Eckhard Flöter
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Eckhard Flöter has a total of 40 co-authors. Here are the top co-authors by number of shared publications:
- Henriette Brykczynski
Department of Food Process Engineering, Technische Universität at Berlin 1 , Kaiserin-Augusta-Allee 14, Berlin 10553
5 shared publications - Julia Seilert
Department of Food Process Engineering, Technische Universität Berlin, Straße des 17. Juni 135, Berlin 10623, Germany
5 shared publications - Till Wettlaufer
Faculty III Process Sciences, Department of Food Technology and Food Chemistry, Food Process Engineering, Technische Universität Berlin, Berlin, Germany
5 shared publications Daniel Prange
Technical University of Berlin
2 shared publications- Hannah M. Hartge
Max Planck Institute for Polymer Research 1 , Ackermannweg 10, 55128 Mainz, Germany
2 shared publications - Maria Scharfe
Department of Food Processing Technical University Berlin Berlin Germany
2 shared publications
Latest Publications
- Open Access
- 5 November 2026
- Published by American Chemical Society (ACS) in Crystal Growth & Design
- Vol. 26 (22) , 9539-9552
Oleogelation with Mixtures of Pure Wax Esters: Considering Chain Length Disparity and Lamellar Orientation
Among the main components of natural waxes, long-chained wax esters (WEs) (WE) are considered dominant for the crystalline network structure in wax-based oleogels. So far, only preliminary data on their mixing behavior exists, suggesting that the carbon number difference between the respective WEs (ΔWE) determines the formation of either separate or mixed crystalline phases. However, to thoroughly understand the complex solid-phase mixing behavior of the WEs in natural waxes, a more systematic understanding of WE mixing is required. Oleogels structured by a binary mixture of WEs in a medium-chain triglyceride oil were investigated regarding crystallization behavior and physical properties using X-ray scattering, differential scanning calorimetry, oscillatory rheology, and microscopy. According to ΔWE, the systems were categorized into large, medium, small, or no chain length mismatch. Differences in the lamellar orientation of the respective WEsorthogonal or tiltedwere another parameter studied. It was found that ΔWE plays a dominant role, deciding whether separate or simultaneous crystallization occurs. Mixtures with a high ΔWE (≥8) exhibit separate crystallization, characterized by multiple thermal events, distinct lamellar spacings, and stepwise gelation. As ΔWE decreases, endothermic melting events were found to be increasingly overlapping. At small ΔWE, this results in peak fronting or multiple co-existing solid phases. With the exception of mixtures with ΔWE = 0, mixed oleogels consistently exhibited higher maximum complex shear moduli, Gmax*. Micrographs revealed that the higher-melting phase serves as a nucleation site for the lower-melting phase. Hence, structure reinforcement by reduced homogeneity and increased platelet−platelet interactions may arise from an increased surface roughness.
- 5 November 2026
- Published by American Chemical Society (ACS) in Crystal Growth & Design
- Vol. 26 (22) , 9539-9552
Open AccessOleogelation with Mixtures of Pure Wax Esters: Considering Chain Length Disparity and Lamellar Orientation
Among the main components of natural waxes, long-chained wax esters (WEs) (WE) are considered dominant for the crystalline network structure in wax-based oleogels. So far, only preliminary data on their mixing behavior exists, suggesting that the carbon number difference between the respective WEs (ΔWE) determines the formation of either separate or mixed crystalline phases. However, to thoroughly understand the complex solid-phase mixing behavior of the WEs in natural waxes, a more systematic understanding of WE mixing is required. Oleogels structured by a binary mixture of WEs in a medium-chain triglyceride oil were investigated regarding crystallization behavior and physical properties using X-ray scattering, differential scanning calorimetry, oscillatory rheology, and microscopy. According to ΔWE, the systems were categorized into large, medium, small, or no chain length mismatch. Differences in the lamellar orientation of the respective WEsorthogonal or tiltedwere another parameter studied. It was found that ΔWE plays a dominant role, deciding whether separate or simultaneous crystallization occurs. Mixtures with a high ΔWE (≥8) exhibit separate crystallization, characterized by multiple thermal events, distinct lamellar spacings, and stepwise gelation. As ΔWE decreases, endothermic melting events were found to be increasingly overlapping. At small ΔWE, this results in peak fronting or multiple co-existing solid phases. With the exception of mixtures with ΔWE = 0, mixed oleogels consistently exhibited higher maximum complex shear moduli, Gmax*. Micrographs revealed that the higher-melting phase serves as a nucleation site for the lower-melting phase. Hence, structure reinforcement by reduced homogeneity and increased platelet−platelet interactions may arise from an increased surface roughness.
- 1 September 2026
- Published by AIP Publishing in Physics of Fluids
- Vol. 38 (9)
Wax esters solubility in triacylglycerols: Molecular dynamics study of liquid state interactions and conformations
The dissolution of wax esters (WEs) in liquid oils plays a central role in the bulk solution thermodynamic characteristics, yet the molecular origins of their solubility remain poorly understood. In the current study, the fluid organization of WEs in medium-chain triacylglycerol (TAG) was explored using molecular dynamics simulations. Three WEs differing in their total carbon number, and having equal asymmetry between the lengths of their alkyl chains, were examined as pure systems and at 10 mol. % mixed in a model TAG. Excess volumes and excess enthalpies were calculated to evaluate deviations from ideal mixing, while molecular conformations, radial distribution functions, Kirkwood–Buff integrals, and aggregate statistics were evaluated. The simulations revealed ideal mixing for CN30ΔCN2 and CN34ΔCN2, whereas CN46ΔCN2 exhibited significant positive excess volume and excess enthalpy, indicating reduced compatibility with the TAG. Analysis of molecular conformations showed that shorter WEs possess alkyl chain end-to-end distance distributions closer to those of the TAG fatty acids, resulting in greater conformational compatibility. Structural analysis demonstrated that local organizations in these fluids are primarily governed by interactions between the central polar ester moieties rather than by alkyl-chain packing. The longest WE exhibited reduced local density fluctuations, explaining its larger deviation from ideality. Aggregate analysis showed that shorter WEs form fewer but larger and more interconnected transient clusters, whereas longer WEs form smaller organizations. These findings provide a molecular-level framework linking molecular conformations, local fluid structure, and non-ideal mixing in WE–TAG mixtures, offering fundamental insight into the structure–thermodynamics relation of complex organic fluids.
- 1 September 2026
- Published by AIP Publishing in Physics of Fluids
- Vol. 38 (9)
Wax esters solubility in triacylglycerols: Molecular dynamics study of liquid state interactions and conformations
The dissolution of wax esters (WEs) in liquid oils plays a central role in the bulk solution thermodynamic characteristics, yet the molecular origins of their solubility remain poorly understood. In the current study, the fluid organization of WEs in medium-chain triacylglycerol (TAG) was explored using molecular dynamics simulations. Three WEs differing in their total carbon number, and having equal asymmetry between the lengths of their alkyl chains, were examined as pure systems and at 10 mol. % mixed in a model TAG. Excess volumes and excess enthalpies were calculated to evaluate deviations from ideal mixing, while molecular conformations, radial distribution functions, Kirkwood–Buff integrals, and aggregate statistics were evaluated. The simulations revealed ideal mixing for CN30ΔCN2 and CN34ΔCN2, whereas CN46ΔCN2 exhibited significant positive excess volume and excess enthalpy, indicating reduced compatibility with the TAG. Analysis of molecular conformations showed that shorter WEs possess alkyl chain end-to-end distance distributions closer to those of the TAG fatty acids, resulting in greater conformational compatibility. Structural analysis demonstrated that local organizations in these fluids are primarily governed by interactions between the central polar ester moieties rather than by alkyl-chain packing. The longest WE exhibited reduced local density fluctuations, explaining its larger deviation from ideality. Aggregate analysis showed that shorter WEs form fewer but larger and more interconnected transient clusters, whereas longer WEs form smaller organizations. These findings provide a molecular-level framework linking molecular conformations, local fluid structure, and non-ideal mixing in WE–TAG mixtures, offering fundamental insight into the structure–thermodynamics relation of complex organic fluids.
- Open Access
- 28 July 2026
- Published by Elsevier in SSRN Electronic Journal
Impact of rice bran wax purity and oleogelation conditions on the structural stability of sunflower oil-based oleogels
The growing demand for healthier ingredients has driven research toward innovative systems, such as oleogels, which can provide nutritional benefits without compromising food texture and mouthfeel. Among various structuring agents, rice bran wax (RBX) is a promising candidate for creating three-dimensional networks in liquid vegetable oils. However, the functional success of these systems is heavily dependent on wax purity and processing conditions. This study investigates the impact of RBX purity and oleogelation conditions on the structural stability of sunflower oil-based oleogels. A purified RBX (obtained via an optimised isolation protocol) was compared with two commercial alternatives to evaluate the possible influence of interfering compounds on microstructural assembly. Results show that the reduced quantity of impurities in the laboratory-purified RBX allowed for a more cohesive crystalline matrix, yielding enhanced stability even at low concentration (1 %wt) under static gelation conditions. Furthermore, the application of mechanical stirring during the oleogelation phase was found to hinder the development of a continuous solid network, promoting the formation of aggregates that led to significant oil leakage during storage. These findings demonstrate that high-performance oleogels can be achieved by optimizing both wax isolation protocols and environmental conditions during oleogelation. This research supports the potential for incorporating high-purity RBX oleogels into complex food matrices as a sustainable alternative to saturated fats, contributing to the development of improved lipid-based food products.
- 28 July 2026
- Published by Elsevier in SSRN Electronic Journal
Open AccessImpact of rice bran wax purity and oleogelation conditions on the structural stability of sunflower oil-based oleogels
The growing demand for healthier ingredients has driven research toward innovative systems, such as oleogels, which can provide nutritional benefits without compromising food texture and mouthfeel. Among various structuring agents, rice bran wax (RBX) is a promising candidate for creating three-dimensional networks in liquid vegetable oils. However, the functional success of these systems is heavily dependent on wax purity and processing conditions. This study investigates the impact of RBX purity and oleogelation conditions on the structural stability of sunflower oil-based oleogels. A purified RBX (obtained via an optimised isolation protocol) was compared with two commercial alternatives to evaluate the possible influence of interfering compounds on microstructural assembly. Results show that the reduced quantity of impurities in the laboratory-purified RBX allowed for a more cohesive crystalline matrix, yielding enhanced stability even at low concentration (1 %wt) under static gelation conditions. Furthermore, the application of mechanical stirring during the oleogelation phase was found to hinder the development of a continuous solid network, promoting the formation of aggregates that led to significant oil leakage during storage. These findings demonstrate that high-performance oleogels can be achieved by optimizing both wax isolation protocols and environmental conditions during oleogelation. This research supports the potential for incorporating high-purity RBX oleogels into complex food matrices as a sustainable alternative to saturated fats, contributing to the development of improved lipid-based food products.
- Open Access
- 21 July 2026
- Published by Wiley in Starch - Stärke
- Vol. 78 (7) , e70270
Combined Effects of Processing, Residual Protein, and Fiber on Pea Starch Gels
Gelatinization and subsequent retrogradation determine the functional properties of starch‐based gels and are strongly influenced by processing conditions. In this study, the combined effects of different thermal and shear treatments during gelatinization, with residual pea protein and/or pea fiber, on pea starch gel properties were investigated. Pea starch blends containing residual pea protein and/or pea fiber were prepared either at constant dry matter or constant starch concentration. The suspensions contained 6.3%–7.5% (w/w) pea starch and 0.6%–1.2% (w/w) residual pea protein and/or pea fiber and were processed at 95°C or 120°C, with and without additional high‐shear treatment (17 000 rpm). Gel strength, elasticity, syneresis, and microstructure were analyzed after 1 and 7 days of storage. Processing conditions strongly influenced the resulting gel properties. Depending on the process applied, gel strength and syneresis differed several‐fold despite identical overall composition. Within each processing condition, starch concentration remained the dominant factor determining gel strength and water‐holding capacity. The effects of residual protein and fiber on pea starch gels were also process‐dependent. Depending on the processing conditions applied, residual protein and fiber could either increase or decrease gel strength and syneresis. These findings demonstrate that processing conditions must be considered alongside composition when evaluating or optimizing starch‐based gel systems.
- 21 July 2026
- Published by Wiley in Starch - Stärke
- Vol. 78 (7) , e70270
Open AccessCombined Effects of Processing, Residual Protein, and Fiber on Pea Starch Gels
Gelatinization and subsequent retrogradation determine the functional properties of starch‐based gels and are strongly influenced by processing conditions. In this study, the combined effects of different thermal and shear treatments during gelatinization, with residual pea protein and/or pea fiber, on pea starch gel properties were investigated. Pea starch blends containing residual pea protein and/or pea fiber were prepared either at constant dry matter or constant starch concentration. The suspensions contained 6.3%–7.5% (w/w) pea starch and 0.6%–1.2% (w/w) residual pea protein and/or pea fiber and were processed at 95°C or 120°C, with and without additional high‐shear treatment (17 000 rpm). Gel strength, elasticity, syneresis, and microstructure were analyzed after 1 and 7 days of storage. Processing conditions strongly influenced the resulting gel properties. Depending on the process applied, gel strength and syneresis differed several‐fold despite identical overall composition. Within each processing condition, starch concentration remained the dominant factor determining gel strength and water‐holding capacity. The effects of residual protein and fiber on pea starch gels were also process‐dependent. Depending on the processing conditions applied, residual protein and fiber could either increase or decrease gel strength and syneresis. These findings demonstrate that processing conditions must be considered alongside composition when evaluating or optimizing starch‐based gel systems.
- Open Access
- 6 March 2026
- Published by Wiley in Journal of Food Process Engineering
- Vol. 49 (3)
A Model‐Based Interpretation for the Apparently Homogeneous Steam Bubble Nucleation in Industrial Evaporative Sucrose Crystallization
The evolution of steam nucleation during a strike in discontinuous evaporating crystallizers for sucrose production is investigated utilizing a newly designed model. Steam nucleation at the wall of the calandria tubes becomes less likely as the strike progresses due to the increasing massecuite level. Other sources of steam bubbles have to be involved to explain ongoing evaporation. Novel to the chosen approach in this study is the consideration of sucrose crystals as active steam nucleation sites. The modeling results are compared with evaporation rates of industrial pans. Data from the process control system of three different sugar factories allow generating reference data for different process points of the strike. Simulation results match reference values qualitatively using input parameters from the literature. Adjustment of the massecuite velocities and heat transfer coefficients to the different operating points results not only in good agreement of experimental and calculated data but also reflects a realistic evolution of the process states. For all observed cases sucrose crystals take over the steam nucleation process at some point during the strike. The evaporation rates achieved this way agree with industrial data. The results affirm the initial hypothesis that steam nucleation on sucrose crystals plays a role in the industrial operation. This opens the field for subsequent questions regarding process design and operation as well as consequences for the surface of the sucrose crystals.
- 6 March 2026
- Published by Wiley in Journal of Food Process Engineering
- Vol. 49 (3)
Open AccessA Model‐Based Interpretation for the Apparently Homogeneous Steam Bubble Nucleation in Industrial Evaporative Sucrose Crystallization
The evolution of steam nucleation during a strike in discontinuous evaporating crystallizers for sucrose production is investigated utilizing a newly designed model. Steam nucleation at the wall of the calandria tubes becomes less likely as the strike progresses due to the increasing massecuite level. Other sources of steam bubbles have to be involved to explain ongoing evaporation. Novel to the chosen approach in this study is the consideration of sucrose crystals as active steam nucleation sites. The modeling results are compared with evaporation rates of industrial pans. Data from the process control system of three different sugar factories allow generating reference data for different process points of the strike. Simulation results match reference values qualitatively using input parameters from the literature. Adjustment of the massecuite velocities and heat transfer coefficients to the different operating points results not only in good agreement of experimental and calculated data but also reflects a realistic evolution of the process states. For all observed cases sucrose crystals take over the steam nucleation process at some point during the strike. The evaporation rates achieved this way agree with industrial data. The results affirm the initial hypothesis that steam nucleation on sucrose crystals plays a role in the industrial operation. This opens the field for subsequent questions regarding process design and operation as well as consequences for the surface of the sucrose crystals.
- Open Access
- 20 May 2025
- Published by Wiley in European Journal of Lipid Science and Technology
- Vol. 127 (8)
Fractionation of Edible Fats: Model Fat‐Oil Separation in Decanter Centrifuge
In this work, the use of a lab‐scale decanter centrifuge for the separation of fat crystal agglomerates from oil is studied. For this purpose, a model system of fully hydrogenated rapeseed oil and canola oil is used. The goal is the continuous mechanical de‐oiling of the oil‐fat slurry. The impact of the particle size and poly‐dispersity of the slurry in combination with the process parameters, pool depth, flowrate, differential speed, and centripetal acceleration, is evaluated. These parameters lead to forces and particles’ velocities that actuate the oil/fat separation. The characteristic ones are theoretically calculated and the impact of each on the solids content in the liquid fraction and in the cake is assessed. The success of each separation process is measured through gas chromatography and light microscopy data. It is found that high hydrostatic pressure on the bowl wall—it already starts from the pool—leads to a compacted cake. At the next step, which happens on the dry beach, low cake axial transport velocity provides enough time for the olein to be removed from the cake pores. These two phenomena, especially in combination, lead to high cake dryness. For a fully continuous dry fractionation process, future research should be focused on the fat crystallization step. Practical applications : A decanter centrifuge is used to study an alternative to the conventional dry fractionation, which employs filtration to separate fat crystal agglomerates from liquid oil. The goal is to offer higher separation efficiencies, more energy and time efficiency, the potential for a fully continuous dry fractionation, less space demands, and process selectivity. Especially the latter, could be utilized as a tripalmitin‐selective alternative method to the current multistep dry or solvent fractionation.
- 20 May 2025
- Published by Wiley in European Journal of Lipid Science and Technology
- Vol. 127 (8)
Open AccessFractionation of Edible Fats: Model Fat‐Oil Separation in Decanter Centrifuge
In this work, the use of a lab‐scale decanter centrifuge for the separation of fat crystal agglomerates from oil is studied. For this purpose, a model system of fully hydrogenated rapeseed oil and canola oil is used. The goal is the continuous mechanical de‐oiling of the oil‐fat slurry. The impact of the particle size and poly‐dispersity of the slurry in combination with the process parameters, pool depth, flowrate, differential speed, and centripetal acceleration, is evaluated. These parameters lead to forces and particles’ velocities that actuate the oil/fat separation. The characteristic ones are theoretically calculated and the impact of each on the solids content in the liquid fraction and in the cake is assessed. The success of each separation process is measured through gas chromatography and light microscopy data. It is found that high hydrostatic pressure on the bowl wall—it already starts from the pool—leads to a compacted cake. At the next step, which happens on the dry beach, low cake axial transport velocity provides enough time for the olein to be removed from the cake pores. These two phenomena, especially in combination, lead to high cake dryness. For a fully continuous dry fractionation process, future research should be focused on the fat crystallization step. Practical applications : A decanter centrifuge is used to study an alternative to the conventional dry fractionation, which employs filtration to separate fat crystal agglomerates from liquid oil. The goal is to offer higher separation efficiencies, more energy and time efficiency, the potential for a fully continuous dry fractionation, less space demands, and process selectivity. Especially the latter, could be utilized as a tripalmitin‐selective alternative method to the current multistep dry or solvent fractionation.
- Open Access
- 13 May 2025
- Published by Royal Society of Chemistry (RSC) in Soft Matter
- Vol. 21 (23) , 4650-4665
On the relevance of inhomogeneity in saturated fatty acid compositions for the crystallization kinetics of fat blends
A study on the crystallization kinetics of industrial grade fat blends of trisaturated and monounsaturated triglycerides relates the polymorphic pathways to the inhomogeneity of the saturated fatty acid composition (stearic versus palmitic acid).
- 13 May 2025
- Published by Royal Society of Chemistry (RSC) in Soft Matter
- Vol. 21 (23) , 4650-4665
Open AccessOn the relevance of inhomogeneity in saturated fatty acid compositions for the crystallization kinetics of fat blends
A study on the crystallization kinetics of industrial grade fat blends of trisaturated and monounsaturated triglycerides relates the polymorphic pathways to the inhomogeneity of the saturated fatty acid composition (stearic versus palmitic acid).
- Open Access
- 3 April 2024
- Published by Wiley in European Journal of Lipid Science and Technology
- Vol. 126 (6) , 2300111
Fractionation of edible fats—Separation of fat‐covered particles by decanter centrifuge
This work investigates the feasibility of using a decanter centrifuge to separate solid particles coated with a high melting fat from a liquid oil. The process involves feeding cold silica particles into a melt, upon which the hardstock fat crystallizes, and the particles are subsequently separated using a decanter centrifuge. Being the first attempt for such a design, only the separation step is studied, and a model system is used. It comprised canola oil (CO), fully hydrogenated rapeseed oil a priori crystallized on silica gel particles. Different particle sizes and accelerations of gravity were studied. To measure the success of this separation process, the data from light microscopy, and differential scanning calorimetry of the feed, oleins, and stearins were used. The findings show that the separation of the fatty particles used in this work, and liquid oil in decanter centrifuges is feasible while future research should focus on the crystallization part of the process. The model developed to describe the oil‐holding capacity of the cake focuses on the capillary liquid entrapped in the spaces between the particles and sufficiently represents the experimental findings which show that separation efficiencies increase with increasing centrifugal acceleration.Practical Applications: This work introduces an alternative fat fractionation process by separating a model system of CO, FHRO, and solid entrainers through a decanter centrifuge. The results can be potentially used for the development of a fully continuous dry fractionation process, which can achieve in one step higher SE than the conventional ones and can be tripalmitate‐selective.
- 3 April 2024
- Published by Wiley in European Journal of Lipid Science and Technology
- Vol. 126 (6) , 2300111
Open AccessFractionation of edible fats—Separation of fat‐covered particles by decanter centrifuge
This work investigates the feasibility of using a decanter centrifuge to separate solid particles coated with a high melting fat from a liquid oil. The process involves feeding cold silica particles into a melt, upon which the hardstock fat crystallizes, and the particles are subsequently separated using a decanter centrifuge. Being the first attempt for such a design, only the separation step is studied, and a model system is used. It comprised canola oil (CO), fully hydrogenated rapeseed oil a priori crystallized on silica gel particles. Different particle sizes and accelerations of gravity were studied. To measure the success of this separation process, the data from light microscopy, and differential scanning calorimetry of the feed, oleins, and stearins were used. The findings show that the separation of the fatty particles used in this work, and liquid oil in decanter centrifuges is feasible while future research should focus on the crystallization part of the process. The model developed to describe the oil‐holding capacity of the cake focuses on the capillary liquid entrapped in the spaces between the particles and sufficiently represents the experimental findings which show that separation efficiencies increase with increasing centrifugal acceleration.Practical Applications: This work introduces an alternative fat fractionation process by separating a model system of CO, FHRO, and solid entrainers through a decanter centrifuge. The results can be potentially used for the development of a fully continuous dry fractionation process, which can achieve in one step higher SE than the conventional ones and can be tripalmitate‐selective.
- Open Access
- 1 January 2024
- Published by AIP Publishing in Physics of Fluids
- Vol. 36 (1)
Rheo-microscopy and flow properties of crystallizing agitated sucrose dispersions
Crystallization from highly supersaturated, agitated (sheared and stirred) solution is a highly non-equilibrium process. Despite being an often observed and intended process, basic scientific research on the rheology of such systems is lacking. This paper presents findings on changes in flow properties and particle formation during crystallization out of highly supersaturated sucrose solution under shear. For this, sucrose solution is subjected to steady shear in a plate-plate rheometer until a high crystal fraction is reached. Rheo-microscopy is performed in order to allow in situ visual observation of the crystal formation. These experiments show the complex interactions of crystal growth and rheological properties. While a high amount of hard particles is formed, the system changes from a homogeneous solution to a highly concentrated hard-particle suspension. At the same time, overall viscosity and loss modulus drop significantly, while the storage modulus rises during crystallization. In addition, image analysis is performed on microscopy images taken at different stages of the process. It confirms that significant decrease in viscosity coincides with major crystal growth, which is explained by the decrease in solute concentration in the continuous phase.
- 1 January 2024
- Published by AIP Publishing in Physics of Fluids
- Vol. 36 (1)
Open AccessRheo-microscopy and flow properties of crystallizing agitated sucrose dispersions
Crystallization from highly supersaturated, agitated (sheared and stirred) solution is a highly non-equilibrium process. Despite being an often observed and intended process, basic scientific research on the rheology of such systems is lacking. This paper presents findings on changes in flow properties and particle formation during crystallization out of highly supersaturated sucrose solution under shear. For this, sucrose solution is subjected to steady shear in a plate-plate rheometer until a high crystal fraction is reached. Rheo-microscopy is performed in order to allow in situ visual observation of the crystal formation. These experiments show the complex interactions of crystal growth and rheological properties. While a high amount of hard particles is formed, the system changes from a homogeneous solution to a highly concentrated hard-particle suspension. At the same time, overall viscosity and loss modulus drop significantly, while the storage modulus rises during crystallization. In addition, image analysis is performed on microscopy images taken at different stages of the process. It confirms that significant decrease in viscosity coincides with major crystal growth, which is explained by the decrease in solute concentration in the continuous phase.
- Open Access
- 1 June 2023
- Published by AIP Publishing in Physics of Fluids
- Vol. 35 (6)
Crystallization in highly supersaturated, agitated sucrose solutions
Supersaturated sucrose solutions that have been sufficiently cooled without nucleation represent a metastable system in which agitation promotes fast crystallization. Applications of this physically interesting process can be found, for example, in the production of fondants in confectionery. This work considers supersaturated sucrose–water solutions under agitation, different temperatures, and concentrations as simplified fondant model systems. Although simple in composition, such solutions undergo complex kinetic and thermodynamic processes during crystallization under agitation. Main attention is paid to the torque during constant kneading of the samples at controlled temperature, accompanied by light microscopic examination of a characteristic sample. All torque curves show a characteristic minimum followed by a sharp peak during crystallization, which are attributed to an interplay of changes in concentration of the continuous liquid phase, formation of big conglomerates, and breaking of largest particles during continued growth. When comparing the crystallization times with classical nucleation theory, it is found that the variations are related to temperature and supersaturation in the same way as given by induction time models of thermodynamics and statistical physics.
- 1 June 2023
- Published by AIP Publishing in Physics of Fluids
- Vol. 35 (6)
Open AccessCrystallization in highly supersaturated, agitated sucrose solutions
Supersaturated sucrose solutions that have been sufficiently cooled without nucleation represent a metastable system in which agitation promotes fast crystallization. Applications of this physically interesting process can be found, for example, in the production of fondants in confectionery. This work considers supersaturated sucrose–water solutions under agitation, different temperatures, and concentrations as simplified fondant model systems. Although simple in composition, such solutions undergo complex kinetic and thermodynamic processes during crystallization under agitation. Main attention is paid to the torque during constant kneading of the samples at controlled temperature, accompanied by light microscopic examination of a characteristic sample. All torque curves show a characteristic minimum followed by a sharp peak during crystallization, which are attributed to an interplay of changes in concentration of the continuous liquid phase, formation of big conglomerates, and breaking of largest particles during continued growth. When comparing the crystallization times with classical nucleation theory, it is found that the variations are related to temperature and supersaturation in the same way as given by induction time models of thermodynamics and statistical physics.