Dipankar Shakya
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Previous Organizations / Institutes
The organizations / institutes from the scholar's other articles in the past ten years
Dipankar Shakya has a total of 26 co-authors. Here are the top co-authors by number of shared publications:
- Theodore S. Rappaport
New York University
8 shared publications - Hitesh Poddar
NYU WIRELESS Research Center, NYU Tandon School of Engineering, New York University, Brooklyn, NY, USA
3 shared publications - Shihao Ju
NYU WIRELESS Research Center, NYU Tandon School of Engineering, New York University, Brooklyn, NY, USA
3 shared publications Hitesh Poddar
Sharp Laboratories of America (SLA)
2 shared publicationsIdris Al-Wazani
NYU WIRELESS, New York University Tandon School of Engineering
2 shared publications- Michael E. Knox
NYU WIRELESS, NYU Tandon School of Engineering, New York, NY, USA
2 shared publications
Latest Publications
- Open Access
- 2 August 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in TechRxiv
Comprehensive FR1(C) and FR3 lower and upper mid-band propagation and material penetration loss measurements and channel models in Indoor environment for 5G and 6G
Wide bandwidth requirements for multi-Gbps communications have prompted the global telecommunications industry to consider new mid-band spectrum allocations in the 4--8 GHz FR1(C) and 7--24 GHz FR3 bands, above the crowded bands below 6 GHz. Allocations in the lower and upper mid-band aim to balance coverage and capacity, however, there is limited knowledge about the radio propagation characteristics in the 4--24 GHz frequency bands. Here we present the world's first comprehensive propagation measurement study at 6.75 GHz and 16.95 GHz in mid-band spectrum conducted at the NYU WIRELESS Research Center spanning distances from 11--97 m using 31 dBm EIRP transmit power with 15 and 20 dBi gain rotatable horn antennas at 6.75 GHz and 16.95 GHz, respectively. Analysis of the omnidirectional and directional propagation loss using the close-in free space model with 1 m reference distance reveals a familiar waveguiding effect in indoor environments for line-of-sight (LOS). Compared to mmWave frequencies, the omnidirectional LOS and non-LOS (NLOS) path loss exponents (PLE) are similar, when using a close-in 1 m free space path loss reference distance model. Observations of the omnidirectional and directional RMS delay spread (DS) at FR1(C) and FR3 as compared to mmWave and sub-THz frequencies indicate decreasing RMS DS as the carrier frequency is increased. The RMS angular spreads (AS) at 6.75 GHz are found to be wider compared to 16.95 GHz, showing greater number of multipath components from a broader set of directions in the azimuthal spatial plane when compared to higher frequencies. This work also presents results from extensive material penetration loss measurements at 6.75 GHz and 16.95 GHz using co and cross polarized antenna configurations for ten common construction materials found inside buildings and on building perimeters, including concrete walls, low-emissivity glass, wood, doors, drywall, and whiteboard. Our findings show penetration loss increases with frequency for all of the ten materials and partitions tested, and suggest revisions of 3GPP material penetration loss models for at least infrared reflective (IRR) glass and concrete may be necessary. The empirical data and resulting models for radio propagation and penetration presented in this paper provide critical information for future 5G and 6G wireless communications.
- 2 August 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in TechRxiv
Open AccessComprehensive FR1(C) and FR3 lower and upper mid-band propagation and material penetration loss measurements and channel models in Indoor environment for 5G and 6G
Wide bandwidth requirements for multi-Gbps communications have prompted the global telecommunications industry to consider new mid-band spectrum allocations in the 4--8 GHz FR1(C) and 7--24 GHz FR3 bands, above the crowded bands below 6 GHz. Allocations in the lower and upper mid-band aim to balance coverage and capacity, however, there is limited knowledge about the radio propagation characteristics in the 4--24 GHz frequency bands. Here we present the world's first comprehensive propagation measurement study at 6.75 GHz and 16.95 GHz in mid-band spectrum conducted at the NYU WIRELESS Research Center spanning distances from 11--97 m using 31 dBm EIRP transmit power with 15 and 20 dBi gain rotatable horn antennas at 6.75 GHz and 16.95 GHz, respectively. Analysis of the omnidirectional and directional propagation loss using the close-in free space model with 1 m reference distance reveals a familiar waveguiding effect in indoor environments for line-of-sight (LOS). Compared to mmWave frequencies, the omnidirectional LOS and non-LOS (NLOS) path loss exponents (PLE) are similar, when using a close-in 1 m free space path loss reference distance model. Observations of the omnidirectional and directional RMS delay spread (DS) at FR1(C) and FR3 as compared to mmWave and sub-THz frequencies indicate decreasing RMS DS as the carrier frequency is increased. The RMS angular spreads (AS) at 6.75 GHz are found to be wider compared to 16.95 GHz, showing greater number of multipath components from a broader set of directions in the azimuthal spatial plane when compared to higher frequencies. This work also presents results from extensive material penetration loss measurements at 6.75 GHz and 16.95 GHz using co and cross polarized antenna configurations for ten common construction materials found inside buildings and on building perimeters, including concrete walls, low-emissivity glass, wood, doors, drywall, and whiteboard. Our findings show penetration loss increases with frequency for all of the ten materials and partitions tested, and suggest revisions of 3GPP material penetration loss models for at least infrared reflective (IRR) glass and concrete may be necessary. The empirical data and resulting models for radio propagation and penetration presented in this paper provide critical information for future 5G and 6G wireless communications.
- Top Cited PapersOpen Access
- 22 July 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Open Journal of the Communications Society
- Vol. 5, 5192-5218
Comprehensive FR1(C) and FR3 Lower and Upper Mid-Band Propagation and Material Penetration Loss Measurements and Channel Models in Indoor Environment for 5G and 6G
Wide bandwidth requirements for multi-Gbps communications have prompted the global telecommunications industry to consider new mid-band spectrum allocations in the 4–8 GHz FR1(C) and 7–24 GHz FR3 bands, above the crowded bands below 6 GHz. Allocations in the lower and upper mid-band aim to balance coverage and capacity, however, there is limited knowledge about the radio propagation characteristics in the 4–24 GHz frequency bands. Here we present the world’s first comprehensive propagation measurement study at 6.75 GHz and 16.95 GHz in mid-band spectrum conducted at the NYU WIRELESS Research Center spanning distances from 11–97 m using 31 dBm EIRP transmit power with 15 and 20 dBi gain rotatable horn antennas at 6.75 GHz and 16.95 GHz, respectively. Analysis of the omnidirectional and directional propagation loss using the close-in free space model with 1 m reference distance reveals a familiar waveguiding effect in indoor environments for line-of-sight (LOS). Compared to mmWave frequencies, the omnidirectional LOS and non-LOS (NLOS) path loss exponents (PLE) are similar, when using a close-in 1m free space path loss reference distance model. Observations of the omnidirectional and directional RMS delay spread (DS) at FR1(C) and FR3 as compared to mmWave and sub-THz frequencies indicate decreasing RMS DS as the carrier frequency is increased. The RMS angular spreads (AS) at 6.75 GHz are found to be wider compared to 16.95 GHz, showing greater number of multipath components from a broader set of directions in the azimuthal spatial plane when compared to higher frequencies. This work also presents results from extensive material penetration loss measurements at 6.75 GHz and 16.95 GHz using co and cross polarized antenna configurations for ten common construction materials found inside buildings and on building perimeters, including concrete walls, low-emissivity glass, wood, doors, drywall, and whiteboard. Our findings show penetration loss increases with frequency for all of the ten materials and partitions tested, and suggest revisions of 3GPP material penetration loss models for at least infrared reflective (IRR) glass and concrete may be necessary. The empirical data and resulting models for radio propagation and penetration presented in this paper provide critical information for future 5G and 6G wireless communications.
- 22 July 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Open Journal of the Communications Society
- Vol. 5, 5192-5218
Top Cited PapersOpen AccessComprehensive FR1(C) and FR3 Lower and Upper Mid-Band Propagation and Material Penetration Loss Measurements and Channel Models in Indoor Environment for 5G and 6G
Wide bandwidth requirements for multi-Gbps communications have prompted the global telecommunications industry to consider new mid-band spectrum allocations in the 4–8 GHz FR1(C) and 7–24 GHz FR3 bands, above the crowded bands below 6 GHz. Allocations in the lower and upper mid-band aim to balance coverage and capacity, however, there is limited knowledge about the radio propagation characteristics in the 4–24 GHz frequency bands. Here we present the world’s first comprehensive propagation measurement study at 6.75 GHz and 16.95 GHz in mid-band spectrum conducted at the NYU WIRELESS Research Center spanning distances from 11–97 m using 31 dBm EIRP transmit power with 15 and 20 dBi gain rotatable horn antennas at 6.75 GHz and 16.95 GHz, respectively. Analysis of the omnidirectional and directional propagation loss using the close-in free space model with 1 m reference distance reveals a familiar waveguiding effect in indoor environments for line-of-sight (LOS). Compared to mmWave frequencies, the omnidirectional LOS and non-LOS (NLOS) path loss exponents (PLE) are similar, when using a close-in 1m free space path loss reference distance model. Observations of the omnidirectional and directional RMS delay spread (DS) at FR1(C) and FR3 as compared to mmWave and sub-THz frequencies indicate decreasing RMS DS as the carrier frequency is increased. The RMS angular spreads (AS) at 6.75 GHz are found to be wider compared to 16.95 GHz, showing greater number of multipath components from a broader set of directions in the azimuthal spatial plane when compared to higher frequencies. This work also presents results from extensive material penetration loss measurements at 6.75 GHz and 16.95 GHz using co and cross polarized antenna configurations for ten common construction materials found inside buildings and on building perimeters, including concrete walls, low-emissivity glass, wood, doors, drywall, and whiteboard. Our findings show penetration loss increases with frequency for all of the ten materials and partitions tested, and suggest revisions of 3GPP material penetration loss models for at least infrared reflective (IRR) glass and concrete may be necessary. The empirical data and resulting models for radio propagation and penetration presented in this paper provide critical information for future 5G and 6G wireless communications.
- Open Access
- 18 July 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Open Journal of the Communications Society
- Vol. 5, 4839-4867
Waste Factor and Waste Figure: A Unified Theory for Modeling and Analyzing Wasted Power in Radio Access Networks for Improved Sustainability
This paper introduces Waste Factor (W), also denoted as Waste Figure (WF) in dB, a promising new metric for quantifying energy efficiency in a wide range of circuits and systems applications, including data centers and Radio Access Networks (RANs). Creating and managing 5G and future 6G networks that are energy-efficient is of paramount importance as the wireless industry evolves to become a major consumer of energy. Also, the networks used to connect data centers and artificial intelligence (AI) computing engines with users for machine learning (ML) applications must become more power efficient. This paper illustrates the limitations of existing energy efficiency metrics that inadequately capture the intricate energy dynamics of RAN components. We show here that W provides a generalized analysis of power utilization and energy waste at both the component and system levels for any source-to-sink communication system. We delineate the methodology for applying W across various network configurations, including multiple-input single-output (MISO), single-input and multiple-output (SIMO), and multiple-input multiple-output (MIMO) systems, and demonstrate the effectiveness of W in identifying energy optimization opportunities. Our findings reveal that W not only offers nuanced insights into the energy consumption of RANs but also facilitates informed decision-making for network design and operational efficiency. Furthermore, we show how W can be integrated with other key performance indicators (KPIs) and key value indicators (KVIs) to guide the development of optimal strategies for enhancing network energy efficiency under different operational conditions. Additionally, we present simulation results for a distributed multi-user MIMO (MU-MIMO) system at 3.5, 17, and 28 GHz, demonstrating overall network power efficiency on a per square kilometer basis, and show how overall W decreases (e.g., energy efficiency increases over the entire network) with an increasing number of base stations and increasing carrier frequency. This paper shows that adopting W as a figure of merit (FoM) can enable the design of more sustainable next-generation wireless communication networks, paving the way for greener and more sustainable, energy-efficient 5G and 6G technologies.
- 18 July 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Open Journal of the Communications Society
- Vol. 5, 4839-4867
Open AccessWaste Factor and Waste Figure: A Unified Theory for Modeling and Analyzing Wasted Power in Radio Access Networks for Improved Sustainability
This paper introduces Waste Factor (W), also denoted as Waste Figure (WF) in dB, a promising new metric for quantifying energy efficiency in a wide range of circuits and systems applications, including data centers and Radio Access Networks (RANs). Creating and managing 5G and future 6G networks that are energy-efficient is of paramount importance as the wireless industry evolves to become a major consumer of energy. Also, the networks used to connect data centers and artificial intelligence (AI) computing engines with users for machine learning (ML) applications must become more power efficient. This paper illustrates the limitations of existing energy efficiency metrics that inadequately capture the intricate energy dynamics of RAN components. We show here that W provides a generalized analysis of power utilization and energy waste at both the component and system levels for any source-to-sink communication system. We delineate the methodology for applying W across various network configurations, including multiple-input single-output (MISO), single-input and multiple-output (SIMO), and multiple-input multiple-output (MIMO) systems, and demonstrate the effectiveness of W in identifying energy optimization opportunities. Our findings reveal that W not only offers nuanced insights into the energy consumption of RANs but also facilitates informed decision-making for network design and operational efficiency. Furthermore, we show how W can be integrated with other key performance indicators (KPIs) and key value indicators (KVIs) to guide the development of optimal strategies for enhancing network energy efficiency under different operational conditions. Additionally, we present simulation results for a distributed multi-user MIMO (MU-MIMO) system at 3.5, 17, and 28 GHz, demonstrating overall network power efficiency on a per square kilometer basis, and show how overall W decreases (e.g., energy efficiency increases over the entire network) with an increasing number of base stations and increasing carrier frequency. This paper shows that adopting W as a figure of merit (FoM) can enable the design of more sustainable next-generation wireless communication networks, paving the way for greener and more sustainable, energy-efficient 5G and 6G technologies.
- Top Cited Papers
- 1 July 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in Proceedings of the IEEE
- Vol. 113 (9) , 920-951
The Evolution of Applications, Hardware Design, and Channel Modeling for Terahertz (THz) Band Communications and Sensing: Ready for 6G?
For decades, the terahertz (THz) frequency band had been primarily explored in the context of radar, imaging, and spectroscopy, where multi-gigahertz (GHz) and even THz-wide channels and the properties of THz photons offered attractive target accuracy, resolution, and classification capabilities. Meanwhile, the exploitation of the THz band for wireless communication had originally been limited due to several reasons:1) no immediate need for such high data rates available via THz bands and 2) challenges in designing sufficiently high-power THz systems at reasonable cost and efficiency, leading to what was often referred to as “the THz gap.” Over the recent decade, advances on many fronts have drastically changed the THz landscape. First, the evolution from 5G-to 6G-grade wireless systems dictates the need to support novel bandwidth-hungry applications and services for both data transfer i.e., eXtended Reality (XR), the Metaverse, and vast modeling needs of artificial intelligence (AI) and machine learning (ML), as well as centimeter-precision sensing and classification (i.e., for standalone position location, vehicle-to-everything (V2X), or unmanned aerial vehicle (UAV) tracking). Second, substantial progress in THz hardware has been achieved, offering promise that the THz technology gap will be closed. Hence, THz-band wireless communication seems inevitably an essential part of the future networking technology landscape in the coming decades. To design efficient THz systems, the peculiarities of THz hardware and THz channels need to be understood and accounted for. This roadmap paper first reviews the evolution of the hardware design approaches for THz systems, including electronic, photonic, and plasmonic approaches, and the understanding of the THz channel itself, in diverse scenarios, ranging from common indoors and outdoors scenarios to intrabody and outer space environments. This article then summarizes the lessons learned during this multidecade process and the cutting-edge state-of-the-art findings, including novel methods to quantify power efficiency, which will become more important in making design choices. Finally, this article presents the authors’ perspective and insights on how the evolution of THz systems design will continue toward enabling efficient THz communications and sensing solutions as an integral part of next-generation wireless systems.
- 1 July 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in Proceedings of the IEEE
- Vol. 113 (9) , 920-951
Top Cited PapersThe Evolution of Applications, Hardware Design, and Channel Modeling for Terahertz (THz) Band Communications and Sensing: Ready for 6G?
For decades, the terahertz (THz) frequency band had been primarily explored in the context of radar, imaging, and spectroscopy, where multi-gigahertz (GHz) and even THz-wide channels and the properties of THz photons offered attractive target accuracy, resolution, and classification capabilities. Meanwhile, the exploitation of the THz band for wireless communication had originally been limited due to several reasons:1) no immediate need for such high data rates available via THz bands and 2) challenges in designing sufficiently high-power THz systems at reasonable cost and efficiency, leading to what was often referred to as “the THz gap.” Over the recent decade, advances on many fronts have drastically changed the THz landscape. First, the evolution from 5G-to 6G-grade wireless systems dictates the need to support novel bandwidth-hungry applications and services for both data transfer i.e., eXtended Reality (XR), the Metaverse, and vast modeling needs of artificial intelligence (AI) and machine learning (ML), as well as centimeter-precision sensing and classification (i.e., for standalone position location, vehicle-to-everything (V2X), or unmanned aerial vehicle (UAV) tracking). Second, substantial progress in THz hardware has been achieved, offering promise that the THz technology gap will be closed. Hence, THz-band wireless communication seems inevitably an essential part of the future networking technology landscape in the coming decades. To design efficient THz systems, the peculiarities of THz hardware and THz channels need to be understood and accounted for. This roadmap paper first reviews the evolution of the hardware design approaches for THz systems, including electronic, photonic, and plasmonic approaches, and the understanding of the THz channel itself, in diverse scenarios, ranging from common indoors and outdoors scenarios to intrabody and outer space environments. This article then summarizes the lessons learned during this multidecade process and the cutting-edge state-of-the-art findings, including novel methods to quantify power efficiency, which will become more important in making design choices. Finally, this article presents the authors’ perspective and insights on how the evolution of THz systems design will continue toward enabling efficient THz communications and sensing solutions as an integral part of next-generation wireless systems.
- Open Access
- 23 February 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Antennas and Propagation
- Vol. 72 (4) , 3580-3595
Radio Propagation Measurements and Statistical Channel Models for Outdoor Urban Microcells in Open Squares and Streets at 142, 73, and 28 GHz
A comprehensive understanding of outdoor urban radio propagation at mmWave and sub-THz frequencies is crucial for enabling novel applications such as wireless cognition, precise position-location, and sensing. This paper summarizes extensive measurements and statistical analysis of outdoor radio propagation data collected in New York City between 2012 and 2021 to formulate a multi-band empirical 3-D statistical channel model (SCM) for outdoor urban open squares and streets. Path loss models and SCMs are derived from over 21000 power delay profiles (PDP) measured in Brooklyn and Manhattan. Analysis of multipath components in PDPs reveal underlying statistical distributions for wireless channel parameters, including number of time-clusters (TC), subpaths in TCs, delays and powers of TCs and subpaths, and spatial-cluster directions. Observations at 142 GHz suggest a sparse channel as subpaths in TCs are exponentially distributed with narrower spread spatial-clusters and higher Ricean K-factor, unlike uniform distributions at 28 and 73 GHz. The proposed SCMs at 142, 73, and 28 GHz extend the open-source NYUSIM channel simulator into sub-THz bands up to 150 GHz. The SCMs can aid in designing modems, antenna arrays, beamforming, and spatial multiplexing approaches, while providing an empirical baseline for propagation simulation and prediction tools, such as ray tracers.
- 23 February 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Antennas and Propagation
- Vol. 72 (4) , 3580-3595
Open AccessRadio Propagation Measurements and Statistical Channel Models for Outdoor Urban Microcells in Open Squares and Streets at 142, 73, and 28 GHz
A comprehensive understanding of outdoor urban radio propagation at mmWave and sub-THz frequencies is crucial for enabling novel applications such as wireless cognition, precise position-location, and sensing. This paper summarizes extensive measurements and statistical analysis of outdoor radio propagation data collected in New York City between 2012 and 2021 to formulate a multi-band empirical 3-D statistical channel model (SCM) for outdoor urban open squares and streets. Path loss models and SCMs are derived from over 21000 power delay profiles (PDP) measured in Brooklyn and Manhattan. Analysis of multipath components in PDPs reveal underlying statistical distributions for wireless channel parameters, including number of time-clusters (TC), subpaths in TCs, delays and powers of TCs and subpaths, and spatial-cluster directions. Observations at 142 GHz suggest a sparse channel as subpaths in TCs are exponentially distributed with narrower spread spatial-clusters and higher Ricean K-factor, unlike uniform distributions at 28 and 73 GHz. The proposed SCMs at 142, 73, and 28 GHz extend the open-source NYUSIM channel simulator into sub-THz bands up to 150 GHz. The SCMs can aid in designing modems, antenna arrays, beamforming, and spatial multiplexing approaches, while providing an empirical baseline for propagation simulation and prediction tools, such as ray tracers.
- 10 January 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Microwave Magazine
- Vol. 25 (2) , 68-79
Exploring Millimeter-Wave and Terahertz Circuits and Systems With a Novel Multiuser Measurement Facility: Multiuser Terahertz Measurement Facility (THz Lab)
A new multiuser terahertz (THz) measurement facility, or “ THz Lab ,” located at the New York University (NYU) wireless research center, develops a next-generation laboratory to enable pioneering research at the upper reaches of the radio spectrum: the sub-THz (100–300 GHz) and THz (0.3–3 THz) frequency bands. The cellular telephone industry’s recent realization of the viability of the millimeter wave (mm-wave) radio spectrum for 5G has created a need for the next-generation measurement platform that can promote foundational research for wireless communications, circuit design, antennas and propagation, and novel materials into the 6G era and beyond [1] . The THz Lab , funded by a US$3 million National Science Foundation (NSF): Major Research Instrumentation (MRI) grant, explores the spectrum frontier at frequencies from the mm-wave and into the THz bands, where material and propagation properties are not well known but which offer great promise for massively wideband channels and yet-to-be-determined capabilities of future cell phones, autonomous vehicles, and smart devices. Since the U.S. Federal Communications Commission authorized using sub-THz frequencies above 95 GHz for the first time in 2019 [2] , other countries are also now opening these high-frequency bands. Notably, Ofcom in the United Kingdom and other European nations through the European Union’s Horizon 2020 have begun exploring spectrum sharing and device innovations for applications at the THz frequencies [3] , [4] . Similarly, spectrum regulators in Canada and Australia are actively exploring applications and use cases at sub-THz and THz frequencies [5] , [6] . The costs and technical challenges to accurately design and repeatably measure devices and radio systems at these frequencies are tremendous. However, little is known about how to best design such systems, let alone characterize them and make them work reliably. The THz Lab enables fundamental explorations of circuits, antennas, radio propagation, and materials at the THz level for applications involving sensing and communications in emerging 6G wireless networks and beyond.
- 10 January 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Microwave Magazine
- Vol. 25 (2) , 68-79
Exploring Millimeter-Wave and Terahertz Circuits and Systems With a Novel Multiuser Measurement Facility: Multiuser Terahertz Measurement Facility (THz Lab)
A new multiuser terahertz (THz) measurement facility, or “ THz Lab ,” located at the New York University (NYU) wireless research center, develops a next-generation laboratory to enable pioneering research at the upper reaches of the radio spectrum: the sub-THz (100–300 GHz) and THz (0.3–3 THz) frequency bands. The cellular telephone industry’s recent realization of the viability of the millimeter wave (mm-wave) radio spectrum for 5G has created a need for the next-generation measurement platform that can promote foundational research for wireless communications, circuit design, antennas and propagation, and novel materials into the 6G era and beyond [1] . The THz Lab , funded by a US$3 million National Science Foundation (NSF): Major Research Instrumentation (MRI) grant, explores the spectrum frontier at frequencies from the mm-wave and into the THz bands, where material and propagation properties are not well known but which offer great promise for massively wideband channels and yet-to-be-determined capabilities of future cell phones, autonomous vehicles, and smart devices. Since the U.S. Federal Communications Commission authorized using sub-THz frequencies above 95 GHz for the first time in 2019 [2] , other countries are also now opening these high-frequency bands. Notably, Ofcom in the United Kingdom and other European nations through the European Union’s Horizon 2020 have begun exploring spectrum sharing and device innovations for applications at the THz frequencies [3] , [4] . Similarly, spectrum regulators in Canada and Australia are actively exploring applications and use cases at sub-THz and THz frequencies [5] , [6] . The costs and technical challenges to accurately design and repeatably measure devices and radio systems at these frequencies are tremendous. However, little is known about how to best design such systems, let alone characterize them and make them work reliably. The THz Lab enables fundamental explorations of circuits, antennas, radio propagation, and materials at the THz level for applications involving sensing and communications in emerging 6G wireless networks and beyond.
- Top Cited PapersOpen Access
- 21 December 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Communications Surveys & Tutorials
- Vol. 26 (2) , 824-857
A Tutorial on NYUSIM: Sub-Terahertz and Millimeter-Wave Channel Simulator for 5G, 6G, and Beyond
With the advancement of wireless communication to sub-terahertz (THz) and millimeter-wave (mmWave) bands, accurate channel models and simulation tools are becoming increasingly important for modeling a wide range of frequencies and scenarios. This paper provides a comprehensive tutorial on generating drop-based and spatial consistency-based channels using the open-source MATLAB-based NYU Channel Model Simulator (NYUSIM). NYUSIM is built on extensive real-world radio propagation measurements for the frequency range of 0.5-150 GHz, covering a variety of scenarios such as Urban Microcell (UMi), Urban Macrocell (UMa), Rural Macrocell (RMa), Indoor Hotspot (InH), and Indoor Factory (InF). Additionally, an overview of the evolution of simulators used to design and analyze wireless systems since the early days of cellular communication is also provided. We introduce the most popular types of simulators used in academia and industry, such as Channel Simulators (CSs), Link Level Simulators (LLSs), System Level Simulators (SLSs), and Network Simulators (NSs), to study wireless communication systems for 5G and beyond. Owing to the widespread adoption of the 3rd Generation Partnership Project (3GPP) Stochastic Channel Model (SCM) for channel generation in various simulators, we conduct a comparative analysis between the 3GPP SCM and NYUSIM channel model to highlight their differences. Moreover, NYUSIM’s versatility extends beyond its MATLAB implementation, as it can be implemented in various LLSs, SLSs, and NSs, enabling researchers to incorporate real-world measurement-based channels into their simulations. To illustrate this capability, we showcase NYUSIM’s implementation in ns-3, a widely used open-source discrete event network simulator. Additionally, we provide several applications of NYUSIM to highlight its potential uses.
- 21 December 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Communications Surveys & Tutorials
- Vol. 26 (2) , 824-857
Top Cited PapersOpen AccessA Tutorial on NYUSIM: Sub-Terahertz and Millimeter-Wave Channel Simulator for 5G, 6G, and Beyond
With the advancement of wireless communication to sub-terahertz (THz) and millimeter-wave (mmWave) bands, accurate channel models and simulation tools are becoming increasingly important for modeling a wide range of frequencies and scenarios. This paper provides a comprehensive tutorial on generating drop-based and spatial consistency-based channels using the open-source MATLAB-based NYU Channel Model Simulator (NYUSIM). NYUSIM is built on extensive real-world radio propagation measurements for the frequency range of 0.5-150 GHz, covering a variety of scenarios such as Urban Microcell (UMi), Urban Macrocell (UMa), Rural Macrocell (RMa), Indoor Hotspot (InH), and Indoor Factory (InF). Additionally, an overview of the evolution of simulators used to design and analyze wireless systems since the early days of cellular communication is also provided. We introduce the most popular types of simulators used in academia and industry, such as Channel Simulators (CSs), Link Level Simulators (LLSs), System Level Simulators (SLSs), and Network Simulators (NSs), to study wireless communication systems for 5G and beyond. Owing to the widespread adoption of the 3rd Generation Partnership Project (3GPP) Stochastic Channel Model (SCM) for channel generation in various simulators, we conduct a comparative analysis between the 3GPP SCM and NYUSIM channel model to highlight their differences. Moreover, NYUSIM’s versatility extends beyond its MATLAB implementation, as it can be implemented in various LLSs, SLSs, and NSs, enabling researchers to incorporate real-world measurement-based channels into their simulations. To illustrate this capability, we showcase NYUSIM’s implementation in ns-3, a widely used open-source discrete event network simulator. Additionally, we provide several applications of NYUSIM to highlight its potential uses.
- Open Access
- 6 December 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Wireless Communications
- Vol. 23 (7) , 7127-7143
142 GHz Sub-Terahertz Radio Propagation Measurements and Channel Characterization in Factory Buildings
This paper presents sub-Terahertz (THz) channel characterization and modeling for an indoor industrial scenario based on radio propagation measurements at 142 GHz in four factories. We selected 82 transmitter-receiver (TX-RX) locations in both line-of-sight (LOS) and non-LOS (NLOS) conditions and collected over 75,000 spatial and temporal channel impulse responses. The TX-RX distance ranged from 5 to 87 m. Steerable directional horn antennas were employed at both ends and were switched between vertical and horizontal polarization. Measurements were conducted with the low RX and high RX to characterize the propagation channel for close-to-floor applications such as automated guided vehicles. Results show that the low RXs experience an average path loss increase of 10.7 dB and 6.0 dB at LOS and NLOS locations, respectively. In addition, channel enhancement measurements were conducted using a steerable large flat metal plate as a passive reflecting surface, demonstrating omnidirectional path loss reduction from 0.5 to 22 dB with a mean of 6.5 dB. This paper presents the first statistical channel characterization and path loss modeling at sub-THz frequencies, highlighting the potential for ultra-broadband factory communications in the 6G era.
- 6 December 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Wireless Communications
- Vol. 23 (7) , 7127-7143
Open Access142 GHz Sub-Terahertz Radio Propagation Measurements and Channel Characterization in Factory Buildings
This paper presents sub-Terahertz (THz) channel characterization and modeling for an indoor industrial scenario based on radio propagation measurements at 142 GHz in four factories. We selected 82 transmitter-receiver (TX-RX) locations in both line-of-sight (LOS) and non-LOS (NLOS) conditions and collected over 75,000 spatial and temporal channel impulse responses. The TX-RX distance ranged from 5 to 87 m. Steerable directional horn antennas were employed at both ends and were switched between vertical and horizontal polarization. Measurements were conducted with the low RX and high RX to characterize the propagation channel for close-to-floor applications such as automated guided vehicles. Results show that the low RXs experience an average path loss increase of 10.7 dB and 6.0 dB at LOS and NLOS locations, respectively. In addition, channel enhancement measurements were conducted using a steerable large flat metal plate as a passive reflecting surface, demonstrating omnidirectional path loss reduction from 0.5 to 22 dB with a mean of 6.5 dB. This paper presents the first statistical channel characterization and path loss modeling at sub-THz frequencies, highlighting the potential for ultra-broadband factory communications in the 6G era.
- Open Access
- 7 June 2021
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Circuits and Systems II: Express Briefs
- Vol. 68 (9) , 3043-3047
A Wideband Sliding Correlation Channel Sounder in 65 nm CMOS: Evaluation Board Performance
Emerging applications such as wireless sensing, position location, robotics, and many more are driven by the ultra-wide bandwidths available at millimeter-wave (mmWave) and Terahertz (THz) frequencies. The characterization and efficient utilization of wireless channels at these extremely high frequencies require detailed knowledge of the radio propagation characteristics of the channels. Such knowledge is developed through empirical observations of operating conditions using wireless transceivers that measure the impulse response through channel sounding. Today, cutting-edge channel sounders rely on several bulky RF hardware components with complicated interconnections, large parasitics, and sub-GHz RF bandwidth. This brief presents a compact sliding correlation-based channel sounder baseband built on a monolithic integrated circuit (IC) using 65 nm CMOS, implemented as an evaluation board achieving a 2 GHz RF bandwidth. The IC is the world's first gigabit-per-second channel sounder baseband implemented in low-cost CMOS. The presented single-board system can be employed at both the transmit and receive baseband to study multipath characteristics and path loss. Thus, the single-board implementation provides an inexpensive and compact solution for sliding correlation-based channel sounding with 1 ns multipath delay resolution.
- 7 June 2021
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Circuits and Systems II: Express Briefs
- Vol. 68 (9) , 3043-3047
Open AccessA Wideband Sliding Correlation Channel Sounder in 65 nm CMOS: Evaluation Board Performance
Emerging applications such as wireless sensing, position location, robotics, and many more are driven by the ultra-wide bandwidths available at millimeter-wave (mmWave) and Terahertz (THz) frequencies. The characterization and efficient utilization of wireless channels at these extremely high frequencies require detailed knowledge of the radio propagation characteristics of the channels. Such knowledge is developed through empirical observations of operating conditions using wireless transceivers that measure the impulse response through channel sounding. Today, cutting-edge channel sounders rely on several bulky RF hardware components with complicated interconnections, large parasitics, and sub-GHz RF bandwidth. This brief presents a compact sliding correlation-based channel sounder baseband built on a monolithic integrated circuit (IC) using 65 nm CMOS, implemented as an evaluation board achieving a 2 GHz RF bandwidth. The IC is the world's first gigabit-per-second channel sounder baseband implemented in low-cost CMOS. The presented single-board system can be employed at both the transmit and receive baseband to study multipath characteristics and path loss. Thus, the single-board implementation provides an inexpensive and compact solution for sliding correlation-based channel sounding with 1 ns multipath delay resolution.