Verónica López Durán
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Verónica López Durán has a total of 19 co-authors. Here are the top co-authors by number of shared publications:
- Lars Wågberg
Fibre and Polymer Technology, KTH Royal Institute of Technology, Stockholm, Sweden
4 shared publications Lars Wågberg
Fibre and Polymer Technology, KTH Royal Institute of Technology, SE-10044 Stockholm, Sweden; BiMaC Innovation, KTH Royal Institute of Technology, SE-10044 Stockholm
3 shared publicationsPer A. Larsson
Fibre and Polymer Technology, KTH Royal Institute of Technology, Teknikringen 56−58, SE-10044 Stockholm, Sweden
3 shared publications- Per A. Larsson
Department of Fiber and Polymer Technology, KTH Royal Institute of Technology, Stockholm, Sweden
3 shared publications - Johan Erlandsson
Department of Fibre and Polymer Technology, KTH - Royal Institute of Technology, Teknikringen 56, SE-100 44 Stockholm, Sweden
2 shared publications A. Salleo
Department of Materials Science and Engineering, Geballe Laboratory for Advanced Materials, Stanford University, Stanford, CA 94305, USA
1 shared publication
Latest Publications
- 1 April 2020
- Published by Elsevier in Carbohydrate Polymers
- Vol. 233, 115829
Ion conductivity through TEMPO-mediated oxidated and periodate oxidated cellulose membranes
- 1 April 2020
- Published by Elsevier in Carbohydrate Polymers
- Vol. 233, 115829
Ion conductivity through TEMPO-mediated oxidated and periodate oxidated cellulose membranes
- 1 February 2020
- Published by Elsevier in Carbohydrate Polymers
- Vol. 230, 115616
Layer-by-layer modified low density cellulose fiber networks: A sustainable and fireproof alternative to petroleum based foams
- 1 February 2020
- Published by Elsevier in Carbohydrate Polymers
- Vol. 230, 115616
Layer-by-layer modified low density cellulose fiber networks: A sustainable and fireproof alternative to petroleum based foams
- Open Access
- 3 July 2018
- Published by Royal Society of Chemistry (RSC) in Analytical Methods
- Vol. 10 (31) , 3820-3823
Measuring elasticity of wet cellulose fibres with AFM using indentation and a linearized Hertz model
The mechanical properties of different pulp fibres in liquid were measured using an atomic force microscope.
- 3 July 2018
- Published by Royal Society of Chemistry (RSC) in Analytical Methods
- Vol. 10 (31) , 3820-3823
Open AccessMeasuring elasticity of wet cellulose fibres with AFM using indentation and a linearized Hertz model
The mechanical properties of different pulp fibres in liquid were measured using an atomic force microscope.
- 21 June 2018
- Published by American Chemical Society (ACS) in ACS Sustainable Chemistry & Engineering
- Vol. 6 (8) , 9951-9957
Novel, Cellulose-Based, Lightweight, Wet-Resilient Materials with Tunable Porosity, Density, and Strength
- 21 June 2018
- Published by American Chemical Society (ACS) in ACS Sustainable Chemistry & Engineering
- Vol. 6 (8) , 9951-9957
Novel, Cellulose-Based, Lightweight, Wet-Resilient Materials with Tunable Porosity, Density, and Strength
- 27 March 2018
- Published by American Chemical Society (ACS) in ACS Applied Nano Materials
- Vol. 1 (4) , 1959-1967
Effect of Chemical Functionality on the Mechanical and Barrier Performance of Nanocellulose Films
In the present work, we have partially modified fibrils chemically to create a shell of derivatized cellulose that surrounds the crystalline core of native cellulose. Through the different modifications, we aimed at creating a toolbox to enable the properties of CNF materials and materials containing CNFs to be tuned to meet specific material demands. In total, nine different chemical modifications using different aqueous-based procedures were used as chemical pretreatments before CNF production through homogenization. Eight of these modifications included periodate oxidation with an average of 27% of the anhydroglucose units in the cellulose chain being cleaved into dialdehydes. The presence of aldehydes then facilitated a conversion to other functional groups. TEMPO oxidation was also performed, alone or combined with either periodate oxidation or periodate oxidation followed by borohydride reduction or chlorite oxidation. The nine different CNFs produced after chemical modifications were characterized by size, charge density, and colloidal stability. Free-standing films were subsequently fabricated form the fibrils and characterized by mechanical, moisture adsorption, and barrier properties, as well as by their degradation upon heating. The properties of the CNFs achieved through the different modification methods varied depending on the functional group present in the modified CNF shell. After periodate oxidation, no colloidal stability was observed. Interestingly, the periodate-oxidized fibers could be fairly easily homogenized at a concentration of 4 wt %, in contrast to 2 wt % for the other fibers. When charges were introduced onto the periodate-oxidized fibers, CNFs with a higher colloidal stability were produced, but to facilitate CNF production, the mass concentration during this step had to be decreased. After the sequential modification by periodate oxidation and borohydride reduction, a great increase in ductility in the films was observed, but interestingly, when more charges were introduced, this increase in ductility was lost, and the mechanical strength increased. CNFs without further modification after the periodate oxidation resulted in cross-linked films with low moisture sorption and a low oxygen permeability: 0.2–0.7 mL·μm/(m2·24h ·kPa) at 50% RH and 0.3–14 mL·μm/(m2·24h·kPa) at 80% RH depending on the modification performed.
- 27 March 2018
- Published by American Chemical Society (ACS) in ACS Applied Nano Materials
- Vol. 1 (4) , 1959-1967
Effect of Chemical Functionality on the Mechanical and Barrier Performance of Nanocellulose Films
In the present work, we have partially modified fibrils chemically to create a shell of derivatized cellulose that surrounds the crystalline core of native cellulose. Through the different modifications, we aimed at creating a toolbox to enable the properties of CNF materials and materials containing CNFs to be tuned to meet specific material demands. In total, nine different chemical modifications using different aqueous-based procedures were used as chemical pretreatments before CNF production through homogenization. Eight of these modifications included periodate oxidation with an average of 27% of the anhydroglucose units in the cellulose chain being cleaved into dialdehydes. The presence of aldehydes then facilitated a conversion to other functional groups. TEMPO oxidation was also performed, alone or combined with either periodate oxidation or periodate oxidation followed by borohydride reduction or chlorite oxidation. The nine different CNFs produced after chemical modifications were characterized by size, charge density, and colloidal stability. Free-standing films were subsequently fabricated form the fibrils and characterized by mechanical, moisture adsorption, and barrier properties, as well as by their degradation upon heating. The properties of the CNFs achieved through the different modification methods varied depending on the functional group present in the modified CNF shell. After periodate oxidation, no colloidal stability was observed. Interestingly, the periodate-oxidized fibers could be fairly easily homogenized at a concentration of 4 wt %, in contrast to 2 wt % for the other fibers. When charges were introduced onto the periodate-oxidized fibers, CNFs with a higher colloidal stability were produced, but to facilitate CNF production, the mass concentration during this step had to be decreased. After the sequential modification by periodate oxidation and borohydride reduction, a great increase in ductility in the films was observed, but interestingly, when more charges were introduced, this increase in ductility was lost, and the mechanical strength increased. CNFs without further modification after the periodate oxidation resulted in cross-linked films with low moisture sorption and a low oxygen permeability: 0.2–0.7 mL·μm/(m2·24h ·kPa) at 50% RH and 0.3–14 mL·μm/(m2·24h·kPa) at 80% RH depending on the modification performed.
- Open Access
- 29 June 2017
- Published by Springer Nature in Cellulose
- Vol. 24 (9) , 3883-3899
Chemically modified cellulose micro- and nanofibrils as paper-strength additives
- 29 June 2017
- Published by Springer Nature in Cellulose
- Vol. 24 (9) , 3883-3899
Open AccessChemically modified cellulose micro- and nanofibrils as paper-strength additives
- 1 December 2016
- Published by Elsevier in Applied Materials Today
- Vol. 5, 246-254
Macro- and mesoporous nanocellulose beads for use in energy storage devices
- 1 December 2016
- Published by Elsevier in Applied Materials Today
- Vol. 5, 246-254
Macro- and mesoporous nanocellulose beads for use in energy storage devices
- Open Access
- 2 September 2016
- Published by Springer Nature in Cellulose
- Vol. 23 (6) , 3495-3510
On the relationship between fibre composition and material properties following periodate oxidation and borohydride reduction of lignocellulosic fibres
- 2 September 2016
- Published by Springer Nature in Cellulose
- Vol. 23 (6) , 3495-3510
Open AccessOn the relationship between fibre composition and material properties following periodate oxidation and borohydride reduction of lignocellulosic fibres