Kai Bröker
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Research Interests
Kai Bröker has a total of 178 co-authors. Here are the top co-authors by number of shared publications:
Marian Hertrich
Department of Earth Sciences, ETH Zürich, Zürich, Switzerland
24 shared publications- Antonio Pio Rinaldi
Swiss Seismological Service, ETH Zurich, Zurich, Switzerland
17 shared publications - Anne Obermann
Swiss Seismological Service ETH Zurich Zurich Switzerland
15 shared publications - Linus Villiger
Swiss Seismological Service, ETH Zurich, Zurich, Switzerland
15 shared publications Nima Gholizadeh Doonechaly
Institute for Geophysics ETH Zurich Zurich Switzerland
15 shared publications- Alexis Shakas
Department of Earth Sciences, ETH Zürich, Zürich, Switzerland
12 shared publications
Latest Publications
- Open Access
- 15 October 2026
- Published by Copernicus GmbH in Solid Earth
- Vol. 17 (10) , 1139-1165
Understanding spatial and temporal evolution of progressive excavation damage zone in granitic rocks – development of a novel mine-by and laboratory experimental framework at the BedrettoLab
Brittle damage around tunnels in the form of spalling is common in massive crystalline rocks subjected to high in-situ stresses. Understanding the short-term development and long-term evolution of the Excavation Damage Zone (EDZ) is particularly important for deep geological repositories (DGRs) for heat-generating nuclear waste, as the EDZ may provide preferential pathways for radionuclide migration. This paper presents an overview of the PRECODE mine-by experiment at BedrettoLab, a newly developed underground research laboratory (URL) in southern Switzerland designed to investigate brittle fracturing and EDZ evolution in crystalline rocks under repository-relevant conditions. The PRECODE tunnel was excavated in Rotondo Granite using both controlled drill-and-blast (D&B) and line-drilling and rock-breaking (LDRB) methods to evaluate the influence of excavation technique on EDZ characteristics. The experiment combines multidisciplinary in-situ monitoring including acoustic emission, distributed acoustic and strain sensing, hydraulic monitoring, electrical resistivity tomography, and terrestrial laser scanning with laboratory-based fracture mechanics and time-dependent testing under varying environmental conditions. The main objectives are to characterize short-term EDZ formation, investigate long-term crack growth and stress corrosion processes, quantify permeability evolution, and assess the interaction between excavation-induced damage and nearby fault zones. Preliminary results indicate clear differences in AE activity and EDZ development between excavation methods, while observations from the mature EDZ of the more than 40-year-old Bedretto Tunnel suggest ongoing time-dependent brittle fracturing. The coupled in-situ and laboratory datasets provide a unique basis for improving predictive models and long-term safety assessments for nuclear waste repositories in crystalline rocks.
- 15 October 2026
- Published by Copernicus GmbH in Solid Earth
- Vol. 17 (10) , 1139-1165
Open AccessUnderstanding spatial and temporal evolution of progressive excavation damage zone in granitic rocks – development of a novel mine-by and laboratory experimental framework at the BedrettoLab
Brittle damage around tunnels in the form of spalling is common in massive crystalline rocks subjected to high in-situ stresses. Understanding the short-term development and long-term evolution of the Excavation Damage Zone (EDZ) is particularly important for deep geological repositories (DGRs) for heat-generating nuclear waste, as the EDZ may provide preferential pathways for radionuclide migration. This paper presents an overview of the PRECODE mine-by experiment at BedrettoLab, a newly developed underground research laboratory (URL) in southern Switzerland designed to investigate brittle fracturing and EDZ evolution in crystalline rocks under repository-relevant conditions. The PRECODE tunnel was excavated in Rotondo Granite using both controlled drill-and-blast (D&B) and line-drilling and rock-breaking (LDRB) methods to evaluate the influence of excavation technique on EDZ characteristics. The experiment combines multidisciplinary in-situ monitoring including acoustic emission, distributed acoustic and strain sensing, hydraulic monitoring, electrical resistivity tomography, and terrestrial laser scanning with laboratory-based fracture mechanics and time-dependent testing under varying environmental conditions. The main objectives are to characterize short-term EDZ formation, investigate long-term crack growth and stress corrosion processes, quantify permeability evolution, and assess the interaction between excavation-induced damage and nearby fault zones. Preliminary results indicate clear differences in AE activity and EDZ development between excavation methods, while observations from the mature EDZ of the more than 40-year-old Bedretto Tunnel suggest ongoing time-dependent brittle fracturing. The coupled in-situ and laboratory datasets provide a unique basis for improving predictive models and long-term safety assessments for nuclear waste repositories in crystalline rocks.
- Open Access
- 2 September 2026
- Published by Copernicus GmbH
- p. 1-34
Comment on egusphere-2026-3474
The brittle damage around tunnels in the form of spalling is common in massive crystalline rocks subjected to high in-situ stresses. Understanding the short-term development and long-term evolution of the Excavation Damage Zone (EDZ) is particularly important for deep geological repositories (DGRs) for heat-generating nuclear waste, as the EDZ may provide preferential pathways for radionuclide migration. This paper presents an overview of the PRECODE mine-by experiment at BedrettoLab, a newly developed underground research laboratory (URL) in southern Switzerland designed to investigate brittle fracturing and EDZ evolution in crystalline rocks under repository-relevant conditions. The PRECODE tunnel was excavated in Rotondo Granite using both controlled drill-and-blast (D&B) and line-drilling and rock-breaking (LDRB) methods to evaluate the influence of excavation technique on EDZ characteristics. The experiment combines multidisciplinary in-situ monitoring including acoustic emission, distributed acoustic and strain sensing, hydraulic monitoring, electrical resistivity tomography, and terrestrial laser scanning with laboratory-based fracture mechanics and time-dependent testing under varying environmental conditions. The main objectives are to characterize short-term EDZ formation, investigate long-term crack growth and stress corrosion processes, quantify permeability evolution, and assess the interaction between excavation-induced damage and nearby fault zones. Preliminary results indicate clear differences in AE activity and EDZ development between excavation methods, while observations from the mature EDZ of the more than 40-year-old Bedretto Tunnel suggest ongoing time-dependent brittle fracturing. The coupled in-situ and laboratory datasets provide a unique basis for improving predictive models and long-term safety assessments for nuclear waste repositories in crystalline rocks.
- 2 September 2026
- Published by Copernicus GmbH
- p. 1-34
Open AccessComment on egusphere-2026-3474
The brittle damage around tunnels in the form of spalling is common in massive crystalline rocks subjected to high in-situ stresses. Understanding the short-term development and long-term evolution of the Excavation Damage Zone (EDZ) is particularly important for deep geological repositories (DGRs) for heat-generating nuclear waste, as the EDZ may provide preferential pathways for radionuclide migration. This paper presents an overview of the PRECODE mine-by experiment at BedrettoLab, a newly developed underground research laboratory (URL) in southern Switzerland designed to investigate brittle fracturing and EDZ evolution in crystalline rocks under repository-relevant conditions. The PRECODE tunnel was excavated in Rotondo Granite using both controlled drill-and-blast (D&B) and line-drilling and rock-breaking (LDRB) methods to evaluate the influence of excavation technique on EDZ characteristics. The experiment combines multidisciplinary in-situ monitoring including acoustic emission, distributed acoustic and strain sensing, hydraulic monitoring, electrical resistivity tomography, and terrestrial laser scanning with laboratory-based fracture mechanics and time-dependent testing under varying environmental conditions. The main objectives are to characterize short-term EDZ formation, investigate long-term crack growth and stress corrosion processes, quantify permeability evolution, and assess the interaction between excavation-induced damage and nearby fault zones. Preliminary results indicate clear differences in AE activity and EDZ development between excavation methods, while observations from the mature EDZ of the more than 40-year-old Bedretto Tunnel suggest ongoing time-dependent brittle fracturing. The coupled in-situ and laboratory datasets provide a unique basis for improving predictive models and long-term safety assessments for nuclear waste repositories in crystalline rocks.
- Open Access
- 26 August 2026
- Published by Copernicus GmbH
- Vol. 2026, 1-34
Comment on egusphere-2026-3474
The brittle damage around tunnels in the form of spalling is common in massive crystalline rocks subjected to high in-situ stresses. Understanding the short-term development and long-term evolution of the Excavation Damage Zone (EDZ) is particularly important for deep geological repositories (DGRs) for heat-generating nuclear waste, as the EDZ may provide preferential pathways for radionuclide migration. This paper presents an overview of the PRECODE mine-by experiment at BedrettoLab, a newly developed underground research laboratory (URL) in southern Switzerland designed to investigate brittle fracturing and EDZ evolution in crystalline rocks under repository-relevant conditions. The PRECODE tunnel was excavated in Rotondo Granite using both controlled drill-and-blast (D&B) and line-drilling and rock-breaking (LDRB) methods to evaluate the influence of excavation technique on EDZ characteristics. The experiment combines multidisciplinary in-situ monitoring including acoustic emission, distributed acoustic and strain sensing, hydraulic monitoring, electrical resistivity tomography, and terrestrial laser scanning with laboratory-based fracture mechanics and time-dependent testing under varying environmental conditions. The main objectives are to characterize short-term EDZ formation, investigate long-term crack growth and stress corrosion processes, quantify permeability evolution, and assess the interaction between excavation-induced damage and nearby fault zones. Preliminary results indicate clear differences in AE activity and EDZ development between excavation methods, while observations from the mature EDZ of the more than 40-year-old Bedretto Tunnel suggest ongoing time-dependent brittle fracturing. The coupled in-situ and laboratory datasets provide a unique basis for improving predictive models and long-term safety assessments for nuclear waste repositories in crystalline rocks.
- 26 August 2026
- Published by Copernicus GmbH
- Vol. 2026, 1-34
Open AccessComment on egusphere-2026-3474
The brittle damage around tunnels in the form of spalling is common in massive crystalline rocks subjected to high in-situ stresses. Understanding the short-term development and long-term evolution of the Excavation Damage Zone (EDZ) is particularly important for deep geological repositories (DGRs) for heat-generating nuclear waste, as the EDZ may provide preferential pathways for radionuclide migration. This paper presents an overview of the PRECODE mine-by experiment at BedrettoLab, a newly developed underground research laboratory (URL) in southern Switzerland designed to investigate brittle fracturing and EDZ evolution in crystalline rocks under repository-relevant conditions. The PRECODE tunnel was excavated in Rotondo Granite using both controlled drill-and-blast (D&B) and line-drilling and rock-breaking (LDRB) methods to evaluate the influence of excavation technique on EDZ characteristics. The experiment combines multidisciplinary in-situ monitoring including acoustic emission, distributed acoustic and strain sensing, hydraulic monitoring, electrical resistivity tomography, and terrestrial laser scanning with laboratory-based fracture mechanics and time-dependent testing under varying environmental conditions. The main objectives are to characterize short-term EDZ formation, investigate long-term crack growth and stress corrosion processes, quantify permeability evolution, and assess the interaction between excavation-induced damage and nearby fault zones. Preliminary results indicate clear differences in AE activity and EDZ development between excavation methods, while observations from the mature EDZ of the more than 40-year-old Bedretto Tunnel suggest ongoing time-dependent brittle fracturing. The coupled in-situ and laboratory datasets provide a unique basis for improving predictive models and long-term safety assessments for nuclear waste repositories in crystalline rocks.
- Open Access
- 7 August 2026
- Published by Copernicus GmbH
- p. 1-34
Comment on egusphere-2026-3474
The brittle damage around tunnels in the form of spalling is common in massive crystalline rocks subjected to high in-situ stresses. Understanding the short-term development and long-term evolution of the Excavation Damage Zone (EDZ) is particularly important for deep geological repositories (DGRs) for heat-generating nuclear waste, as the EDZ may provide preferential pathways for radionuclide migration. This paper presents an overview of the PRECODE mine-by experiment at BedrettoLab, a newly developed underground research laboratory (URL) in southern Switzerland designed to investigate brittle fracturing and EDZ evolution in crystalline rocks under repository-relevant conditions. The PRECODE tunnel was excavated in Rotondo Granite using both controlled drill-and-blast (D&B) and line-drilling and rock-breaking (LDRB) methods to evaluate the influence of excavation technique on EDZ characteristics. The experiment combines multidisciplinary in-situ monitoring including acoustic emission, distributed acoustic and strain sensing, hydraulic monitoring, electrical resistivity tomography, and terrestrial laser scanning with laboratory-based fracture mechanics and time-dependent testing under varying environmental conditions. The main objectives are to characterize short-term EDZ formation, investigate long-term crack growth and stress corrosion processes, quantify permeability evolution, and assess the interaction between excavation-induced damage and nearby fault zones. Preliminary results indicate clear differences in AE activity and EDZ development between excavation methods, while observations from the mature EDZ of the more than 40-year-old Bedretto Tunnel suggest ongoing time-dependent brittle fracturing. The coupled in-situ and laboratory datasets provide a unique basis for improving predictive models and long-term safety assessments for nuclear waste repositories in crystalline rocks.
- 7 August 2026
- Published by Copernicus GmbH
- p. 1-34
Open AccessComment on egusphere-2026-3474
The brittle damage around tunnels in the form of spalling is common in massive crystalline rocks subjected to high in-situ stresses. Understanding the short-term development and long-term evolution of the Excavation Damage Zone (EDZ) is particularly important for deep geological repositories (DGRs) for heat-generating nuclear waste, as the EDZ may provide preferential pathways for radionuclide migration. This paper presents an overview of the PRECODE mine-by experiment at BedrettoLab, a newly developed underground research laboratory (URL) in southern Switzerland designed to investigate brittle fracturing and EDZ evolution in crystalline rocks under repository-relevant conditions. The PRECODE tunnel was excavated in Rotondo Granite using both controlled drill-and-blast (D&B) and line-drilling and rock-breaking (LDRB) methods to evaluate the influence of excavation technique on EDZ characteristics. The experiment combines multidisciplinary in-situ monitoring including acoustic emission, distributed acoustic and strain sensing, hydraulic monitoring, electrical resistivity tomography, and terrestrial laser scanning with laboratory-based fracture mechanics and time-dependent testing under varying environmental conditions. The main objectives are to characterize short-term EDZ formation, investigate long-term crack growth and stress corrosion processes, quantify permeability evolution, and assess the interaction between excavation-induced damage and nearby fault zones. Preliminary results indicate clear differences in AE activity and EDZ development between excavation methods, while observations from the mature EDZ of the more than 40-year-old Bedretto Tunnel suggest ongoing time-dependent brittle fracturing. The coupled in-situ and laboratory datasets provide a unique basis for improving predictive models and long-term safety assessments for nuclear waste repositories in crystalline rocks.
- Open Access
- 3 August 2026
- Published by Copernicus GmbH in EGUsphere
- Vol. 2026, 1-34
Understanding Spatial and Temporal Evolution of Progressive Excavation Damage Zone in Granitic Rocks – Development of a Novel Mine-by and Laboratory Experimental Framework at the BedrettoLab
The brittle damage around tunnels in the form of spalling is common in massive crystalline rocks subjected to high in-situ stresses. Understanding the short-term development and long-term evolution of the Excavation Damage Zone (EDZ) is particularly important for deep geological repositories (DGRs) for heat-generating nuclear waste, as the EDZ may provide preferential pathways for radionuclide migration. This paper presents an overview of the PRECODE mine-by experiment at BedrettoLab, a newly developed underground research laboratory (URL) in southern Switzerland designed to investigate brittle fracturing and EDZ evolution in crystalline rocks under repository-relevant conditions. The PRECODE tunnel was excavated in Rotondo Granite using both controlled drill-and-blast (D&B) and line-drilling and rock-breaking (LDRB) methods to evaluate the influence of excavation technique on EDZ characteristics. The experiment combines multidisciplinary in-situ monitoring including acoustic emission, distributed acoustic and strain sensing, hydraulic monitoring, electrical resistivity tomography, and terrestrial laser scanning with laboratory-based fracture mechanics and time-dependent testing under varying environmental conditions. The main objectives are to characterize short-term EDZ formation, investigate long-term crack growth and stress corrosion processes, quantify permeability evolution, and assess the interaction between excavation-induced damage and nearby fault zones. Preliminary results indicate clear differences in AE activity and EDZ development between excavation methods, while observations from the mature EDZ of the more than 40-year-old Bedretto Tunnel suggest ongoing time-dependent brittle fracturing. The coupled in-situ and laboratory datasets provide a unique basis for improving predictive models and long-term safety assessments for nuclear waste repositories in crystalline rocks.
- 3 August 2026
- Published by Copernicus GmbH in EGUsphere
- Vol. 2026, 1-34
Open AccessUnderstanding Spatial and Temporal Evolution of Progressive Excavation Damage Zone in Granitic Rocks – Development of a Novel Mine-by and Laboratory Experimental Framework at the BedrettoLab
The brittle damage around tunnels in the form of spalling is common in massive crystalline rocks subjected to high in-situ stresses. Understanding the short-term development and long-term evolution of the Excavation Damage Zone (EDZ) is particularly important for deep geological repositories (DGRs) for heat-generating nuclear waste, as the EDZ may provide preferential pathways for radionuclide migration. This paper presents an overview of the PRECODE mine-by experiment at BedrettoLab, a newly developed underground research laboratory (URL) in southern Switzerland designed to investigate brittle fracturing and EDZ evolution in crystalline rocks under repository-relevant conditions. The PRECODE tunnel was excavated in Rotondo Granite using both controlled drill-and-blast (D&B) and line-drilling and rock-breaking (LDRB) methods to evaluate the influence of excavation technique on EDZ characteristics. The experiment combines multidisciplinary in-situ monitoring including acoustic emission, distributed acoustic and strain sensing, hydraulic monitoring, electrical resistivity tomography, and terrestrial laser scanning with laboratory-based fracture mechanics and time-dependent testing under varying environmental conditions. The main objectives are to characterize short-term EDZ formation, investigate long-term crack growth and stress corrosion processes, quantify permeability evolution, and assess the interaction between excavation-induced damage and nearby fault zones. Preliminary results indicate clear differences in AE activity and EDZ development between excavation methods, while observations from the mature EDZ of the more than 40-year-old Bedretto Tunnel suggest ongoing time-dependent brittle fracturing. The coupled in-situ and laboratory datasets provide a unique basis for improving predictive models and long-term safety assessments for nuclear waste repositories in crystalline rocks.
- Open Access
- 19 July 2026
- Published by American Geophysical Union (AGU) in Journal of Geophysical Research: Solid Earth
- Vol. 131 (7)
Hydraulic Stimulation Experiments Attempting to Enhance Induced Seismicity for Earthquake Physics Research
Improving our understanding of induced and natural earthquakes benefits from controlled experiments in insitu laboratories. To investigate the processes during an Mw∼0 earthquake, we performed the “ Mzero ” experiments in a densely instrumented testbed of the Bedretto Underground Laboratory. These multi‐day hydraulic stimulation experiments went the opposite direction to typical induced seismicity research in that they were designed to enhance seismic rupture. In the first experiment, MzeroA, the rock mass was preconditioned by injecting water for 4 days at a pressure just below fracture reactivation pressure followed by a hydraulic stimulation above reactivation pressure. This strategy aimed at increasing the fractures area near critical stress conditions for shear failure, thus facilitating larger ruptures. During MzeroA, an event with Mw–0.54 was induced, followed by a distinct aftershock sequence. This event was one magnitude unit larger than any preceding event. In the second experiment, MzeroB, stimulation was initiated directly, without preconditioning. Compared to MzeroA, MzeroB exhibited higher seismicity rates, a larger seismicity cloud, and a pronounced migrating seismicity front. Combining seismological and hydromechanical observations, we discuss mechanisms that may have influenced the contrasting seismicity responses. In addition to fluid preconditiong, stress transfer from the Mw–0.54 mainshock, and natural seasonal pressure changes, may have contributed to modulating the seismogenic response. However, the relative importance of these processes remains uncertain given experimental limitations. Our results highlight both the potential and challenge of designing hydraulic stimulations to enhance or suppress seismic rupture, with implications for earthquake physics and induced seismicity.
- 19 July 2026
- Published by American Geophysical Union (AGU) in Journal of Geophysical Research: Solid Earth
- Vol. 131 (7)
Open AccessHydraulic Stimulation Experiments Attempting to Enhance Induced Seismicity for Earthquake Physics Research
Improving our understanding of induced and natural earthquakes benefits from controlled experiments in insitu laboratories. To investigate the processes during an Mw∼0 earthquake, we performed the “ Mzero ” experiments in a densely instrumented testbed of the Bedretto Underground Laboratory. These multi‐day hydraulic stimulation experiments went the opposite direction to typical induced seismicity research in that they were designed to enhance seismic rupture. In the first experiment, MzeroA, the rock mass was preconditioned by injecting water for 4 days at a pressure just below fracture reactivation pressure followed by a hydraulic stimulation above reactivation pressure. This strategy aimed at increasing the fractures area near critical stress conditions for shear failure, thus facilitating larger ruptures. During MzeroA, an event with Mw–0.54 was induced, followed by a distinct aftershock sequence. This event was one magnitude unit larger than any preceding event. In the second experiment, MzeroB, stimulation was initiated directly, without preconditioning. Compared to MzeroA, MzeroB exhibited higher seismicity rates, a larger seismicity cloud, and a pronounced migrating seismicity front. Combining seismological and hydromechanical observations, we discuss mechanisms that may have influenced the contrasting seismicity responses. In addition to fluid preconditiong, stress transfer from the Mw–0.54 mainshock, and natural seasonal pressure changes, may have contributed to modulating the seismogenic response. However, the relative importance of these processes remains uncertain given experimental limitations. Our results highlight both the potential and challenge of designing hydraulic stimulations to enhance or suppress seismic rupture, with implications for earthquake physics and induced seismicity.
- Open Access
- 14 July 2026
- Published by Elsevier in International Journal of Rock Mechanics and Mining Sciences
- Vol. 206
Continuous spatial stress variations within a granitic rock mass: Revealed by cross-sectional ellipticity of an array of boreholes
- 14 July 2026
- Published by Elsevier in International Journal of Rock Mechanics and Mining Sciences
- Vol. 206
Open AccessContinuous spatial stress variations within a granitic rock mass: Revealed by cross-sectional ellipticity of an array of boreholes
- Open Access
- 26 March 2026
- Published by Elsevier in International Journal of Rock Mechanics and Mining Sciences
- Vol. 202
In situ quantification of fracture slip induced by hydraulic injections in a deep borehole: A comparison of two different borehole techniques
- 26 March 2026
- Published by Elsevier in International Journal of Rock Mechanics and Mining Sciences
- Vol. 202
Open AccessIn situ quantification of fracture slip induced by hydraulic injections in a deep borehole: A comparison of two different borehole techniques
- Open Access
- 14 March 2026
- Published by Copernicus GmbH
New borehole-based techniques for in situ stress measurement and related thermo-hydro-mechanical processes
Accurate in situ stress characterization is essential for predicting the subsurface response to interventions such as underground construction, fluid injection, and fluid extraction. At depths of 2–5 km, which are typical of many such projects, the stress field is often heterogeneous and influenced by complex geological features. This makes reliable stress measurement both operationally critical and technically challenging. Borehole stability is another key concern, as deep boreholes are prone to stress-induced deformations such as breakouts that can damage equipment, impede drilling, and even lead to borehole collapse.We present results and ongoing developments from two projects focused on novel in situ stress measurement techniques and thermo-hydro-mechanical processes around boreholes. These projects are based on experiments conducted at the Bedretto Underground Laboratory (BedrettoLab) in Switzerland (Ma et al., 2022). The BedrettoLab offers multiple boreholes, up to 400 m in length, located within a fractured granitic rock mass with an overburden of more than 1000 m.The first project developed an improved technique to estimate the full stress tensor by inverting three-dimensional displacement data obtained during fluid injections in isolated borehole intervals (Bröker et al., 2025). A total of eleven test intervals were investigated, with displacements measured using a SIMFIP (Step-rate Injection Method for Fracture In situ Properties) probe. The results yield a complete stress profile obtained along approximately 60 m of an inclined borehole, revealing significant stress heterogeneity and rotations around an intersected fault zone.In the second project, we developed a novel borehole probe to investigate the formation of thermally induced breakouts, which are strongly controlled by the in situ stress field. The probe can heat a packed-off borehole section while measuring borehole wall displacement. After extensive calibration in the laboratory, the probe was deployed in the BedrettoLab, and three in situ heating tests were successfully conducted up to 140 °C. Although no borehole breakouts were induced, the experiments provide valuable insight into thermo-hydro-mechanical coupling at borehole walls and its role in breakout initiation and borehole stability.References:Bröker, K., Guglielmi, Y., Soom, F., Cook, P., Hertrich, M., & Valley, B. (2025). In situ quantification of fracture slip induced by hydraulic injections in a deep borehole: A comparison of two different borehole techniques. Submitted to IJRMMS. https://doi.org/10.2139/ssrn.5967430Ma, X., Hertrich, M., Amann, F., Bröker, K., Gholizadeh Doonechaly, N., Gischig, V., Hochreutener, R., Kästli, P., Krietsch, H., Marti, M., Nägeli, B., Nejati, M., Obermann, A., Plenkers, K., Rinaldi, A. P., Shakas, A., Villiger, L., Wenning, Q., Zappone, A., et al. (2022). Multi-disciplinary characterizations of the BedrettoLab – a new underground geoscience research facility. Solid Earth, 13(2), 301–322. https://doi.org/10.5194/se-13-301-2022
- 14 March 2026
- Published by Copernicus GmbH
Open AccessNew borehole-based techniques for in situ stress measurement and related thermo-hydro-mechanical processes
Accurate in situ stress characterization is essential for predicting the subsurface response to interventions such as underground construction, fluid injection, and fluid extraction. At depths of 2–5 km, which are typical of many such projects, the stress field is often heterogeneous and influenced by complex geological features. This makes reliable stress measurement both operationally critical and technically challenging. Borehole stability is another key concern, as deep boreholes are prone to stress-induced deformations such as breakouts that can damage equipment, impede drilling, and even lead to borehole collapse.We present results and ongoing developments from two projects focused on novel in situ stress measurement techniques and thermo-hydro-mechanical processes around boreholes. These projects are based on experiments conducted at the Bedretto Underground Laboratory (BedrettoLab) in Switzerland (Ma et al., 2022). The BedrettoLab offers multiple boreholes, up to 400 m in length, located within a fractured granitic rock mass with an overburden of more than 1000 m.The first project developed an improved technique to estimate the full stress tensor by inverting three-dimensional displacement data obtained during fluid injections in isolated borehole intervals (Bröker et al., 2025). A total of eleven test intervals were investigated, with displacements measured using a SIMFIP (Step-rate Injection Method for Fracture In situ Properties) probe. The results yield a complete stress profile obtained along approximately 60 m of an inclined borehole, revealing significant stress heterogeneity and rotations around an intersected fault zone.In the second project, we developed a novel borehole probe to investigate the formation of thermally induced breakouts, which are strongly controlled by the in situ stress field. The probe can heat a packed-off borehole section while measuring borehole wall displacement. After extensive calibration in the laboratory, the probe was deployed in the BedrettoLab, and three in situ heating tests were successfully conducted up to 140 °C. Although no borehole breakouts were induced, the experiments provide valuable insight into thermo-hydro-mechanical coupling at borehole walls and its role in breakout initiation and borehole stability.References:Bröker, K., Guglielmi, Y., Soom, F., Cook, P., Hertrich, M., & Valley, B. (2025). In situ quantification of fracture slip induced by hydraulic injections in a deep borehole: A comparison of two different borehole techniques. Submitted to IJRMMS. https://doi.org/10.2139/ssrn.5967430Ma, X., Hertrich, M., Amann, F., Bröker, K., Gholizadeh Doonechaly, N., Gischig, V., Hochreutener, R., Kästli, P., Krietsch, H., Marti, M., Nägeli, B., Nejati, M., Obermann, A., Plenkers, K., Rinaldi, A. P., Shakas, A., Villiger, L., Wenning, Q., Zappone, A., et al. (2022). Multi-disciplinary characterizations of the BedrettoLab – a new underground geoscience research facility. Solid Earth, 13(2), 301–322. https://doi.org/10.5194/se-13-301-2022
- Open Access
- 14 March 2026
- Published by Copernicus GmbH
Fault Network Activation During Controlled Hydraulic Stimulation Experiments in the BedrettoLab
Understanding how faults are activated and earthquakes are triggered is still a central challenge in seismology and seismic hazard assessment. Controlled hydraulic stimulation experiments offer a valuable opportunity to study these processes under well-constrained conditions and at spatial and temporal resolutions that are rarely achievable in natural settings. In this study, we present the results of three hydraulic stimulations experiments conducted at the Bedretto Underground Laboratory and monitored by a dense, high-sensitivity seismic network.These experiments revealed a complex spatio-temporal evolution of induced seismicity, characterized by the activation of a multi-segment fault network. Two dominant seismic clusters were activated early on and show a clear spatial connection to the injection borehole, suggesting that pore pressure is the main driver of seismicity within these clusters. At later stages, a third cluster with a different orientation was activated, despite showing no obvious direct hydraulic connection to the injection interval. Seismicity within this cluster occurred with a temporal delay compared to the other two clusters. This suggests that the fault activation was likely driven by indirect processes such as aseismic deformation, stress transfer, and delayed fluid migration.The observed fault network activation closely resembles patterns commonly reported in natural earthquake sequences. These findings suggest that the physical mechanisms controlling fault reactivation and earthquake triggering are largely independent of scale, linking controlled field experiments and natural earthquakes. Our results emphasize the importance of fault network geometry and stress interactions in understanding induced and natural seismicity.
- 14 March 2026
- Published by Copernicus GmbH
Open AccessFault Network Activation During Controlled Hydraulic Stimulation Experiments in the BedrettoLab
Understanding how faults are activated and earthquakes are triggered is still a central challenge in seismology and seismic hazard assessment. Controlled hydraulic stimulation experiments offer a valuable opportunity to study these processes under well-constrained conditions and at spatial and temporal resolutions that are rarely achievable in natural settings. In this study, we present the results of three hydraulic stimulations experiments conducted at the Bedretto Underground Laboratory and monitored by a dense, high-sensitivity seismic network.These experiments revealed a complex spatio-temporal evolution of induced seismicity, characterized by the activation of a multi-segment fault network. Two dominant seismic clusters were activated early on and show a clear spatial connection to the injection borehole, suggesting that pore pressure is the main driver of seismicity within these clusters. At later stages, a third cluster with a different orientation was activated, despite showing no obvious direct hydraulic connection to the injection interval. Seismicity within this cluster occurred with a temporal delay compared to the other two clusters. This suggests that the fault activation was likely driven by indirect processes such as aseismic deformation, stress transfer, and delayed fluid migration.The observed fault network activation closely resembles patterns commonly reported in natural earthquake sequences. These findings suggest that the physical mechanisms controlling fault reactivation and earthquake triggering are largely independent of scale, linking controlled field experiments and natural earthquakes. Our results emphasize the importance of fault network geometry and stress interactions in understanding induced and natural seismicity.