Victor H. Orozco
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Victor H. Orozco has a total of 38 co-authors. Here are the top co-authors by number of shared publications:
Betty L. López
7 shared publicationsLuis F. Giraldo
Laboratorio de Investigación en Polímeros (LIPOL), Instituto de Química, Universidad de Antioquia, 050010 Medellín, Colombia
4 shared publications- Andrés Felipe Vargas
Instituto Tecnológico Metropolitano
3 shared publications - Jennifer T Cruz
Polymer Research Laboratory, University of Antioquia, Medellin, Colombia
2 shared publications José Miguel Martín-Martínez
2 shared publications- Juliana Palacio
Grupo De Investigación Ciencia de Los Materiales, Instituto de Química, Facultad de Ciencias Exactas Y Naturales, Universidad de Antioquia (UdeA), Calle 70 No. 52-21, Colombia
2 shared publications
Latest Publications
- Open Access
- 29 October 2024
- Published by Taylor & Francis in Nanomedicine
- Vol. 20 (1) , 9-22
Pluronic F127/lecithin PLGA nanoparticles as carriers of monocyte-targeted jakinibs: a potential therapeutic platform
Aim: In this study, PLGA nanoparticles (PNPs) emulsified in Pluronic F127 (F127)/Lecithin (LEC) were designed to load Itacitinib (ITA), a selective JAK1 inhibitor, for targeting human monocytes.Materials & methods: The physicochemical characteristics of empty and ITA-loaded F127/LEC PNPs were analyzed. The binding and internalization of NPs in leukocytes were evaluated. The effect of NPs on monocyte activation and JAK1 inhibition was assessed.Results: F127/LEC PNPs were selectively bound and internalized by monocytes, sparing other leukocytes. ITA-F127/LEC PNPs significantly dampened monocyte activation. They also inhibited the monocyte's ability to promote T-cell proliferation and inhibited proinflammatory cytokine production.Conclusion: ITA-loaded F127/LEC PNPs showed potential for monocyte-targeted therapy, offering new avenues for disease treatment.
- 29 October 2024
- Published by Taylor & Francis in Nanomedicine
- Vol. 20 (1) , 9-22
Open AccessPluronic F127/lecithin PLGA nanoparticles as carriers of monocyte-targeted jakinibs: a potential therapeutic platform
Aim: In this study, PLGA nanoparticles (PNPs) emulsified in Pluronic F127 (F127)/Lecithin (LEC) were designed to load Itacitinib (ITA), a selective JAK1 inhibitor, for targeting human monocytes.Materials & methods: The physicochemical characteristics of empty and ITA-loaded F127/LEC PNPs were analyzed. The binding and internalization of NPs in leukocytes were evaluated. The effect of NPs on monocyte activation and JAK1 inhibition was assessed.Results: F127/LEC PNPs were selectively bound and internalized by monocytes, sparing other leukocytes. ITA-F127/LEC PNPs significantly dampened monocyte activation. They also inhibited the monocyte's ability to promote T-cell proliferation and inhibited proinflammatory cytokine production.Conclusion: ITA-loaded F127/LEC PNPs showed potential for monocyte-targeted therapy, offering new avenues for disease treatment.
- 20 June 2024
- Published by Taylor & Francis in Nanomedicine
- Vol. 19 (15) , 1407-1423
PLGA-LEC/F127 hybrid nanoparticles loaded with curcumin and their modulatory effect on monocytes
Aim: To investigate the effect of surfactant type on curcumin-loaded (CUR) PLGA nanoparticles (NPs) to modulate monocyte functions. Materials & methods: The nanoprecipitation method was used, and PLGA NPs were designed using Pluronic F127 (F127) and/or lecithin (LEC) as surfactants. Results: The Z-average of the NPs was 0.128 MPa, they were stable during storage at 4°C, ζ-potential ∼-40 mV, polydispersity index 94%. PLGA-LEC/F127 NPs showed favorable physicochemical and nanomechanical properties. These NPs were bound and internalized mainly by monocytes, suppressed monocyte-induced reactive oxygen species production, and decreased the ability of monocytes to modulate T-cell proliferation. Conclusion: These results demonstrate the potential of these NPs for targeted therapy.
- 20 June 2024
- Published by Taylor & Francis in Nanomedicine
- Vol. 19 (15) , 1407-1423
PLGA-LEC/F127 hybrid nanoparticles loaded with curcumin and their modulatory effect on monocytes
Aim: To investigate the effect of surfactant type on curcumin-loaded (CUR) PLGA nanoparticles (NPs) to modulate monocyte functions. Materials & methods: The nanoprecipitation method was used, and PLGA NPs were designed using Pluronic F127 (F127) and/or lecithin (LEC) as surfactants. Results: The Z-average of the NPs was 0.128 MPa, they were stable during storage at 4°C, ζ-potential ∼-40 mV, polydispersity index 94%. PLGA-LEC/F127 NPs showed favorable physicochemical and nanomechanical properties. These NPs were bound and internalized mainly by monocytes, suppressed monocyte-induced reactive oxygen species production, and decreased the ability of monocytes to modulate T-cell proliferation. Conclusion: These results demonstrate the potential of these NPs for targeted therapy.
- 18 June 2024
- Published by American Chemical Society (ACS) in Journal of Chemical Information and Modeling
- Vol. 64 (13) , 5127-5139
Rational Design of Molecularly Imprinted Polymers for Curcuminoids Binding: Computational and Experimental Approaches for the Selection of Functional Monomers
Molecularly imprinted polymers (MIPs) have emerged as bespoke materials with versatile molecular applications. In this study, we propose a proof of concept for a methodology employing molecular dynamics (MD) simulations to guide the selection of functional monomers for curcuminoid binding in MIPs. Curcumin, demethoxycurcumin, and bisdemethoxycurcumin are phenolic compounds widely employed as spices, pigments, additives, and therapeutic agents, representing the three main curcuminoids of interest. Through MD simulations, we investigated prepolymerization mixtures composed of various functional monomers, including acrylamide (ACA), acrylic acid (AA), methacrylic acid (MAA), and N-vinylpyrrolidone (NVP), with ethylene glycol dimethacrylate (EGDMA) as the cross-linker and acetonitrile as the solvent. Curcumin was selected as the template molecule due to its structural similarity to the other curcuminoids. Notably, the prepolymerization mixture containing NVP as the functional monomer demonstrated superior molecular recognition capabilities toward curcumin. This observation was supported by higher functional monomer molecules surrounding the template, a lower total nonbonded energy between the template and monomer, and a greater number of hydrogen bonds in the aggregate. These findings suggest a stronger affinity between the functional monomer NVP and the template. We synthesized, characterized, and conducted binding tests on the MIPs to validate the MD simulation results. The experimental binding tests confirmed that the MIP-NVP exhibited higher binding capacity. Consequently, based on MD simulations, our computational methodology effectively guided the selection of the functional monomer, leading to MIPs with binding capacity for curcuminoids. The outcomes of this study provide a valuable reference for the rational design of MIPs through MD simulations, facilitating the selection of components for MIPs. This computational approach holds the potential for extension to other templates, establishing a robust methodology for the rational design of MIPs.
- 18 June 2024
- Published by American Chemical Society (ACS) in Journal of Chemical Information and Modeling
- Vol. 64 (13) , 5127-5139
Rational Design of Molecularly Imprinted Polymers for Curcuminoids Binding: Computational and Experimental Approaches for the Selection of Functional Monomers
Molecularly imprinted polymers (MIPs) have emerged as bespoke materials with versatile molecular applications. In this study, we propose a proof of concept for a methodology employing molecular dynamics (MD) simulations to guide the selection of functional monomers for curcuminoid binding in MIPs. Curcumin, demethoxycurcumin, and bisdemethoxycurcumin are phenolic compounds widely employed as spices, pigments, additives, and therapeutic agents, representing the three main curcuminoids of interest. Through MD simulations, we investigated prepolymerization mixtures composed of various functional monomers, including acrylamide (ACA), acrylic acid (AA), methacrylic acid (MAA), and N-vinylpyrrolidone (NVP), with ethylene glycol dimethacrylate (EGDMA) as the cross-linker and acetonitrile as the solvent. Curcumin was selected as the template molecule due to its structural similarity to the other curcuminoids. Notably, the prepolymerization mixture containing NVP as the functional monomer demonstrated superior molecular recognition capabilities toward curcumin. This observation was supported by higher functional monomer molecules surrounding the template, a lower total nonbonded energy between the template and monomer, and a greater number of hydrogen bonds in the aggregate. These findings suggest a stronger affinity between the functional monomer NVP and the template. We synthesized, characterized, and conducted binding tests on the MIPs to validate the MD simulation results. The experimental binding tests confirmed that the MIP-NVP exhibited higher binding capacity. Consequently, based on MD simulations, our computational methodology effectively guided the selection of the functional monomer, leading to MIPs with binding capacity for curcuminoids. The outcomes of this study provide a valuable reference for the rational design of MIPs through MD simulations, facilitating the selection of components for MIPs. This computational approach holds the potential for extension to other templates, establishing a robust methodology for the rational design of MIPs.
- Open Access
- 27 December 2023
- Published by American Chemical Society (ACS) in ACS Omega
- Vol. 9 (1) , 204-214
pH-Sensitive Acrylic Terpolymers for the Coating of Orally Administered Drugs Used for Colonic Release
Polymeric coatings are a promising option for the development of delivery systems for orally administered drugs. However, the gastrointestinal conditions to which they are subjected, which include low pH and solubility as well as peristaltic movements, can limit their applications. In this work, different formulations of polymeric coatings were produced using pH-sensitive materials consisting of copolymers of methyl acrylate, methyl methacrylate, and methacrylic acid. The polymers were synthesized by the emulsion polymerization technique, obtaining small average particle sizes (56-190 nm), molecular weights between 200,000 and 400,000 g/mol, and a glass transition temperature above 35 °C, which are suitable for film formation at room temperature. Thus, they were assessed as coatings for hydroxypropyl methylcellulose capsules (HPMC) using the immersion method, showing adequate capacity to protect the capsule at gastric pH (pH 1.2) and dissolve at the simulated intestinal pH (pH= 7.2). In particular, the higher the content of the acidic monomer, the higher the release time of the test molecule contained in the acrylic terpolymer-coated HPMC capsules proposed, which was a curcuminoid derivative due to their bright color and potential medical benefits. In addition, a minimum number of immersions was required for coating the HPMC capsules at high acidic concentrations, which further facilitates the delayed release needed for colonic treatment. However, too high proportions of methacrylic acid may result in cytotoxicity issues. Consequently, a biocompatible formulation containing a proportion of methyl acrylate, methyl methacrylate, and methacrylic acid of 7:3:3 is proposed as the most adequate for colonic release. Thus, by chemically modulating the molar percentages of the acrylic monomers, it was possible to obtain tailored acrylic terpolymer coatings with different characteristics and desired properties in order to modulate the release kinetics of an active substance in a colonic environment.
- 27 December 2023
- Published by American Chemical Society (ACS) in ACS Omega
- Vol. 9 (1) , 204-214
Open AccesspH-Sensitive Acrylic Terpolymers for the Coating of Orally Administered Drugs Used for Colonic Release
Polymeric coatings are a promising option for the development of delivery systems for orally administered drugs. However, the gastrointestinal conditions to which they are subjected, which include low pH and solubility as well as peristaltic movements, can limit their applications. In this work, different formulations of polymeric coatings were produced using pH-sensitive materials consisting of copolymers of methyl acrylate, methyl methacrylate, and methacrylic acid. The polymers were synthesized by the emulsion polymerization technique, obtaining small average particle sizes (56-190 nm), molecular weights between 200,000 and 400,000 g/mol, and a glass transition temperature above 35 °C, which are suitable for film formation at room temperature. Thus, they were assessed as coatings for hydroxypropyl methylcellulose capsules (HPMC) using the immersion method, showing adequate capacity to protect the capsule at gastric pH (pH 1.2) and dissolve at the simulated intestinal pH (pH= 7.2). In particular, the higher the content of the acidic monomer, the higher the release time of the test molecule contained in the acrylic terpolymer-coated HPMC capsules proposed, which was a curcuminoid derivative due to their bright color and potential medical benefits. In addition, a minimum number of immersions was required for coating the HPMC capsules at high acidic concentrations, which further facilitates the delayed release needed for colonic treatment. However, too high proportions of methacrylic acid may result in cytotoxicity issues. Consequently, a biocompatible formulation containing a proportion of methyl acrylate, methyl methacrylate, and methacrylic acid of 7:3:3 is proposed as the most adequate for colonic release. Thus, by chemically modulating the molar percentages of the acrylic monomers, it was possible to obtain tailored acrylic terpolymer coatings with different characteristics and desired properties in order to modulate the release kinetics of an active substance in a colonic environment.
- 1 January 2020
- Published by Elsevier in Progress in Organic Coatings
- Vol. 138
Study of waterborne polyurethane materials under aging treatments. Effect of the soft segment length
- 1 January 2020
- Published by Elsevier in Progress in Organic Coatings
- Vol. 138
Study of waterborne polyurethane materials under aging treatments. Effect of the soft segment length
- 1 May 2018
- Published by Elsevier in Progress in Organic Coatings
- Vol. 118, 30-39
Hybrid waterborne polyurethane/acrylate dispersion synthesized with bisphenol A-glicidylmethacrylate (Bis-GMA) grafting agent
- 1 May 2018
- Published by Elsevier in Progress in Organic Coatings
- Vol. 118, 30-39
Hybrid waterborne polyurethane/acrylate dispersion synthesized with bisphenol A-glicidylmethacrylate (Bis-GMA) grafting agent
- 1 July 2014
- Published by American Scientific Publishers in Journal of Nanoscience and Nanotechnology
- Vol. 14 (7) , 4918-4929
Tribological Properties of Polypropylene Composites with Carbon Nanotubes and Sepiolite
Carbon nanotubes (CNTs) and sepiolite (SEP) were modified in order to improve their compatibility with the polypropylene (PP) matrix. Carboxylic groups were introduced into the CNTs through an oxidative treatment and aliphatic chains were incorporated on SEP by ion exchange of a cationic surfactant. Maleic anhydride grafted polypropylene (PPgMA) was mixed with neat PP to introduce polar groups into the polymer matrix. Composites including modified and non-modified fillers were prepared by melt extrusion. Dispersion and interaction of the CNTs with the PP and PPgMA matrices were evaluated by Raman spectroscopy while a focused ion beam/scanning electron microscopy (FIB/SEM) was used for SEP containing composites. Scratch resistance, microhardness, dynamic friction and wear were determined. Raman spectroscopy shows that the introduction of polar groups into PP matrices has a positive effect on the dispersion of modified CNTs. FIB/SEM results show that the modification of SEP improves its dispersion in the polypropylene matrix; filler clusters found in the PPgMA matrix are much times smaller than those in the neat PP. Despite of SEP agglomerates in the composites, a good interaction between both phases is seen; SEP particles are fully coated and embedded inside the PP matrix. The ‘lack of cooperation’ between unmodified PP and its fillers results in nanocomposites with larger residual depths; by contrast, PPgMA does ‘cooperate’ with its fillers so that the nanocomposites in scratch resistance testing have smaller residual depths Rh than the neat PPgMA. Addition of the fillers to PPgMA also increases the hardness. As for wear rates, some our fillers provide higher and some lower wear rates than PP.
- 1 July 2014
- Published by American Scientific Publishers in Journal of Nanoscience and Nanotechnology
- Vol. 14 (7) , 4918-4929
Tribological Properties of Polypropylene Composites with Carbon Nanotubes and Sepiolite
Carbon nanotubes (CNTs) and sepiolite (SEP) were modified in order to improve their compatibility with the polypropylene (PP) matrix. Carboxylic groups were introduced into the CNTs through an oxidative treatment and aliphatic chains were incorporated on SEP by ion exchange of a cationic surfactant. Maleic anhydride grafted polypropylene (PPgMA) was mixed with neat PP to introduce polar groups into the polymer matrix. Composites including modified and non-modified fillers were prepared by melt extrusion. Dispersion and interaction of the CNTs with the PP and PPgMA matrices were evaluated by Raman spectroscopy while a focused ion beam/scanning electron microscopy (FIB/SEM) was used for SEP containing composites. Scratch resistance, microhardness, dynamic friction and wear were determined. Raman spectroscopy shows that the introduction of polar groups into PP matrices has a positive effect on the dispersion of modified CNTs. FIB/SEM results show that the modification of SEP improves its dispersion in the polypropylene matrix; filler clusters found in the PPgMA matrix are much times smaller than those in the neat PP. Despite of SEP agglomerates in the composites, a good interaction between both phases is seen; SEP particles are fully coated and embedded inside the PP matrix. The ‘lack of cooperation’ between unmodified PP and its fillers results in nanocomposites with larger residual depths; by contrast, PPgMA does ‘cooperate’ with its fillers so that the nanocomposites in scratch resistance testing have smaller residual depths Rh than the neat PPgMA. Addition of the fillers to PPgMA also increases the hardness. As for wear rates, some our fillers provide higher and some lower wear rates than PP.
- 20 July 2013
- Published by Springer Nature in Colloid and Polymer Science
- Vol. 291 (12) , 2775-2781
Increased covalent conjugation of a model antigen to poly(lactic acid)-g-maleic anhydride nanoparticles compared to bare poly(lactic acid) nanoparticles
- 20 July 2013
- Published by Springer Nature in Colloid and Polymer Science
- Vol. 291 (12) , 2775-2781
Increased covalent conjugation of a model antigen to poly(lactic acid)-g-maleic anhydride nanoparticles compared to bare poly(lactic acid) nanoparticles
- Open Access
- 1 January 2011
- Published by Sociedade Brasileira de Quimica (SBQ) in Journal of the Brazilian Chemical Society
- Vol. 22 (12) , 2304-2311
Effect of the molecular weight on the physicochemical properties of poly(lactic acid) nanoparticles and on the amount of ovalbumin adsorption
Poly(lactic acid) (PLA) nanoparticles were prepared to be used as potential platform for vaccine systems. Commercial high molecular weight PLA (PLA HMW) with Mw 1.5 × 10(5) and low molecular weight poly(lactic acid) (PLA LMW) with Mw 9.3 × 10³ were obtained by direct polycondensation from D,L lactic acid and used to prepare nanoparticles by solvent displacement method. The effect of the molecular weight on the physicochemical properties of the polymers, on the nanoparticles dispersions and the amount of ovalbumin (OVA) adsorption was studied. The PLA HMW and PLA LMW were characterized by Fourier transformed infrared spectroscopy (FTIR), thermogravimetrical analysis (TGA), modulated temperature differential scanning calorimetry (MTDSC) and gel permeation chromatography (GPC). The particle size distribution and ζ-potential of the obtained dispersions were measured by dynamic light scattering (DLS) and electroacoustic spectroscopy, respectively. The ovalbumin adsorption on nanoparticles was evaluated by the Bradford method. PLA LMW dispersion showed lower ζ-potential values and larger sizes compared to PLA HMW dispersion. A minor OVA adsorption was achieved for PLA LMW.
- 1 January 2011
- Published by Sociedade Brasileira de Quimica (SBQ) in Journal of the Brazilian Chemical Society
- Vol. 22 (12) , 2304-2311
Open AccessEffect of the molecular weight on the physicochemical properties of poly(lactic acid) nanoparticles and on the amount of ovalbumin adsorption
Poly(lactic acid) (PLA) nanoparticles were prepared to be used as potential platform for vaccine systems. Commercial high molecular weight PLA (PLA HMW) with Mw 1.5 × 10(5) and low molecular weight poly(lactic acid) (PLA LMW) with Mw 9.3 × 10³ were obtained by direct polycondensation from D,L lactic acid and used to prepare nanoparticles by solvent displacement method. The effect of the molecular weight on the physicochemical properties of the polymers, on the nanoparticles dispersions and the amount of ovalbumin (OVA) adsorption was studied. The PLA HMW and PLA LMW were characterized by Fourier transformed infrared spectroscopy (FTIR), thermogravimetrical analysis (TGA), modulated temperature differential scanning calorimetry (MTDSC) and gel permeation chromatography (GPC). The particle size distribution and ζ-potential of the obtained dispersions were measured by dynamic light scattering (DLS) and electroacoustic spectroscopy, respectively. The ovalbumin adsorption on nanoparticles was evaluated by the Bradford method. PLA LMW dispersion showed lower ζ-potential values and larger sizes compared to PLA HMW dispersion. A minor OVA adsorption was achieved for PLA LMW.
- 1 December 2010
- Published by Elsevier in Composites Part A: Applied Science and Manufacturing
- Vol. 41 (12) , 1797-1806
Influence of fiber-like nanofillers on the rheological, mechanical, thermal and fire properties of polypropylene: An application to multifilament yarn
- 1 December 2010
- Published by Elsevier in Composites Part A: Applied Science and Manufacturing
- Vol. 41 (12) , 1797-1806
Influence of fiber-like nanofillers on the rheological, mechanical, thermal and fire properties of polypropylene: An application to multifilament yarn