Bingchang Zhang
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Bingchang Zhang has a total of 112 co-authors. Here are the top co-authors by number of shared publications:
- Xiaohong Zhang
Institute of Functional Nano & Soft Materials (FUNSOM), Jiangsu Key Laboratory of Advanced Negative Carbon Technologies, Soochow University, Suzhou, China
27 shared publications Jia Yu
Institute of Functional Nano & Soft Materials (FUNSOM) Soochow University Suzhou P. R. China
13 shared publicationsJiahao Qin
Institute of Functional Nano & Soft Materials (FUNSOM), Jiangsu Key Laboratory for Carbon-Based Functional Materials and Devices, Soochow University, Suzhou, Jiangsu 215123, P. R. China
9 shared publicationsYihao Shi
Institute of Functional Nano & Soft Materials (FUNSOM) Soochow University Suzhou P. R. China
9 shared publications- Jiansheng Jie
State Key Laboratory of Bioinspired Interfacial Materials Science Institute of Functional Nano & Soft Materials (FUNSOM) Soochow University Suzhou Jiangsu P. R. China
7 shared publications - Le He
Institute of Functional Nano & Soft Materials (FUNSOM) and Jiangsu Key Laboratory of Advanced Negative Carbon Technologies Soochow University Suzhou P. R. China
7 shared publications
Latest Publications
- 24 January 2026
- Published by Wiley in Advanced Functional Materials
- Vol. 36 (35)
Deformation‐Modulated Hydrovoltaic Effect for Continuous Self‐Powered Strain Sensing
Strain sensors capable of continuous, self‐powered operation are critical for biomedical and environmental monitoring systems, yet remain challenging to realize. Here, we report a hydrovoltaic self‐powered strain sensor (HVSP) based on flexible silicon nanowire arrays. The sensor exploits deformation‐induced modulation of hydrovoltaic electrical output, enabling persistent monitoring of both dynamic and quasi‐static strains without external power sources, which effectively overcomes the transient‐signal limitation of existing self‐powered strain sensors. The HVSP sensor exhibits a high gauge factor of −135, comparable to commercial silicon strain gauges, alongside excellent cyclic stability and durability. Integration with contact lenses demonstrates sensitive intraocular pressure monitoring across physiological ranges (7.5–30 mmHg) with a responsivity of −4.4 mV/mmHg and detection resolution of 0.74 mmHg, performance that surpasses clinical tonometry standards. Biocompatibility tests confirm cytocompatibility and conformal ocular surface integration, while powering an LED in simulated tear reveals the potential of the HVSP sensor for seamless integration into functional systems and straightforward visual feedback. This work introduces a novel hydrovoltaic sensing mechanism that not only enables high‐performance physiological monitoring but also provides a broadly applicable strategy for self‐powered strain sensing in diverse scenarios, paving the way for highly integrated autonomous sensing systems.
- 24 January 2026
- Published by Wiley in Advanced Functional Materials
- Vol. 36 (35)
Deformation‐Modulated Hydrovoltaic Effect for Continuous Self‐Powered Strain Sensing
Strain sensors capable of continuous, self‐powered operation are critical for biomedical and environmental monitoring systems, yet remain challenging to realize. Here, we report a hydrovoltaic self‐powered strain sensor (HVSP) based on flexible silicon nanowire arrays. The sensor exploits deformation‐induced modulation of hydrovoltaic electrical output, enabling persistent monitoring of both dynamic and quasi‐static strains without external power sources, which effectively overcomes the transient‐signal limitation of existing self‐powered strain sensors. The HVSP sensor exhibits a high gauge factor of −135, comparable to commercial silicon strain gauges, alongside excellent cyclic stability and durability. Integration with contact lenses demonstrates sensitive intraocular pressure monitoring across physiological ranges (7.5–30 mmHg) with a responsivity of −4.4 mV/mmHg and detection resolution of 0.74 mmHg, performance that surpasses clinical tonometry standards. Biocompatibility tests confirm cytocompatibility and conformal ocular surface integration, while powering an LED in simulated tear reveals the potential of the HVSP sensor for seamless integration into functional systems and straightforward visual feedback. This work introduces a novel hydrovoltaic sensing mechanism that not only enables high‐performance physiological monitoring but also provides a broadly applicable strategy for self‐powered strain sensing in diverse scenarios, paving the way for highly integrated autonomous sensing systems.
- 19 January 2026
- Published by IOP Publishing in Nanotechnology
- Vol. 37 (6)
A conformal silver wire top electrode for enhanced hydrovoltaic power generation from silicon nanowire arrays
Silicon nanowire (SiNW) arrays present a promising platform for high-performance hydrovoltaic devices (HDs). However, charge extraction from the SiNW tips remains a key challenge. This work introduces a silver wire (AgW) network as a conjoint top electrode to enable high-efficiency charge collection. The in-situ assembled AgWs form a conformal conductive network that bridges numerous SiNW tips in parrel, effectively interconnecting independent SiNW hydrovoltaic microunits and facilitating efficient charge transport to grid electrodes. Systematic optimization reveals that an AgW areal density of 0.050 mg/cm² leads to a significant performance boost of SiNW HDs, achieving a 101% increase in output power density compared to reference devices. Furthermore, the AgW conjoint top electrode exhibits good stability under hydrodynamic flushing (13.5 m/min), with only an initial 12% performance decay due to the removal of loosely bound nanowires, followed by consistent output over repeated flushing cycles. This work demonstrates a simple yet effective strategy for enhancing charge collection in SiNW HDs, offering a practical pathway toward new-type silicon-based energy harvesting systems.
- 19 January 2026
- Published by IOP Publishing in Nanotechnology
- Vol. 37 (6)
A conformal silver wire top electrode for enhanced hydrovoltaic power generation from silicon nanowire arrays
Silicon nanowire (SiNW) arrays present a promising platform for high-performance hydrovoltaic devices (HDs). However, charge extraction from the SiNW tips remains a key challenge. This work introduces a silver wire (AgW) network as a conjoint top electrode to enable high-efficiency charge collection. The in-situ assembled AgWs form a conformal conductive network that bridges numerous SiNW tips in parrel, effectively interconnecting independent SiNW hydrovoltaic microunits and facilitating efficient charge transport to grid electrodes. Systematic optimization reveals that an AgW areal density of 0.050 mg/cm² leads to a significant performance boost of SiNW HDs, achieving a 101% increase in output power density compared to reference devices. Furthermore, the AgW conjoint top electrode exhibits good stability under hydrodynamic flushing (13.5 m/min), with only an initial 12% performance decay due to the removal of loosely bound nanowires, followed by consistent output over repeated flushing cycles. This work demonstrates a simple yet effective strategy for enhancing charge collection in SiNW HDs, offering a practical pathway toward new-type silicon-based energy harvesting systems.
- 11 December 2025
- Published by Royal Society of Chemistry (RSC) in Journal of Materials Chemistry C
- Vol. 13 (48) , 23881-23888
Novel molecule design for surface modification enables highly selective DMMP detection with silicon nanoribbon FET sensors
A novel HFIPPUT molecule was designed and synthesized for surface modification of a silicon-based FET, which enables highly selective and sensitive detection of DMMP.
- 11 December 2025
- Published by Royal Society of Chemistry (RSC) in Journal of Materials Chemistry C
- Vol. 13 (48) , 23881-23888
Novel molecule design for surface modification enables highly selective DMMP detection with silicon nanoribbon FET sensors
A novel HFIPPUT molecule was designed and synthesized for surface modification of a silicon-based FET, which enables highly selective and sensitive detection of DMMP.
- 1 October 2025
- Published by American Physical Society (APS) in Physical Review Letters
- Vol. 135 (14) , 146905
Unidirectional Giant Exciton Emission into a Photonic Waveguide
Efficient coupling of nanolight sources into photonic waveguides is crucial for integrated photonics, quantum technologies, and biosensing. Practical implementations require light sources with simultaneous high brightness and unidirectional emission. However, it is fundamentally incompatible between strong electromagnetic field confinement and directional radiation. Here, we demonstrate the simultaneous giant excitonic photoluminescence (PL) enhancement and unidirectional emission from a two-dimensional InSe film integrated with an asymmetric plasmonic nanocavity. A 3500-fold PL enhancement is achieved by engineering spatial, spectral, and orientational overlap between cavity modes and out-of-plane excitons in InSe. Symmetry breaking within the nanocavity ensures precise control of emission interference, yielding a record-high directivity exceeding 15 dB. The design achieves a high coupling efficiency of 24% and supports guided light propagation of 140 μm. Our results establish a scalable approach for the ultracompact integration of nanoscale light sources into monolithic photonic circuits and will advance the development of on-chip nanophotonics.
- 1 October 2025
- Published by American Physical Society (APS) in Physical Review Letters
- Vol. 135 (14) , 146905
Unidirectional Giant Exciton Emission into a Photonic Waveguide
Efficient coupling of nanolight sources into photonic waveguides is crucial for integrated photonics, quantum technologies, and biosensing. Practical implementations require light sources with simultaneous high brightness and unidirectional emission. However, it is fundamentally incompatible between strong electromagnetic field confinement and directional radiation. Here, we demonstrate the simultaneous giant excitonic photoluminescence (PL) enhancement and unidirectional emission from a two-dimensional InSe film integrated with an asymmetric plasmonic nanocavity. A 3500-fold PL enhancement is achieved by engineering spatial, spectral, and orientational overlap between cavity modes and out-of-plane excitons in InSe. Symmetry breaking within the nanocavity ensures precise control of emission interference, yielding a record-high directivity exceeding 15 dB. The design achieves a high coupling efficiency of 24% and supports guided light propagation of 140 μm. Our results establish a scalable approach for the ultracompact integration of nanoscale light sources into monolithic photonic circuits and will advance the development of on-chip nanophotonics.
- 6 September 2025
- Published by Springer Nature in Journal of Materials Science: Materials in Electronics
- Vol. 36 (25) , 1-10
Highly sensitive and linear-response temperature sensor based on carbon nanotube/PDMS composites for body temperature monitoring
- 6 September 2025
- Published by Springer Nature in Journal of Materials Science: Materials in Electronics
- Vol. 36 (25) , 1-10
Highly sensitive and linear-response temperature sensor based on carbon nanotube/PDMS composites for body temperature monitoring
- 23 July 2025
- Published by American Chemical Society (ACS) in ACS Applied Nano Materials
- Vol. 8 (30) , 15050-15059
Flexible, Self-Powered Humidity Sensor Based on Silicon Nanoparticle Composites for Moisture Monitoring in Wearables
- 23 July 2025
- Published by American Chemical Society (ACS) in ACS Applied Nano Materials
- Vol. 8 (30) , 15050-15059
Flexible, Self-Powered Humidity Sensor Based on Silicon Nanoparticle Composites for Moisture Monitoring in Wearables
- 19 May 2025
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 17 (22) , 32194-32202
Tandem Silicon Photovoltaic/Hydrovoltaic Devices for Synergistic Utilization of Solar Energy
In conventional photovoltaic (PV) devices, sub-bandgap photons remain unutilized, contributing to heat accumulation and temperature-induced efficiency losses. Here, we present a tandem silicon photovoltaic/hydrovoltaic (PV/HV) device designed for synergistic and highly efficient solar energy utilization. In this configuration, photons with energies above the silicon bandgap drive PV electricity generation, while the remaining solar energy is converted into thermal energy to facilitate water evaporation, enabling HV electricity generation and water purification. A thermally conductive pathway, formed by silicon and copper, ensures efficient heat transfer from the heat-averse PV device to the heat-utilizing HV device, synergistically improving the performance of each module. As a result, the equivalent power output under 1 sun illumination is improved from 200 ± 3 W·m-2 of a single PV device to 205 ± 3 W·m-2 of the tandem PV/HV devices. Moreover, the tandem devices can generate purified water at a rate of 0.78 ± 0.05 kg·m-2·h-1. This work presents an effective strategy for the comprehensive and efficient utilization of solar energy.
- 19 May 2025
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 17 (22) , 32194-32202
Tandem Silicon Photovoltaic/Hydrovoltaic Devices for Synergistic Utilization of Solar Energy
In conventional photovoltaic (PV) devices, sub-bandgap photons remain unutilized, contributing to heat accumulation and temperature-induced efficiency losses. Here, we present a tandem silicon photovoltaic/hydrovoltaic (PV/HV) device designed for synergistic and highly efficient solar energy utilization. In this configuration, photons with energies above the silicon bandgap drive PV electricity generation, while the remaining solar energy is converted into thermal energy to facilitate water evaporation, enabling HV electricity generation and water purification. A thermally conductive pathway, formed by silicon and copper, ensures efficient heat transfer from the heat-averse PV device to the heat-utilizing HV device, synergistically improving the performance of each module. As a result, the equivalent power output under 1 sun illumination is improved from 200 ± 3 W·m-2 of a single PV device to 205 ± 3 W·m-2 of the tandem PV/HV devices. Moreover, the tandem devices can generate purified water at a rate of 0.78 ± 0.05 kg·m-2·h-1. This work presents an effective strategy for the comprehensive and efficient utilization of solar energy.
- 14 May 2025
- Published by Springer Nature in Science China Technological Sciences
- Vol. 68 (6) , 1-9
Nickel-coated polystyrene microsphere electrodes boost power output of silicon nanowire hydrovoltaic devices
- 14 May 2025
- Published by Springer Nature in Science China Technological Sciences
- Vol. 68 (6) , 1-9
Nickel-coated polystyrene microsphere electrodes boost power output of silicon nanowire hydrovoltaic devices
- Open Access
A deformation mismatch strategy enables over 120% stretchability of encapsulated serpentine silicon strips for stretchable electronics
It is significant to develop stretchable electronics based on silicon materials for practical applications. Although various stretchable silicon structures have been reported, electronic systems based on them exhibit limited stretchability due to the constraints between them and polymer substrates. Here, an innovative strategy of deformation mismatch is proposed to break the constraints between silicon structures and polymers and effectively reduce the strain concentration in silicon structures. As a result, encapsulated serpentine silicon strips (S‐Si strips) achieve unprecedented stretchability, exceeding 120%. The encapsulated S‐Si strip also exhibits remarkable mechanical stability and durability, enduring 100 000 cycles of 100% stretch without fracture. The effect of key parameters, including the central angle, thickness, and width of the S‐Si strip, on the deformation mismatch is revealed through combing experiments and theoretical analysis, which will guide the rational implementation of the deformation mismatch strategy. Electrical testing showcases the strain‐insensitive nature and good electrical stability of encapsulated S‐Si strips, benefiting practical applications. This work provides a new paradigm of silicon materials with excellent stretchability and will facilitate the development of stretchable electronics.
Open AccessA deformation mismatch strategy enables over 120% stretchability of encapsulated serpentine silicon strips for stretchable electronics
It is significant to develop stretchable electronics based on silicon materials for practical applications. Although various stretchable silicon structures have been reported, electronic systems based on them exhibit limited stretchability due to the constraints between them and polymer substrates. Here, an innovative strategy of deformation mismatch is proposed to break the constraints between silicon structures and polymers and effectively reduce the strain concentration in silicon structures. As a result, encapsulated serpentine silicon strips (S‐Si strips) achieve unprecedented stretchability, exceeding 120%. The encapsulated S‐Si strip also exhibits remarkable mechanical stability and durability, enduring 100 000 cycles of 100% stretch without fracture. The effect of key parameters, including the central angle, thickness, and width of the S‐Si strip, on the deformation mismatch is revealed through combing experiments and theoretical analysis, which will guide the rational implementation of the deformation mismatch strategy. Electrical testing showcases the strain‐insensitive nature and good electrical stability of encapsulated S‐Si strips, benefiting practical applications. This work provides a new paradigm of silicon materials with excellent stretchability and will facilitate the development of stretchable electronics.
- 24 June 2024
- Published by Wiley in Advanced Engineering Materials
- Vol. 26 (15)
Elastic Stretch Limit Exceeding 10% for Silicon Wires with Submicron to Micron Diameters
It is significant to modulate the bandgap of crystalline silicon (c‐Si) by applying large strains on it through controlled stretch. However, investigations on the stretchability of c‐Si are still insufficient, especially for samples with feature sizes in the submicron to micron scale. In this work, the large stretchability of silicon wires with submicron to micron diameters (SiMWs) is reported for the first time by using vapor–liquid–solid grown ultralong SiMWs. The diameters of the SiMW specimens range from 400 nm to 1.8 μm. The loading speed for stretching SiMWs is 100 nm s−1. It is found that the SiMWs with micron diameter have a stretch limit over 10%, while the stretch limit for samples with submicron diameter can reach 12%. The results fill the gaps in the knowledge of micron‐scale silicon materials’ stretchability. The average Young's modulus of SiMWs is measured as 115 GPa. Cyclic loading tests indicate that the tensile deformation of SiMWs is elastic and reversible with no plastic deformation observed. In this work, it is shown that large stretch of SiMWs can be achieved without the need of harsh experimental conditions, which will greatly facilitate the study of large strain engineering on c‐Si to modulate their properties and broaden their applications.
- 24 June 2024
- Published by Wiley in Advanced Engineering Materials
- Vol. 26 (15)
Elastic Stretch Limit Exceeding 10% for Silicon Wires with Submicron to Micron Diameters
It is significant to modulate the bandgap of crystalline silicon (c‐Si) by applying large strains on it through controlled stretch. However, investigations on the stretchability of c‐Si are still insufficient, especially for samples with feature sizes in the submicron to micron scale. In this work, the large stretchability of silicon wires with submicron to micron diameters (SiMWs) is reported for the first time by using vapor–liquid–solid grown ultralong SiMWs. The diameters of the SiMW specimens range from 400 nm to 1.8 μm. The loading speed for stretching SiMWs is 100 nm s−1. It is found that the SiMWs with micron diameter have a stretch limit over 10%, while the stretch limit for samples with submicron diameter can reach 12%. The results fill the gaps in the knowledge of micron‐scale silicon materials’ stretchability. The average Young's modulus of SiMWs is measured as 115 GPa. Cyclic loading tests indicate that the tensile deformation of SiMWs is elastic and reversible with no plastic deformation observed. In this work, it is shown that large stretch of SiMWs can be achieved without the need of harsh experimental conditions, which will greatly facilitate the study of large strain engineering on c‐Si to modulate their properties and broaden their applications.