Rasoul Sadeghi
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Rasoul Sadeghi has a total of 31 co-authors. Here are the top co-authors by number of shared publications:
Antonio Napoli
Infinera, Germany, Munich
5 shared publicationsVittorio Curri
DET, Politécnico di Torino, C.so Duca degli Abruzzi 24, 10129 Torino, Italy
5 shared publicationsBruno Correia
DET, Politécnico di Torino, C.so Duca degli Abruzzi 24, 10129 Torino, Italy
4 shared publications- Bruno Correia
Politecnico di Torino
4 shared publications - Vittorio Curri
Politecnico di Torino
4 shared publications Alejandra Beghelli
3 shared publications
Latest Publications
- 8 July 2025
- Published by Optica Publishing Group in Journal of Optical Communications and Networking
- Vol. 17 (8) , 676
Traffic-aware and physically constrained optical network growth techniques
Maximizing network throughput is crucial for operators facing rapid traffic growth. One effective strategy for achieving this is through targeted network expansion—strategically adding edges to maximize network throughput, not only for a specific set of demands but also for future traffic growth. Finding the optimal combination of new edges to maximize throughput is an NP-hard optimization problem. Therefore, in this work, we propose four scalable network expansion methods that consider the network traffic distribution and the network’s physical and structural properties to select the edges to be added to the optical infrastructure. The proposed methods belong to either the cut set category or the cut set and message-passing combinations (hybrid) category. The cut set methods aim to add new edges that eliminate structural bottlenecks in the network, prioritizing either those that decrease path length or increase signal-to-noise ratio (SNR). The hybrid methods leverage the strengths of both message-passing and cut set approaches by strategically selecting new edges to reduce path lengths through message passing while targeting bottlenecks with the cut set technique. We applied these methods to 100 NFSNet-based synthetic graphs and 44 real-world topologies and evaluated their performance against two baseline methods previously evaluated in the literature. Numerical results show that the proposed methods outperform the baseline approaches. Methods taking the SNR into account perform better than those considering path lengths, and topology properties significantly impact the performance of the proposed network expansion methods.
- 8 July 2025
- Published by Optica Publishing Group in Journal of Optical Communications and Networking
- Vol. 17 (8) , 676
Traffic-aware and physically constrained optical network growth techniques
Maximizing network throughput is crucial for operators facing rapid traffic growth. One effective strategy for achieving this is through targeted network expansion—strategically adding edges to maximize network throughput, not only for a specific set of demands but also for future traffic growth. Finding the optimal combination of new edges to maximize throughput is an NP-hard optimization problem. Therefore, in this work, we propose four scalable network expansion methods that consider the network traffic distribution and the network’s physical and structural properties to select the edges to be added to the optical infrastructure. The proposed methods belong to either the cut set category or the cut set and message-passing combinations (hybrid) category. The cut set methods aim to add new edges that eliminate structural bottlenecks in the network, prioritizing either those that decrease path length or increase signal-to-noise ratio (SNR). The hybrid methods leverage the strengths of both message-passing and cut set approaches by strategically selecting new edges to reduce path lengths through message passing while targeting bottlenecks with the cut set technique. We applied these methods to 100 NFSNet-based synthetic graphs and 44 real-world topologies and evaluated their performance against two baseline methods previously evaluated in the literature. Numerical results show that the proposed methods outperform the baseline approaches. Methods taking the SNR into account perform better than those considering path lengths, and topology properties significantly impact the performance of the proposed network expansion methods.
- 26 June 2025
- Published by Optica Publishing Group in Journal of Optical Communications and Networking
- Vol. 17 (9) , D1
Reinforcement learning for dynamic resource allocation in optical networks: hype or hope?
The application of reinforcement learning (RL) to dynamic resource allocation in optical networks has been the focus of intense research activity in recent years, with almost 100 peer-reviewed papers. We present a review of progress in this field and identify weaknesses in benchmarking practices and reproducibility. To demonstrate best practice, we exactly recreate the problem settings from five landmark papers and apply improved benchmarks. To determine the best benchmarks, we evaluate several heuristic algorithms and optimize the candidate path count and sort criteria for path selection. We apply the improved benchmarks and demonstrate that simple heuristics outperform the published RL solutions, often with an order of magnitude lower blocking probability. Finally, to estimate the limits of improvement on the benchmarks, we present empirical lower bounds on blocking probability using a novel, to our knowledge, defragmentation-based method. Our method estimates that traffic load can be increased by 19%–36% for the same blocking in our examples, which may motivate further research on optimized resource allocation. We make our simulation framework and results openly available to promote reproducible research and standardized evaluation: https://doi.org/10.5281/zenodo.12594495.
- 26 June 2025
- Published by Optica Publishing Group in Journal of Optical Communications and Networking
- Vol. 17 (9) , D1
Reinforcement learning for dynamic resource allocation in optical networks: hype or hope?
The application of reinforcement learning (RL) to dynamic resource allocation in optical networks has been the focus of intense research activity in recent years, with almost 100 peer-reviewed papers. We present a review of progress in this field and identify weaknesses in benchmarking practices and reproducibility. To demonstrate best practice, we exactly recreate the problem settings from five landmark papers and apply improved benchmarks. To determine the best benchmarks, we evaluate several heuristic algorithms and optimize the candidate path count and sort criteria for path selection. We apply the improved benchmarks and demonstrate that simple heuristics outperform the published RL solutions, often with an order of magnitude lower blocking probability. Finally, to estimate the limits of improvement on the benchmarks, we present empirical lower bounds on blocking probability using a novel, to our knowledge, defragmentation-based method. Our method estimates that traffic load can be increased by 19%–36% for the same blocking in our examples, which may motivate further research on optimized resource allocation. We make our simulation framework and results openly available to promote reproducible research and standardized evaluation: https://doi.org/10.5281/zenodo.12594495.
- 9 December 2024
- Published by Optica Publishing Group in Journal of Optical Communications and Networking
- Vol. 17 (1) , 7-27
Topology Bench: systematic graph-based benchmarking for core optical networks
Topology Bench is a comprehensive topology dataset designed to accelerate benchmarking studies in optical networks. The dataset, focusing on core optical networks, comprises publicly accessible and ready-to-use topologies, including (a) 105 georeferenced real-world optical networks and (b) 270,900 validated synthetic topologies. Prior research on real-world core optical networks has been characterized by fragmented open data sources and disparate individual studies. Moreover, previous efforts have notably failed to provide synthetic data at a scale comparable to our present study. Topology Bench addresses this limitation, offering a unified resource, and represents a 61.5% increase in spatially referenced real-world optical networks. To benchmark and identify the fundamental nature of optical network topologies through the lens of graph-theoretical analysis, we analyze both real and synthetic networks using structural, spatial, and spectral metrics. Our comparative analysis identifies constraints in real optical network diversity and illustrates how synthetic networks can complement and expand the range of topologies available for use. Currently, topologies are selected based on subjective criteria, such as preference, data availability, or perceived suitability, leading to potential biases and limited representativeness. Our framework enhances the generalizability of optical network research by providing a more objective and systematic approach to topology selection. A statistical and correlation analysis reveals the quantitative range of all of these graph metrics and the relationships between them. Finally, we apply unsupervised machine learning to cluster real-world topologies into distinctive groups based on nine optimal graph metrics using K-means. It employs a two-step optimization process: optimal features are selected by maximizing feature uniqueness through principal component analysis, and the optimal number of clusters is determined by maximizing decision boundary distances via support vector machines. We conclude the analysis by providing guidance on how to use such clusters to select a diverse set of topologies for future studies. Topology Bench, openly available via Dataset 1 (https://zenodo.org/records/13921775) and Code 1 (https://github.com/TopologyBench), promotes accessibility, consistency, and reproducibility.
- 9 December 2024
- Published by Optica Publishing Group in Journal of Optical Communications and Networking
- Vol. 17 (1) , 7-27
Topology Bench: systematic graph-based benchmarking for core optical networks
Topology Bench is a comprehensive topology dataset designed to accelerate benchmarking studies in optical networks. The dataset, focusing on core optical networks, comprises publicly accessible and ready-to-use topologies, including (a) 105 georeferenced real-world optical networks and (b) 270,900 validated synthetic topologies. Prior research on real-world core optical networks has been characterized by fragmented open data sources and disparate individual studies. Moreover, previous efforts have notably failed to provide synthetic data at a scale comparable to our present study. Topology Bench addresses this limitation, offering a unified resource, and represents a 61.5% increase in spatially referenced real-world optical networks. To benchmark and identify the fundamental nature of optical network topologies through the lens of graph-theoretical analysis, we analyze both real and synthetic networks using structural, spatial, and spectral metrics. Our comparative analysis identifies constraints in real optical network diversity and illustrates how synthetic networks can complement and expand the range of topologies available for use. Currently, topologies are selected based on subjective criteria, such as preference, data availability, or perceived suitability, leading to potential biases and limited representativeness. Our framework enhances the generalizability of optical network research by providing a more objective and systematic approach to topology selection. A statistical and correlation analysis reveals the quantitative range of all of these graph metrics and the relationships between them. Finally, we apply unsupervised machine learning to cluster real-world topologies into distinctive groups based on nine optimal graph metrics using K-means. It employs a two-step optimization process: optimal features are selected by maximizing feature uniqueness through principal component analysis, and the optimal number of clusters is determined by maximizing decision boundary distances via support vector machines. We conclude the analysis by providing guidance on how to use such clusters to select a diverse set of topologies for future studies. Topology Bench, openly available via Dataset 1 (https://zenodo.org/records/13921775) and Code 1 (https://github.com/TopologyBench), promotes accessibility, consistency, and reproducibility.
- 12 September 2023
- Published by Optica Publishing Group in Journal of Optical Communications and Networking
- Vol. 15 (10) , E51-E62
Networking assessment of ROADM architecture based on a photonics integrated WSS for 800G multi-band optical transport
The capacity of the optical transport network must be expanded to support the increasing demand due to bandwidth-intensive applications. Multi-band transmission solutions can achieve this goal by exploiting the low-loss optical spectrum windows while maintaining the same existing fiber infrastructure, increasing the network’s capacity, and minimizing the operator capital expenditure (CAPEX) by limiting the need for a new fiber deployment. In the context of multi-band transmission, this work proposes a novel reconfigurable optical add–drop multiplexer (ROADM) architecture using a modular photonic integrated multi-band wavelength selective switch (WSS) that operates over multi-bands (S + C + L). This study focuses on conducting a comprehensive network performance analysis of different settings, enabling operation from 400G up to 800G using the proposed multi-band WSS on two real network topologies: German and Italian. The results provide the potential benefits of transitioning from traditional C-band transmission to multi-band transmission based on overall network performance.
- 12 September 2023
- Published by Optica Publishing Group in Journal of Optical Communications and Networking
- Vol. 15 (10) , E51-E62
Networking assessment of ROADM architecture based on a photonics integrated WSS for 800G multi-band optical transport
The capacity of the optical transport network must be expanded to support the increasing demand due to bandwidth-intensive applications. Multi-band transmission solutions can achieve this goal by exploiting the low-loss optical spectrum windows while maintaining the same existing fiber infrastructure, increasing the network’s capacity, and minimizing the operator capital expenditure (CAPEX) by limiting the need for a new fiber deployment. In the context of multi-band transmission, this work proposes a novel reconfigurable optical add–drop multiplexer (ROADM) architecture using a modular photonic integrated multi-band wavelength selective switch (WSS) that operates over multi-bands (S + C + L). This study focuses on conducting a comprehensive network performance analysis of different settings, enabling operation from 400G up to 800G using the proposed multi-band WSS on two real network topologies: German and Italian. The results provide the potential benefits of transitioning from traditional C-band transmission to multi-band transmission based on overall network performance.
- 16 May 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-3
Capacity and Energy Consumption Comparison in Translucent versus Transparent Multi-band Designs
A comparison of the capacity and energy consumption In translucent and transparent multi-band (from S- to U-band) optical network designs is reported. We show that enabling more bands in the transparent network design leads to higher capacity than exploring optical signal regeneration (translucent network design) in already deployed bands. Moreover, the results suggest that both the S- and U-band lead to similar capacity improvement in a transparent network design. However, we find out that deploying a C+L+S-band multi-band network is slightly more power-efficient than deploying the equivalent C+L+U-band scenario.
- 16 May 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-3
Capacity and Energy Consumption Comparison in Translucent versus Transparent Multi-band Designs
A comparison of the capacity and energy consumption In translucent and transparent multi-band (from S- to U-band) optical network designs is reported. We show that enabling more bands in the transparent network design leads to higher capacity than exploring optical signal regeneration (translucent network design) in already deployed bands. Moreover, the results suggest that both the S- and U-band lead to similar capacity improvement in a transparent network design. However, we find out that deploying a C+L+S-band multi-band network is slightly more power-efficient than deploying the equivalent C+L+U-band scenario.
- Open Access
- 19 April 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in Journal of Lightwave Technology
- Vol. 40 (11) , 3486-3498
Transparent vs Translucent Multi-Band Optical Networking: Capacity and Energy Analyses
Multi-band optical fiber transmission is generally proposed for capacity upgrades in optical transport networks. To comprehensively assess the potential of multi-band transmission, key metrics such as the potential capacity increase, energy consumption, and the number of required interfaces must be evaluated for different transmission scenarios. We consider progressive spectral exploitation, starting from the C-band only and up to C+L+S+U-band transmission, for both transparent and translucent solutions that exploit optical signal regeneration. By considering accurate state-of-the-art physical layer models, we derive a networking performance metric that enables the comparison of different solutions in terms of capacity allocation and energy consumption. For a translucent network design, different regenerator placement algorithms are compared, with the aim of minimizing energy consumption. The proposed network-wide numerical analysis shows that, for spectral occupations exceeding the C+L-band, translucent solutions can significantly increase network capacity, while leading to a similar energy consumption per transmitted bit as in the transparent design case, but they require the deployment of additional line interfaces. Significantly, these results provide evidence that the transparent exploitation of an additional transmission band produces a capacity increment that is at least comparable to that of a translucent solution based on already-in-use bands. Since this is attained at the expense of fewer line interfaces, it is a key finding suggesting that extending the number of bands supported is a cost-effective approach to scaling the capacity of existing fiber infrastructures.
- 19 April 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in Journal of Lightwave Technology
- Vol. 40 (11) , 3486-3498
Open AccessTransparent vs Translucent Multi-Band Optical Networking: Capacity and Energy Analyses
Multi-band optical fiber transmission is generally proposed for capacity upgrades in optical transport networks. To comprehensively assess the potential of multi-band transmission, key metrics such as the potential capacity increase, energy consumption, and the number of required interfaces must be evaluated for different transmission scenarios. We consider progressive spectral exploitation, starting from the C-band only and up to C+L+S+U-band transmission, for both transparent and translucent solutions that exploit optical signal regeneration. By considering accurate state-of-the-art physical layer models, we derive a networking performance metric that enables the comparison of different solutions in terms of capacity allocation and energy consumption. For a translucent network design, different regenerator placement algorithms are compared, with the aim of minimizing energy consumption. The proposed network-wide numerical analysis shows that, for spectral occupations exceeding the C+L-band, translucent solutions can significantly increase network capacity, while leading to a similar energy consumption per transmitted bit as in the transparent design case, but they require the deployment of additional line interfaces. Significantly, these results provide evidence that the transparent exploitation of an additional transmission band produces a capacity increment that is at least comparable to that of a translucent solution based on already-in-use bands. Since this is attained at the expense of fewer line interfaces, it is a key finding suggesting that extending the number of bands supported is a cost-effective approach to scaling the capacity of existing fiber infrastructures.
- 1 January 2022
- Published by Optica Publishing Group
- p. NeTu3D.2
Capacity and Energy Usage of Translucent and Multi-Band Transparent Optical Networks
This work shows that exploiting more bands in a transparent network design is a more effective and power-efficient way to increase the network capacity instead of relying on signal regenerators to increase spectral efficiency.
- 1 January 2022
- Published by Optica Publishing Group
- p. NeTu3D.2
Capacity and Energy Usage of Translucent and Multi-Band Transparent Optical Networks
This work shows that exploiting more bands in a transparent network design is a more effective and power-efficient way to increase the network capacity instead of relying on signal regenerators to increase spectral efficiency.
- 1 January 2022
- Published by Optica Publishing Group
- p. W3F.7
Optimal Spectral Usage and Energy Efficient S-to-U Multiband Optical Networking
We investigated and showed that using the U-band instead of the complete S-band is a more effective solution for increasing capacity while still reducing energy consumption and cost in transparent and translucent network designs.
- 1 January 2022
- Published by Optica Publishing Group
- p. W3F.7
Optimal Spectral Usage and Energy Efficient S-to-U Multiband Optical Networking
We investigated and showed that using the U-band instead of the complete S-band is a more effective solution for increasing capacity while still reducing energy consumption and cost in transparent and translucent network designs.
- 6 October 2021
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-7
Cost-Effective Capacity Increase of Deployed Optical Networks to Support the Future Internet: the Multi-Band Approach
Band division multiplexing is proposed in this work as a cost-effective strategy to cope with the always increasing demand for capacity in optical networks. The potential of the proposed strategy is investigated considering two reference network topologies from Germany and the USA. We evaluate the impact of using C+L+S-band in terms of capacity and energy consumption. The use of signal regeneration to improve optical performance is also evaluated. We showed that, due to the worse Quality of Transmission (QoT) in the S-band, it provides the smallest capacity increase among the considered transmission bands. Nevertheless, placing some optical signal regenerators in this band enables increasing significantly its capacity. However, this enhancement of capacity is achieved at the cost of increased energy consumption (besides capital expenditures).
- 6 October 2021
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-7
Cost-Effective Capacity Increase of Deployed Optical Networks to Support the Future Internet: the Multi-Band Approach
Band division multiplexing is proposed in this work as a cost-effective strategy to cope with the always increasing demand for capacity in optical networks. The potential of the proposed strategy is investigated considering two reference network topologies from Germany and the USA. We evaluate the impact of using C+L+S-band in terms of capacity and energy consumption. The use of signal regeneration to improve optical performance is also evaluated. We showed that, due to the worse Quality of Transmission (QoT) in the S-band, it provides the smallest capacity increase among the considered transmission bands. Nevertheless, placing some optical signal regenerators in this band enables increasing significantly its capacity. However, this enhancement of capacity is achieved at the cost of increased energy consumption (besides capital expenditures).
- 1 January 2021
- Published by Optica Publishing Group
- p. M3E.4
Performance Comparison of Translucent C-band and Transparent C+L-band Network
We compare transparent and translucent network design in terms of capacity, energy consumption, and cost. Results show that exploiting extra spectrum bands is more beneficial than deploying additional regenerators in the C-band.
- 1 January 2021
- Published by Optica Publishing Group
- p. M3E.4
Performance Comparison of Translucent C-band and Transparent C+L-band Network
We compare transparent and translucent network design in terms of capacity, energy consumption, and cost. Results show that exploiting extra spectrum bands is more beneficial than deploying additional regenerators in the C-band.