JMJaime Molins-Benlliure

Jaime Molins-Benlliure

*This is an algorithmically generated author record based on publicly available information.

Jaime Molins-Benlliure has a total of 3 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Miniaturized On-Ground 2.4 GHz IoT LTCC Chip Antenna and Its Positioning on a Ground Plane

    by Jaime Molins-Benlliure, Marta Cabedo-Fabrés, Eva Antonino-Daviu, Miguel Ferrando-Bataller

    This paper presents a very low-profile on-ground chip antenna with a total volume of 0.075λ0× 0.056λ0× 0.019λ0 (at f0 = 2.4 GHz). The proposed design is a corrugated (accordion-like) planar inverted F antenna (PIFA) embedded in low-loss glass ceramic material (DuPont GreenTape 9k7 with ϵr = 7.1 and tanδ = 0.0009) fabricated with LTCC technology. The antenna does not require a clearance area on the ground plane where the antenna is located, and it is proposed for 2.4 GHz IoT applications for extreme size-limited devices. It shows a 25 MHz impedance bandwidth (for S11 < −6 dB), which means a relative bandwidth of 1%). A study in terms of matching and total efficiency is performed for several size ground planes with the antenna installed at different positions. The use of characteristic modes analysis (CMA) and the correlation between modal and total radiated fields is performed to demonstrate the optimum position of the antenna. Results show high-frequency stability and a total efficiency difference of up to 5.3 dB if the antenna is not placed at the optimum position.


  • On-Ground Small LTCC Chip Antenna and its Placement on IoT Devices

    by Jaime Molins-Benlliure, Eva Antonino-Daviul, Marta Cabedo-Fabrés, Miguel Ferrando-Bataller

    A low-profile on-ground chip antenna is presented to be installed in size-limited devices for 868 MHz IoT applications. The antenna presents a size of 0.064 $\times 0.045\times 0.007\lambda _{0}^{3}$ , has been fabricated in low-temperature cofired ceramic (LTCC) technology and is meant to be placed on a ground plane without a clearance area required. A study regarding matching and total efficiency is performed by analyzing the antenna in different positions of a variable-size ground plane with the use of characteristic modes analysis (CMA) and the correlation between modal and total radiated fields. The analysis demonstrates through the correlation which are the excited modes of the ground plane and, consequently, which is the best position for the antenna. Results show frequency stability and a total efficiency difference of up to 8.8 dB between different positions.


  • Open Access

    Sector Unit-Cell Methodology for the Design of Sub-6 GHz 5G MIMO Antennas

    by Jaime Molins-Benlliure, Marta Cabedo-Fabres, Eva Antonino-Daviu, Miguel Ferrando-Bataller

    A novel methodology based on the sectorization of multiple-port cavities with azimuthal symmetry into sector unit cells is presented to design 5G multiple-input multiple-output (MIMO) sub-6 GHz antennas. The methodology divides an N-port cavity antenna into N unit cells and predicts the performance of the N-port design with the analysis of two adjacent cells. This approximation reduces the time and complexity of the simulation of cavity antennas with a high number of ports. For the theoretical justification, cavity mode analysis of a closed cavity and characteristic modes analysis of open and sector cavities is addressed. With the use of the proposed methodology, five different cavity designs with circular, square, hexagonal, octagonal, and saw-tooth geometries are presented in this article. In addition, the fabrication of the 4-port circular shape design and its MIMO performance is also studied. Results show an impedance bandwidth of 130% (1.27-6 GHz), and an envelope correlation coefficient (ECC) lower than 0.1.


  • Open Access

    Four-Port Wide-Band Cavity-Backed Antenna With Isolating X-Shaped Block for Sub-6 GHz 5G Indoor Base Stations

    by Jaime Molins-Benlliure, Eva Antonino-Daviu, Marta Cabedo-Fabres, Miguel Ferrando-Bataller

    A four-port wideband cavity-backed antenna is presented for indoor base stations applications. The antenna is composed of a square open cavity with an X-shaped isolating block and 4 feeding monopoles symmetrically and orthogonally arranged in the aperture of the cavity. A novel methodology based on Characteristic Modes Analysis (CMA) is used for identifying the modes which are contributing to the coupling. As a result of this analysis, an X-shaped isolating block placed at the center of the cavity is proposed for increasing the isolation between ports. A wide-band four-port antenna with unidirectional radiation patterns is obtained with a measured impedance bandwidth ( S 11 <; -10 dB) ranging from 1.55 to 6 GHz (118%), covering most of the sub-6 GHz 5G bands. The proposed antenna provides four independent radiation patterns, with 16 dB of measured minimum isolation between ports and an efficiency higher than 84%. Multiple-input multiple-output (MIMO) compatibility is confirmed with a 4×4 MIMO simulated system with an envelope correlation coefficient (ECC)<; 0.5 in different propagation conditions. The antenna is easy to fabricate and presents a compact size of 129.5×129.5 ×28.2 mm 3 ( 0.68λ×0.68λ×0.15λ, at a frequency f = f min = 1.55 GHz). Moreover, the antenna has the advantage of avoiding complex feeding structures with baluns or directional couplers.