Ambarish Maji
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Ambarish Maji has a total of 14 co-authors. Here are the top co-authors by number of shared publications:
- Dipankar Bhanja
Department of Mechanical Engineering, National Institute of Technology Silchar, Silchar, India
5 shared publications Gautam Choubey
5 shared publicationsPromod Kumar Patowari
National Institute of Technology Silchar, Silchar 788 010, India
4 shared publications- Tuhin Deshamukhya
Department of Mechanical Engineering, National Institute of Technology Silchar, Assam, India, Pin: 788010
3 shared publications - Krishna Murari Pandey
NIT Silchar
2 shared publications Ajoy Debbarma
1 shared publication
Latest Publications
- Open Access
- 1 June 2025
- Published by KEAI Publishing in Energy Storage and Saving
- Vol. 4 (2) , 123-132
A brief review on analysis and recent development of parabolic trough collector
- 1 June 2025
- Published by KEAI Publishing in Energy Storage and Saving
- Vol. 4 (2) , 123-132
Open AccessA brief review on analysis and recent development of parabolic trough collector
- 10 August 2023
- Published by Elsevier in Engineering Analysis with Boundary Elements
- Vol. 156, 78-89
Numerical investigation and optimisation of flat plate solar collectors using two swarm-based metaheuristic algorithms
- 10 August 2023
- Published by Elsevier in Engineering Analysis with Boundary Elements
- Vol. 156, 78-89
Numerical investigation and optimisation of flat plate solar collectors using two swarm-based metaheuristic algorithms
- 1 July 2019
- Published by American Institute of Aeronautics and Astronautics (AIAA) in Journal of Thermophysics and Heat Transfer
- Vol. 33 (3) , 580-598
Effect of Knurled Fin Surface on Thermal Performance of Perforated Fin Heat Sink
Fabricating perforations in fins causes improvement in heat dissipation rate with lower pressure drag up to a specific perforation number and size of perforation. Again knurled surfaces augment heat transfer rate due to turbulence promotion as well as substantial increase in surface area. The present work investigates thermal performance of heat sink using perforated pin fins with different knurled surfaces. Three-dimensional computational fluid dynamics simulations have been performed to explore the effects of various different knurling geometries on fin surface, perforation number, and size on system performance. A multicriteria decision-making optimization method such as Multi-Objective Optimization under Ratio Analysis (MOORA) has been applied to select the best heat sink configuration. It has been observed that the rate of heat transfer for perforated fins up to a particular perforated area is always greater than the solid fins, and with the variation in knurling geometry on fin surface, heat dissipation rate enhances significantly. Conversely, pressure drop around heat sink decreases with the increment of number and size of perforations. However, due to knurling on fin surface, pressure drop increases. Finally, exergy analysis has also been carried out to calculate second law efficiencies of circular perforated fins using different knurling patterns with increasing number of knurling teeth.
- 1 July 2019
- Published by American Institute of Aeronautics and Astronautics (AIAA) in Journal of Thermophysics and Heat Transfer
- Vol. 33 (3) , 580-598
Effect of Knurled Fin Surface on Thermal Performance of Perforated Fin Heat Sink
Fabricating perforations in fins causes improvement in heat dissipation rate with lower pressure drag up to a specific perforation number and size of perforation. Again knurled surfaces augment heat transfer rate due to turbulence promotion as well as substantial increase in surface area. The present work investigates thermal performance of heat sink using perforated pin fins with different knurled surfaces. Three-dimensional computational fluid dynamics simulations have been performed to explore the effects of various different knurling geometries on fin surface, perforation number, and size on system performance. A multicriteria decision-making optimization method such as Multi-Objective Optimization under Ratio Analysis (MOORA) has been applied to select the best heat sink configuration. It has been observed that the rate of heat transfer for perforated fins up to a particular perforated area is always greater than the solid fins, and with the variation in knurling geometry on fin surface, heat dissipation rate enhances significantly. Conversely, pressure drop around heat sink decreases with the increment of number and size of perforations. However, due to knurling on fin surface, pressure drop increases. Finally, exergy analysis has also been carried out to calculate second law efficiencies of circular perforated fins using different knurling patterns with increasing number of knurling teeth.
- 8 February 2018
- Published by Taylor & Francis in Heat Transfer Engineering
- Vol. 40 (3-4) , 295-319
Thermal Analysis for Heat Transfer Enhancement in Perforated Pin Fins of Various Shapes with Staggered Arrays
The present work investigates the enhancement of heat transfer rate through staggered pin fins of different shapes with different perforation geometries, namely circular, diamond shaped and elliptical type. Three dimensional computational fluid dynamics simulation has been carried out to analyze the effects of fin geometry and dimension of perforation as well as the shape of fin to enhance heat transfer rate against pressure loss. Results show that the heat transfer rates of perforated fins up to certain perforation number and size are always greater than the solid ones and with the change of fin shape and perforation geometry heat transfer rate also improves significantly. On the other hand pressure drop through heat sink decreases not only with increasing perforation number but also with the size of perforation. Moreover, variation of pressure drop of perforated fins is influenced with fin geometry.
- 8 February 2018
- Published by Taylor & Francis in Heat Transfer Engineering
- Vol. 40 (3-4) , 295-319
Thermal Analysis for Heat Transfer Enhancement in Perforated Pin Fins of Various Shapes with Staggered Arrays
The present work investigates the enhancement of heat transfer rate through staggered pin fins of different shapes with different perforation geometries, namely circular, diamond shaped and elliptical type. Three dimensional computational fluid dynamics simulation has been carried out to analyze the effects of fin geometry and dimension of perforation as well as the shape of fin to enhance heat transfer rate against pressure loss. Results show that the heat transfer rates of perforated fins up to certain perforation number and size are always greater than the solid ones and with the change of fin shape and perforation geometry heat transfer rate also improves significantly. On the other hand pressure drop through heat sink decreases not only with increasing perforation number but also with the size of perforation. Moreover, variation of pressure drop of perforated fins is influenced with fin geometry.
- 1 January 2018
- Published by Elsevier in Materials Today: Proceedings
- Vol. 5 (2) , 7457-7465
Microstructure and Mechanical Properties of Alumina Toughened Zirconia (ATZ)
- 1 January 2018
- Published by Elsevier in Materials Today: Proceedings
- Vol. 5 (2) , 7457-7465
Microstructure and Mechanical Properties of Alumina Toughened Zirconia (ATZ)
- 1 October 2017
- Published by Elsevier in Applied Thermal Engineering
- Vol. 125, 596-616
Numerical investigation on heat transfer enhancement of heat sink using perforated pin fins with inline and staggered arrangement
- 1 October 2017
- Published by Elsevier in Applied Thermal Engineering
- Vol. 125, 596-616
Numerical investigation on heat transfer enhancement of heat sink using perforated pin fins with inline and staggered arrangement
- 1 January 2017
- Published by AIP Publishing
Analytical study of temperature distribution in a rectangular porous fin considering both insulated and convective tip
The following study is concerned with determination of temperature distribution of porous fins under convective and insulated tip conditions. The authors have made an effort to study the effect of various important parameters involved in the transfer of heat through porous fins as well as the temperature distribution along the fin length subjected to both convective as well as insulated ends. The non-linear equation obtained has been solved by Adomian Decomposition method and validated with a numerical scheme called Finite Difference method by using a central difference scheme and Gauss Siedel Iterative method.
- 1 January 2017
- Published by AIP Publishing
Analytical study of temperature distribution in a rectangular porous fin considering both insulated and convective tip
The following study is concerned with determination of temperature distribution of porous fins under convective and insulated tip conditions. The authors have made an effort to study the effect of various important parameters involved in the transfer of heat through porous fins as well as the temperature distribution along the fin length subjected to both convective as well as insulated ends. The non-linear equation obtained has been solved by Adomian Decomposition method and validated with a numerical scheme called Finite Difference method by using a central difference scheme and Gauss Siedel Iterative method.
- 1 January 2017
- Published by AIP Publishing in AIP Conference Proceedings
- Vol. 1859, 020009
Computational investigation of heat transfer analysis through perforated pin fins of different materials
The present work investigates the enhancement of heat transfer rate through staggered perforated pin fins of different materials with increasing number and size of perforations. Three dimensional CFD simulations have been carried out to analyze the effects of fin number, size and materials of fin to enhance heat transfer rate against pressure loss. Results show that the heat transfer rates of perforated fins up to certain perforation number and size are always greater than the solid ones and with the change of fin material heat transfer rate also improves significantly. On the other hand pressure drop through heat sink decreases not only with increasing perforation number but also with size of perforations.
- 1 January 2017
- Published by AIP Publishing in AIP Conference Proceedings
- Vol. 1859, 020009
Computational investigation of heat transfer analysis through perforated pin fins of different materials
The present work investigates the enhancement of heat transfer rate through staggered perforated pin fins of different materials with increasing number and size of perforations. Three dimensional CFD simulations have been carried out to analyze the effects of fin number, size and materials of fin to enhance heat transfer rate against pressure loss. Results show that the heat transfer rates of perforated fins up to certain perforation number and size are always greater than the solid ones and with the change of fin material heat transfer rate also improves significantly. On the other hand pressure drop through heat sink decreases not only with increasing perforation number but also with size of perforations.
- 1 January 2017
- Published by AIP Publishing in AIP Conference Proceedings
- Vol. 1859, 020036
A brief review on the recent advances in scramjet engine
The scramjet engine is the most favourable air breathing propulsive system and suitable option for high-speed flight (Ma<4). Several scientists across the globe are continuously working on the advancement of the high-speed scramjet engine due to its implementation in the military missiles, low-cost access to space etc. The mixing phenomena associated with air and fuel is the salient feature for the effective combustion process and the fuel and air should be mixed adequately before entering into the combustor. But the key challenges associated with scramjet engine are the high speed of air inside the combustor and low residence time which actually deteriorate the combustion phenomena. That’s why numerous computational, as well as experimental researches are being carried out by several researchers. The flow-field inside the scramjet engine is very complex. Hence an elaborated approach of the complicated combustion and mixing process inside the combustor is essential for the upgradation of the effective scramjet engine. This paper clearly signifies a brief review of the current development in scramjet engine.
- 1 January 2017
- Published by AIP Publishing in AIP Conference Proceedings
- Vol. 1859, 020036
A brief review on the recent advances in scramjet engine
The scramjet engine is the most favourable air breathing propulsive system and suitable option for high-speed flight (Ma<4). Several scientists across the globe are continuously working on the advancement of the high-speed scramjet engine due to its implementation in the military missiles, low-cost access to space etc. The mixing phenomena associated with air and fuel is the salient feature for the effective combustion process and the fuel and air should be mixed adequately before entering into the combustor. But the key challenges associated with scramjet engine are the high speed of air inside the combustor and low residence time which actually deteriorate the combustion phenomena. That’s why numerous computational, as well as experimental researches are being carried out by several researchers. The flow-field inside the scramjet engine is very complex. Hence an elaborated approach of the complicated combustion and mixing process inside the combustor is essential for the upgradation of the effective scramjet engine. This paper clearly signifies a brief review of the current development in scramjet engine.