PLPeng Li

Peng Li

*This is an algorithmically generated author record based on publicly available information.

Peng Li has a total of 67 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Altitude‐Triggered Lightning Produces X‐Ray Emission With Temporal Characteristics Comparable to Those of Natural First‐Stroke Stepped Leaders

    by Yuan Wang, Xiao Li, Xiaoqiang Li, Baofeng Cao, Yanfeng Fan, Weitao Lyu, Rubin Jiang, Gaopeng Lu, Peng Li, Xiong Zhang

    This study presents the first detection of X‐rays from a first‐stroke downward stepped leader in altitude‐triggered lightning. During 2023–2025, only one of seven altitude‐triggered flashes exhibited a clear X‐ray burst during the first‐stroke leader. This burst lasted ∼327 μs and contained 98 pulses, with a mean energy of ∼550 keV and a mean pulse interval of 20.9 μs. High‐speed imaging confirmed the emission was synchronous with downward stepped‐leader development. The burst's temporal structure differs markedly from the short, dense X‐ray bursts of subsequent‐stroke leaders, but closely resembles those observed from natural first‐stroke stepped leaders. Our analyses indicate that detectable X‐rays depend on both strong leader activity and the propagation environment. These findings demonstrate that altitude‐triggered lightning can produce X‐ray emission with temporal characteristics comparable to those observed from natural first‐stroke stepped leaders under controlled conditions.

  • Differences Between Two Types of Trans‐Ionospheric Pulse Pairs (TIPPs) Observed by SY‐15 Satellite at 500 km Altitude: Physical Parameters and Geographic Distribution

    by Zongxiang Li, Xiong Zhang, Xiaoqiang Li, Feifan Liu, Baoyou Zhu, Rubin Jiang, Hongbo Zhang, Yongli Wei, Yuan Wang, Baofeng Cao, et al.

    The SY‐15 satellite's wideband electromagnetic pulse detector (WEMPD) detects two types of trans‐ionospheric pulse pairs (TIPPs): Wide and narrow TIPPs, responding to intracloud narrow bipolar events and discrete breakdown events, respectively. WEMPD observations show that: (a) The wide TIPP intra‐pair separation has an inverse relationship to the source‐satellite geometric distance; (b) Wide and narrow TIPPs are widely distributed in lightning chimney regions, while narrow TIPPs are not detected over the sampled inland regions in this study; (c) Events with pulse energy ratio greater than one occur predominantly only in wide TIPPs and are concentrated in lightning‐rich coastal waters; (d) The wide TIPPs' mean discharge altitude (15.4 km) derived from the reflection model using the intra‐pair separation is significantly higher than that of narrow TIPPs (13.0 km), consistent with ground‐based observations. All the above phenomena and discrepancies can be reasonably explained within the theoretical framework of the pulse‐pair reflection model. This research is of great importance for the development of global transient event warning systems.

  • Open Access

    Investigation on the Dynamic Response and Failure Mode of Clay Brick Masonry Walls Under Long-Duration Explosion

    by Chengrui Wang, Kai Zhang, Wei Liu, Peng Li, Ming Yang, Xiaolei Chen

    Masonry structures are widely used in civil engineering due to their favorable load-bearing capacity and construction efficiency; however, the threat posed by long-duration blast loads from industrial accidents and large-yield explosions has become increasingly prominent. Existing research has primarily focused on the response of masonry walls under conventional short-duration explosions, while systematic investigations remain limited regarding the differentiated failure mechanisms induced by long-duration blasts. To address this gap, this study adopts and validates a full-scale simplified micro-modeling approach for clay brick masonry walls using LS-DYNA. The model enables systematic comparison of long-duration blast loads and conventional blast loads simulated by the CONWEP method under equal peak overpressure and equal impulse conditions. Numerical results indicate that, under equal peak overpressure (0.18 MPa), the long-duration blast load induces global deformation and cumulative damage leading to complete collapse, whereas the conventional blast load results in only elastic response. Under equal impulse (13.5 kPa·s), both loads cause severe damage, yet the conventional blast load triggers instantaneous localized fragmentation with a higher collapse rate, while the long-duration blast load governs failure through sustained overpressure-induced global deformation and crack propagation. The comparison of mid-span displacement–time histories across different loading cases further quantifies these distinct failure modes, revealing fundamentally different deformation development rates and collapse characteristics. The key contributions of this study are summarized as follows: A validated simplified micro-model is developed that reproduces the experimental damage patterns of masonry walls. A comparison identifies and mechanistically explains the differentiated failure modes between the two load types. Under the conditions considered in this study, critical transition thresholds of peak overpressure and impulse governing the damage mode shift from minor cracking to global collapse are determined. These findings provide a scientific basis for distinguishing blast-resistant design strategies for masonry structures according to explosion type.

  • Open Access

    Infrasound Signal Classification Fusion Model Based on Double-Branch and Multi-Scale CNN and LSTM

    by Hao Yin, Yu Lu, Yunhui Wu, Wei Cheng, Xinliang Pang, Peng Li

    The accurate classification of infrasound events is significant in natural disaster warning, verification of nuclear test bans and geophysical research. Current deep learning-based classification methods mostly focus on denoised and filtered signals. To simplify the process, avoid information loss, and address the issues of incomplete feature extraction by single-scale convolution kernels and the potential loss of physical information by single models, this paper directly utilizes raw infrasound signals and proposes two fusion classification models based on multi-scale Convolutional Neural Network (CNN) and Long Short-Term Memory (LSTM). Experiments were conducted on a typical infrasound signal dataset (comprising four signal types: mountain-associated waves, auroral infrasound waves, volcanic eruptions, and microbaroms). The performances of the two models were compared in terms of accuracy, convergence speed, and stability. The results indicate that both models achieve classification accuracies exceeding 99% with optimal parameter combinations. The dual-branch multi-scale CNN-LSTM model generally outperforms the multi-scale CNN-LSTM model in classification accuracy, while also demonstrating faster convergence speed and better stability. Addressing the class imbalance in the dataset, evaluations using precision, recall, and F1-score further validated the effectiveness of the proposed models. This study demonstrates that the proposed methods can effectively achieve end-to-end classification of raw infrasound signals and are competitive with existing techniques.


  • Open Access

    On the Beam Characteristics of X‐Ray Bursts Observed in Rocket‐Triggered Lightning

    by Yuan Wang, Peng Li, Yang Zhang, Heting Hong, Xiao Li, Yanfeng Fan, Baofeng Cao, Weiqun Xu, Zongxiang Li, Weitao Lyu, et al.

    Employing the multi‐station Thunderstorm Energetic Radiation Observation System, we detected X‐ray bursts during two rocket‐triggered lightning events in 2024. By innovatively integrating optical imaging with three‐dimensional lightning channel reconstruction based on Distributed Acoustic Sensing (DAS), we analyzed the X‐ray emission characteristics from these events. During the Tl_20240812 event, lateral deflection of a descending negative leader resulted in X‐rays being detected exclusively by a distal sensor. This clear spatial correlation provides direct and conclusive geometric evidence that the radiation is emitted in a beam‐like pattern along the leader propagation path. Furthermore, based on the Tl_20240801 event, this study achieved the first quantitative estimation of the X‐ray photon beam half‐angle width, determined to be between 40° and 46°. This angular range aligns with the predicted structure of the leader tip electric field, thereby providing robust support for the hypothesis that X‐rays originate from the leader tip high‐field runaway electron mechanism.


  • Open Access

    Investigation of Blast Resistance Performance in Reinforced Concrete Slabs Using CONWEP-ALE Coupling Algorithm

    by Chengrui Wang, Kai Zhang, Wei Liu, Peng Li

    The Conventional Weapons Effects Program (CONWEP) algorithm often lacks sufficient accuracy in predicting blast responses of reinforced concrete (RC) slabs, while the Arbitrary Lagrangian–Eulerian (ALE) algorithm demands prohibitively high computational resources. To enhance the engineering applicability of blast resistance assessments for RC slabs, this study proposed a novel CONWEP-ALE coupling algorithm. Utilizing validated blast tests on RC slabs, a representative finite element model was established using LS-DYNA. The performance differences between the CONWEP, ALE, and CONWEP-ALE coupling algorithms were systematically compared under three distinct blast scenarios. Key response characteristics, including incident overpressure, structural deformation, and computational time, were analyzed to evaluate the predictive capabilities of each algorithm for RC slab dynamic response. The results demonstrated that the CONWEP-ALE coupling algorithm achieved the lowest average error (23.23%) in predicting incident overpressure among the three algorithms. Both the ALE and CONWEP-ALE coupling algorithms demonstrate superior accuracy over the CONWEP algorithm in predicting the displacement. Crucially, computational time was reduced by approximately 50% using the CONWEP-ALE algorithm for the specific blast scenarios. Thus, the CONWEP-ALE coupling algorithm provides an effective and efficient approach for analyzing the dynamic response and failure modes of blast-loaded RC slabs.

  • Open Access

    Investigating the Spectral Characteristics of High-Temperature Gases in Low-Carbon Chemical Pool Fires and Developing a Spectral Model

    by Gengfeng Jiang, Zhili Chen, Yaquan Liang, Peng Li, Qiang Liu, Lv Zhou

    Low-carbon chemical fires pose significant hazards, and remote sensing of high-temperature gas emissions from these fires is a critical method for identifying and assessing their environmental impact. Analyzing the spectral characteristics of gases produced by low-carbon chemical pool fires and developing spectral radiation models can establish a foundation for remote pollution monitoring. However, such studies remain scarce. Using a custom-built high-temperature gas spectroscopy platform, this study extracts spectral features of gases emitted by low-carbon chemical pool fires. We investigate spectral interference mechanisms among combustion products and develop a high-precision spectral radiation model to support remote fire pollution monitoring. Experimental results reveal distinct spectral bands for key gases: CO2 peaks near 2.7 μm and 4.35 μm, SO2 at 4.05 μm, 7.5 μm, and 9.0 μm, NO at 5.5 μm, and NO2 at 3.6 μm and 6.3 μm. The proposed spectral radiation model accurately simulates the position and shape of spectral peaks. For carbon disulfide and acetonitrile combustion products, the model achieves prediction accuracies of 83.4–96.9% and 79.2–95.3%, respectively.

  • Open Access

    Hard, Bright X‐Ray Bursts in Natural Lightning: Blurring the Boundary Between X‐Ray Bursts and TGFs

    by Xiong Zhang, Yuan Wang, Peng Li, Weitao Lyu, Rubin Jiang, Yang Zhang, Yanfeng Fan, Xiaoqiang Li, Baofeng Cao

    In this study, we analyzed a rare hard, bright X‐ray burst associated with intense natural lightning. Through spectral analysis and source model fitting, we demonstrate that the energy spectrum of the X‐ray source region exhibits significant uncertainty due to the strong dependence on radiation beam geometry, which may appear as a TGF‐like hard spectrum. The X‐ray burst is estimated to produce approximately 10 13 to 10 14 source photons (>30 keV), which is 1–2 orders of magnitude higher than a typical X‐ray burst and comparable to the brightness of downward TGFs. The hard, bright X‐ray burst challenges the traditional classification boundary between soft/weak X‐rays and hard/strong TGFs, suggesting that both may exist in a continuous spectrum. The generation mechanism for such hard, bright X‐ray bursts may involve Relativistic Runaway Electron Avalanche processes, though likely in an incomplete stage.


  • Relationship Between X‐Rays and the Propagation Speed of Downward Negative Leaders in Rocket‐Triggered Lightning

    by Yuan Wang, Baofeng Cao, Yanfeng Fan, Xiaoqiang Li, Yang Zhang, Xiao Li, Zongxiang Li, Yongli Wei, Lihua Wang, Gaopeng Lu, et al.

    On 18 July 2023, X‐ray emissions associated with two rocket‐triggered lightning flashes were observed at the Field Experiment Base for Lightning Sciences, China Meteorological Administration. In this paper, the relationship between X‐ray characteristics and propagation speed of downward negative dart leaders is analyzed for the first time. Results show that within the same lightning flash, there is a strong positive correlation between the leader brightness and its 2D speed, as evidenced by a high correlation coefficient, R, of +0.94. Consistently, the intensity of X‐rays generally exhibits a positive correlation with the leader 2D speed. Conversely, the average X‐ray pulse interval is negatively correlated with the leader 2D speed, with a significant correlation coefficient, R, of −0.93. Furthermore, the intervals of partial steps of dart leader can be characterized by the intervals between the X‐ray pulses.


  • Open Access

    Positioning of Lightning Electromagnetic Radiation Sources With Satellite Constellations: Simulation and Preliminary Validation

    by Xiao Li, Zongxiang Li, Xiaoqiang Li, Xiong Zhang, Yunfen Chang, Kai Zhang, Yongli Wei, Baofeng Cao, Peng Li

    Satellites, equipped with electromagnetic sensors, can detect and locate the lightning electromagnetic radiation sources (LERS) in the thunderstorm over the globe surface of the Earth, delivering data regarding occurrence time, geolocation, and intensity. This paper presents the study on the three‐dimensional (3D) positioning of LERS utilizing a low‐Earth‐orbit (LEO) satellite constellation. A positioning algorithm was constructed, and a Monte Carlo approach was utilized to simulate positioning capabilities in a LEO satellite configuration, emphasizing the effect of time error on positioning precision. The findings demonstrate that the effective coverage and positional inaccuracies of the LERS, together with their distribution, are significantly associated with constellation configuration, satellite orbital height, and time synchronization precision. Furthermore, we verified the detecting and positioning capabilities based on the data from transmitting‐and‐receiving tests utilizing a terrestrial LERS simulator and the on‐orbit satellite SY‐15, and the positioning error is less 3 km under a certain virtual multi‐satellite constellation when accounting for ionospheric delay.