Mohamed Abdel-Monem Tawfik
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Mohamed Abdel-Monem Tawfik has a total of 24 co-authors. Here are the top co-authors by number of shared publications:
- Ahmed Sobhy Salem
Professor of Oral and Maxillofacial Surgery, Faculty of Dentistry, Mansoura University, Mansoura, Egypt
3 shared publications - Ayman Ahmed Yaseen
Department of Oral and Maxillofacial Surgery, Faculty of Dentistry, Mansoura University, Mansoura, Egypt
3 shared publications - Ehab Abdelfadil
Department of Oral and Maxillofacial Surgery, Faculty of Dentistry, Mansoura University, Mansoura 35516, Egypt
2 shared publications Mohammed A.Q. Al-Saleh
Montreal, Quebec, Canada
2 shared publications- Muhammad Ibrahim Sakr
Lecturer of Oral and Maxillofacial Surgery, Faculty of Oral and Dental Medicine, Delta University for Science and Technology, Egypt
2 shared publications - Noha Mansour
Associate Professor of Oral and Maxillofacial Surgery, Mansoura University, Mansoura, Egypt
2 shared publications
Latest Publications
- Open Access
- 29 June 2026
- Published by Springer Nature in BMC Oral Health
- Vol. 26 (1)
Extended platelet rich fibrin versus allograft as a space filling material in immediate dental implant placement
Background: Immediate implant has been one of the solutions to decrease bone resorption after tooth extraction. Gap distance between the dental implant and adjacent bone has undergone much research to enhance bone formation in this area. This is small exploratory study that aimed to compare the efficacy of extended platelet rich fibrin (e-PRF) a regenerative biomaterial produced by heating platelet-poor plasma (PPP) to denature albumin, extending the resorption time of standard PRF from 2 to 3 weeks to 4–6 months, as well as allograft as a space filling material in immediate dental implant placement. Patients and Methods: Twenty-eight implants were placed for the prosthetic replacement of non-restorable single-rooted maxillary teeth using immediate implant placement. Patients were randomly allocated into two equal groups ( n = 14 each). In Group I, allograft was placed in the peri-implant gap, whereas in Group II, e-PRF was used. Implant stability was assessed using resonance frequency analysis (RFA). Buccal bone thickness and marginal bone loss were evaluated using CBCT throughout the follow-up period. Statistical analysis was performed on all clinical and radiographic data. Results: A total of 28 patients received 28 immediate implants in the maxillary esthetic zone. During the 12-month follow-up period, all implants were successful with no complications. No statistically significant differences were observed between the groups regarding implant stability, marginal bone loss, or buccal bone thickness. Conclusion: Within this small exploratory trial, no statistically significant intergroup differences were detected between e-PRF and allograft as space-filling materials around immediate implants regarding stability, marginal bone loss, and buccal bone thickness. Trial registration: Clinical-Trials.gov PRS ( https://register.clinicaltrials.gov ) has this study registered under the identifier number. NCT07445776 on 03/02/2026.
- 29 June 2026
- Published by Springer Nature in BMC Oral Health
- Vol. 26 (1)
Open AccessExtended platelet rich fibrin versus allograft as a space filling material in immediate dental implant placement
Background: Immediate implant has been one of the solutions to decrease bone resorption after tooth extraction. Gap distance between the dental implant and adjacent bone has undergone much research to enhance bone formation in this area. This is small exploratory study that aimed to compare the efficacy of extended platelet rich fibrin (e-PRF) a regenerative biomaterial produced by heating platelet-poor plasma (PPP) to denature albumin, extending the resorption time of standard PRF from 2 to 3 weeks to 4–6 months, as well as allograft as a space filling material in immediate dental implant placement. Patients and Methods: Twenty-eight implants were placed for the prosthetic replacement of non-restorable single-rooted maxillary teeth using immediate implant placement. Patients were randomly allocated into two equal groups ( n = 14 each). In Group I, allograft was placed in the peri-implant gap, whereas in Group II, e-PRF was used. Implant stability was assessed using resonance frequency analysis (RFA). Buccal bone thickness and marginal bone loss were evaluated using CBCT throughout the follow-up period. Statistical analysis was performed on all clinical and radiographic data. Results: A total of 28 patients received 28 immediate implants in the maxillary esthetic zone. During the 12-month follow-up period, all implants were successful with no complications. No statistically significant differences were observed between the groups regarding implant stability, marginal bone loss, or buccal bone thickness. Conclusion: Within this small exploratory trial, no statistically significant intergroup differences were detected between e-PRF and allograft as space-filling materials around immediate implants regarding stability, marginal bone loss, and buccal bone thickness. Trial registration: Clinical-Trials.gov PRS ( https://register.clinicaltrials.gov ) has this study registered under the identifier number. NCT07445776 on 03/02/2026.
- 20 April 2026
- Published by Elsevier in Journal of Oral and Maxillofacial Surgery
- Vol. 84 (8) , 1273-1285
Efficacy of Custom-Made Zirconia Sheet Versus Polytetrafluoroethylene as a Non-resorbable Barrier in Maxillary Alveolar Ridge Augmentation: A Randomized Clinical Trial
- 20 April 2026
- Published by Elsevier in Journal of Oral and Maxillofacial Surgery
- Vol. 84 (8) , 1273-1285
Efficacy of Custom-Made Zirconia Sheet Versus Polytetrafluoroethylene as a Non-resorbable Barrier in Maxillary Alveolar Ridge Augmentation: A Randomized Clinical Trial
- Open Access
- 18 July 2025
- Published by Springer Nature in BMC Oral Health
- Vol. 25 (1) , 1200
Early postoperative evaluation of an open-source digital workflow for designing custom-made zirconia membranes in maxillary guided bone regeneration
Background: Computer-guided surgery has played a crucial role in planning alveolar ridge augmentation. In the last decade, various software programs have been used in computer-guided fabricated nonresorbable membranes, including zirconia membranes, for guided bone regeneration. However, most of these software programs are not free of charge. Objectives: This study aimed to evaluate clinically and radiographically the accuracy of an open-source digital workflow for designing custom-made zirconia membranes for maxillary guided bone regeneration. Materials and methods: Twelve custom-made zirconia membranes were designed for 12 patients with maxillary alveolar defects via the integration of two free open-source software programs (Blue Sky Plan® and Autodesk Meshmixer®) via a preoperative cone beam computed tomography scan. All patients underwent maxillary alveolar bone augmentation via the designed membranes and particulate mixtures of 1:1 autogenous and xenogenic bone grafts. The membranes were evaluated intraoperatively and radiographically via an immediate postoperative cone beam computed tomography scan, and the collected data were statistically analysed. Results: All the membranes had accurate intraoperative fits, and there were no significant differences between the virtual and milled (actual) membranes in either the volumetric analysis or the linear horizontal and vertical measurements; the P values were (0.628, 0.226 and 0.239), respectively. The designing time was significantly reduced from 4 h for the first case to 22 min for the final case, while the (mean ± standard deviation) milling time was 28 min ± 11 min, and the (mean ± standard deviation) time of the whole digital workflow including membrane sterilization was 5 h and 20 min ± 1 h and 15 min. Conclusion: Zirconia membranes can be designed with free open-source software with outstanding clinical fit and promising radiographic results. Further research should be performed with larger sample sizes and other rigid Guided Bone Regeneration membrane materials. Trial registration number: NCT06227455. Trial first posted date: 26/1/2024 (Retrospectively registered).
- 18 July 2025
- Published by Springer Nature in BMC Oral Health
- Vol. 25 (1) , 1200
Open AccessEarly postoperative evaluation of an open-source digital workflow for designing custom-made zirconia membranes in maxillary guided bone regeneration
Background: Computer-guided surgery has played a crucial role in planning alveolar ridge augmentation. In the last decade, various software programs have been used in computer-guided fabricated nonresorbable membranes, including zirconia membranes, for guided bone regeneration. However, most of these software programs are not free of charge. Objectives: This study aimed to evaluate clinically and radiographically the accuracy of an open-source digital workflow for designing custom-made zirconia membranes for maxillary guided bone regeneration. Materials and methods: Twelve custom-made zirconia membranes were designed for 12 patients with maxillary alveolar defects via the integration of two free open-source software programs (Blue Sky Plan® and Autodesk Meshmixer®) via a preoperative cone beam computed tomography scan. All patients underwent maxillary alveolar bone augmentation via the designed membranes and particulate mixtures of 1:1 autogenous and xenogenic bone grafts. The membranes were evaluated intraoperatively and radiographically via an immediate postoperative cone beam computed tomography scan, and the collected data were statistically analysed. Results: All the membranes had accurate intraoperative fits, and there were no significant differences between the virtual and milled (actual) membranes in either the volumetric analysis or the linear horizontal and vertical measurements; the P values were (0.628, 0.226 and 0.239), respectively. The designing time was significantly reduced from 4 h for the first case to 22 min for the final case, while the (mean ± standard deviation) milling time was 28 min ± 11 min, and the (mean ± standard deviation) time of the whole digital workflow including membrane sterilization was 5 h and 20 min ± 1 h and 15 min. Conclusion: Zirconia membranes can be designed with free open-source software with outstanding clinical fit and promising radiographic results. Further research should be performed with larger sample sizes and other rigid Guided Bone Regeneration membrane materials. Trial registration number: NCT06227455. Trial first posted date: 26/1/2024 (Retrospectively registered).
- 1 October 2022
- Published by Egyptian Knowledge Bank in Egyptian Dental Journal
- Vol. 68 (4) , 3105-3115
Melatonin Application with Indirect Maxillary Sinus Lift and Simultaneous Implant Placement: A Promising New Approach
Objectives: Dental implants replacing missing teeth is of a big concern in the maxillary posterior region due to pneumatisation of the maxillary sinus. To overcome this problem, indirect maxillary sinus floor augmentation is the technique of choice. This pilot study compared the outcomes of indirect maxillary sinus lift and simultaneous implant placement with and without melatonin application. Materials and Methods: 20 patients with missing maxillary molars or premolars were selected to receive 20 dental two-pieces implants simultaneously with indirect maxillary sinus lifting using sinus crestal approach (SCA) kit. These 20 patients were randomly divided into two groups, where group 1 included patients who received local melatonin gel at osteotomy site while group 2 included patients who had no melatonin. Immediate implant stability test was performed using the Osstell Monitor . Patients were recalled for follow up at three, six, and nine months for clinical changes, three and nine months for radiographic evaluation. Results: All implants were considered successful after nine months of follow up. A high statistically significant difference in implant stability and bone density in group I with local melatonin application (P =0.0005), and both buccal and palatal sides bone density, P = 0.009 & 0.042, respectively. Conclusions: This pilot study is the first to test the indirect sinus lift technique combined with melatonin gel application and simultaneous implant placement. After nine months of follow up, predictable outcomes are evident in all patients who presented initially with posterior maxilla resorption due to sinus pneumatisation.
- 1 October 2022
- Published by Egyptian Knowledge Bank in Egyptian Dental Journal
- Vol. 68 (4) , 3105-3115
Melatonin Application with Indirect Maxillary Sinus Lift and Simultaneous Implant Placement: A Promising New Approach
Objectives: Dental implants replacing missing teeth is of a big concern in the maxillary posterior region due to pneumatisation of the maxillary sinus. To overcome this problem, indirect maxillary sinus floor augmentation is the technique of choice. This pilot study compared the outcomes of indirect maxillary sinus lift and simultaneous implant placement with and without melatonin application. Materials and Methods: 20 patients with missing maxillary molars or premolars were selected to receive 20 dental two-pieces implants simultaneously with indirect maxillary sinus lifting using sinus crestal approach (SCA) kit. These 20 patients were randomly divided into two groups, where group 1 included patients who received local melatonin gel at osteotomy site while group 2 included patients who had no melatonin. Immediate implant stability test was performed using the Osstell Monitor . Patients were recalled for follow up at three, six, and nine months for clinical changes, three and nine months for radiographic evaluation. Results: All implants were considered successful after nine months of follow up. A high statistically significant difference in implant stability and bone density in group I with local melatonin application (P =0.0005), and both buccal and palatal sides bone density, P = 0.009 & 0.042, respectively. Conclusions: This pilot study is the first to test the indirect sinus lift technique combined with melatonin gel application and simultaneous implant placement. After nine months of follow up, predictable outcomes are evident in all patients who presented initially with posterior maxilla resorption due to sinus pneumatisation.
- 1 August 2017
- Published by Elsevier in Journal of Oral and Maxillofacial Surgery
- Vol. 75 (8) , 1577-1578
In Reply
- 1 August 2017
- Published by Elsevier in Journal of Oral and Maxillofacial Surgery
- Vol. 75 (8) , 1577-1578
In Reply
- 1 June 2017
- Published by Elsevier in Journal of Oral and Maxillofacial Surgery
- Vol. 75 (6) , 1124-1135
Efficacy of Platelet-Rich Fibrin After Mandibular Third Molar Extraction: A Systematic Review and Meta-Analysis
- 1 June 2017
- Published by Elsevier in Journal of Oral and Maxillofacial Surgery
- Vol. 75 (6) , 1124-1135
Efficacy of Platelet-Rich Fibrin After Mandibular Third Molar Extraction: A Systematic Review and Meta-Analysis
- Open Access
- 1 January 2017
- Published by Elsevier in The Saudi Journal for Dental Research
- Vol. 8 (1-2) , 19-25
Clinical effects of platelet-rich fibrin (PRF) following surgical extraction of lower third molar
- 1 January 2017
- Published by Elsevier in The Saudi Journal for Dental Research
- Vol. 8 (1-2) , 19-25
Open AccessClinical effects of platelet-rich fibrin (PRF) following surgical extraction of lower third molar
- 1 April 2016
- Published by American Academy of Implant Dentistry in Journal of Oral Implantology
- Vol. 42 (2) , 119-125
Clinical and Radiographic Evaluation of Immediate Loaded Dental Implants With Local Application of Melatonin: A Preliminary Randomized Controlled Clinical Trial
Immediate loading of dental implants in situations where low bone density exist, such as the posterior maxillary region, became possible recently after the introduction of biomimetic agents. This 1-year preliminary clinical trial was carried out to clinically and radiographically evaluate immediate-loaded 1-piece implants with local application of melatonin in the osteotomy site as a biomimetic material. 14 patients with missing maxillary premolars were randomized to receive 14 implants of 1-piece type that were subjected to immediate loading after 2 weeks of initial placement. Group I included 7 implants with acid-etched surface while group II included 7 implants with acid-etched surface combined with local application of melatonin gel at the osteotomy site. Patients were recalled for follow up at 1, 3, 6, and 12 months after loading. All implants were considered successful after 12 months of follow-up. Significant difference (P < 0.05) was found between both groups at 1 month of implant loading when considering the implant stability. At 1 and 3 months there were significant differences in the marginal bone level between the 2 groups. These results suggest that the local application of melatonin at the osteotomy site is associated with good stability and minimal bone resorption. However, more studies for longer follow-up periods are required to confirm the effect of melatonin hormone on osseointegration of dental implants.
- 1 April 2016
- Published by American Academy of Implant Dentistry in Journal of Oral Implantology
- Vol. 42 (2) , 119-125
Clinical and Radiographic Evaluation of Immediate Loaded Dental Implants With Local Application of Melatonin: A Preliminary Randomized Controlled Clinical Trial
Immediate loading of dental implants in situations where low bone density exist, such as the posterior maxillary region, became possible recently after the introduction of biomimetic agents. This 1-year preliminary clinical trial was carried out to clinically and radiographically evaluate immediate-loaded 1-piece implants with local application of melatonin in the osteotomy site as a biomimetic material. 14 patients with missing maxillary premolars were randomized to receive 14 implants of 1-piece type that were subjected to immediate loading after 2 weeks of initial placement. Group I included 7 implants with acid-etched surface while group II included 7 implants with acid-etched surface combined with local application of melatonin gel at the osteotomy site. Patients were recalled for follow up at 1, 3, 6, and 12 months after loading. All implants were considered successful after 12 months of follow-up. Significant difference (P < 0.05) was found between both groups at 1 month of implant loading when considering the implant stability. At 1 and 3 months there were significant differences in the marginal bone level between the 2 groups. These results suggest that the local application of melatonin at the osteotomy site is associated with good stability and minimal bone resorption. However, more studies for longer follow-up periods are required to confirm the effect of melatonin hormone on osseointegration of dental implants.
- Open Access
- 1 October 2010
- Published by Springer Nature in The Saudi Dental Journal
- Vol. 22 (4) , 167-170
Immunohistochemical analysis of P53 protein in odontogenic cysts
The p53 is a well-known tumor suppressor gene, the mutations of which are closely related to the decreased differentiation of cells. Findings of studies on immunohistochemical P53 expression in odontogenic cysts are controversial. The present study was carried-out to investigate the immunohistochemical expression of P53 protein in odontogenic cysts. Thirty paraffin blocks of diagnosed odontogenic cysts were processed to determine the immunohistochemical expression of P53 protein. Nine of the 11 odontogenic keratocysts (81.8%) expressed P53, one of three dentigerous cyst cases expressed P53, while none of the 16 radicular cysts expressed P53 protein. The findings of the present work supported the reclassification of OKC as keratocystic odontogenic tumor.
- 1 October 2010
- Published by Springer Nature in The Saudi Dental Journal
- Vol. 22 (4) , 167-170
Open AccessImmunohistochemical analysis of P53 protein in odontogenic cysts
The p53 is a well-known tumor suppressor gene, the mutations of which are closely related to the decreased differentiation of cells. Findings of studies on immunohistochemical P53 expression in odontogenic cysts are controversial. The present study was carried-out to investigate the immunohistochemical expression of P53 protein in odontogenic cysts. Thirty paraffin blocks of diagnosed odontogenic cysts were processed to determine the immunohistochemical expression of P53 protein. Nine of the 11 odontogenic keratocysts (81.8%) expressed P53, one of three dentigerous cyst cases expressed P53, while none of the 16 radicular cysts expressed P53 protein. The findings of the present work supported the reclassification of OKC as keratocystic odontogenic tumor.
- 1 February 2010
- Published by Elsevier in Oral Surgery Oral Medicine Oral Pathology Oral Radiology and Endodontology
- Vol. 109 (2) , e67-e73
Odontogenic tumors in Dakahlia, Egypt: analysis of 82 cases
- 1 February 2010
- Published by Elsevier in Oral Surgery Oral Medicine Oral Pathology Oral Radiology and Endodontology
- Vol. 109 (2) , e67-e73
Odontogenic tumors in Dakahlia, Egypt: analysis of 82 cases