Loretta Batali
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Research Interests
Loretta Batali has a total of 26 co-authors. Here are the top co-authors by number of shared publications:
Alexandru Dimache
2 shared publicationsGheorghe Pantel
2 shared publicationsHoratiu Popa
2 shared publications- Horatiu Popa
Univ. Prof. Dr.; Technical University of Civil Engineering Bucharest; Lacul Tei Boulevard No. 122-124 020396 Bucharest Romania
2 shared publications Iulian Iancu
2 shared publicationsA Marcu
1 shared publication
Latest Publications
- Open Access
- 17 September 2024
- Published by Taylor & Francis
- p. 2093-2096
Use of the Brazilian test and frost sensitivity test for determining the aptitude for earthworks of difficult soils stabilized by special lime-based binder
Strength, durability and stability of earthworks during service depend on the quality of soils they are made of, the execution technology and maintenance. Often, earthworks have to be built using poor quality soils that needs improvement or stabilization by using binders. For establishing the modifications brought by binder mixing and the long-term characteristics of the improved materials, laboratory tests are used, many of them being adapted, as the resulting material is sometimes away of the untreated soil properties. Therefore, research is still conducted for determining the best way of testing the properties of improved soils, especially considering the extensive use nowadays of these techniques. The paper, which continues a series of articles published on the subject, will determine the degree of sensitivity to frost in comparison with the durability performances to freeze – thaw cycles. The research studied the performances during time of a clay treated by special lime – based binder (3 and 4 %) by analysing the mechanical and frost sensitivity behaviour. Sample to be tested where produced in laboratory using 2 compaction energies – normal and modified Proctor. The mechanical behaviour during the time was studied by determining the compression strength and the indirect tensile strength (Brazilian test), while the frost sensitivity was established based on the swelling coefficient and the consistency state of the soil after freezing.
- 17 September 2024
- Published by Taylor & Francis
- p. 2093-2096
Open AccessUse of the Brazilian test and frost sensitivity test for determining the aptitude for earthworks of difficult soils stabilized by special lime-based binder
Strength, durability and stability of earthworks during service depend on the quality of soils they are made of, the execution technology and maintenance. Often, earthworks have to be built using poor quality soils that needs improvement or stabilization by using binders. For establishing the modifications brought by binder mixing and the long-term characteristics of the improved materials, laboratory tests are used, many of them being adapted, as the resulting material is sometimes away of the untreated soil properties. Therefore, research is still conducted for determining the best way of testing the properties of improved soils, especially considering the extensive use nowadays of these techniques. The paper, which continues a series of articles published on the subject, will determine the degree of sensitivity to frost in comparison with the durability performances to freeze – thaw cycles. The research studied the performances during time of a clay treated by special lime – based binder (3 and 4 %) by analysing the mechanical and frost sensitivity behaviour. Sample to be tested where produced in laboratory using 2 compaction energies – normal and modified Proctor. The mechanical behaviour during the time was studied by determining the compression strength and the indirect tensile strength (Brazilian test), while the frost sensitivity was established based on the swelling coefficient and the consistency state of the soil after freezing.
- Open Access
- 7 March 2022
- Published by MDPI AG in Applied Sciences
- Vol. 12 (5) , 2743
Seismic Behavior of Micropiles and Micropiled Structures Used for Increasing Resilience: A Literature Review
The aim of this paper is to present the relevant information and development available in the scientific literature regarding the seismic behavior of micropiles (MPs) and micropiled structures (MPed). The seismic behavior of MPs is not very well studied, but MPs are used in retrofitting of old buildings and for new resilient buildings, and in terms of seismic behavior they have a high potential. Additionally, their association with seismic dampers for improving the seismic behavior of buildings is not yet fully studied and it represents a major topic of interest for both new structures and historical monuments. After the introductory part, the paper describes all relevant information regarding MPs, as types and technology, seismic behavior, applications for increasing seismic resilience, and experimental and numerical modeling.
- 7 March 2022
- Published by MDPI AG in Applied Sciences
- Vol. 12 (5) , 2743
Open AccessSeismic Behavior of Micropiles and Micropiled Structures Used for Increasing Resilience: A Literature Review
The aim of this paper is to present the relevant information and development available in the scientific literature regarding the seismic behavior of micropiles (MPs) and micropiled structures (MPed). The seismic behavior of MPs is not very well studied, but MPs are used in retrofitting of old buildings and for new resilient buildings, and in terms of seismic behavior they have a high potential. Additionally, their association with seismic dampers for improving the seismic behavior of buildings is not yet fully studied and it represents a major topic of interest for both new structures and historical monuments. After the introductory part, the paper describes all relevant information regarding MPs, as types and technology, seismic behavior, applications for increasing seismic resilience, and experimental and numerical modeling.
- Open Access
- 1 May 2021
- Published by IOP Publishing in IOP Conference Series: Earth and Environmental Science
- Vol. 664 (1) , 012091
Study of soil characteristics after treatment with lime-based hydraulic binder using the in situ “layer by layer” stabilization method
Paper presents the results obtained in situ and in laboratory for a test section where the soil has been improved by mixing with a lime-based hydraulic binder. The treatment has been applied in order to obtain a more uniform soil bearing capacity, thus reducing the differential settlement that could appear between adjacent foundations or under the same foundation. The test section has been performed by mixing the local cohesive soil (silty clay) with 4% special lime-based hydraulic binder, then compacted in 3 layers, 20 cm thick each after compaction, resulting a final compacted layer of 60 cm. For this treatment a laboratory study has been conducted in order to determine the optimum binder admixture. The physical and mechanical characteristics of the improved soil have been studied in laboratory and in situ for 3 curing times: 3, 7 and 28 days. In laboratory have been carried out tests for identification and classification, for determining the density and water content, followed by mechanical tests as oedometers and shear box tests, while in situ Lukas plate tests have been performed. Paper presents results of all tests, including analyses and interpretation.
- 1 May 2021
- Published by IOP Publishing in IOP Conference Series: Earth and Environmental Science
- Vol. 664 (1) , 012091
Open AccessStudy of soil characteristics after treatment with lime-based hydraulic binder using the in situ “layer by layer” stabilization method
Paper presents the results obtained in situ and in laboratory for a test section where the soil has been improved by mixing with a lime-based hydraulic binder. The treatment has been applied in order to obtain a more uniform soil bearing capacity, thus reducing the differential settlement that could appear between adjacent foundations or under the same foundation. The test section has been performed by mixing the local cohesive soil (silty clay) with 4% special lime-based hydraulic binder, then compacted in 3 layers, 20 cm thick each after compaction, resulting a final compacted layer of 60 cm. For this treatment a laboratory study has been conducted in order to determine the optimum binder admixture. The physical and mechanical characteristics of the improved soil have been studied in laboratory and in situ for 3 curing times: 3, 7 and 28 days. In laboratory have been carried out tests for identification and classification, for determining the density and water content, followed by mechanical tests as oedometers and shear box tests, while in situ Lukas plate tests have been performed. Paper presents results of all tests, including analyses and interpretation.
- Open Access
- 22 February 2019
- Published by EDP Sciences
- Vol. 85, 08008
Monopile foundation under lateral cyclic action. Numerical modelling
Foundation of an off-shore wind mill is submitted throughout its existence to a very high number of cycles coming from lateral actions such as waves or wind. These actions have a strong aleatory character which makes them very hard to predict, quantify and analyse. Therefore, in current design practice, these actions are being considered as pseudo-static force at their maximum values, with the cyclic phenomenon being neglected. This can lead to an inappropriate design of the foundation, which could have a negative impact on the future structure. This type of structure is generally built on a monopile foundation, a single, large diameter pile, which will be submitted to thousands lateral cycles. The pile diameter plays an important role, influencing the behaviour of the entire structure. Centrifuge experiments on small-scale models are very useful to study such complex problem as piles under lateral cyclic loads. Several researches have been carried out internationally and the results can be used for calibrating numerical models, which is obviously a more accessible method of design, compared to an experimental approach. This has been precisely the starting point of this paper. The purpose of the present paper is to analyse the influence of the pile diameter, by using a FEM a numerical model, previously calibrated based on centrifuge experiments carried out at IFSTTAR Nantes. For the numerical modelling the software CESAR-LCPC 3D has been used. Several pile diameters have been considered, as follows: 0.72 m, 1.08 m, 1.44 m, 1.80 m, 2.16 m and 2.52 m. The results are taking into account the lateral displacement and bending moment of the piles, for static and cyclic loading. The main objective was to determine the stabilisation rate of the most important two design elements (pile head displacement and maximum bending moment) after “n” cycles and to eventually conclude the diameter value beyond which no more influence of cycles is recorded. The numerical model considered 15 cycles and the results have been used extrapolated in order to determine the cycle “n” of stabilisation (for displacement and bending moment).
- 22 February 2019
- Published by EDP Sciences
- Vol. 85, 08008
Open AccessMonopile foundation under lateral cyclic action. Numerical modelling
Foundation of an off-shore wind mill is submitted throughout its existence to a very high number of cycles coming from lateral actions such as waves or wind. These actions have a strong aleatory character which makes them very hard to predict, quantify and analyse. Therefore, in current design practice, these actions are being considered as pseudo-static force at their maximum values, with the cyclic phenomenon being neglected. This can lead to an inappropriate design of the foundation, which could have a negative impact on the future structure. This type of structure is generally built on a monopile foundation, a single, large diameter pile, which will be submitted to thousands lateral cycles. The pile diameter plays an important role, influencing the behaviour of the entire structure. Centrifuge experiments on small-scale models are very useful to study such complex problem as piles under lateral cyclic loads. Several researches have been carried out internationally and the results can be used for calibrating numerical models, which is obviously a more accessible method of design, compared to an experimental approach. This has been precisely the starting point of this paper. The purpose of the present paper is to analyse the influence of the pile diameter, by using a FEM a numerical model, previously calibrated based on centrifuge experiments carried out at IFSTTAR Nantes. For the numerical modelling the software CESAR-LCPC 3D has been used. Several pile diameters have been considered, as follows: 0.72 m, 1.08 m, 1.44 m, 1.80 m, 2.16 m and 2.52 m. The results are taking into account the lateral displacement and bending moment of the piles, for static and cyclic loading. The main objective was to determine the stabilisation rate of the most important two design elements (pile head displacement and maximum bending moment) after “n” cycles and to eventually conclude the diameter value beyond which no more influence of cycles is recorded. The numerical model considered 15 cycles and the results have been used extrapolated in order to determine the cycle “n” of stabilisation (for displacement and bending moment).
- Open Access
- 22 February 2019
- Published by EDP Sciences
- Vol. 85, 07017
Experimental studies to determine the physico-mechanical characteristics of soils improved with special hydraulic binders
The complexity of the construction works and site conditions, combined with environmental factors, led to the necessity of using special mineral binders with physical and chemical properties superior to the usual binders. Taking into account the above arguments, the paper presents the results of experimental laboratory studies in order to determine the physical and mechanical characteristics of soil used for a road embankment, after improvement with a special lime-based hydraulic binder. Since improvement recipes vary from one soil to another, it is important to always determine the characteristics after treatment. Also, the method of mixing the binder and soil decisively determines subsequent performance. As part of a larger study aiming at assessing the various factors of influence on the treated soil characteristics, two comparative studies were carried out, each consisting in the recipe formulation using 3 different binder ratios, the difference being given by the parameters used for specimen compaction: normal or modified Proctor test. The study followed the influence of the mechanical compaction work on the mechanical behaviour of the specimens over time after different times of curing.
- 22 February 2019
- Published by EDP Sciences
- Vol. 85, 07017
Open AccessExperimental studies to determine the physico-mechanical characteristics of soils improved with special hydraulic binders
The complexity of the construction works and site conditions, combined with environmental factors, led to the necessity of using special mineral binders with physical and chemical properties superior to the usual binders. Taking into account the above arguments, the paper presents the results of experimental laboratory studies in order to determine the physical and mechanical characteristics of soil used for a road embankment, after improvement with a special lime-based hydraulic binder. Since improvement recipes vary from one soil to another, it is important to always determine the characteristics after treatment. Also, the method of mixing the binder and soil decisively determines subsequent performance. As part of a larger study aiming at assessing the various factors of influence on the treated soil characteristics, two comparative studies were carried out, each consisting in the recipe formulation using 3 different binder ratios, the difference being given by the parameters used for specimen compaction: normal or modified Proctor test. The study followed the influence of the mechanical compaction work on the mechanical behaviour of the specimens over time after different times of curing.
- Open Access
- 20 June 2018
- Published by STEF92 Technology
- Vol. 18
NUMERICAL ANALYSIS OF THE BEHAVIOUR OF A FLEXIBLE PILE FOUNDATION VERSUS A RIGID ONE UNDER LATERAL CYCLIC ACTION
- 20 June 2018
- Published by STEF92 Technology
- Vol. 18
Open AccessNUMERICAL ANALYSIS OF THE BEHAVIOUR OF A FLEXIBLE PILE FOUNDATION VERSUS A RIGID ONE UNDER LATERAL CYCLIC ACTION
Examples for evaluation of material factoring approach using staged construction in numerical models
Numerical modelling by finite elements for a pile foundation under lateral cyclic action
The present paper is proposing to make a comparison between numerical results using Finite Element Method and experimental ones, for an isolated pile foundation in sandy soil, submitted to cyclic actions from wave or wind. 3D numerical modelling was performed in CESAR – LCPC software, using Drucker‐Prager constitutive law with kinematic hardening for the soil. The small‐scale centrifuge test results were obtained by IFFSTAR Nantes. The numerical and the experimental results, concerning the pile head displacements were in good agreement.
Numerical modelling by finite elements for a pile foundation under lateral cyclic action
The present paper is proposing to make a comparison between numerical results using Finite Element Method and experimental ones, for an isolated pile foundation in sandy soil, submitted to cyclic actions from wave or wind. 3D numerical modelling was performed in CESAR – LCPC software, using Drucker‐Prager constitutive law with kinematic hardening for the soil. The small‐scale centrifuge test results were obtained by IFFSTAR Nantes. The numerical and the experimental results, concerning the pile head displacements were in good agreement.
- Open Access
- 1 March 2017
- Published by Elsevier in Energy Procedia
- Vol. 112, 481-488
Instability Phenomena in Municipal Waste Landfill. Numerical Modeling in Saturated and Unsaturated Conditions
- 1 March 2017
- Published by Elsevier in Energy Procedia
- Vol. 112, 481-488
Open AccessInstability Phenomena in Municipal Waste Landfill. Numerical Modeling in Saturated and Unsaturated Conditions
- Open Access
- 1 January 2016
- Published by Elsevier in Procedia Engineering
- Vol. 143, 284-291
Slope Stability Analysis Using the Unsaturated Stress Analysis. Case Study
- 1 January 2016
- Published by Elsevier in Procedia Engineering
- Vol. 143, 284-291
Open AccessSlope Stability Analysis Using the Unsaturated Stress Analysis. Case Study