Larbi Setti
Larbi Setti has a total of 42 co-authors. Here are the top co-authors by number of shared publications:
- Redi Kristian Pingak
The University of Sydney
3 shared publications Soukaina Bouhmaidi
3 shared publications- Soukaina Bouhmaidi
Laboratory of Advanced Science and Technologies, FPL, Abdelmalek Essaadi University, Morocco
3 shared publications - Anouar Mondir
Abdelmalek Essaadi University
2 shared publications Fatima Zahra Hanin
Department of Physics, Faculty of Sciences, UAE, Tetouan, Morocco
2 shared publications- Shakeel Ahmad2 shared publications
Latest Publications
- Open Access
- 6 December 2025
- Published by University of Thi-Qar in University of Thi-Qar Journal of Science
- Vol. 12 (2) , 41-50
DFT Study of Cu₂O/Carbon-Based Nanomaterials Interacting with Zn and ZnS
Copper oxide (I)/carbon-based nanomaterials have a great attention nowadays due to their potential in electronic and thermoelectric applications. In this study, density functional theory (DFT) was applied using the B3LYP hybrid function and the B3LYP 6-31G basis set to study the properties of (6Cu2O/C17) and (4Cu2O/C8) structures, as well as their interactions with zinc sulphide (ZnS) and zinc (Zn). The calculations included the determination of molecular geometry, contour density maps, electrostatic potential surfaces, spectra, HOMO and LUMO energies, band gap, dipole moment, polarizability, point group symmetry, and three states (DOS). The results showed that the interaction between (6Cu2O/C17) and (Zn, ZnS) led to a clear charge transfer and exchange, which was reflected in the density and electrostatic potential maps. The structures (6Cu2O/C17), (6Cu2O/C17–Zn), and (6Cu2O/C17–ZnS) also revealed narrow band gaps (~0.3 eV), which enhances their thermoelectric properties. Furthermore, interaction with ZnS increased the dipole moment from (2.99 Debye) to (15.33 Debye), indicating its potential for use in high dielectric materials. The (4Cu2O/C8) structure showed Cs group symmetry, which makes it important for optical applications. DOS maps also showed the emergence of new energy states resulting from interaction with Zn and ZnS. These results demonstrate that the studied nanostructures possess promising electronic, optical, and thermoelectric properties, qualifying them for practical applications in energy conversion and advanced device fabrication.
- 6 December 2025
- Published by University of Thi-Qar in University of Thi-Qar Journal of Science
- Vol. 12 (2) , 41-50
Open AccessDFT Study of Cu₂O/Carbon-Based Nanomaterials Interacting with Zn and ZnS
Copper oxide (I)/carbon-based nanomaterials have a great attention nowadays due to their potential in electronic and thermoelectric applications. In this study, density functional theory (DFT) was applied using the B3LYP hybrid function and the B3LYP 6-31G basis set to study the properties of (6Cu2O/C17) and (4Cu2O/C8) structures, as well as their interactions with zinc sulphide (ZnS) and zinc (Zn). The calculations included the determination of molecular geometry, contour density maps, electrostatic potential surfaces, spectra, HOMO and LUMO energies, band gap, dipole moment, polarizability, point group symmetry, and three states (DOS). The results showed that the interaction between (6Cu2O/C17) and (Zn, ZnS) led to a clear charge transfer and exchange, which was reflected in the density and electrostatic potential maps. The structures (6Cu2O/C17), (6Cu2O/C17–Zn), and (6Cu2O/C17–ZnS) also revealed narrow band gaps (~0.3 eV), which enhances their thermoelectric properties. Furthermore, interaction with ZnS increased the dipole moment from (2.99 Debye) to (15.33 Debye), indicating its potential for use in high dielectric materials. The (4Cu2O/C8) structure showed Cs group symmetry, which makes it important for optical applications. DOS maps also showed the emergence of new energy states resulting from interaction with Zn and ZnS. These results demonstrate that the studied nanostructures possess promising electronic, optical, and thermoelectric properties, qualifying them for practical applications in energy conversion and advanced device fabrication.
- Open Access
- 28 July 2023
- Published by Springer Nature in Research Square
High Gain 2X2 Planar Array Antenna for 5G Applications at 3.6GHz
In this study, we propose the design of an antenna array applicable to fifth-generation (5G) smartphones. The proposed antenna structure consists of a 2 x 2 patch antenna. The proposed antenna has a small size of 106.07 x 106.07 mm2 and is printed on an FR-4 substrate. It has good radiation efficiency in the 3.6 GHz band and a high gain of 10.6 dB. The bandwidth of the proposed antenna, which is useful for 5G applications, is approximately 0.38 GHz (3.877 - 3.295 GHz) and includes the allocated band from (3400 MHz to 3600 MHz) for 5G cellular communication systems. The objective of this work is to characterise a new antenna using the wave concept iterative procedure (WCIP), a fast numerical method, and validation is carried out by comparison using finite integration techniques (FIT). The results obtained from the two methods are in close agreement, validating the design concept. Thanks to its simple structure, compact size, good radiation performance and ease of manufacture and integration with application-specific printed circuit boards, this antenna is suitable for 5G applications. The structure was created and examined using a Keysight PNA network analyser to demonstrate its effectiveness and compliance. The prototype antenna shown is tested and the measured results are in good agreement with the WCIP method.
- 28 July 2023
- Published by Springer Nature in Research Square
Open AccessHigh Gain 2X2 Planar Array Antenna for 5G Applications at 3.6GHz
In this study, we propose the design of an antenna array applicable to fifth-generation (5G) smartphones. The proposed antenna structure consists of a 2 x 2 patch antenna. The proposed antenna has a small size of 106.07 x 106.07 mm2 and is printed on an FR-4 substrate. It has good radiation efficiency in the 3.6 GHz band and a high gain of 10.6 dB. The bandwidth of the proposed antenna, which is useful for 5G applications, is approximately 0.38 GHz (3.877 - 3.295 GHz) and includes the allocated band from (3400 MHz to 3600 MHz) for 5G cellular communication systems. The objective of this work is to characterise a new antenna using the wave concept iterative procedure (WCIP), a fast numerical method, and validation is carried out by comparison using finite integration techniques (FIT). The results obtained from the two methods are in close agreement, validating the design concept. Thanks to its simple structure, compact size, good radiation performance and ease of manufacture and integration with application-specific printed circuit boards, this antenna is suitable for 5G applications. The structure was created and examined using a Keysight PNA network analyser to demonstrate its effectiveness and compliance. The prototype antenna shown is tested and the measured results are in good agreement with the WCIP method.
- Open Access
- 30 May 2023
- Published by Universitas Gadjah Mada in Indonesian Journal of Chemistry
- Vol. 23 (3) , 843-862
Structural, Electronic, Elastic, and Optical Properties of Cubic BaLiX3 (X = F, Cl, Br, or I) Perovskites: An Ab-initio DFT Study
This study reports for the first time the theoretical prediction of structural, electronic, elastic and optical properties of cubic BaLiCl3, BaLiBr3, and BaLiI3 perovskites. The corresponding properties of the well-known BaLiF3 are also theoretically investigated. Density Functional Theory (DFT) using the Generalized Gradient Approximation (GGA) was implemented within the Quantum Espresso package to investigate the properties of the perovskites. The results revealed that BaLiX3 (X = F, Cl, Br, and I) are in ionic crystal forms with optimized lattice parameters of 4.04, 4.90, 5.21, and 5.66 Å, respectively. The minor band gaps were found to be 6.62 eV (Γ→Γ), 4.29 eV (R→Γ), 3.50 eV (R→Γ), and 2.58 eV (R→Γ) for the respective compounds. The investigation of their elastic properties indicated that these perovskites are all mechanically stable, while only BaLiBr3 and BaLiI3 are malleable. Finally, the studied perovskites exhibit excellent optical properties, including low reflectivity and high absorption in the ultraviolet region. Hence, it is predicted that these perovskites are suitable for various optoelectronic applications involving absorption in the UV region. However, BaLiBr3 and BaLiI3 are more favorable than BaLiF3 and BaLiCl3 to be deposited as thin films due to their flexibility.
- 30 May 2023
- Published by Universitas Gadjah Mada in Indonesian Journal of Chemistry
- Vol. 23 (3) , 843-862
Open AccessStructural, Electronic, Elastic, and Optical Properties of Cubic BaLiX3 (X = F, Cl, Br, or I) Perovskites: An Ab-initio DFT Study
This study reports for the first time the theoretical prediction of structural, electronic, elastic and optical properties of cubic BaLiCl3, BaLiBr3, and BaLiI3 perovskites. The corresponding properties of the well-known BaLiF3 are also theoretically investigated. Density Functional Theory (DFT) using the Generalized Gradient Approximation (GGA) was implemented within the Quantum Espresso package to investigate the properties of the perovskites. The results revealed that BaLiX3 (X = F, Cl, Br, and I) are in ionic crystal forms with optimized lattice parameters of 4.04, 4.90, 5.21, and 5.66 Å, respectively. The minor band gaps were found to be 6.62 eV (Γ→Γ), 4.29 eV (R→Γ), 3.50 eV (R→Γ), and 2.58 eV (R→Γ) for the respective compounds. The investigation of their elastic properties indicated that these perovskites are all mechanically stable, while only BaLiBr3 and BaLiI3 are malleable. Finally, the studied perovskites exhibit excellent optical properties, including low reflectivity and high absorption in the ultraviolet region. Hence, it is predicted that these perovskites are suitable for various optoelectronic applications involving absorption in the UV region. However, BaLiBr3 and BaLiI3 are more favorable than BaLiF3 and BaLiCl3 to be deposited as thin films due to their flexibility.
- Open Access
- 24 May 2023
- Published by Association for Computing Machinery (ACM)
- p. 1-23
The Impact of Radio Frequency (RF) Attacks on Security and Privacy: A Comprehensive Review
With the increasing use of wireless communication technologies, such as Radio Frequency Identification (RFID), Bluetooth Low Energy (BLE), ZigBee, and cellular networks, the risk of Radio Frequency (RF) attacks has become a significant concern for privacy and security. RF attacks can cause severe damage to an individual's privacy by enabling attackers to intercept, modify, or disrupt communication between wireless devices. This paper provides a comprehensive review of the impact of RF attacks on security and privacy. We start by providing an overview of RF attacks and their potential impacts on different types of wireless systems, including RFID/NFC, ADS-B, BLE, ZigBee, cellular networks, satellite communication, and 433/315 MHz communication. We then discuss the factors that determine the risk levels associated with RF attacks, such as the type of attack, the targeted system, and the attacker's resources. Next, we examine the classification of the effects of RF attacks on security and privacy. These effects can be classified into four categories: confidentiality, integrity, availability, and privacy. We discuss the specific effects that RF attacks can have on each of these categories and provide examples of real-world attacks. Finally, we review the potential solutions to address the security and privacy risks associated with RF attacks, including hardware and software-based solutions, as well as best practices for end-users. We also highlight some of the future research directions in this area, such as developing more secure and privacy-preserving wireless protocols and improving the detection and mitigation of RF attacks. Overall, this article aims to provide a comprehensive understanding of the effects of RF attacks on security and privacy and to highlight the importance of addressing these risks in wireless systems.
- 24 May 2023
- Published by Association for Computing Machinery (ACM)
- p. 1-23
Open AccessThe Impact of Radio Frequency (RF) Attacks on Security and Privacy: A Comprehensive Review
With the increasing use of wireless communication technologies, such as Radio Frequency Identification (RFID), Bluetooth Low Energy (BLE), ZigBee, and cellular networks, the risk of Radio Frequency (RF) attacks has become a significant concern for privacy and security. RF attacks can cause severe damage to an individual's privacy by enabling attackers to intercept, modify, or disrupt communication between wireless devices. This paper provides a comprehensive review of the impact of RF attacks on security and privacy. We start by providing an overview of RF attacks and their potential impacts on different types of wireless systems, including RFID/NFC, ADS-B, BLE, ZigBee, cellular networks, satellite communication, and 433/315 MHz communication. We then discuss the factors that determine the risk levels associated with RF attacks, such as the type of attack, the targeted system, and the attacker's resources. Next, we examine the classification of the effects of RF attacks on security and privacy. These effects can be classified into four categories: confidentiality, integrity, availability, and privacy. We discuss the specific effects that RF attacks can have on each of these categories and provide examples of real-world attacks. Finally, we review the potential solutions to address the security and privacy risks associated with RF attacks, including hardware and software-based solutions, as well as best practices for end-users. We also highlight some of the future research directions in this area, such as developing more secure and privacy-preserving wireless protocols and improving the detection and mitigation of RF attacks. Overall, this article aims to provide a comprehensive understanding of the effects of RF attacks on security and privacy and to highlight the importance of addressing these risks in wireless systems.
- Open Access
- 24 May 2022
- Published by EDP Sciences in E3S Web of Conferences
- Vol. 351, 01085
A New PIFA Antenna For Future Mobile and Wireless Communication
In this work, a new antenna will be presented in the form of F-inverted working at 28Ghz frequency is proposed for 5G wireless com- munications. This antenna has been designed based on an FR-4. with shaped slots on the patch and interdigital slots in the ground for band- width enhancement. The PIFA antenna has an operating frequency of 28 GHz with S11,-39.0885 dB, while the peak gain is 7.85dBi. Therefore, it is suitable for applications of 5G wireless communications with good matching and return loss characteristics. The proposed design model and performance evaluation of the PIFA antenna has been executed by CST Microwave Studio and HFSS.
- 24 May 2022
- Published by EDP Sciences in E3S Web of Conferences
- Vol. 351, 01085
Open AccessA New PIFA Antenna For Future Mobile and Wireless Communication
In this work, a new antenna will be presented in the form of F-inverted working at 28Ghz frequency is proposed for 5G wireless com- munications. This antenna has been designed based on an FR-4. with shaped slots on the patch and interdigital slots in the ground for band- width enhancement. The PIFA antenna has an operating frequency of 28 GHz with S11,-39.0885 dB, while the peak gain is 7.85dBi. Therefore, it is suitable for applications of 5G wireless communications with good matching and return loss characteristics. The proposed design model and performance evaluation of the PIFA antenna has been executed by CST Microwave Studio and HFSS.
- Top Cited Papers
- 7 March 2022
- Published by Elsevier in Computational Condensed Matter
- Vol. 31
A DFT study of electronic, optical and thermoelectric properties of Ge-halide perovskites CsGeX3 (X=F, Cl and Br)
- 7 March 2022
- Published by Elsevier in Computational Condensed Matter
- Vol. 31
Top Cited PapersA DFT study of electronic, optical and thermoelectric properties of Ge-halide perovskites CsGeX3 (X=F, Cl and Br)