Maura Fugazzotto

An archaeological project requires a complex heritage management approach that includes excavation, scientific research, conservation of unearthed objects, protection of the site’s architecture, and, finally, public engagement. Based on these premises, the Baghdad Urban Archaeological Project aims to create a model for Ancient Heritage Management that includes the research, conservation, and public outreach at the Old Babylonian site of Tell Muhammad, located in the southern suburbs of Baghdad (Iraq). In so doing, thanks to the recovery at the site during the mid-19th century of objects with inscriptions related to Hammurabi (1810–1750 BCE), the sixth king of the First Dynasty of Babylon, the project attempts to conserve and promote this fundamental period in the history of ancient Mesopotamia by applying a sustainable model of management of archaeological heritage.

The Monastery of San Nicolò l’Arena in Catania, a UNESCO World Heritage site, embodies a complex architectural and historical stratigraphy, reflecting successive construction phases, functional changes, and the impact of catastrophic events, including the 1669 lava flow and the 1693 earthquake. As part of the CHANGES project, this study combines historical–archaeological research with non-invasive in situ scientific analyses to investigate the materials and the conservation state of the monumental complex. Stratigraphic analysis identified multiple masonry and plaster units, allowing the reconstruction of five main construction phases and related functional changes. Portable X-ray Fluorescence (pXRF), Diffuse Reflectance Infrared Fourier Transform Spectroscopy (DRIFT), and handheld optical microscopy provided rapid insights into the chemical and mineralogical composition of plasters and mortars, highlighting lime-based binders with variable aggregate, including volcanic clasts, sand, and cocciopesto. In situ diagnostic analyses allowed us to distinguish pre- and post-earthquake materials, while historical data contextualized construction phases and functional transformations. The integration of archaeological and scientific approaches proved to be complementary: historical evidence guides the selection of analytical targets, while diagnostic results enrich and validate the interpretation of the building’s evolution. This interdisciplinary methodology establishes a robust framework for the understanding and valorization of complex cultural heritage sites.

A group of richly decorated devotional jewelry from Sicily (18 ^th –19 ^th centuries) has been studied noninvasively by portable Raman spectroscopy, with the aim of identifying the gemstones that embellish these ex‐voto. Different levels of richness were observed in the various objects, from those displaying rubies and diamonds to those decorated with garnets and quartz. Thanks to the high number of garnets found, a focus could be carried out on this mineral, proposing two methods for the treatment of the Raman spectra, involving also a group of reference garnets. On one hand, a development of the software MIRAGEM, called MIRAGEM+, was tested to establish the composition of the garnets. On the other hand, Principal Component Analysis (PCA) was applied to the whole complex of spectra to check the possibility of distinguishing groups of garnets with different compositions. The combination of the results obtained with the two methods demonstrated that both, coupled to Raman spectroscopy, are reliable tools for the noninvasive characterization of garnets and can be used with a longer pretreatment when few samples are involved (MIRAGEM+) or with a shorter preparation for a higher number of spectra (PCA).

This work involved the use of neutron imaging for the study of the mechanism and rate of capillary water uptake within alkali-activated materials (geopolymers) synthesized starting from natural and industrial waste precursors of the Sicilian territory, to be applied to the conservation of cultural heritage. In detail, the materials were produced starting from Mt. Etna Volcanic ash, basalt cutting sludges and industrial ceramic tiles wastes; the starting formulations were also enriched with different types of additives (calcium-rich or reinforcing fibres); furthermore, all the samples were investigated both as such and after preliminary weathering treatment inducing sodium chloride crystallization. The aqueous solutions transfer capability of the products was investigated, with important implications in the possible formation of efflorescence. This is vital when prospecting a conservation intervention and evaluating the suitability of the materials for this scope. The study during water uptake was conducted by means of neutron radiography continuously acquiring images integrated on 10 s, while the wet samples of the ceramic-based geopolymers group were studied also by means of neutron tomography with the aim of observing the porous structures/the formed fractures in 3 dimensions. The data were treated and the sorptivity of the materials was obtained, giving some indications about the advisable formulations (e.g. with calcium-based additive) and those to be avoided for cultural heritage conservation (e.g. ceramic-based without additive).

The recent upgrading of synchrotron radiation (SR) sources has favored, in the last few years, the construction and design of beamlines optimized for the study of cultural heritage materials, which may require ad hoc setups, specific spatial resolutions, and detection limits. In the field of cultural heritage, integrated approaches combining different techniques are often required, even at large facilities, where some beamlines offer the possibility of performing different types of measurements at the same point of analysis, complementing preliminary information usually obtained by conventional laboratory and/or portable in situ methods. An overview of the last ten years of synchrotron applications for the study of pigments is given, with discussion of upstream and downstream challenges to methods and techniques. The possibilities offered by the synchrotron techniques are illustrated by a case study of a particular class of painted ceramics, as an example of different research questions that are solved by a combination of SR-based methods.

This paper aimed to investigate the possibility of using alkaline-based binders made from the industrial waste produced by ceramic tiles in the field of conservation and the restoration of monuments and archaeological heritage. Geopolymer mortars, which are environmentally sustainable products obtained by chemical consolidation at room temperature, are studied for their versatility in applications as reintegration or bedding mortars and pre-cast elements, namely bricks, tiles or missing parts for archaeological pottery, as an alternative to traditional not sustainable products. Starting from a well-established formulation, the function of the product, meaning its technical characteristics and its workability, was optimized by changing the aggregates used, by adding a Ca-rich compound or by changing the liquid/solid ratio with the use of tap water. The possibility of tailoring the finishing of the obtained products was also evaluated. X-ray diffraction analysis showed the influence of adding the additive with the presence of newly formed phases, which positively affect the product’s workability. On the contrary, no important variations were observed with the increase in the water content of the same formulation, opening up the possibility of managing it according to the required fluidity of the final product. Good results were observed, jumping above the laboratory scale and overcoming criticalities linked to the variabilities on site and the higher volume of materials used for industrial processes. The present research also demonstrates that ceramic-based geopolymers are suitable for application in a large variety of cultural heritage projects and with different purposes. Therefore, the paper encourages the use of alkali-activated mortars for green restoration, specifically given the wide range of ceramic materials.

Today, the need to dispose of a huge amount of ceramic industrial waste represents an important problem for production plants. Contextually, it is increasingly difficult to retrieve new mineral resources for the realization of building materials. Reusing ceramic industrial waste as precursors for building blocks/binders, exploiting their aluminosilicate composition for an alkaline activation process, could solve the problem. This chemical process facilitates the consolidation of new binders/blocks without thermal treatments and with less CO₂ emissions if compared with traditional cements/ceramics. The alkali-activated materials (AAMs) are today thought as the materials of the future, eco-sustainable and technically advanced. In this study, six different kind of industrial ceramic waste are compared in their chemical and mineralogical composition, together with their thermal behaviour, reactivity in an alkaline environment and surface area characteristics, with the aim of converting them from waste into new resources. Preliminary tests of AAM synthesis by using 80%–100% of ceramic waste as a precursor show promising results. Workability, porosity and mechanical strengths in particular are measured, showing as, notwithstanding the presence of carbonate components, consolidated materials are obtained, with similar results. The main factors which affect the characteristics of the synthetized AAMs are the precursors’ granulometry, curing temperature and the proportions of the activating solutions.