Current Organizations / Institutes

The organizations/institutes from the scholar's latest article

Previous Organizations / Institutes

The organizations / institutes from the scholar's other articles in the past ten years


Virgil Mihai Rădulescu has a total of 46 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Structural Health Monitoring of Tall Slender Structures Under Environmental Factors: A Review of Geomatics and Multi-Technology Approaches with Bibliometric Analysis

    by Adrian Traian Rădulescu, Virgil Mihai Rădulescu, Gheorghe M. T. Rădulescu, Corina M. Rădulescu

    Very tall slender structures are constructions that, due to their exceptional structural characteristics, are most exposed to environmental factors, especially wind and uneven sunlight. We refer specifically to smoke chimneys over 200 m and tall television towers, which, due to their truncated conical structure, exhibit behavior different from residential-type structures. Environmental stresses manifest as forces that can induce reversible tilts and oscillations—when their value significantly exceeds design values, they can cause damage or even destruction of the construction. Monitoring the preservation of structural integrity under the influence of environmental factors—a fundamental component of Structural Health Monitoring (SHM)—is essential for safety and maintenance. In the SHM of very tall slender structures, many studies employ various theories, methodologies, and technologies that have advanced rapidly due to the expansion of information technology. The objective of this study is to identify areas lacking research in the existing literature regarding environmental factors influencing the reversible displacement of very tall slender structures, along with the analysis of techniques and technologies used for monitoring these structures. To achieve this objective, the most critical environmental factors and technologies, especially sensor-based ones, were identified through a systematic search of the most popular databases. Subsequently, the study employs a bibliometric analysis, exploring challenges and prospective research areas reflected in the specialized literature. An extensive analysis of the State-of-the-Art on the subject in the specialized literature—particularly that published by the most prestigious journals in the field—was conducted. The findings indicate a lack of scientific investigations on environmental factors influencing SHM of very tall slender structures, especially studies on the effect of uneven sunlight on structures. The research provides a comprehensive understanding of SHM of very tall slender structures and has practical implications for developing effective monitoring methodologies.

  • INTEGRATED MONITORING OF CARPATHIAN WETLANDS USING MULTI-SOURCE DATA AND GIS-BASED ANALYSIS

    by Dorel Gusat, Adrian Traian Rădulescu, Virgil Mihai G.M. Rădulescu, Norbert Kiss

    Wetlands provide essential ecosystem services, including water regulation, biodiversity support, and climate change mitigation, yet they are increasingly threatened by hydrological alterations, climate variability, and insufficient monitoring systems. This study aims to develop and implement an integrated monitoring framework for wetlands of international importance in the Carpathian region within the WeVaRe project. The approach is based on the integration of multi-source data, including hydrological measurements (water levels, flow, and water quality), meteorological and climatological parameters (temperature, precipitation, evapotranspiration), and remote sensing products derived from Sentinel-1 and Sentinel-2 satellite imagery, digital elevation models, and spectral indices such as NDVI and NDWI. All datasets were subjected to rigorous quality control procedures, including homogeneity testing, outlier detection, and gap-filling methods, and were subsequently integrated into a GIS-based database enabling advanced spatio-temporal analysis and modeling. The results highlight significant seasonal variability in water levels, soil moisture, and vegetation dynamics in the studied wetlands (Tăul lui Ciumau and Iezeru Mare), with clear correlations between climatic conditions and ecosystem responses. Furthermore, multi-criteria GIS models in ArcGIS Pro allowed the identification of areas exposed to risks such as flooding, drought, and land degradation, improving the spatial accuracy of environmental assessments. The integrated monitoring system enhances the understanding of wetland dynamics and supports the development of predictive scenarios under changing climate conditions. These findings provide a robust scientific basis for adaptive wetland management, facilitating data-driven decision-making, conservation planning, and cross-border environmental cooperation. The proposed framework demonstrates the added value of combining remote sensing, in-situ observations, and GIS technologies for sustainable wetland monitoring and management.

  • INCREASING THE ENVIRONMENTAL MONITORING CAPACITY OF AREAS OF FORMER MINING EXPLOITATIONS IN NORTHWESTERN ROMANIA BY DESIGNING AN INTEGRATED MONITORING MODEL IMPLEMENTED ON A GIS PLATFORM

    by Virgil Mihai G.M. Rădulescu

    The closure of mines in northwestern Romania has brought a series of problems regarding the long-term effects of mining on the environment, problems that remain unresolved. The main environmental effects of mining have been reflected on the lands above or near former underground mining sites. This paper analyzes the opportunity and possibility of increasing environmental monitoring capacity in former mining areas in Northwestern Romania, by designing an integrated monitoring model implemented on a GIS software platform. The general objective of the paper is to propose an integrated model for increasing environmental monitoring capacity in former mining areas in northwestern Romania by reducing degradation and disaster risk, improving the environment through an active integrated monitoring system. A central element of the project is the integration of all data into a dynamic GIS database, structured into thematic layers and supported by specialized software platforms (e.g., ArcView/ESRI) and permanent updating, constituting an active GIS platform. The software component includes the creation of a mining database, establishing the structure and management system, implementing monitoring software on the GIS platform, loading data, and forming the GIS Mining Data Bank. The system allows continuous data updating, identification of critical areas, placement of monitoring stations, and real-time risk assessment. Furthermore, the project includes the development of an online platform for interdisciplinary collaboration and dissemination of results. The paper raises an alarm regarding the lack of concern in determining the danger posed by former underground mines in Maramureș County, concerning surface movements and pollution. The subsidence effects produced on the surface by the frequent underground voids in the area (Figure 1) of the Săsar-Valea Borcutului Mining Field were chosen as a case study. By implementing this technical-managerial model, the project contributes to substantiating decisions regarding the sustainable management of affected mining areas and increasing their resilience to natural and anthropogenic hazards.

  • ASSESSMENT OF THE HYDROLOGICAL IMPACT ON SLOPE STABILITY: A MULTI-SENSORY ANALYSIS BY GEODESIC, TOPOGRAPHIC, PHOTOGRAMMETRIC, LIDAR METHODS OF A LANDSLIDE

    by Raluca Claudia Gâlgău, Sanda Mărioara Naș, Ioel Samuel Vereș, Virgil Mihai Rădulescu, Adrian Traian Rădulescu, Mihai Dorin Isac

    Landslides are complex geodynamic processes triggered by the breakdown of the balance between active gravitational forces and the shear strength of the earth massif. This instability is often the result of the interaction between intrinsic geological factors and external triggers (precipitation, thermal variations, anthropogenic activities). The causal factors of landslides vary in their action over time and it should be emphasized that the influence of different factors (agents) on the equilibrium state of the slopes is exerted in a combined and not isolated way. Most of the natural mechanical factors that lead to landslides are directly dependent on the presence of surface water and groundwater. The surface waters exert a permanent erosion action of the banks and the base of the slopes. The phenomenon leads to a decrease in the resistance forces, which determines the reduction of the slope's stability until the equilibrium phase, the limit at which the landslide occurs. The action of groundwater on the land is manifested by the water pressure in the pores, the filtration pressure and the suffocation process, to which are added the change in time of the physical-mechanical properties, the reduction of the mineralization of the water in the pores and the negative effect of the rise of the groundwater level. The study demonstrates that the multi-sensor and multi-temporal approach through topographic, photogrammetric and LiDAR methods is a robust solution for monitoring landslides, offering a high level of accuracy, detail and repeatability. In the case of the landslide in the premises of CMID Dobrin, Sălaj County, the analysis highlighted an active instability of moderate intensity, controllable by appropriate technical measures and by maintaining a systematic geospatial monitoring program. The methodological approach, which combined high-precision point measurements (total station, static GNSS systems) with extended coverage measurements (UAV photogrammetry and LiDAR), proved to be highly effective. Digital elevation (DEM), surface (DSM) and terrain (DTM) models derived from LiDAR data allowed for the identification and detailed mapping of the microrelief specific to instabilities, including tensile cracks, slip steps, microdepressions and areas of displaced material accumulation. This information is crucial for the precise delimitation of risk areas and for the design of interventions. The study reconfirmed the fundamental role of hydrological factors in accelerating instability processes. Water infiltration, facilitated by the extensive crack system and the degradation of the collection ditches, lead to an increase in pore pressures and a reduction in the shear strength of clay materials. This complex interaction between natural (geology, geomorphology, hydrology) and anthropogenic (slope changes, infrastructure) factors underlines the need for a holistic approach to risk management.

  • HYDROGEOLOGICAL ASSESSMENT OF WATER INFILTRATIONS AND THEIR IMPACT ON THE GEOMECHANICAL STABILITY OF ROCK SALT EXCAVATIONS AT THE TÂRGU OCNA SALT MINE, TROTUȘ MINE, ROMANIA

    by Sanda Mărioara Naș, Raluca Claudia Gâlgău, Ioel Samuel Vereș, Virgil Mihai Rădulescu, Adrian Traian Rădulescu, George Acatrinei

    The exploitation of the gem salt from the Targu Ocna Salt Mine, Trotuș Mine, Romania, due to the mining voids created, the initial stability of the massif was destroyed, the hydrogeological conditions of the deposit were gradually modified. The sterile intercalations, especially clayey, which acted as a protective shield against water infiltration, being cracked or broken, opened the possibility of water infiltration through the stratification planes, faults, fissures and cracks. The water coming from the condensation on the ceiling, walls and hearth of the mining works produced superficial dissolution phenomena. After drying, the solidified salt remained on the surfaces of the ceiling, walls or hearth of the excavated spaces. The most illustrative area in this regard is the entrance from the car plan to the V horizon of the Trotus Mine, where the hearth and the ceiling of the rooms are covered with recrystallized salt. On 17.10.2024, when a visit was made underground, before the entrance gate and then approx. 100 meters, at the hearth of the room there were numerous puddles, with a depth of 5-10 cm. The presence of water in the salt massif generated dissolution phenomena, which affected the bearing capacity of the resistance elements, pillars and floors, in two ways, namely the reduction of the values of the mechanical resistances over time and the reduction of the dimensions of the resistance elements, due to the dissolutions. The limitation of the phenomena of infiltration of water into the groundwater can be achieved, in the first instance, by carrying out, on the surface, some water capture and drainage works, apart from the cones of collapse of the old basins. In this regard, guard channels, gutters, ditches, or regularization works of the riverbeds of the Trifu and Grebleş streams that cross the exploitation perimeter can be built. In order to monitor the stability of the land surface in the salt mining perimeter, in addition to the topographic landmarks, located on the area adjacent to the perimeter, continuous monitoring of the morphology of the land was introduced, through aerial photogrammetry from drones. This method allows the construction of continuous, high-precision three-dimensional digital models of the land surface of the entire mining perimeter.

  • Open Access

    Enhancing Data Collection Time Intervals and Modeling the Structural Behavior of Bridges in Response to Temperature Variations

    by Adrian Traian Rădulescu, Gheorghe M. T. Rădulescu, Sanda Mărioara Naș, Virgil Mihai Rădulescu, Corina M. Rădulescu

    The impact of temperature on bridges represents one of the main long-term challenges of structural health monitoring (SHM). Temperature is an environmental variable that changes both throughout the day and between different seasons, and its variations can induce thermal loads on bridges, potentially resulting in considerable displacements and deformations. Therefore, it is essential to obtain current data on the impact of daily and seasonal temperature variations on bridge displacements. Unfortunately, the maintenance costs associated with using precise estimates of thermal loads in a bridge design are quite high. The introduction of more accessible structural monitoring services is imperative to increase the number of observed structures. Viable solutions to make SHM more efficient include minimizing the costs of equipment, sensors, data loggers, data transmission systems, or monitoring data processing software. This research aims to improve the time intervals for collecting data on external temperature variations measured on a bridge structure through a sensor-based detection system and the integration of results into a regression analysis model. The paper aims to determine the appropriate interval for capturing and transmitting the structural response influenced by temperature variations over a year and to develop a behavioral mathematical model for the concrete structural components of a monitored bridge. The structural behavior was modeled using the statistical software TableCurve 2D, v.5.01. The results indicate that extending the data collection periods from 15 min to 4 h, in a static regime, maintains the accuracy of the regression model; instead, the effects of this integration are a significant reduction in the costs of data collection, transmission, and processing. The practical implications of this study consist of improving the monitoring of the structural behavior of bridges and the prediction under thermal stress, aiding in the design of more resilient structures, and enabling the implementation of efficient maintenance strategies.


  • MANAGEMENT CONSIDERATIONS FOR THE INTEGRATION OF BIM, GIS, SHM AND LEAN MANUFACTURING IN CONSTRUCTION MODULATION

    by Diana Minodora Pop, Corina Michaela Rădulescu, Virgil Mihai Rădulescu, Adrian Traian Rădulescu, Gelu Danku

    In a recent statistic published by the World Green Building Council (WorldGBC) it is estimated that in the next 75 years around 2 billion homes should be built in the world to satisfy the need, which would mean around 75,000 per day being made available. The modular realization of the constructions would facilitate this approach, as it would decrease the unit price on the one hand, but also the execution time on the other hand. An important contribution in this endeavor would be the organization of the activity including in the logistic scheme the entire process from the feasibility study to the post-execution structural monitoring of the new technologies, part IT, part instrumental and organizational, such as BIM (Building Information Modeling), GIS (Geographic Information System), SHM (Structural Health Monitoring) and Lean Manufacturing, in a combination that would generate organizational and technological models adaptable to each case. This paper deals with this topic by trying to propose a cumulative approach, since each of the mentioned technologies can play a role, it being important to determine where, when and how much and how the benefits given by each of them can be complemented.

  • Open Access

    Structural Health Monitoring of Bridges under the Influence of Natural Environmental Factors and Geomatic Technologies: A Literature Review and Bibliometric Analysis

    by Virgil Mihai Rădulescu, Gheorghe M. T. Rădulescu, Sanda Mărioara Naș, Adrian Traian Rădulescu, Corina M. Rădulescu

    Throughout their lifetimes, bridges are exposed to various forces that may lead to displacement and deformation, potentially compromising their structural integrity. Monitoring their structural integrity under environmental factors is essential for safety and maintenance under these conditions. This aspect is a fundamental component of Structural Health Monitoring (SHM). Many studies focus on Structural Health Monitoring (SHM), employing various theories, methodologies, and technologies that have advanced rapidly due to the expansion of information technology. The objective of this study is to pinpoint areas where research is lacking in the existing literature on the environmental factors that impact the displacement of bridges, along with the techniques and technology used to monitor these structures. To achieve this objective, the most critical environmental factors and technologies, particularly those that are sensor-based, have been identified through a systematic search of the most popular databases. Subsequently, the study utilized a bibliometric analysis, exploring the challenge and prospective research areas reflected in the specialized literature. The findings indicate a lack of scholarly investigation of environmental factors that influence the Structural Health Monitoring (SHM) of bridges, in particular studies regarding the effect of uneven sunlight on structures. The research provides a comprehensive understanding of the Structural Health Monitoring (SHM) of bridges and has practical implications for developing effective monitoring methodologies.


  • Open Access

    Geospatial technologies for landslide monitoring: a case study of Sighetu Marmației, Romania

    by Tiberiu Mihai Kalmar, Marcel Dîrja, Adrian Traian G. M. Rădulescu, Petru Daniel Măran, Gheorghe M. T. Rădulescu, Mariya Nychvyd, Ivan Kalynych, Virgil Mihai G. M. Rădulescu, Gelu Zaharia, Gelu Danku


  • Open Access

    The Use of UAVs to Obtain Necessary Information for Flooding Studies: The Case Study of Somes River, Floresti, Romania

    by Raluca Gâlgău, Sanda Marioara Naș, Virgil Mihai Radulescu, Ioel Samuel Vereș, Mircea Vasile Bondrea

    Floods are natural disasters that cause damage, loss of life, and economic problems throughout the world. Part of these losses can be minimized with the help of different methodologies and tools used to prepare simulations, analyses, and data monitoring to predict such phenomena in time. The metropolitan area of Cluj-Napoca, Romania, is the study area of this paper and it is located in Floresti, the largest rural settlement in Romania. In this area, changes in urbanization, land use, and the expansion of urban areas in a chaotic mode represent a problem. This study focuses on an area prone to flooding due to its proximity to the Somes River. Previous events of this type have caused economic losses that must be considered. This approach combines photogrammetric methods for obtaining data from the field with topographical methods for establishing control points and GIS methods for data processing, modeling, and simulation to obtain the necessary data for flood prevention and intervention.