P. S. N. S. R. Srikar
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
P. S. N. S. R. Srikar has a total of 20 co-authors. Here are the top co-authors by number of shared publications:
- Reetesh Kumar Gangwar
Indian Institute of Technology Tirupati
7 shared publications - Indhu Suresh
Department of Physics & CAMOST, Indian Institute of Technology Tirupati, Yerpedu 517619, India
3 shared publications - Anand M. Shivapuji
Centre for Sustainable Technologies, Indian Institute of Science, Bengaluru, India
2 shared publications - Ananthanarasimhan Jayanarasimhan
Centre for Sustainable Technologies, Indian Institute of Science, Bengaluru 560012, India
2 shared publications - P. Leelesh
Centre for Sustainable Technologies, Indian Institute of Science, Bengaluru 560012, India
2 shared publications R Srivastava
Department of Physics, Indian Institute of Technology Roorkee, Roorkee 247667, India
2 shared publications
Latest Publications
- 8 October 2025
- Published by IOP Publishing in Journal of Physics D: Applied Physics
- Vol. 58 (41) , 415204
Machine learning-enabled prediction of optical emission spectra in scalable non-thermal Ar atmospheric pressure plasma multi jet
In this study, an Ar-multi-non-thermal atmospheric pressure plasma jet system was designed and fabricated to explore its scalability for large-volume processing. Optical emission spectroscopy measurements were conducted as a function of various operating parameters, including gas flow rate, voltage, duty cycle, and % air. The measurements revealed strong emissions from Ar I, originating from fine-structure transitions among the 3 p 5 4 p → 3 p 5 4 s levels within the 690–810 nm wavelength range. Additionally, significant emissions were observed from the OH rotational band ( A 2 Σ + → X 2 Π ) at 309 nm, the N2 second positive system ( C 3 Π u → B 3 Π g ) between 330 nm and 380 nm, and atomic oxygen ( 2 s 2 2 p 3 ( 4 S 0 ) 3 p 5 P → 2 s 2 2 p 3 ( 4 S 0 ) 3 s 5 S 0 ) at 777.5 nm, providing valuable insights into reactive chemical species formation. To analyze the influence of operating conditions on these emissions and their impact on reactive species production, a data-driven machine learning (ML) approach was employed, leveraging a combination of dimensionality reduction and supervised learning. Principal component analysis was first applied to reduce data dimensionality, enhancing computational efficiency while preserving essential spectral features. Subsequently, two supervised ML models, Random Forest and deep neural networks, were trained to map input conditions to predicted emission intensities. To further exploit the predictive capability of these models, a differential evolution optimization strategy was implemented to estimate the optimal combinations of input parameters that maximize specific spectral features, particularly OH(A–X) emission. This study contributes to the development of more efficient and accelerated plasma diagnostic approaches, with the potential for real-time predictions.
- 8 October 2025
- Published by IOP Publishing in Journal of Physics D: Applied Physics
- Vol. 58 (41) , 415204
Machine learning-enabled prediction of optical emission spectra in scalable non-thermal Ar atmospheric pressure plasma multi jet
In this study, an Ar-multi-non-thermal atmospheric pressure plasma jet system was designed and fabricated to explore its scalability for large-volume processing. Optical emission spectroscopy measurements were conducted as a function of various operating parameters, including gas flow rate, voltage, duty cycle, and % air. The measurements revealed strong emissions from Ar I, originating from fine-structure transitions among the 3 p 5 4 p → 3 p 5 4 s levels within the 690–810 nm wavelength range. Additionally, significant emissions were observed from the OH rotational band ( A 2 Σ + → X 2 Π ) at 309 nm, the N2 second positive system ( C 3 Π u → B 3 Π g ) between 330 nm and 380 nm, and atomic oxygen ( 2 s 2 2 p 3 ( 4 S 0 ) 3 p 5 P → 2 s 2 2 p 3 ( 4 S 0 ) 3 s 5 S 0 ) at 777.5 nm, providing valuable insights into reactive chemical species formation. To analyze the influence of operating conditions on these emissions and their impact on reactive species production, a data-driven machine learning (ML) approach was employed, leveraging a combination of dimensionality reduction and supervised learning. Principal component analysis was first applied to reduce data dimensionality, enhancing computational efficiency while preserving essential spectral features. Subsequently, two supervised ML models, Random Forest and deep neural networks, were trained to map input conditions to predicted emission intensities. To further exploit the predictive capability of these models, a differential evolution optimization strategy was implemented to estimate the optimal combinations of input parameters that maximize specific spectral features, particularly OH(A–X) emission. This study contributes to the development of more efficient and accelerated plasma diagnostic approaches, with the potential for real-time predictions.
- 25 November 2024
- Published by Elsevier in Chemosphere
- Vol. 368, 143775
Treatment of textile dyes in a photo-surface dielectric barrier discharge hybrid reactor: Unraveling the degradation mechanisms
- 25 November 2024
- Published by Elsevier in Chemosphere
- Vol. 368, 143775
Treatment of textile dyes in a photo-surface dielectric barrier discharge hybrid reactor: Unraveling the degradation mechanisms
- Open Access
- 1 November 2024
- Published by AIP Publishing in Physics of Plasmas
- Vol. 31 (11)
Integration of ML methods with CR model-based optical diagnostic for the estimation of electron temperature in Ga laser produced plasma
Accelerated diagnostic of plasma plays a significant role in controlling and optimizing plasma-mediated processing, particularly for plasma with higher temporal and spatial gradients, such as laser produced plasma (LPP). In the present work, two advanced machine learning (ML) algorithms, random forest regression, and gradient boosting regression are integrated with noninvasive collisional radiative (CR) model-based optical diagnostics to facilitate accurate diagnostics. A comprehensive fine-structure resolved CR model framework is developed by incorporating our consistent cross section data obtained from the Relativistic Distorted Wave method [Suresh et al., “Fully relativistic distorted wave calculations of electron impact excitation of gallium atom: Cross sections relevant for plasma kinetic modelling,” Spectrochim. Acta B: At. Spectrosc. 213, 106860 (2024)]. An extensive dataset of CR model simulated intensities is created to train and test the ML methods. The present CR model is applied to characterize the Gallium LPP coupling with the optical emission spectroscopic measurements of Guo et al. [“Time-resolved spectroscopy analysis of Ga atom in laser induced plasma,” Laser Phys. 19, 1832–1837 (2009)] at different delay times. Further, a detailed correlation study of the line intensity ratios is performed to observe the qualitative behavior of the plasma parameters. The electron temperature results obtained from the CR model, ML, and line ratio methods were compared and found to be in excellent agreement. Overall, the present study demonstrates diagnostic approaches that can benefit the LPP community significantly by providing a rapid understanding of the plasma behavior across various operating conditions.
- 1 November 2024
- Published by AIP Publishing in Physics of Plasmas
- Vol. 31 (11)
Open AccessIntegration of ML methods with CR model-based optical diagnostic for the estimation of electron temperature in Ga laser produced plasma
Accelerated diagnostic of plasma plays a significant role in controlling and optimizing plasma-mediated processing, particularly for plasma with higher temporal and spatial gradients, such as laser produced plasma (LPP). In the present work, two advanced machine learning (ML) algorithms, random forest regression, and gradient boosting regression are integrated with noninvasive collisional radiative (CR) model-based optical diagnostics to facilitate accurate diagnostics. A comprehensive fine-structure resolved CR model framework is developed by incorporating our consistent cross section data obtained from the Relativistic Distorted Wave method [Suresh et al., “Fully relativistic distorted wave calculations of electron impact excitation of gallium atom: Cross sections relevant for plasma kinetic modelling,” Spectrochim. Acta B: At. Spectrosc. 213, 106860 (2024)]. An extensive dataset of CR model simulated intensities is created to train and test the ML methods. The present CR model is applied to characterize the Gallium LPP coupling with the optical emission spectroscopic measurements of Guo et al. [“Time-resolved spectroscopy analysis of Ga atom in laser induced plasma,” Laser Phys. 19, 1832–1837 (2009)] at different delay times. Further, a detailed correlation study of the line intensity ratios is performed to observe the qualitative behavior of the plasma parameters. The electron temperature results obtained from the CR model, ML, and line ratio methods were compared and found to be in excellent agreement. Overall, the present study demonstrates diagnostic approaches that can benefit the LPP community significantly by providing a rapid understanding of the plasma behavior across various operating conditions.
- 9 July 2024
- Published by IOP Publishing in Journal of Physics D: Applied Physics
- Vol. 57 (39) , 395204
Development of efficient nonthermal atmospheric-pressure Ar-plasma jet through simultaneous spectroscopic characterization and radical quantification
The work investigates the correlation between the plasma characteristics and reactive chemical species generation in an Ar-nonthermal atmospheric pressure plasma-jet (Ar-NTAPPJ) under various operating conditions such as gas flow rate, excitation voltage, and electrode gap and demonstrates the application of such understanding in developing efficient nonthermal plasma systems. The critical plasma parameters such as electron temperature (T e) and electron density (n e) under the various operating conditions were estimated using optical emission spectroscopy coupled with the collision radiative model and Stark broadening methods. At optimal setting of 5 LPM gas flow rate, 4 kV excitation voltage, and 6 mm electrode gap resulted in maximum T e (0.6 eV), enhancing •OH production (0.056 mM) in the liquid phase and OH(A-X) emission in the gas phase, highlighting the significance of operating conditions on building energy efficient plasma systems. The enhanced performance of the optimized Ar-NTAPPJ is demonstrated by taking atrazine as a model herbicide. The degradation performance data was correlated and validated with results obtained from spectroscopic diagnostics. By adequately tuning the operating parameters, four times enhancement in energy yield (∼150 mg kWh−1) was obtained without perturbing the nonthermal plasma mode. In nonthermal mode, to best of the authors knowledge, it is the highest reported energy yield for atrazine degradation. The scalability aspect of the present plasma jet was also investigated by Intensified Charge-Coupled Device camera-based imaging technique. The study establishes the importance of adequate diagnostics in developing efficient next-generation plasma reactors.
- 9 July 2024
- Published by IOP Publishing in Journal of Physics D: Applied Physics
- Vol. 57 (39) , 395204
Development of efficient nonthermal atmospheric-pressure Ar-plasma jet through simultaneous spectroscopic characterization and radical quantification
The work investigates the correlation between the plasma characteristics and reactive chemical species generation in an Ar-nonthermal atmospheric pressure plasma-jet (Ar-NTAPPJ) under various operating conditions such as gas flow rate, excitation voltage, and electrode gap and demonstrates the application of such understanding in developing efficient nonthermal plasma systems. The critical plasma parameters such as electron temperature (T e) and electron density (n e) under the various operating conditions were estimated using optical emission spectroscopy coupled with the collision radiative model and Stark broadening methods. At optimal setting of 5 LPM gas flow rate, 4 kV excitation voltage, and 6 mm electrode gap resulted in maximum T e (0.6 eV), enhancing •OH production (0.056 mM) in the liquid phase and OH(A-X) emission in the gas phase, highlighting the significance of operating conditions on building energy efficient plasma systems. The enhanced performance of the optimized Ar-NTAPPJ is demonstrated by taking atrazine as a model herbicide. The degradation performance data was correlated and validated with results obtained from spectroscopic diagnostics. By adequately tuning the operating parameters, four times enhancement in energy yield (∼150 mg kWh−1) was obtained without perturbing the nonthermal plasma mode. In nonthermal mode, to best of the authors knowledge, it is the highest reported energy yield for atrazine degradation. The scalability aspect of the present plasma jet was also investigated by Intensified Charge-Coupled Device camera-based imaging technique. The study establishes the importance of adequate diagnostics in developing efficient next-generation plasma reactors.
- 1 July 2023
- Published by IOP Publishing in Plasma Sources Science and Technology
- Vol. 32 (7) , 075006
Relativistic calculation of electron impact excitation of tin: cross sections of importance in plasma modeling
The present work includes the calculation of electron impact excitation cross sections for the fine structure resolved transitions in Sn I and Sn II, using the relativistic distorted wave approximation with the aid of Dirac-Fock multiconfigurational wavefunctions. For Sn I, the cross sections are calculated for the excitations from the fine structure resolved energy levels of the manifolds, 5 s 2 5 p 2 , 5 p 6 s , 5 p 5 d , and 5 p 6 p including the ground state, 5 s 2 5 p 2 ( 3 P 0 ) to the fine structure resolved levels of 5 s 2 5 p 2 , 5 p 6 [ s , p , d , f ] , 5 p 4 f , 5 p 5 [ d , f , g ] , and 5 p 7 [ s , p , d , f ] manifolds for a wide range of projectile electron energy from 0 to 500 eV. Further, the cross sections are also calculated for the excitations of Sn II from the fine structure resolved energy levels of the manifolds, 5 s 2 5 p , 5 s 5 p 2 , 5 s 2 6 s , 5 s 2 5 d and 5 s 2 6 p including the ground state, 5 s 2 5 p ( 2 P 1 / 2 ) to the fine structure resolved levels of 5 s 5 p 2 , 5 s 2 6 [ s , p , d ] , 5 s 2 5 d , 5 s 2 7 [ s , p , d ] , and 5 s 2 8 [ s , p , d ] manifolds. All the cross sections for Sn I except for the excitation from the ground state 5 s 2 5 p 2 ( 3 P 0 ) to the fine-structure resolved excited states of 5 s 2 5 p 2 , 5 p 6 [ s , p ] and 5 p 5 d manifolds and all the cross sections for Sn II are reported for the first time. In order to ensure the consistency of the present calculations, a comparison of the oscillator strengths and transition probabilities is carried out with the available calculations and measurements. The present cross sections are also compared with previous calculations and observed to be in reasonable agreement. The calculated cross sections are of great interest in the modeling and diagnostic of various plasmas such as laser induced plasma, fusion plasma, etc. Further, to ease the use of calculated cross sections, the analytic fitting of the cross sections is also provided.
- 1 July 2023
- Published by IOP Publishing in Plasma Sources Science and Technology
- Vol. 32 (7) , 075006
Relativistic calculation of electron impact excitation of tin: cross sections of importance in plasma modeling
The present work includes the calculation of electron impact excitation cross sections for the fine structure resolved transitions in Sn I and Sn II, using the relativistic distorted wave approximation with the aid of Dirac-Fock multiconfigurational wavefunctions. For Sn I, the cross sections are calculated for the excitations from the fine structure resolved energy levels of the manifolds, 5 s 2 5 p 2 , 5 p 6 s , 5 p 5 d , and 5 p 6 p including the ground state, 5 s 2 5 p 2 ( 3 P 0 ) to the fine structure resolved levels of 5 s 2 5 p 2 , 5 p 6 [ s , p , d , f ] , 5 p 4 f , 5 p 5 [ d , f , g ] , and 5 p 7 [ s , p , d , f ] manifolds for a wide range of projectile electron energy from 0 to 500 eV. Further, the cross sections are also calculated for the excitations of Sn II from the fine structure resolved energy levels of the manifolds, 5 s 2 5 p , 5 s 5 p 2 , 5 s 2 6 s , 5 s 2 5 d and 5 s 2 6 p including the ground state, 5 s 2 5 p ( 2 P 1 / 2 ) to the fine structure resolved levels of 5 s 5 p 2 , 5 s 2 6 [ s , p , d ] , 5 s 2 5 d , 5 s 2 7 [ s , p , d ] , and 5 s 2 8 [ s , p , d ] manifolds. All the cross sections for Sn I except for the excitation from the ground state 5 s 2 5 p 2 ( 3 P 0 ) to the fine-structure resolved excited states of 5 s 2 5 p 2 , 5 p 6 [ s , p ] and 5 p 5 d manifolds and all the cross sections for Sn II are reported for the first time. In order to ensure the consistency of the present calculations, a comparison of the oscillator strengths and transition probabilities is carried out with the available calculations and measurements. The present cross sections are also compared with previous calculations and observed to be in reasonable agreement. The calculated cross sections are of great interest in the modeling and diagnostic of various plasmas such as laser induced plasma, fusion plasma, etc. Further, to ease the use of calculated cross sections, the analytic fitting of the cross sections is also provided.
- 1 September 2022
- Published by IOP Publishing in Plasma Sources Science and Technology
- Vol. 31 (9) , 095016
Electron impact excitation cross section calculations of the fine structure transitions of Mo and their applications in the diagnostics of the laser induced Mo plasma
The current work reports a detailed calculation of electron impact excitation cross sections for the fine structure transitions of Mo from the manifolds 4 d 5 5 s , 4 d 4 5 s 2 , 4 d 6 and 4 d 5 5 p to the manifolds 4 d 5 5 s , 4 d 4 5 s 2 , 4 d 6 , 4 d 5 5 p , 4 d 4 5 s 5 p , 4 d 5 5 d , 4 d 5 6 s , 4 d 4 5 s 6 s , and 4 d 5 7 s , using the relativistic distorted wave approximation for the applications in plasma modelling. Multi-configurational Dirac–Fock wave functions are used in the calculations. The oscillator strength and cross section results are compared with the previous calculations and measurements. A comprehensive collisional radiative (CR) model is developed and used to characterize laser induced molybdenum plasma to ensure that the calculated cross sections can be used for various plasma modelling applications. The current CR model has taken into account the electron impact excitation and de-excitation processes using the calculated consistent cross sections. The electron induced processes are dominant kinetic processes in the laser induced plasma. Furthermore, the diagnostics of the laser induced Mo plasma is done by coupling the current CR model with the experimental laser induced breakdown spectroscopic measurements of Mal et al (2021 Appl . Phys . B 127 52). The plasma parameter, i.e., electron temperature has been calculated using nine measured intensities of the emission lines of Mo, with wavelengths 406.9, 423.3, 438.2, 453.7, 476.0, 550.7, 553.3, 557.0 and 592.9 nm. The results are also compared with the values reported in the Boltzmann plot at various delay times ranging from 0.5 to 5.0 μ s.
- 1 September 2022
- Published by IOP Publishing in Plasma Sources Science and Technology
- Vol. 31 (9) , 095016
Electron impact excitation cross section calculations of the fine structure transitions of Mo and their applications in the diagnostics of the laser induced Mo plasma
The current work reports a detailed calculation of electron impact excitation cross sections for the fine structure transitions of Mo from the manifolds 4 d 5 5 s , 4 d 4 5 s 2 , 4 d 6 and 4 d 5 5 p to the manifolds 4 d 5 5 s , 4 d 4 5 s 2 , 4 d 6 , 4 d 5 5 p , 4 d 4 5 s 5 p , 4 d 5 5 d , 4 d 5 6 s , 4 d 4 5 s 6 s , and 4 d 5 7 s , using the relativistic distorted wave approximation for the applications in plasma modelling. Multi-configurational Dirac–Fock wave functions are used in the calculations. The oscillator strength and cross section results are compared with the previous calculations and measurements. A comprehensive collisional radiative (CR) model is developed and used to characterize laser induced molybdenum plasma to ensure that the calculated cross sections can be used for various plasma modelling applications. The current CR model has taken into account the electron impact excitation and de-excitation processes using the calculated consistent cross sections. The electron induced processes are dominant kinetic processes in the laser induced plasma. Furthermore, the diagnostics of the laser induced Mo plasma is done by coupling the current CR model with the experimental laser induced breakdown spectroscopic measurements of Mal et al (2021 Appl . Phys . B 127 52). The plasma parameter, i.e., electron temperature has been calculated using nine measured intensities of the emission lines of Mo, with wavelengths 406.9, 423.3, 438.2, 453.7, 476.0, 550.7, 553.3, 557.0 and 592.9 nm. The results are also compared with the values reported in the Boltzmann plot at various delay times ranging from 0.5 to 5.0 μ s.
- 9 June 2021
- Published by AIP Publishing in Journal of Applied Physics
- Vol. 129 (22) , 223301
Estimation of electron density and temperature in an argon rotating gliding arc using optical and electrical measurements
This work reports average electron temperature ( ) and electron density ( ) of an atmospheric argon rotating gliding arc ( ), operated in glow-type mode, under transitional and turbulent flows. Both and were calculated near the shortest ( ) and longest ( ) gap between the electrodes, by two different methods using two separate measurements: (1) optical emission spectroscopy ( ) and (2) physical–electrical. calculated from (a) collisional radiative model ( ) ( ) and (b) BOLSIG+ [physical–electrical, reduced electric field as input], differed each other by 16%–26% at and 6% at . was maximum at ( eV) and minimum near (1.6–1.7 eV). Similarly, the was maximum near the (5–8 Td) and minimum near , reaching an asymptotic value (1 Td). By benchmarking from , the expected near was corrected to 3 Td. The calculated intensity agreed well with that of the measured for most of the emission lines indicating a well optimized model. The average near and from Stark broadening ( ) was 4.8– , which is an order higher than the calculated through current density (physical–electrical). and were not affected by gas flow, attributed to the glow-type mode operation. To the best of authors’ knowledge, this work reports for the first time (a) an optimized for s (fine-structure resolved), (b) the poly-diagnostic approach to estimate plasma parameters, and (c) the validation of calculated using physical–electrical measurements.- 9 June 2021
- Published by AIP Publishing in Journal of Applied Physics
- Vol. 129 (22) , 223301
Estimation of electron density and temperature in an argon rotating gliding arc using optical and electrical measurements
This work reports average electron temperature ( ) and electron density ( ) of an atmospheric argon rotating gliding arc ( ), operated in glow-type mode, under transitional and turbulent flows. Both and were calculated near the shortest ( ) and longest ( ) gap between the electrodes, by two different methods using two separate measurements: (1) optical emission spectroscopy ( ) and (2) physical–electrical. calculated from (a) collisional radiative model ( ) ( ) and (b) BOLSIG+ [physical–electrical, reduced electric field as input], differed each other by 16%–26% at and 6% at . was maximum at ( eV) and minimum near (1.6–1.7 eV). Similarly, the was maximum near the (5–8 Td) and minimum near , reaching an asymptotic value (1 Td). By benchmarking from , the expected near was corrected to 3 Td. The calculated intensity agreed well with that of the measured for most of the emission lines indicating a well optimized model. The average near and from Stark broadening ( ) was 4.8– , which is an order higher than the calculated through current density (physical–electrical). and were not affected by gas flow, attributed to the glow-type mode operation. To the best of authors’ knowledge, this work reports for the first time (a) an optimized for s (fine-structure resolved), (b) the poly-diagnostic approach to estimate plasma parameters, and (c) the validation of calculated using physical–electrical measurements.- 9 June 2021
- Published by AIP Publishing
- Vol. 129 (22) , 223301
10.1063/5.0044014.1
This work reports average electron temperature ( T e) and electron density ( n e) of an atmospheric argon rotating gliding arc ( R G A), operated in glow-type mode, under transitional and turbulent flows. Both T e and n e were calculated near the shortest ( δ) and longest ( Δ) gap between the electrodes, by two different methods using two separate measurements: (1) optical emission spectroscopy ( O E S) and (2) physical–electrical. T e calculated from (a) collisional radiative model ( C R M) ( O E S) and (b) BOLSIG+ [physical–electrical, reduced electric field ( E N o ) as input], differed each other by 16%–26% at δ and 6% at Δ. T e was maximum at δ ( > 2 eV) and minimum near Δ (1.6–1.7 eV). Similarly, the E N o was maximum near the δ (5–8 Td) and minimum near Δ, reaching an asymptotic value (1 Td). By benchmarking T e from C R M, the expected E N o near δ was corrected to 3 Td. The calculated C R M intensity agreed well with that of the measured for most of the emission lines indicating a well optimized model. The average n e near δ and Δ from Stark broadening ( O E S) was 4.8– 8.0 × 10 21 m − 3, which is an order higher than the n e calculated through current density (physical–electrical). T e and n e were not affected by gas flow, attributed to the glow-type mode operation. To the best of authors’ knowledge, this work reports for the first time (a) an optimized C R M for R G As (fine-structure resolved), (b) the poly-diagnostic approach to estimate plasma parameters, and (c) the validation of E N o calculated using physical–electrical measurements.
- 9 June 2021
- Published by AIP Publishing
- Vol. 129 (22) , 223301
10.1063/5.0044014.1
This work reports average electron temperature ( T e) and electron density ( n e) of an atmospheric argon rotating gliding arc ( R G A), operated in glow-type mode, under transitional and turbulent flows. Both T e and n e were calculated near the shortest ( δ) and longest ( Δ) gap between the electrodes, by two different methods using two separate measurements: (1) optical emission spectroscopy ( O E S) and (2) physical–electrical. T e calculated from (a) collisional radiative model ( C R M) ( O E S) and (b) BOLSIG+ [physical–electrical, reduced electric field ( E N o ) as input], differed each other by 16%–26% at δ and 6% at Δ. T e was maximum at δ ( > 2 eV) and minimum near Δ (1.6–1.7 eV). Similarly, the E N o was maximum near the δ (5–8 Td) and minimum near Δ, reaching an asymptotic value (1 Td). By benchmarking T e from C R M, the expected E N o near δ was corrected to 3 Td. The calculated C R M intensity agreed well with that of the measured for most of the emission lines indicating a well optimized model. The average n e near δ and Δ from Stark broadening ( O E S) was 4.8– 8.0 × 10 21 m − 3, which is an order higher than the n e calculated through current density (physical–electrical). T e and n e were not affected by gas flow, attributed to the glow-type mode operation. To the best of authors’ knowledge, this work reports for the first time (a) an optimized C R M for R G As (fine-structure resolved), (b) the poly-diagnostic approach to estimate plasma parameters, and (c) the validation of E N o calculated using physical–electrical measurements.