Jan Krystek
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Jan Krystek has a total of 24 co-authors. Here are the top co-authors by number of shared publications:
- Radek Kottner
University of West Bohemia
5 shared publications Tomáš Kroupa
Univ West Bohemia, Fac Appl Sci, NTIS New Technol Informat Soc, Tech 8, Plzen 30100, Czech Republic
4 shared publications- Frantisek Sedlacek
Faculty of Mechanical Engineering, University of West Bohemia in Pilsen, Univerzitni 8, 301 00 Plzen, Czech Republic
2 shared publications - Jan Heczko
NTIS - New Technologies for the Information Society, Faculty of Applied Sciences, University of West Bohemia, Technická 8, Pilsen, Czech Republic
2 shared publications Lukáš Bek
University of West Bohemia
2 shared publications- Lukáš Horák2 shared publications
Latest Publications
- Open Access
Towards Sustainable Composite Structures: Experimental Characterisation and Damage Modelling of Unidirectional Flax Fibre-Reinforced Polymers
The increasing demand for sustainable engineering solutions has driven extensive research into natural fibre-reinforced composites (NFCs), notably flax fibre-reinforced polymers (FFRPs), which offer promising eco-friendly alternatives to synthetic composites. This study presents a comprehensive application of continuum damage mechanics (CDM) methodology to unidirectional (UD) FFRPs, addressing critical gaps in predictive modelling of progressive intralaminar damage for sustainable structural applications. A systematic experimental characterisation protocol was developed to identify material parameters that account for the inherent variability and complex nonlinear behaviour of natural fibres. The CDM model was calibrated using comprehensive quasi-static testing on multiple laminate configurations and validated through finite element analysis (FEA) in Siemens Simcenter Samcef. The model accurately captures the nonlinear behaviour and damage mechanisms of notched flax–epoxy laminates, achieving prediction accuracies of 97.61% and 88.98% for the force-displacement response in open-hole tensile (OHT) validation tests. Integrating experimental characterisation with FEA enables robust virtual prototyping of sustainable composite structures, supporting design optimisation and lifecycle assessment. This research establishes validated damage modelling methodologies for eco-friendly NFC, facilitating accelerated adoption in automotive, marine, and construction sectors.
Open AccessTowards Sustainable Composite Structures: Experimental Characterisation and Damage Modelling of Unidirectional Flax Fibre-Reinforced Polymers
The increasing demand for sustainable engineering solutions has driven extensive research into natural fibre-reinforced composites (NFCs), notably flax fibre-reinforced polymers (FFRPs), which offer promising eco-friendly alternatives to synthetic composites. This study presents a comprehensive application of continuum damage mechanics (CDM) methodology to unidirectional (UD) FFRPs, addressing critical gaps in predictive modelling of progressive intralaminar damage for sustainable structural applications. A systematic experimental characterisation protocol was developed to identify material parameters that account for the inherent variability and complex nonlinear behaviour of natural fibres. The CDM model was calibrated using comprehensive quasi-static testing on multiple laminate configurations and validated through finite element analysis (FEA) in Siemens Simcenter Samcef. The model accurately captures the nonlinear behaviour and damage mechanisms of notched flax–epoxy laminates, achieving prediction accuracies of 97.61% and 88.98% for the force-displacement response in open-hole tensile (OHT) validation tests. Integrating experimental characterisation with FEA enables robust virtual prototyping of sustainable composite structures, supporting design optimisation and lifecycle assessment. This research establishes validated damage modelling methodologies for eco-friendly NFC, facilitating accelerated adoption in automotive, marine, and construction sectors.
- 1 January 2025
- Published by University Library in Kragujevac
- p. 51-52
INFLUENCE OF TEMPERATURE ON MODE I FRACTURE TOUGHNESS OF A DUCTILE ADHESIVE
The main goal of this study is to quantify the effect of temperature on Mode I fracture toughness for a ductile adhesive. Later, this set of material parameters was used to simulate a Double Cantilever Beam (DCB) sample with various shapes of Traction-separation models to better capture the gradual failure of the adhesive under different thermal operating conditions.
- 1 January 2025
- Published by University Library in Kragujevac
- p. 51-52
INFLUENCE OF TEMPERATURE ON MODE I FRACTURE TOUGHNESS OF A DUCTILE ADHESIVE
The main goal of this study is to quantify the effect of temperature on Mode I fracture toughness for a ductile adhesive. Later, this set of material parameters was used to simulate a Double Cantilever Beam (DCB) sample with various shapes of Traction-separation models to better capture the gradual failure of the adhesive under different thermal operating conditions.
- 1 January 2019
- Published by Elsevier in Materials Today: Proceedings
- Vol. 12, 404-410
Validation of identified material parameters of rubber using an Arcan shear test
- 1 January 2019
- Published by Elsevier in Materials Today: Proceedings
- Vol. 12, 404-410
Validation of identified material parameters of rubber using an Arcan shear test
- Open Access
- 14 March 2018
- Published by EDP Sciences in MATEC Web of Conferences
- Vol. 157, 05014
Tensile and bending test of carbon/epoxy and carbon/geopolymer composites after temperature conditioning
Composites with epoxy matrix cannot be used in high temperature, while geopolymer matrix excel in high temperature resistance. First, prismatic specimens were subjected to conditioning temperature. Second, the tensile and bending test were performed at room temperature. This paper present comparison of mechanical properties of carbon/epoxy and carbon/geopolymer composites. Numerical simulations of tensile and bendidng tests were performed in finite element system Abaqus.
- 14 March 2018
- Published by EDP Sciences in MATEC Web of Conferences
- Vol. 157, 05014
Open AccessTensile and bending test of carbon/epoxy and carbon/geopolymer composites after temperature conditioning
Composites with epoxy matrix cannot be used in high temperature, while geopolymer matrix excel in high temperature resistance. First, prismatic specimens were subjected to conditioning temperature. Second, the tensile and bending test were performed at room temperature. This paper present comparison of mechanical properties of carbon/epoxy and carbon/geopolymer composites. Numerical simulations of tensile and bendidng tests were performed in finite element system Abaqus.
- Open Access
- 14 March 2018
- Published by EDP Sciences in MATEC Web of Conferences
- Vol. 157, 05012
Determination of the influence of adherent surface on the adhesive bond strength
A type of surface and a surface treatment of the adherends has a great influence on strength and durability of bonded joints. This paper deals with an experimental testing of influence of adherent surface on bonded joints strength. Several combinations of materials, surface treatments and two types of adhesives has been designed and manufactured. Those properties were tested on the lap-joints. Samples were made according to the standard ASTM D5868. The materials used were steel S355, aluminium alloy EN AW 7075 T6, carbon fibre laminate and glass fibre laminate. The surface treatments used were: Sandblasted, Mechanically roughened, Anodised, Cataphoretically painted and No-surface treatment. The experimental tests of test specimens were done on the Zwick/Roell Z050 machine. Suitable combinations of material, adhesives and surface treatments were selected based on testing.
- 14 March 2018
- Published by EDP Sciences in MATEC Web of Conferences
- Vol. 157, 05012
Open AccessDetermination of the influence of adherent surface on the adhesive bond strength
A type of surface and a surface treatment of the adherends has a great influence on strength and durability of bonded joints. This paper deals with an experimental testing of influence of adherent surface on bonded joints strength. Several combinations of materials, surface treatments and two types of adhesives has been designed and manufactured. Those properties were tested on the lap-joints. Samples were made according to the standard ASTM D5868. The materials used were steel S355, aluminium alloy EN AW 7075 T6, carbon fibre laminate and glass fibre laminate. The surface treatments used were: Sandblasted, Mechanically roughened, Anodised, Cataphoretically painted and No-surface treatment. The experimental tests of test specimens were done on the Zwick/Roell Z050 machine. Suitable combinations of material, adhesives and surface treatments were selected based on testing.
- Open Access
- 12 August 2016
- Published by Institute of Metals and Technology in Materiali in tehnologije
- Vol. 50 (4) , 579-583
Investigation of the mechanical properties of a cork/rubber composite
- 12 August 2016
- Published by Institute of Metals and Technology in Materiali in tehnologije
- Vol. 50 (4) , 579-583
Open AccessInvestigation of the mechanical properties of a cork/rubber composite
- Open Access
- 17 June 2016
- Published by Institute of Metals and Technology in Materiali in tehnologije
- Vol. 50 (3) , 295-299
Tensile and compressive tests of textile composites and results analysis
- 17 June 2016
- Published by Institute of Metals and Technology in Materiali in tehnologije
- Vol. 50 (3) , 295-299
Open AccessTensile and compressive tests of textile composites and results analysis
- 18 November 2015
- Published by Institute of Metals and Technology in Materiali in tehnologije
- Vol. 49 (6) , 957-960
Load-capacity prediction for the carbon-or glass-fibre-reinforced plastic part of a wrapped pin joint
- 18 November 2015
- Published by Institute of Metals and Technology in Materiali in tehnologije
- Vol. 49 (6) , 957-960
Load-capacity prediction for the carbon-or glass-fibre-reinforced plastic part of a wrapped pin joint