Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Jiao Sun has a total of 50 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Experimental investigation of the dynamics of continuous bubble chains in uniform flow and boundary-layer flow

    by Hao-Yang Li, Jiao Sun, Nan Jiang, Lian-Kuan Zhao, Min Han, Xiao-Long Wang, Jing-Yu Niu

    This study systematically investigated the kinematic response and dynamic mechanisms of vertically rising continuous bubble chains in unconfined countercurrent flow and wall-bounded laminar flow fields through dual-camera orthogonal shadowgraphy. The research focused on the coupled effects of bubbling frequency (fb), equivalent bubble diameter (deq), and dimensionless wall distance (S*) on the evolutionary patterns of the bubble chains. As fb increases, the wake of leading bubbles reduces the drag experienced by trailing bubbles, thereby increasing their rising velocity. In the low fb regime, as fb increases, the dimensionless amplitude increases, while the dimensionless wavelength decreases. However, as fb increases to approximately 8 Hz, the effect of frequency on the bubbles' spatial motion parameters tends to saturate. The deq has both a promoting and an inhibiting effect on bubble velocity and spatial trajectory parameters. Meanwhile, deq significantly affects the aspect ratio of the bubble. As deq increases, the bubble aspect ratio increases, indicating a progressively greater deviation from a spherical shape. S* significantly influences trajectory stability. The near-wall region facilitates the lateral oscillation of bubbles, and the bubble velocity increases slightly. Predictive models for the lift coefficient (CL) and drag coefficient (CD) were established. CL decreases with increasing S* but increases with St, whereas CD decreases with St and slightly increases with S* and Eo. The ratio CL/CD was introduced so that the relative importance of lateral lift effects compared to the axial drag resistance could be qualitatively evaluated. Under near-wall and high-frequency conditions, a larger CL/CD indicates a stronger tendency for lateral trajectory deflection.

  • PIV investigation of wake Vortex Evolution and flow characteristics of a teardrop-shaped slender body in uniform flow

    by Jingyu Niu, Jiao Sun, Nan Jiang, Jinghang Yang, Haoyang Li, Xiaolong Wang, Zhenze Han


  • Open Access

    Experimental Study on Energy Characteristics of a Single Contaminated Bubble near the Wall in Shear Flow

    by Jiawei Zhang, Jiao Sun, Jinliang Tao, Nan Jiang, Haoyang Li, Xiaolong Wang, Jinghang Yang

    This study experimentally investigates the dynamic behavior and energy conversion characteristics of a single contaminated bubble (deq = 2.49–3.54 mm, Reb = 470–830) rising near a vertical wall (S* = 1.41–2.02) in a linear shear flow (the conditions of average flow rate 0.1 m/s and shear rate 0.5 s−1) using a vertical water tunnel and varying sodium dodecyl sulfate (SDS) concentrations (0–50 ppm) and bubble sizes (via needle nozzles). High-speed imaging with orthogonal shadowgraphy captures bubble trajectories, rotation, deformation, and oscillation modes (2, 0) and (2, 2), revealing that an increasing SDS concentration suppresses deformation and the inclination amplitude while enhancing the oscillation frequency, particularly for smaller bubbles. Velocity analysis shows that vertical components remain steady, whereas wall-normal and spanwise fluctuations diminish with surfactant concentration, indicating stabilized trajectories. Additional mass force coefficients are larger for bigger bubbles and decrease with contamination level. Energy analysis demonstrates that surface energy dominates the total energy budget, with vertical kinetic energy comprising over 70% of the total kinetic energy under high SDS concentrations. The results highlight strong scale dependence and Marangoni effects in controlling near-wall bubble motion and energy transfer, providing insights for optimizing gas–liquid two-phase flow processes in chemical and environmental engineering applications.

  • Open Access

    The Impact of Riblet Walls on the Structure of Liquid–Solid Two-Phase Turbulent Flow: Streak Structures and Burst Events

    by Yuchen Zhao, Jiao Sun, Nan Jiang, Jingyu Niu, Jinghang Yang, Haoyang Li, Xiaolong Wang, Pengda Yuan

    This study employs Particle Image Velocimetry (PIV) technology to investigate the statistical properties and flow structures of the turbulent boundary layer over smooth walls and riblet walls with yaw angles of 0, ±30° in both clear water and liquid–solid two-phase flow fields. The results indicate that, compared to the smooth wall, streamwise riblet walls and 30° divergent riblet walls can reduce the boundary layer thickness, wall friction force, comprehensive turbulence intensity, and Reynolds stress, with the divergent riblet wall being more effective. In contrast, convergent riblet walls have the opposite effect. The addition of particles leads to an increase in boundary layer thickness and a reduction in wall friction resistance, primarily by reducing turbulence fluctuations and Reynolds stress in the logarithmic region of the turbulent boundary layer. Moreover, the two types of drag-reduction riblet walls can decrease the energy content ratio of near-wall streak structures and suppress their motion in the spanwise direction. Their impact on burst events is mainly characterized by a reduction in the number of ejection events and their contribution to Reynolds shear stress. In comparison, convergent riblet walls have the complete opposite effect and also enhance the intensity of burst events. The addition of particles can fragment streak structures and suppress the intensity and number of burst events, acting similarly on drag-reduction riblet walls and further strengthening their drag reduction characteristics.

  • Open Access

    Design of High-Efficiency Jet Lift Enhancement for Flaps Under Propeller Slipstream Influence

    by Yan Shao, Wanbo Wang, Jiao Sun, Wenyi Chen, Xinhai Zhao, Jiaxin Pan

    Both propeller slipstream and flap jet flow can significantly increase the aircraft lift coefficient. To establish design principles for efficient lift enhancement via jet flow under the influence of slipstream, wind tunnel experiments are conducted on a wing with propeller slipstream and jet flow. Force measurements using a balance and flow field measurements using hot-wire anemometry are employed to investigate the effects of different jet flow distribution methods on lift enhancement. The results indicate that the coupling of slipstream and jet flow effects can significantly increase wing lift. The stronger the slipstream effect, the more pronounced the lift enhancement under the same momentum coefficient. At the same thrust coefficient, a higher momentum coefficient is required in the slipstream-affected region to suppress airflow separation. Under the same jet flow rate, increasing the momentum coefficient in the slipstream-affected region can significantly improve lift enhancement. At the thrust coefficient of 0.46 and the momentum coefficient of 0.1, the optimized jet flow distribution method achieved a 52.6% greater lift enhancement compared to the spanwise uniform jet flow distribution method.


  • Open Access

    Experimental study on the interaction between particles and coherent structures in dilute liquid–solid two-phase turbulent boundary layer

    by Tian-Da Gao, Jiao Sun, Kang-Fu Sun, Peng-Da Yuan, Lin-Meng Yu, Wen-Yi Chen

    In order to reveal the modulation of particles on turbulent coherent structures and particle concentration variations induced by turbulence, particle image velocimetry experiments were performed in a dilute liquid–solid two-phase turbulent boundary layer. Large-scale coherent structures, including streaks and hairpin vortices, were extracted in the liquid–solid two-phase turbulent boundary layer by using multiple methods, such as proper orthogonal decomposition and finite-time Lyapunov exponent. The results showed that the addition of particles thickened the buffer layer of the average velocity profile, weakened the streamwise turbulence intensity at y+ > 10, strengthened the wall-normal turbulence in the near wall region (y+ < 52), and weakened the Reynolds stress in the logarithmic law region. A more thorough study of the turbulent structure revealed that the particles caused the mean spacing of the near-wall streak structure to increase, hairpin vortex migration to slow down, the uplift of hairpin vortex to be suppressed, and the overall size of the hairpin vortex packet to be compressed. This demonstrated that particles could modulate turbulence by inhibiting the development of hairpin vortices.


  • Control effect on the divergent and convergent riblets in particle-laden turbulent boundary layer

    by Pengda Yuan, Jiao Sun, Tianda Gao, Kangfu Sun, Linmeng Yu, Wenyi Chen, Yuchen Zhao

    Particle image velocimetry was employed to investigate the impact of convergent–divergent riblets on turbulent boundary layers in both clear water and liquid–solid two-phase flow fields containing 155 μm polystyrene particles. The turbulence statistics such as turbulence intensity and Reynolds stress were investigated. The spatial topology of spanwise vortex head and the development and evolution process of hairpin vortices were explored from Euler and Lagrange perspectives, respectively. Additionally, the particle distribution, concentration, and dispersion within the turbulent boundary layer were statistically analyzed. The results indicated that the boundary layer thickness, friction resistance, integrated turbulence intensity, and Reynolds stress were significantly lower on divergent riblet walls compared to convergent riblet walls. Notably, divergent riblets with a yaw angle of 30° exhibited the best drag reduction effect in both single-phase and two-phase flow fields. The addition of particles resulted in an increase in boundary layer thickness but effectively reduced turbulent fluctuations in the logarithmic region, enhancing drag reduction. This extended the drag reduction range of divergent riblets to a yaw angle of 45°, increasing the maximum drag reduction rate to 26.18%. Through spatial multi-scale local average structure function and finite-time Lyapunov exponent field analysis, it was found that the 30° divergent riblet wall significantly inhibited the development of vortex structures and reduced momentum exchange within the boundary layer. Conversely, the 30° convergent riblet wall had the opposite effect, while the particle phase inhibited the development of all wall turbulent structures. Analysis of particle concentration variations within different regions of the turbulent boundary layer revealed that as the normal height of the boundary layer increased, particle concentration gradually increased, and particle dispersion decreased accordingly. The analysis further showed that particle dispersion was mainly influenced by flow structures, whereas concentration was significantly affected by turbulence intensity. These findings elucidate the effect of the flow field on the particle phase and provide insights into the interaction mechanism between the flow field and particles.


  • Experimental investigation on dynamic characteristics of single bubble near wall in shear flow

    by Zi-Yun Su, Jiao Sun, Jia-Wei Zhang, Run-Ze Cai, Kang-Fu Sun, Wen-Yi Chen, Chang-Xin Yu

    The bubble near the wall of shear flow will be subjected to both wall-induced lift and shear-induced lift. The two-lift interaction will markedly change the dynamic behavior of the bubble. In this experiment, the lateral motion of a single bubble (deq=2.33−3.42 mm, Reb=470−680) rising near the vertical wall in a linear shear flow was studied. The positive-synergy and negative-synergy between the wall- and shear-induced lift effects on bubble dynamics were compared. The experiment was carried out in a vertical water tunnel with a curved screen used to generate a stable linear shear flow. Using the shadow method and two charge-coupled device cameras, the movement parameters of the bubble were captured, including the movement trajectory of the bubble, length–diameter ratio, and instantaneous velocity. The lift coefficient CL and drag coefficient CD were obtained by quasi-steady-state analysis and calculation. By fitting the steady lift coefficient, the relation of CL with dimensionless wall distance S* and the Reynolds number Reb was obtained. The results show that there is a critical value of the initial dimensionless distance S* about [S*] = 1.6. When S* > [S*], the bubble is subjected to both wall-induced lift and shear-induced lift. The lift coefficient CL decreases with the increase in S*. When S* < [S*], the bubble receives additional induced lift from the wall. The CL of the smaller bubble was smaller and increases with the increase in S*, while the deformation of the larger bubble will interact with the wall to produce deformation lift away from the wall, presenting larger CL, and decrease with the increase in S*.


  • Open Access

    Experimental Study on the Flow Pattern of Double-hemisphere Rough Elements with Different Streamwise Spacing

    by P. Chen, J. Sun, Y. T. Cheng, W. Y. Chen

    Particle image velocimetry is used to study the variation around single- and double-hemisphere rough elements with different streamwise spacings immersed in the boundary layer. Instantaneous velocity field information in the streamwise–normal and streamwise–spanwise directions is collected at a Reynolds number of 1800. 3R, 5R, and 7R are determined as the rough element spacing used in the double-hemisphere rough element experiment, representing the smaller, medium transition, and larger rough element spacing, respectively. The average velocity, Reynolds shear stress, shedding frequency, and proper orthogonal decomposition results of the flow field around the rough elements under various working conditions were compared. The downstream hemisphere will encroach on the streamline following the upstream hemisphere, and changing the spacing means changing the position of the encroached area. When the spacing is smaller, the streamline reattachment is destroyed, and the momentum and mass exchange between the two-hemisphere rough elements decreases. The double-hemisphere rough element is a slender, blunt, rough element. At the medium transition spacing, the shear layer and vortex structure shed from the upstream hemisphere are over the downstream hemisphere, and the double-hemisphere rough elements will cause disturbance in a larger wall-normal range. The streamline has been reattached at the larger streamwise spacing, and the interaction between the two hemispheres is the weakest. Here, the double-hemisphere rough element will form the recirculation zone, recirculation arch vortex, and periodic hairpin vortex.