Yuan Li
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Previous Organizations / Institutes
The organizations / institutes from the scholar's other articles in the past ten years
Research Subjects
Yuan Li has a total of 49 co-authors. Here are the top co-authors by number of shared publications:
- Lei Huang
School of Electrical Engineering, Southeast University, Nanjing 210096, China
15 shared publications - Minshuo Chen
School of Electric Power Engineering, Nanjing Institute of Technology, Nanjing 211167, China
14 shared publications - Fengyu Shen
School of Electrical Engineering, Southeast University, Nanjing, China
7 shared publications - Hui Yang
College of Automation Engineering, Nanjing University of Aeronautics and Astronautics, Nanjing, China
7 shared publications - Likun Wang
Harbin University of Science and Technology
4 shared publications Minqiang Hu
3 shared publications
Latest Publications
- Top Cited Papers
- 1 July 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Industrial Electronics
- Vol. 73 (7) , 9716-9728
Thrust Generation Mechanism of a Hybrid Excitation Field Modulated Transverse Flux Linear Generator by Magnetic Field Modulation Theory
- 1 July 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Industrial Electronics
- Vol. 73 (7) , 9716-9728
Top Cited PapersThrust Generation Mechanism of a Hybrid Excitation Field Modulated Transverse Flux Linear Generator by Magnetic Field Modulation Theory
- 18 December 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Energy Conversion
- Vol. 41 (2) , 1753-1766
Analytical Calculation of an Axial Flux Multi-Rotor Magnetic Gear Generator and Analysis of Its Harmonic Speed-Up Effect
In order to solve the problem of low power density of traditional wave energy converters (WECs) due to low wave frequency and low speed, a multi-port magnetic field modulation axial flux generator (MPMFM-AFG) for WECs is proposed. The three-dimensional structure and working principle are introduced. Based on the proposed analytical method, the harmonic components of the air gap flux density before modulation and after modulation are calculated and analyzed. The accuracy of the analytical model was verified by the finite element method (FEM). The no-load back EMF, static torque, flux density, loss and efficiency of the proposed MPMFM-AFG are calculated. Compared with the existing WECs, the proposed MPMFM-AFG can achieve higher power density at lower linear speed. The experimental results and calculation results are compared and analyzed to verify the effectiveness of the proposed MPMFM-AFG and the accuracy of the calculation method.
- 18 December 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Energy Conversion
- Vol. 41 (2) , 1753-1766
Analytical Calculation of an Axial Flux Multi-Rotor Magnetic Gear Generator and Analysis of Its Harmonic Speed-Up Effect
In order to solve the problem of low power density of traditional wave energy converters (WECs) due to low wave frequency and low speed, a multi-port magnetic field modulation axial flux generator (MPMFM-AFG) for WECs is proposed. The three-dimensional structure and working principle are introduced. Based on the proposed analytical method, the harmonic components of the air gap flux density before modulation and after modulation are calculated and analyzed. The accuracy of the analytical model was verified by the finite element method (FEM). The no-load back EMF, static torque, flux density, loss and efficiency of the proposed MPMFM-AFG are calculated. Compared with the existing WECs, the proposed MPMFM-AFG can achieve higher power density at lower linear speed. The experimental results and calculation results are compared and analyzed to verify the effectiveness of the proposed MPMFM-AFG and the accuracy of the calculation method.
- 8 December 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Transportation Electrification
- Vol. 12 (2) , 2743-2759
Design and Analysis of a Hybrid Excitation Transverse Flux Linear Machine Used for Linear Railway Traction
Due to their simple structure and high efficiency, various types of linear machines are employed in direct-drive applications such as linear railway traction. The transverse flux linear machine (TFLM) can achieve high thrust density, but it has demerits of severe magnetic flux leakage and large detent force. This article investigates a tubular hybrid excitation TFLM (HE-TFLM) for a linear railway traction system. The structure and working principle of the proposed machine are described in detail. Subsequently, a magnetic circuit analysis is conducted while taking axial magnetic flux leakage into consideration. By optimizing the pole arc coefficient, the magnetic flux leakage of the machine is reduced, and performance parameters such as average thrust are improved. Based on the optimized dimensional parameters, the machine performance with different combinations of primary slots and secondary poles is compared. It is proved that employing cross-connected windings simultaneously in both the circumferential and axial directions can effectively reduce thrust ripple. Moreover, the loss and efficiency analysis and temperature field simulation results are given. Since both the primary and secondary of the HE-TFLM can be axially laminated, the motor exhibits very low eddy current losses. Despite the relatively high copper losses in the motor, its efficiency under rated conditions remains acceptable. An HE-TFLM prototype is manufactured, and an experimental platform is established to measure the no-load back electromotive force (EMF) and on-load thrust of the prototype under two conditions: reciprocal motion with a sinusoidal velocity of the secondary and linear motion with a constant velocity of the secondary. The experimental results are in good agreement with the simulation results. Compared with other TFLMs, the proposed machine achieves relatively high thrust density and extremely low thrust ripple. Additionally, by adopting a hybrid excitation method, the proposed HE-TFLM attains a wide speed regulation range, making it well-suited for application in linear railway traction systems.
- 8 December 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Transportation Electrification
- Vol. 12 (2) , 2743-2759
Design and Analysis of a Hybrid Excitation Transverse Flux Linear Machine Used for Linear Railway Traction
Due to their simple structure and high efficiency, various types of linear machines are employed in direct-drive applications such as linear railway traction. The transverse flux linear machine (TFLM) can achieve high thrust density, but it has demerits of severe magnetic flux leakage and large detent force. This article investigates a tubular hybrid excitation TFLM (HE-TFLM) for a linear railway traction system. The structure and working principle of the proposed machine are described in detail. Subsequently, a magnetic circuit analysis is conducted while taking axial magnetic flux leakage into consideration. By optimizing the pole arc coefficient, the magnetic flux leakage of the machine is reduced, and performance parameters such as average thrust are improved. Based on the optimized dimensional parameters, the machine performance with different combinations of primary slots and secondary poles is compared. It is proved that employing cross-connected windings simultaneously in both the circumferential and axial directions can effectively reduce thrust ripple. Moreover, the loss and efficiency analysis and temperature field simulation results are given. Since both the primary and secondary of the HE-TFLM can be axially laminated, the motor exhibits very low eddy current losses. Despite the relatively high copper losses in the motor, its efficiency under rated conditions remains acceptable. An HE-TFLM prototype is manufactured, and an experimental platform is established to measure the no-load back electromotive force (EMF) and on-load thrust of the prototype under two conditions: reciprocal motion with a sinusoidal velocity of the secondary and linear motion with a constant velocity of the secondary. The experimental results are in good agreement with the simulation results. Compared with other TFLMs, the proposed machine achieves relatively high thrust density and extremely low thrust ripple. Additionally, by adopting a hybrid excitation method, the proposed HE-TFLM attains a wide speed regulation range, making it well-suited for application in linear railway traction systems.
- 25 November 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Transportation Electrification
- Vol. 12 (2) , 2273-2297
A Comprehensive Review of High-Performance Magnetic Lead Screw Design and Enabling Technologies
Magnetic lead screws (MLSs), also known as trans-rotary magnetic gears (TROMAGs), enable contactless bidirectional conversion between rotary and linear motion through magnetic coupling. Compared with conventional linear actuators, MLSs offer higher thrust force density and improved reliability, making them promising for linear motion applications. This article presents a comprehensive review of high-performance MLS technologies. The operating principle of MLSs is first introduced, followed by a systematic classification of MLS topologies based on excitation sources and a comparative analysis of their structural features and performance tradeoffs. A universal design optimization and analysis framework is then proposed, encompassing analytical methods, control strategies, and performance metrics. Advanced manufacturing techniques are subsequently discussed in relation to performance, complexity, and fabrication. Typical application scenarios are further analyzed based on functional requirements, and suitable MLS types and manufacturing methods are recommended accordingly. Finally, key technical challenges and future research directions are outlined to support the continued advancement of MLS technology.
- 25 November 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Transportation Electrification
- Vol. 12 (2) , 2273-2297
A Comprehensive Review of High-Performance Magnetic Lead Screw Design and Enabling Technologies
Magnetic lead screws (MLSs), also known as trans-rotary magnetic gears (TROMAGs), enable contactless bidirectional conversion between rotary and linear motion through magnetic coupling. Compared with conventional linear actuators, MLSs offer higher thrust force density and improved reliability, making them promising for linear motion applications. This article presents a comprehensive review of high-performance MLS technologies. The operating principle of MLSs is first introduced, followed by a systematic classification of MLS topologies based on excitation sources and a comparative analysis of their structural features and performance tradeoffs. A universal design optimization and analysis framework is then proposed, encompassing analytical methods, control strategies, and performance metrics. Advanced manufacturing techniques are subsequently discussed in relation to performance, complexity, and fabrication. Typical application scenarios are further analyzed based on functional requirements, and suitable MLS types and manufacturing methods are recommended accordingly. Finally, key technical challenges and future research directions are outlined to support the continued advancement of MLS technology.
- 22 July 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Transportation Electrification
- Vol. 11 (5) , 12531-12546
Magnetic–Thermal–Fluid Coupled Heat Transfer Analysis of an MPMFM-AFM With Mixed Flow Fan
To solve the heating problem of a multiport magnetic field-modulated axial flux motor (MPMFM-AFM) used in hybrid electric vehicles (HEVs), a ventilation structure based on a novel mixed flow fan is proposed. Based on the magnetic–thermal–fluid coupled iterative method, the transient temperature of the MPMFM-AFM is calculated. First, the structure and working principle of the MPMFM-AFM are introduced. The core loss, eddy current loss, and copper loss of the MPMFM-AFM under different working conditions are calculated. Second, when the multirotor rotation is taken into account, the 3-D heat transfer model of the MPMFM-AFM is established. Then, the transient temperature of the motor under different working conditions is calculated. The effects of inlet air velocity and water velocity on the maximum temperature of the motor are studied. Compared with existing axial flow fans and centrifugal fans, the permanent magnets and windings can be cooled more effectively by the proposed mixed flow fan. Finally, the prototype and four mixed flow fans are manufactured. The winding temperature and wind speed are measured. The accuracy of the proposed temperature solution method and the effectiveness of the mixed flow fan cooling structure are verified.
- 22 July 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Transportation Electrification
- Vol. 11 (5) , 12531-12546
Magnetic–Thermal–Fluid Coupled Heat Transfer Analysis of an MPMFM-AFM With Mixed Flow Fan
To solve the heating problem of a multiport magnetic field-modulated axial flux motor (MPMFM-AFM) used in hybrid electric vehicles (HEVs), a ventilation structure based on a novel mixed flow fan is proposed. Based on the magnetic–thermal–fluid coupled iterative method, the transient temperature of the MPMFM-AFM is calculated. First, the structure and working principle of the MPMFM-AFM are introduced. The core loss, eddy current loss, and copper loss of the MPMFM-AFM under different working conditions are calculated. Second, when the multirotor rotation is taken into account, the 3-D heat transfer model of the MPMFM-AFM is established. Then, the transient temperature of the motor under different working conditions is calculated. The effects of inlet air velocity and water velocity on the maximum temperature of the motor are studied. Compared with existing axial flow fans and centrifugal fans, the permanent magnets and windings can be cooled more effectively by the proposed mixed flow fan. Finally, the prototype and four mixed flow fans are manufactured. The winding temperature and wind speed are measured. The accuracy of the proposed temperature solution method and the effectiveness of the mixed flow fan cooling structure are verified.
- 23 June 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Energy Conversion
- Vol. 41 (1) , 809-823
Analysis of a Linear-Rotary Magnetic Field Modulation Generator for Wave Energy Conversion
In order to solve the problems of low ‘power/volume’ or low ‘power/cost’ caused by the low speed of wave energy converter (WEC), a linear-rotary magnetic field modulation generator (LMFMG) is proposed. The three-dimensional structure and working principle of LMFMG are introduced. The air gap flux density of the magnetic gear screw is calculated to verify the magnetic field modulation principle and the speed-up mechanism. After comparative analysis, the optimized parameters and output parameters of the LMFMG are given. The back EMF, loss and efficiency of the rotary generator are calculated. Through magnetic field modulation, the proposed LMFMG can convert the linear motion of 0.5 m/s into a highspeed rotational motion of 10000 rpm. Compared with the existing WEC, the proposed LMFMG has higher ‘power/volume’ and ‘power/cost’, which makes it very potential in WEC. The prototype is manufactured and the experimental platform is built. The thrust, torque, current and back EMF are measured to verify the theoretical calculation results of LMFMG.
- 23 June 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Energy Conversion
- Vol. 41 (1) , 809-823
Analysis of a Linear-Rotary Magnetic Field Modulation Generator for Wave Energy Conversion
In order to solve the problems of low ‘power/volume’ or low ‘power/cost’ caused by the low speed of wave energy converter (WEC), a linear-rotary magnetic field modulation generator (LMFMG) is proposed. The three-dimensional structure and working principle of LMFMG are introduced. The air gap flux density of the magnetic gear screw is calculated to verify the magnetic field modulation principle and the speed-up mechanism. After comparative analysis, the optimized parameters and output parameters of the LMFMG are given. The back EMF, loss and efficiency of the rotary generator are calculated. Through magnetic field modulation, the proposed LMFMG can convert the linear motion of 0.5 m/s into a highspeed rotational motion of 10000 rpm. Compared with the existing WEC, the proposed LMFMG has higher ‘power/volume’ and ‘power/cost’, which makes it very potential in WEC. The prototype is manufactured and the experimental platform is built. The thrust, torque, current and back EMF are measured to verify the theoretical calculation results of LMFMG.
- 2 June 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-2
Analysis of Magnetic Field Modulation Mechanism in Transverse Flux Cylindrical Linear Generator Used in Direct Drive Wave Energy Conversion
Extracting wave energy for power generation is a decent way to meet sea area power supply demands. Among various power take-off devices, direct-drive wave energy converter (DDWEC) is more efficient in wave energy conversion. However, it still has demerits of low speed and low generator power density. Magnetic field modulation is a feasible method to increase speed and enhance power density. In this paper, a transverse flux cylindrical magnetic field modulated linear generator is proposed. The magnetic field modulation mechanism of this topology is elaborated. Different combinations of stator slots and translator poles are compared. The 12/11 topology proves to have a relatively low detent force (0.94N), thrust ripple (0.76%) and a high average thrust (247.01N).
- 2 June 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-2
Analysis of Magnetic Field Modulation Mechanism in Transverse Flux Cylindrical Linear Generator Used in Direct Drive Wave Energy Conversion
Extracting wave energy for power generation is a decent way to meet sea area power supply demands. Among various power take-off devices, direct-drive wave energy converter (DDWEC) is more efficient in wave energy conversion. However, it still has demerits of low speed and low generator power density. Magnetic field modulation is a feasible method to increase speed and enhance power density. In this paper, a transverse flux cylindrical magnetic field modulated linear generator is proposed. The magnetic field modulation mechanism of this topology is elaborated. Different combinations of stator slots and translator poles are compared. The 12/11 topology proves to have a relatively low detent force (0.94N), thrust ripple (0.76%) and a high average thrust (247.01N).
- 31 May 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Magnetics
- Vol. 60 (9) , 1-5
A Low Thrust Ripple Flux-Reversal Transverse Flux Permanent Magnet Linear Generator Used in Direct Drive Wave Energy Converter
Direct-drive wave energy converter (DDWEC) is more widely used due to its simple structure and high conversion efficiency. Different kinds of linear machines are used in DDWEC to improve the power density. Among them, transverse flux linear machine uses perpendicular magnetic flux path and axial stacked silicon steel sheets to reduce iron loss and enhance power density. In this paper, a flux-reversal transverse flux permanent magnet linear generator is proposed. The winding connection type of this configuration is elaborated. Circumferential three-phase type, axial three-phase type and the proposed one are compared to obtain higher power density and lower thrust ripple. The proposed three-phase winding configuration has the lowest thrust ripple (0.76%) and decent average thrust (247.01N). A prototype was manufactured and an experimental testing platform was built. The measured back EMF values in the experiment showed a consistent trend with the FEA values. Owing to the convenience in changing the armature winding connection and excitation winding connection, the proposed machine has high design flexibility. The proposed machine is suitable to be used in high power density and low thrust ripple applications. When the proposed machine uses dual three-phase winding or six-phase winding, it also has high fault tolerance ability.
- 31 May 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Magnetics
- Vol. 60 (9) , 1-5
A Low Thrust Ripple Flux-Reversal Transverse Flux Permanent Magnet Linear Generator Used in Direct Drive Wave Energy Converter
Direct-drive wave energy converter (DDWEC) is more widely used due to its simple structure and high conversion efficiency. Different kinds of linear machines are used in DDWEC to improve the power density. Among them, transverse flux linear machine uses perpendicular magnetic flux path and axial stacked silicon steel sheets to reduce iron loss and enhance power density. In this paper, a flux-reversal transverse flux permanent magnet linear generator is proposed. The winding connection type of this configuration is elaborated. Circumferential three-phase type, axial three-phase type and the proposed one are compared to obtain higher power density and lower thrust ripple. The proposed three-phase winding configuration has the lowest thrust ripple (0.76%) and decent average thrust (247.01N). A prototype was manufactured and an experimental testing platform was built. The measured back EMF values in the experiment showed a consistent trend with the FEA values. Owing to the convenience in changing the armature winding connection and excitation winding connection, the proposed machine has high design flexibility. The proposed machine is suitable to be used in high power density and low thrust ripple applications. When the proposed machine uses dual three-phase winding or six-phase winding, it also has high fault tolerance ability.