Mouiz Wal-Ikram Aremou Yessoufou
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Previous Organizations / Institutes
The organizations / institutes from the scholar's other articles in the past ten years
Research Subjects
Research Interests
Mouiz Wal-Ikram Aremou Yessoufou has a total of 30 co-authors. Here are the top co-authors by number of shared publications:
- Pierre Bienvenu Irénikatché Akponikpè
Laboratory of Hydraulics and Environmental Modeling (HydroModE‐Lab), Faculty of Agronomy University of Parakou (UP) Parakou Benin
5 shared publications - Pierre Gbènoukpo Tovihoudji
Laboratory of Hydraulics and Environmental Modeling (HydroModE-Lab), Faculty of Agronomy, University of Parakou, Parakou, Benin
4 shared publications Sissou Zakari
Université de Parakou
4 shared publications- Sissou Zakari
Laboratory of Hydraulics and Environmental Modeling (HydroModE‐Lab), Faculty of Agronomy University of Parakou (UP) Parakou Benin
4 shared publications Pierre G. Tovihoudji
Université de Parakou
3 shared publications- André Adjogboto
Laboratory of Hydraulics and Environmental Modeling (HydroModE‐Lab), Faculty of Agronomy University of Parakou (UP) Parakou Benin
2 shared publications
Latest Publications
- Open Access
- 28 October 2026
- Published by Public Library of Science (PLoS) in PLOS ONE
- Vol. 21 (10) , e0361710
Growth, yield and nutrient-use responses of drought-tolerant maize varieties to sowing date and fertilizer microdosing in northern Benin
Changing sowing dates has been a farming low-cost strategy to mitigate climate induced water stress during the juvenile stage of crops. This study evaluates the potential of drought-tolerant maize varieties and fertilizer microdosing to enhance maize productivity under different sowing dates in rainfed conditions. We conducted a two-year strip split-plot trial with three sowing dates (early, normal, and late), five maize varieties (DMR, TZEE, TZE, 2008Syn, and 2000Syn) and five fertilizer treatments (control: no fertilizer, three microdosed rates MD1: 25 kg N + 4 kg P ha -1 , MD2: 25 kg N + 8 kg P ha -1 , MD3: 35 kg N + 8 kg P ha -1 , and the recommended rate RR: 76 kg N + 13 kg P ha -1 ). DMR is a drought-susceptible variety; and TZEE, TZE, 2008Syn, and 2000Syn are drought-tolerant. Results show that grain yield was 9.9% higher and 10.2% lower under early and late sowing, respectively, compared to normal sowing. Grain yield was 29.9, 37.8, 26.5 and 12.5% higher under TZEE, TZE, 2008Syn, and 2000Syn, respectively compared to DMR; and 153.3, 200.9, 247.2 and 220.8% under MD1, MD2, MD3 and RR, respectively compared to control. DMR achieved its highest mean grain yield under the recommended fertilizer rate, whereas the drought-tolerant varieties achieved their highest mean yields under MD3. The findings confirm that late sowing reduced maize performance, while drought-tolerant varieties and fertilizer microdosing independently improved average productivity.
- 28 October 2026
- Published by Public Library of Science (PLoS) in PLOS ONE
- Vol. 21 (10) , e0361710
Open AccessGrowth, yield and nutrient-use responses of drought-tolerant maize varieties to sowing date and fertilizer microdosing in northern Benin
Changing sowing dates has been a farming low-cost strategy to mitigate climate induced water stress during the juvenile stage of crops. This study evaluates the potential of drought-tolerant maize varieties and fertilizer microdosing to enhance maize productivity under different sowing dates in rainfed conditions. We conducted a two-year strip split-plot trial with three sowing dates (early, normal, and late), five maize varieties (DMR, TZEE, TZE, 2008Syn, and 2000Syn) and five fertilizer treatments (control: no fertilizer, three microdosed rates MD1: 25 kg N + 4 kg P ha -1 , MD2: 25 kg N + 8 kg P ha -1 , MD3: 35 kg N + 8 kg P ha -1 , and the recommended rate RR: 76 kg N + 13 kg P ha -1 ). DMR is a drought-susceptible variety; and TZEE, TZE, 2008Syn, and 2000Syn are drought-tolerant. Results show that grain yield was 9.9% higher and 10.2% lower under early and late sowing, respectively, compared to normal sowing. Grain yield was 29.9, 37.8, 26.5 and 12.5% higher under TZEE, TZE, 2008Syn, and 2000Syn, respectively compared to DMR; and 153.3, 200.9, 247.2 and 220.8% under MD1, MD2, MD3 and RR, respectively compared to control. DMR achieved its highest mean grain yield under the recommended fertilizer rate, whereas the drought-tolerant varieties achieved their highest mean yields under MD3. The findings confirm that late sowing reduced maize performance, while drought-tolerant varieties and fertilizer microdosing independently improved average productivity.
- 22 September 2026
- Published by Wiley in Irrigation and Drainage
Enhancing maize ( Zea Mays L.) resilience to climate change: The role of supplemental irrigation and fertiliser microdosing in improving grain‐filling rates of drought‐tolerant varieties in northern Benin
Maize productivity depends on grain‐filling, which requires understanding the interactions among genotype, water and nutrient management. However, these interactions remain poorly investigated in Sub‐Saharan Africa (SSA). This study investigates the influence of supplemental irrigation (SI) and fertiliser microdosing on grain‐filling and yields of maize varieties. Field experiment involved three maize varieties (one drought‐sensitive variety: DMR‐ESR‐W; two drought‐tolerant varieties: TZE‐Y POP STR and 2000Syn EE‐W), two water regimes (rainfed vs. SI) and three fertiliser levels (unfertilised control, microdose: 25 kg N + 4 kg P + 8 kg K ha −1 and recommended: 76 kg N + 13 kg P + 25 kg K ha −1 ). The grain‐filling rate (GFR) reached 70 and 90 g day −1 under the rainfed and SI regimes, respectively. The GFR was higher in drought‐tolerant varieties (90–110 g day −1 ) than in drought‐sensitive varieties (70 g day −1 ). The effective grain‐filling duration and active grain‐filling period were 2 days shorter under SI than under rainfed conditions and 3–5 days shorter under drought‐tolerant varieties than under drought‐sensitive varieties. The highest GFR occurred under SI combined with mineral fertiliser. The optimisation of maize productivity in SSA will require breeding programmes to consider resource‐efficient practices, including SI and fertiliser microdosing.
- 22 September 2026
- Published by Wiley in Irrigation and Drainage
Enhancing maize ( Zea Mays L.) resilience to climate change: The role of supplemental irrigation and fertiliser microdosing in improving grain‐filling rates of drought‐tolerant varieties in northern Benin
Maize productivity depends on grain‐filling, which requires understanding the interactions among genotype, water and nutrient management. However, these interactions remain poorly investigated in Sub‐Saharan Africa (SSA). This study investigates the influence of supplemental irrigation (SI) and fertiliser microdosing on grain‐filling and yields of maize varieties. Field experiment involved three maize varieties (one drought‐sensitive variety: DMR‐ESR‐W; two drought‐tolerant varieties: TZE‐Y POP STR and 2000Syn EE‐W), two water regimes (rainfed vs. SI) and three fertiliser levels (unfertilised control, microdose: 25 kg N + 4 kg P + 8 kg K ha −1 and recommended: 76 kg N + 13 kg P + 25 kg K ha −1 ). The grain‐filling rate (GFR) reached 70 and 90 g day −1 under the rainfed and SI regimes, respectively. The GFR was higher in drought‐tolerant varieties (90–110 g day −1 ) than in drought‐sensitive varieties (70 g day −1 ). The effective grain‐filling duration and active grain‐filling period were 2 days shorter under SI than under rainfed conditions and 3–5 days shorter under drought‐tolerant varieties than under drought‐sensitive varieties. The highest GFR occurred under SI combined with mineral fertiliser. The optimisation of maize productivity in SSA will require breeding programmes to consider resource‐efficient practices, including SI and fertiliser microdosing.
- Open Access
- 1 January 2026
- Published by Maximum Academic Press in Circular Agricultural Systems
- Vol. 6 (1)
Long-term performance of stage-targeted supplemental irrigation on maize and water productivity under contrasting varieties and fertilization in Parakou, northern Benin
Supplemental irrigation can reduce maize yield losses, but limited water availability and cost require careful targeting of the most responsive growth stages. This study evaluates the long-term maize yield, marginal irrigation water productivity (MIWP), and interannual stability under contrasting management in Parakou, northern Benin. DSSAT CERES-Maize was calibrated and validated using data from a 2-year field experiment in Parakou. Thirty-year simulations (1996–2025) were performed using ERA5 reanalysis weather data to evaluate three maize varieties (DMR-ESR-W, TZE-Y POP STR, and 2000Syn EE-W), three fertilizer levels, and eight water regimes (rainfed, juvenile, flowering–silking, grain-filling, juvenile plus flowering, juvenile plus grain-filling, flowering plus grain-filling, and full season supplemental irrigation). Grain yield and MIWP were 63.9% and 88.2% higher under TZE than DMR. Similarly, grain yield and MIWP were 174.5% and 231.2% higher under the recommended fertilizer rate than the unfertilized control. Grain yield was higher under all the tested supplemental irrigation strategies. Specifically, grain yield was 27.4% higher under flowering–silking stage irrigation than under rainfed conditions. Similarly, MIWP was higher (130.7 kg·ha−1·mm−1) under flowering–silking stage irrigation than under full-season supplemental irrigation (14.2 kg·ha−1·mm−1). However, the lowest interannual instability was recorded under juvenile plus flowering stage irrigation. These findings demonstrate that irrigation timing is more important than maximizing seasonal irrigation amounts. Flowering–silking irrigation is recommended when water productivity is prioritized. These findings can support irrigation scheduling, limited-water allocation, and climate-resilient maize management in northern Benin and comparable environments.
- 1 January 2026
- Published by Maximum Academic Press in Circular Agricultural Systems
- Vol. 6 (1)
Open AccessLong-term performance of stage-targeted supplemental irrigation on maize and water productivity under contrasting varieties and fertilization in Parakou, northern Benin
Supplemental irrigation can reduce maize yield losses, but limited water availability and cost require careful targeting of the most responsive growth stages. This study evaluates the long-term maize yield, marginal irrigation water productivity (MIWP), and interannual stability under contrasting management in Parakou, northern Benin. DSSAT CERES-Maize was calibrated and validated using data from a 2-year field experiment in Parakou. Thirty-year simulations (1996–2025) were performed using ERA5 reanalysis weather data to evaluate three maize varieties (DMR-ESR-W, TZE-Y POP STR, and 2000Syn EE-W), three fertilizer levels, and eight water regimes (rainfed, juvenile, flowering–silking, grain-filling, juvenile plus flowering, juvenile plus grain-filling, flowering plus grain-filling, and full season supplemental irrigation). Grain yield and MIWP were 63.9% and 88.2% higher under TZE than DMR. Similarly, grain yield and MIWP were 174.5% and 231.2% higher under the recommended fertilizer rate than the unfertilized control. Grain yield was higher under all the tested supplemental irrigation strategies. Specifically, grain yield was 27.4% higher under flowering–silking stage irrigation than under rainfed conditions. Similarly, MIWP was higher (130.7 kg·ha−1·mm−1) under flowering–silking stage irrigation than under full-season supplemental irrigation (14.2 kg·ha−1·mm−1). However, the lowest interannual instability was recorded under juvenile plus flowering stage irrigation. These findings demonstrate that irrigation timing is more important than maximizing seasonal irrigation amounts. Flowering–silking irrigation is recommended when water productivity is prioritized. These findings can support irrigation scheduling, limited-water allocation, and climate-resilient maize management in northern Benin and comparable environments.
- Open Access
- 16 December 2025
- Published by International Journal of Biosciences in International Journal of Biosciences (IJB)
- Vol. 27 (6) , 127-135
Effect of flooding depth and harvest intensity on soil moisture dynamics and production of baobab (Adansonia digitata) seedlings
Baobab (Adansonia digitata) is widely used in African drylands for nutrition and income, but its sustainability is threatened by inconsistent natural regeneration and intensive leaf harvesting. This study assessed how flooding depth and harvest intensity influence growth, leave yield, and soil moisture dynamics in baobab seedlings under semi-arid conditions. A randomized complete block design was applied with three flooding depths (10 mm, 20 mm, and 30 mm) and two harvest intensities (25% and 50%) across 84 days after transplanting (DAT). Soil water content (SWC) significantly increased with flooding depth (p < 0.05), with 3 cm irrigation raising SWC by 36.7%, 80.6%, and 71.6% at 21, 64, and 84 DAT, respectively. Seedlings under 50% harvest intensity maintained 16-38% higher SWC than non-defoliated plants at early stages, indicating reduced water use. Plant height and leaf number were significantly influenced by both harvest intensity and flooding depth (p < 0.05); 25% harvest intensity increased height by 15-22% and leaf number by 9-24% compared to controls at early DAT. Seedlings under 3 cm flooding depth showed 11.8% shorter stems and 4.9-17.7% thinner stem diameters relative to 1 cm flooding depth, suggesting potential waterlogging stress. Fresh leaf yield was temporarily higher under 50% harvest intensity (11.9 g/plant) compared to 25% harvest intensity (3.5 g/plant) at 21 DAT, while dry yield remained unaffected, indicating a temporary compensatory growth response. These results suggest that moderate harvest intensity combined with appropriate flooding depth can enhance early seedling performance, but further studies are needed to evaluate long-term sustainability and resilience under fluctuating environmental conditions.
- 16 December 2025
- Published by International Journal of Biosciences in International Journal of Biosciences (IJB)
- Vol. 27 (6) , 127-135
Open AccessEffect of flooding depth and harvest intensity on soil moisture dynamics and production of baobab (Adansonia digitata) seedlings
Baobab (Adansonia digitata) is widely used in African drylands for nutrition and income, but its sustainability is threatened by inconsistent natural regeneration and intensive leaf harvesting. This study assessed how flooding depth and harvest intensity influence growth, leave yield, and soil moisture dynamics in baobab seedlings under semi-arid conditions. A randomized complete block design was applied with three flooding depths (10 mm, 20 mm, and 30 mm) and two harvest intensities (25% and 50%) across 84 days after transplanting (DAT). Soil water content (SWC) significantly increased with flooding depth (p < 0.05), with 3 cm irrigation raising SWC by 36.7%, 80.6%, and 71.6% at 21, 64, and 84 DAT, respectively. Seedlings under 50% harvest intensity maintained 16-38% higher SWC than non-defoliated plants at early stages, indicating reduced water use. Plant height and leaf number were significantly influenced by both harvest intensity and flooding depth (p < 0.05); 25% harvest intensity increased height by 15-22% and leaf number by 9-24% compared to controls at early DAT. Seedlings under 3 cm flooding depth showed 11.8% shorter stems and 4.9-17.7% thinner stem diameters relative to 1 cm flooding depth, suggesting potential waterlogging stress. Fresh leaf yield was temporarily higher under 50% harvest intensity (11.9 g/plant) compared to 25% harvest intensity (3.5 g/plant) at 21 DAT, while dry yield remained unaffected, indicating a temporary compensatory growth response. These results suggest that moderate harvest intensity combined with appropriate flooding depth can enhance early seedling performance, but further studies are needed to evaluate long-term sustainability and resilience under fluctuating environmental conditions.
- Open Access
- 9 December 2025
- Published by MDPI AG in Environmental and Earth Sciences Proceedings
- Vol. 36 (1) , 10
Immediate and Residual Effects of Cattle Corralling and Mineral Fertilizer in Maize Cropping Systems in the Sub-Humid Zone of Northern Benin: Yields, Resource-Use Efficiency, Economic Profitability, and Post-Harvest Soil Fertility
Effective management of organic and inorganic fertilizers is vital for sustaining productivity in intensive cropping systems. This four-year study (2012–2015) assessed the immediate and residual effects of cattle corralling combined with mineral fertilizer on maize in northern Benin using a strip-plot design with five corralling levels No corralling(NM), immediate application (C0) and residual effects one (C1), two (C2), and three (C3) years after the initial corralling and three fertilizer rates F0 (no fertilizer), F1 (50% of the recommended rate) and F2 (the recommended rate). Cattle corralling doubled maize yield from 2.0 to 4.0 t ha−1 and increased net profitability from 384 to 1000 USD ha−1 compared to non-manured plots. Water-use efficiency increased from 3.4 to 6.8 kg ha−1 mm−1, and soil organic carbon increased nearly fourfold (3.0 to 11.2 g kg−1). Residual effects declined over time without mineral inputs (C0 > C1 > C2 > C3 > NM); however, these benefits were sustained or enhanced when combined with fertilizer (C3 > C2 > C1 > C0 > NM). Fertilizer responses were minor in C0 and C1 but significant in C2 and C3, demonstrating a strong organic–inorganic synergy. Nutrient recovery efficiency was initially lower in recently corralled plots but surpassed non-manured levels after two years. These results confirm that integrating livestock corralling with optimized fertilizer use strengthens soil fertility, resource efficiency, and profitability, providing a sustainable intensification pathway for maize systems in sub-humid, low-fertility regions.
- 9 December 2025
- Published by MDPI AG in Environmental and Earth Sciences Proceedings
- Vol. 36 (1) , 10
Open AccessImmediate and Residual Effects of Cattle Corralling and Mineral Fertilizer in Maize Cropping Systems in the Sub-Humid Zone of Northern Benin: Yields, Resource-Use Efficiency, Economic Profitability, and Post-Harvest Soil Fertility
Effective management of organic and inorganic fertilizers is vital for sustaining productivity in intensive cropping systems. This four-year study (2012–2015) assessed the immediate and residual effects of cattle corralling combined with mineral fertilizer on maize in northern Benin using a strip-plot design with five corralling levels No corralling(NM), immediate application (C0) and residual effects one (C1), two (C2), and three (C3) years after the initial corralling and three fertilizer rates F0 (no fertilizer), F1 (50% of the recommended rate) and F2 (the recommended rate). Cattle corralling doubled maize yield from 2.0 to 4.0 t ha−1 and increased net profitability from 384 to 1000 USD ha−1 compared to non-manured plots. Water-use efficiency increased from 3.4 to 6.8 kg ha−1 mm−1, and soil organic carbon increased nearly fourfold (3.0 to 11.2 g kg−1). Residual effects declined over time without mineral inputs (C0 > C1 > C2 > C3 > NM); however, these benefits were sustained or enhanced when combined with fertilizer (C3 > C2 > C1 > C0 > NM). Fertilizer responses were minor in C0 and C1 but significant in C2 and C3, demonstrating a strong organic–inorganic synergy. Nutrient recovery efficiency was initially lower in recently corralled plots but surpassed non-manured levels after two years. These results confirm that integrating livestock corralling with optimized fertilizer use strengthens soil fertility, resource efficiency, and profitability, providing a sustainable intensification pathway for maize systems in sub-humid, low-fertility regions.
- Open Access
- 22 October 2025
- Published by International Journal of Biosciences in International Journal of Biosciences (IJB)
- Vol. 27 (4) , 177-190
Rice productivity and soil hydrodynamic properties under lowland Elaeis guineensis and Borassus aethiopum: An asset rice agroforestry system
Lowlands are facing significant destruction of their natural habitats breaking the interrelationships between soil hydro-physical and installed crops yield parameters. This study investigates the response of rice grain and biomass yields, and soil hydrodynamic properties to Elaeis guineensis and Borassus aethiopum rice cropping systems in lowlands of the commune of Parakou, Northern Benin. We considered four lowlands with 18 trees, viz. nine Elaeis guineensis and nine Borassus aethiopum. The results show that trees crown area, DBH and distance from waterbed were 24.2% higher, and 38.6 and 27.6% lower under Borassus aethiopum compared to Elaeis guineensis, respectively. Soil Ks was lower under Borassus aethiopum than Elaeis guineensis; while soil water content, capillary water holding capacity and capillary porosity were higher. Rice grain and biomass yields were 113.1 and 110.8% higher under Borassus aethiopum compared to Elaeis guineensis. However, no difference in grain and biomass yields occurred between outside and under crowns. Positive correlations were obtained between rice grain yield and harvest index, and between rice biomass yield and trees distance from waterbed. Nonetheless, rice grain yield and trees DBH were negatively correlated. Soil depth and crown indirectly influenced rice biomass yield through a direct effect on root biomass, and the two species also indirectly influenced rice biomass and grain yield through direct positive effect on crown area. The findings show that the presence of Elaeis guineensis and Borassus aethiopum trees in rice cropping agroforestry systems can help for their protection and improve the ecosystems and yield of rice cropping agroforestry systems.
- 22 October 2025
- Published by International Journal of Biosciences in International Journal of Biosciences (IJB)
- Vol. 27 (4) , 177-190
Open AccessRice productivity and soil hydrodynamic properties under lowland Elaeis guineensis and Borassus aethiopum: An asset rice agroforestry system
Lowlands are facing significant destruction of their natural habitats breaking the interrelationships between soil hydro-physical and installed crops yield parameters. This study investigates the response of rice grain and biomass yields, and soil hydrodynamic properties to Elaeis guineensis and Borassus aethiopum rice cropping systems in lowlands of the commune of Parakou, Northern Benin. We considered four lowlands with 18 trees, viz. nine Elaeis guineensis and nine Borassus aethiopum. The results show that trees crown area, DBH and distance from waterbed were 24.2% higher, and 38.6 and 27.6% lower under Borassus aethiopum compared to Elaeis guineensis, respectively. Soil Ks was lower under Borassus aethiopum than Elaeis guineensis; while soil water content, capillary water holding capacity and capillary porosity were higher. Rice grain and biomass yields were 113.1 and 110.8% higher under Borassus aethiopum compared to Elaeis guineensis. However, no difference in grain and biomass yields occurred between outside and under crowns. Positive correlations were obtained between rice grain yield and harvest index, and between rice biomass yield and trees distance from waterbed. Nonetheless, rice grain yield and trees DBH were negatively correlated. Soil depth and crown indirectly influenced rice biomass yield through a direct effect on root biomass, and the two species also indirectly influenced rice biomass and grain yield through direct positive effect on crown area. The findings show that the presence of Elaeis guineensis and Borassus aethiopum trees in rice cropping agroforestry systems can help for their protection and improve the ecosystems and yield of rice cropping agroforestry systems.
- 2 September 2025
- Published by Springer Nature in Nutrient Cycling in Agroecosystems
- Vol. 131 (3) , 403-423
Soil fertility, maize productivity, and nutrient use efficiency following different cattle corralling duration and mineral fertilizer application on a Lixisol in Benin
- 2 September 2025
- Published by Springer Nature in Nutrient Cycling in Agroecosystems
- Vol. 131 (3) , 403-423
Soil fertility, maize productivity, and nutrient use efficiency following different cattle corralling duration and mineral fertilizer application on a Lixisol in Benin
- Open Access
- 30 November 2020
- Published by Skies Educational in Applied Research Journal of Environmental Engineering
- Vol. 3 (2) , 1-12
Draught Requirements of Tillage Tines in Clay Soil under Indoor Soil Bin Conditions
Large tine (Tl) and sweep tine (Tw) were the different model tillage tines used for this research. The blades were used on clay soil in a soil bin of dimension 9.0 × 0.85 × 0.5m located in the Department of Agricultural Engineering of the Federal University of Technology, Akure, Nigeria. The clay soil used for the experiment was obtained from Agricultural Engineering Step B Farm. The objective of this study was to evaluate the draught requirements of the model tillage tools and to evaluate and model the parameters of the soil profile produced under different operating conditions. It involved testing and evaluation of tool shape, depth (12.5 -100mm) and rake angles (300, 450, and 900) and forward speed (0.17m/sec) on draught force. Soil profile patterns measured by a profilometer was analyzed using the following parameters – maximum Width of soil cut (Wfs), Ridge-to- Ridge Distance (RRD), furrow depth (df), height of ridge (Hr), maximum Width of Soil Throw (TDW) and tool width (w). Results showed that draught is directly proportional to the depth of the tine at a certain rake angle. The Tw had the least draught while Tl had the highest draught. Analysis of soil disturbance parameters revealed an increase in parameters with increasing cone index and depth of the tines. The study provides relevant data in the design of soil engaging tools and sustainable crop production. Keywords: Draught, Clay, Soil disturbance, Tillage, Tines.
- 30 November 2020
- Published by Skies Educational in Applied Research Journal of Environmental Engineering
- Vol. 3 (2) , 1-12
Open AccessDraught Requirements of Tillage Tines in Clay Soil under Indoor Soil Bin Conditions
Large tine (Tl) and sweep tine (Tw) were the different model tillage tines used for this research. The blades were used on clay soil in a soil bin of dimension 9.0 × 0.85 × 0.5m located in the Department of Agricultural Engineering of the Federal University of Technology, Akure, Nigeria. The clay soil used for the experiment was obtained from Agricultural Engineering Step B Farm. The objective of this study was to evaluate the draught requirements of the model tillage tools and to evaluate and model the parameters of the soil profile produced under different operating conditions. It involved testing and evaluation of tool shape, depth (12.5 -100mm) and rake angles (300, 450, and 900) and forward speed (0.17m/sec) on draught force. Soil profile patterns measured by a profilometer was analyzed using the following parameters – maximum Width of soil cut (Wfs), Ridge-to- Ridge Distance (RRD), furrow depth (df), height of ridge (Hr), maximum Width of Soil Throw (TDW) and tool width (w). Results showed that draught is directly proportional to the depth of the tine at a certain rake angle. The Tw had the least draught while Tl had the highest draught. Analysis of soil disturbance parameters revealed an increase in parameters with increasing cone index and depth of the tines. The study provides relevant data in the design of soil engaging tools and sustainable crop production. Keywords: Draught, Clay, Soil disturbance, Tillage, Tines.