Roberto Gabrielli
Roberto Gabrielli has a total of 63 co-authors. Here are the top co-authors by number of shared publications:
- Marilena Cozzolino
University of Molise
4 shared publications - Andrea Angelini
Institute of Heritage Sciences (ISPC), National Council of Researches, Via Salaria Km. 29,300, Monterotondo St., 00015 Rome, Italy
3 shared publications - Lorenza Operti
Dipartimento di Chimica, Università degli Studi di Torino, Via P.Giuria 7, 10125 Torino, Italy
3 shared publications - Paola Benzi
Dipartimento di Chimica, University of Torino, Via P. Giuria 7, 10125 Torino, Italy
3 shared publications - Paolo Mauriello
University of Molise
3 shared publications - Eleonora Scopinaro
Institute of Heritage Sciences (ISPC), National Research Council of Italy, Via Salaria Km. 29,300, Monterotondo St., 00015 Rome, Italy
2 shared publications
Latest Publications
- Open Access
A Top-Down, Multi-Method and Multi-Scale Approach to Studying the Byzantine–Umayyad Settlement of Umm ar-Rasas (Amman, Jordan)
The present study constitutes the latest in a series of investigations conducted between 2021 and 2023 as part of the ongoing, multidisciplinary research project at the UNESCO archaeological site of Umm ar-Rasas in Amman Governorate, Jordan, which began in 2013. Building on the foundations of previous studies, this latest research offers a comprehensive analysis of the region, with a special focus on pinpointing the boundaries of the Byzantine–Umayyad settlement. The delineation of these boundaries has hitherto been the subject of theoretical discourse only, thus rendering this study a significant addition to the field. An innovative multi-dimensional, multi-methodological, and multi-scalar approach has been adopted, incorporating the capabilities of remote sensing technologies, archaeological surveys, laser scans, and geophysical prospecting to facilitate a shared interpretation of the results. This approach has culminated in the establishment of a probable configuration of the northern limits, which is truly remarkable.
Open AccessA Top-Down, Multi-Method and Multi-Scale Approach to Studying the Byzantine–Umayyad Settlement of Umm ar-Rasas (Amman, Jordan)
The present study constitutes the latest in a series of investigations conducted between 2021 and 2023 as part of the ongoing, multidisciplinary research project at the UNESCO archaeological site of Umm ar-Rasas in Amman Governorate, Jordan, which began in 2013. Building on the foundations of previous studies, this latest research offers a comprehensive analysis of the region, with a special focus on pinpointing the boundaries of the Byzantine–Umayyad settlement. The delineation of these boundaries has hitherto been the subject of theoretical discourse only, thus rendering this study a significant addition to the field. An innovative multi-dimensional, multi-methodological, and multi-scalar approach has been adopted, incorporating the capabilities of remote sensing technologies, archaeological surveys, laser scans, and geophysical prospecting to facilitate a shared interpretation of the results. This approach has culminated in the establishment of a probable configuration of the northern limits, which is truly remarkable.
- Top Cited PapersOpen Access
- 1 November 2024
- Published by Elsevier in Journal of Cultural Heritage
- Vol. 70, 397-407
HBIM for conservation and valorization of structural heritage: The Stylite Tower at Umm ar-Rasas, Jordan
- 1 November 2024
- Published by Elsevier in Journal of Cultural Heritage
- Vol. 70, 397-407
Top Cited PapersOpen AccessHBIM for conservation and valorization of structural heritage: The Stylite Tower at Umm ar-Rasas, Jordan
- 5 June 2022
- Published by Springer Nature
- p. 194-205
Integrative Archaeological Surveying for the Enhancement of Nuraghe Piscu in Suelli (SU), Italy
- 5 June 2022
- Published by Springer Nature
- p. 194-205
Integrative Archaeological Surveying for the Enhancement of Nuraghe Piscu in Suelli (SU), Italy
- Open Access
- 25 July 2019
- Published by Universitat Politecnica de Valencia in Virtual Archaeology Review
- Vol. 10 (21) , 31-39
Virtual museum enriched by GIS data to share science and culture. Church of Saint Stephen in Umm Ar-Rasas (Jordan)
Umm ar-Rasas is a Jordan archaeological site, located 30 km southeast of the city of Madaba, in the northern part of Wadi Mujib. It preserves findings dating back the period from the end of 3rd to the 9th century AD and, since 2004, it belongs to the world heritage list of UNESCO. In 2015 a multidisciplinary work was undertaken over the archaeological site, mainly focusing on the Church of Saint Stephen, with the main purpose of enhancing the knowledge and documenting the conservation state of the polychrome mosaic floor, which covers the entire surface of the hall and presbytery. A huge amount of data has been collected, coming from archaeological and historical investigations, geophysics and geodetic inspections and geomatics surveying, which produced also a true orthophoto of the mosaic floor. Data has been organized in a geo-database, facilitating the exchange of information between different actors. Moreover, the management of data within a dedicated Geographic Information System (GIS), has allowed in-depth analysis for understanding the evolution of the iconographic repertoire that, over the centuries, has undergone several disfigurements due to the iconoclastic age. The knowledge of the mosaic has also been vital for the implementation of multimedia applications and for the creation of virtual experiences, in which the information can be conveyed and visualized directly on the virtual reconstruction of the whole archaeological site. The innovation of the proposed work, is therefore in the management of a data flow that can be exploited by different actors through different platforms: experts, thanks to the use of GIS, and visitors with the use of multimedia applications (such as Augmented Reality (AR) or highresolution web visualization) for dissemination purposes, in order to preserve this priceless mankind heritage.Highlights:Definition of a complete pipeline ranging from data acquisition to visualization in multi-channel multimedia applications.Management of heterogeneous data in Geographic Information Systems (GIS) and their exploitation in Augmented and Virtual Reality (AR/VR).GIS applied to the archaeological domain for expert and non-expert users.
- 25 July 2019
- Published by Universitat Politecnica de Valencia in Virtual Archaeology Review
- Vol. 10 (21) , 31-39
Open AccessVirtual museum enriched by GIS data to share science and culture. Church of Saint Stephen in Umm Ar-Rasas (Jordan)
Umm ar-Rasas is a Jordan archaeological site, located 30 km southeast of the city of Madaba, in the northern part of Wadi Mujib. It preserves findings dating back the period from the end of 3rd to the 9th century AD and, since 2004, it belongs to the world heritage list of UNESCO. In 2015 a multidisciplinary work was undertaken over the archaeological site, mainly focusing on the Church of Saint Stephen, with the main purpose of enhancing the knowledge and documenting the conservation state of the polychrome mosaic floor, which covers the entire surface of the hall and presbytery. A huge amount of data has been collected, coming from archaeological and historical investigations, geophysics and geodetic inspections and geomatics surveying, which produced also a true orthophoto of the mosaic floor. Data has been organized in a geo-database, facilitating the exchange of information between different actors. Moreover, the management of data within a dedicated Geographic Information System (GIS), has allowed in-depth analysis for understanding the evolution of the iconographic repertoire that, over the centuries, has undergone several disfigurements due to the iconoclastic age. The knowledge of the mosaic has also been vital for the implementation of multimedia applications and for the creation of virtual experiences, in which the information can be conveyed and visualized directly on the virtual reconstruction of the whole archaeological site. The innovation of the proposed work, is therefore in the management of a data flow that can be exploited by different actors through different platforms: experts, thanks to the use of GIS, and visitors with the use of multimedia applications (such as Augmented Reality (AR) or highresolution web visualization) for dissemination purposes, in order to preserve this priceless mankind heritage.Highlights:Definition of a complete pipeline ranging from data acquisition to visualization in multi-channel multimedia applications.Management of heterogeneous data in Geographic Information Systems (GIS) and their exploitation in Augmented and Virtual Reality (AR/VR).GIS applied to the archaeological domain for expert and non-expert users.
- Open Access
- 16 May 2019
- Published by Instituto Nazionale di Geofisica e Vulcanologia, INGV in Annals of Geophysics
- Vol. 61 (Vol 61 (20) , 72
Combined use of 3D metric surveys and non-invasive geophysical surveys for the determination of the state of conservation of the Stylite Tower (Umm ar-Rasas, Jordan).
Combined use of 3D metric surveys and non-invasive geophysical surveys for the determination of the state of conservation of the Stylite Tower (Umm ar-Rasas, Jordan).
- 16 May 2019
- Published by Instituto Nazionale di Geofisica e Vulcanologia, INGV in Annals of Geophysics
- Vol. 61 (Vol 61 (20) , 72
Open AccessCombined use of 3D metric surveys and non-invasive geophysical surveys for the determination of the state of conservation of the Stylite Tower (Umm ar-Rasas, Jordan).
Combined use of 3D metric surveys and non-invasive geophysical surveys for the determination of the state of conservation of the Stylite Tower (Umm ar-Rasas, Jordan).
- 1 October 2018
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 132-136
Automatic Mosaic Digitalization: a Deep Learning approach to tessera segmentation
A mosaic, made of small coloured tiles, called tesserae or tessellas, is a form of decorative art to create images and patterns on a surface. One of the first steps to obtain digital mosaics is the segmentation process to separate (identify) tesserae. Then, various tools are necessary to catalog the digitalized scenes, to extract the figures, such as animal or human beings, from the puzzle of small pieces, to geolocalize the segmented objects and to assign a semantic meaning to them. While some mosaic segmentation approaches have already been reported in the literature, currently, mosaic segmentation is still done by human operators, resulting time consuming and error prone. We propose in this paper an automatic approach, based on Deep Learning, to segment the mosaic floor tesserae of the church of S. Stephen in Umm ar Rasas. Our approach allows to obtain automatically and with good reliability the description of the main elements of a mosaic (the tesserae) that are not homogeneous. The experiments performed on the collected tesserae dataset yield high accuracies and demonstrate the effectiveness and suitability of our approach.
- 1 October 2018
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 132-136
Automatic Mosaic Digitalization: a Deep Learning approach to tessera segmentation
A mosaic, made of small coloured tiles, called tesserae or tessellas, is a form of decorative art to create images and patterns on a surface. One of the first steps to obtain digital mosaics is the segmentation process to separate (identify) tesserae. Then, various tools are necessary to catalog the digitalized scenes, to extract the figures, such as animal or human beings, from the puzzle of small pieces, to geolocalize the segmented objects and to assign a semantic meaning to them. While some mosaic segmentation approaches have already been reported in the literature, currently, mosaic segmentation is still done by human operators, resulting time consuming and error prone. We propose in this paper an automatic approach, based on Deep Learning, to segment the mosaic floor tesserae of the church of S. Stephen in Umm ar Rasas. Our approach allows to obtain automatically and with good reliability the description of the main elements of a mosaic (the tesserae) that are not homogeneous. The experiments performed on the collected tesserae dataset yield high accuracies and demonstrate the effectiveness and suitability of our approach.
- 1 December 2009
- Published by Elsevier in Journal of Cultural Heritage
- Vol. 10, e27-e34
Planning the Archaeological Park of Chan Chan (Peru) by means of satellite images, GIS and photogrammetry
- 1 December 2009
- Published by Elsevier in Journal of Cultural Heritage
- Vol. 10, e27-e34
Planning the Archaeological Park of Chan Chan (Peru) by means of satellite images, GIS and photogrammetry
- 24 March 2009
- Published by Wiley in Archaeological Prospection
- Vol. 16 (2) , 111-124
Multimethodological approach to investigate chamber tombs in the Sabine Necropolis at Colle del Forno (CNR, Rome, Italy)
Non‐destructive geophysical prospecting methods are increasingly used for the investigation of archaeological sites, especially where a detailed physical and geometrical reconstruction of structures is required prior to any excavation work. Often, due to the limited size and depth of an archaeological structure, it may be rather difficult to single out its position and extent because of the generally low signal‐to noise (S/N) ratio. This can be overcome by improving data acquisition and processing techniques and integrating different geophysical methods. In this work the results of a multimethodological surveys, used with the aim of detecting sharp discontinuities (boundary of cavities and fractures in the host medium) at the Archaeological Test Site of Sabine Necropolis at Research Area of National Research Council of Rome (Montelibretti, Italy) are shown. For the survey a combination of passive and active methods (magnetic, ground‐penetrating radar (GPR), and dipole–dipole geoelectric (DDG)), topographical and three‐dimensional laser scanner surveys and archaeological excavations were used to study the state of conservation of underground tombs. With all geophysical methods a high‐resolution data acquisition was adopted with the aim of reconstructing a global vision of the study area. Signal processing and amplitude time‐slice representation techniques were used for the analysis of GPR data. The bi‐dimensional cross‐correlation technique was applied to enhance the S/N ratio of the magnetic data. An example of the integration (both qualitative and quantitative) of these results is presented for a portion of the investigated area in the Sabine Necropolis at Colle del Forno (Rome, Italy). Archaeological excavations were then conducted systematically after completing the geophysical surveys and interpretations (from 2000 to 2006), which confirmed the location and shape of the individual chamber tombs with associated corridors. Copyright © 2009 John Wiley & Sons, Ltd.
- 24 March 2009
- Published by Wiley in Archaeological Prospection
- Vol. 16 (2) , 111-124
Multimethodological approach to investigate chamber tombs in the Sabine Necropolis at Colle del Forno (CNR, Rome, Italy)
Non‐destructive geophysical prospecting methods are increasingly used for the investigation of archaeological sites, especially where a detailed physical and geometrical reconstruction of structures is required prior to any excavation work. Often, due to the limited size and depth of an archaeological structure, it may be rather difficult to single out its position and extent because of the generally low signal‐to noise (S/N) ratio. This can be overcome by improving data acquisition and processing techniques and integrating different geophysical methods. In this work the results of a multimethodological surveys, used with the aim of detecting sharp discontinuities (boundary of cavities and fractures in the host medium) at the Archaeological Test Site of Sabine Necropolis at Research Area of National Research Council of Rome (Montelibretti, Italy) are shown. For the survey a combination of passive and active methods (magnetic, ground‐penetrating radar (GPR), and dipole–dipole geoelectric (DDG)), topographical and three‐dimensional laser scanner surveys and archaeological excavations were used to study the state of conservation of underground tombs. With all geophysical methods a high‐resolution data acquisition was adopted with the aim of reconstructing a global vision of the study area. Signal processing and amplitude time‐slice representation techniques were used for the analysis of GPR data. The bi‐dimensional cross‐correlation technique was applied to enhance the S/N ratio of the magnetic data. An example of the integration (both qualitative and quantitative) of these results is presented for a portion of the investigated area in the Sabine Necropolis at Colle del Forno (Rome, Italy). Archaeological excavations were then conducted systematically after completing the geophysical surveys and interpretations (from 2000 to 2006), which confirmed the location and shape of the individual chamber tombs with associated corridors. Copyright © 2009 John Wiley & Sons, Ltd.