source. The bioreactor was operated for 24 consecutive days with peak chemical oxygen demand (COD) and sulphate loading rates of 6.6 kg COD/m3/day and 0.89 kg SO42−/m3/day, respectively. The AMD pre-treatment was capable of removing 99%, 94% and 42% of iron (Fe), potassium (K), and aluminium (Al) concentrations, respectively. The biological treatment process was capable of removing 89.7% and 99% of COD and sulphate concentrations, respectively. The treated wastewater copper (Cu), sulphate (SO42−), and pH were within the effluent discharge limits and the potable water standards of South Africa. Fe, Al, manganese (Mn), nickel (Ni), and zinc (Zn) concentrations in the treated wastewater were marginally higher than the discharge and potable water limit with all concentrations exceeding the limit by less than 0.65 mg/L. The remediation performance of the process was found to be effective with limited operational inputs, which can enable low cost co-remediation.
- Open Access
- 29 September 2021
- Published by MDPI AG in Sustainability
- Vol. 13 (19) , 10847
Effects of Contact Time and Flow Configuration on the Acid Mine Drainage Remediation Capabilities of Pervious Concrete
This paper investigates the Acid Mine Drainage (AMD) remediation capabilities of pozzolanic pervious concrete Permeable Reactive Barriers (PRBs) with a specific focus on the effects of flow configuration and contact time on the remediation efficiency. Raw AMD was collected from an abandoned coal mine. Two flow configurations, gravity flow and column flow, were tested at a laboratory scale with gradually increasing contact times. The gravity flow configuration with two orders of magnitude less liquid-concrete contact time achieved AMD treated water quality equivalent to the high retention column flow configuration. Concentrations of iron, aluminium, sulphate, magnesium and sodium were reduced by more than 99%, 80%, 17%, 22% and 20%, respectively, at the tested limits while calcium and potassium concentrations were increased by up to 16% and 300%, respectively. The study findings indicate that the lifecycle costs of pervious concrete PRBs can be significantly reduced when the PRBs are operated under gravity flow.
- 29 September 2021
- Published by MDPI AG in Sustainability
- Vol. 13 (19) , 10847
Open AccessEffects of Contact Time and Flow Configuration on the Acid Mine Drainage Remediation Capabilities of Pervious Concrete
This paper investigates the Acid Mine Drainage (AMD) remediation capabilities of pozzolanic pervious concrete Permeable Reactive Barriers (PRBs) with a specific focus on the effects of flow configuration and contact time on the remediation efficiency. Raw AMD was collected from an abandoned coal mine. Two flow configurations, gravity flow and column flow, were tested at a laboratory scale with gradually increasing contact times. The gravity flow configuration with two orders of magnitude less liquid-concrete contact time achieved AMD treated water quality equivalent to the high retention column flow configuration. Concentrations of iron, aluminium, sulphate, magnesium and sodium were reduced by more than 99%, 80%, 17%, 22% and 20%, respectively, at the tested limits while calcium and potassium concentrations were increased by up to 16% and 300%, respectively. The study findings indicate that the lifecycle costs of pervious concrete PRBs can be significantly reduced when the PRBs are operated under gravity flow.
- Open Access
- 21 July 2021
- Published by MDPI AG in Sustainability
- Vol. 13 (15) , 8118
Review of Remediation Solutions for Acid Mine Drainage Using the Modified Hill Framework
This paper reviews the Acid Mine Drainage (AMD) remediation potential and operational costs of twelve existing AMD remediation methods against Class 0 and Class I AMD geochemical characteristics as defined in the Modified Hill Framework. Of the twelve remediation options reviewed in this study, eleven required additional process steps either for further treatment to achieve the discharge limits or for the safe management of hazardous waste by-products. Chemical desalination showed the greatest potential with high quality treated water and operational costs between USD 0.25 and USD 0.75 per cubic meter treated. The management of the toxic metal and sulphide by-products remains a key challenge that requires further research for sustainable mine water remediation. Further development of end-to-end methods suitable for Class 0 AMD with economical operational costs is recommended in order to effectively address the ongoing environmental challenges posed by AMD globally.
- 21 July 2021
- Published by MDPI AG in Sustainability
- Vol. 13 (15) , 8118
Open AccessReview of Remediation Solutions for Acid Mine Drainage Using the Modified Hill Framework
This paper reviews the Acid Mine Drainage (AMD) remediation potential and operational costs of twelve existing AMD remediation methods against Class 0 and Class I AMD geochemical characteristics as defined in the Modified Hill Framework. Of the twelve remediation options reviewed in this study, eleven required additional process steps either for further treatment to achieve the discharge limits or for the safe management of hazardous waste by-products. Chemical desalination showed the greatest potential with high quality treated water and operational costs between USD 0.25 and USD 0.75 per cubic meter treated. The management of the toxic metal and sulphide by-products remains a key challenge that requires further research for sustainable mine water remediation. Further development of end-to-end methods suitable for Class 0 AMD with economical operational costs is recommended in order to effectively address the ongoing environmental challenges posed by AMD globally.
- Open Access
- 8 June 2021
- Published by MDPI AG in Sustainability
- Vol. 13 (12) , 6529
A Fixed Bed Pervious Concrete Anaerobic Bioreactor for Biological Sulphate Remediation of Acid Mine Drainage Using Simple Organic Matter
The development of low-operational-cost and low-operational-complexity active sulphate (SO4) reducing bioremediation for Acid Mine Drainage (AMD) is an ongoing pursuit towards sustainable mining. This study introduces a fixed bed pervious concrete anaerobic bioreactor as a second stage AMD remediation process. The study investigated the pH self-regulation capabilities, SO4 remediation capabilities and the rate limiting parameters of the bioreactor using glucose as an organic matter source. The AMD was pre-treated using a permeable reactive barrier. A 21-day trial comprised of an increase in the SO4 loading rate while reducing the organic loading rate was undertaken to identify performance limiting conditions. A daily average SO4 concentration reduction rate of 55.2% was achieved over the initial 13 days of the experiments. The study found that a COD to SO4 ratio and VFA to alkalinity ratio below 5:1 and 0.5:1 respectively were performance limiting. The bioreactor was capable of self-regulating pH within the neutral range of 6.5 and 7.5. The study findings indicate that the bioreactor design can reduce operational costs and operational complexity of active AMD bioremediation.
- 8 June 2021
- Published by MDPI AG in Sustainability
- Vol. 13 (12) , 6529
Open AccessA Fixed Bed Pervious Concrete Anaerobic Bioreactor for Biological Sulphate Remediation of Acid Mine Drainage Using Simple Organic Matter
The development of low-operational-cost and low-operational-complexity active sulphate (SO4) reducing bioremediation for Acid Mine Drainage (AMD) is an ongoing pursuit towards sustainable mining. This study introduces a fixed bed pervious concrete anaerobic bioreactor as a second stage AMD remediation process. The study investigated the pH self-regulation capabilities, SO4 remediation capabilities and the rate limiting parameters of the bioreactor using glucose as an organic matter source. The AMD was pre-treated using a permeable reactive barrier. A 21-day trial comprised of an increase in the SO4 loading rate while reducing the organic loading rate was undertaken to identify performance limiting conditions. A daily average SO4 concentration reduction rate of 55.2% was achieved over the initial 13 days of the experiments. The study found that a COD to SO4 ratio and VFA to alkalinity ratio below 5:1 and 0.5:1 respectively were performance limiting. The bioreactor was capable of self-regulating pH within the neutral range of 6.5 and 7.5. The study findings indicate that the bioreactor design can reduce operational costs and operational complexity of active AMD bioremediation.