Zhihua Shen
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Zhihua Shen has a total of 18 co-authors. Here are the top co-authors by number of shared publications:
- Xiao Wang
School of Electronic Information and Artificial Intelligence, Shaanxi University of Science and Technology, Xian, China
8 shared publications - Bin Ge
Electronic Information Engineering College, Nantong Vocational University, Nantong 226007, China
6 shared publications - Shengli Wu
Key Laboratory for Physical Electronics and Devices of the Ministry of Education, School of Electronic Science and Engineering, Xi'an Jiaotong University, Xi'an 710049, China
6 shared publications - Jinshou Tian
State Key Laboratory of Ultrafast Optical Science and Technology, Xi’an Institute of Optics and Precision Mechanics (XIOPM), Chinese Academy of Sciences (CAS), Xi’an 710119, China
3 shared publications Qiaoning Li
School of Electronics and Information Engineering, Nantong Vocational University 1 , Nantong 226007
3 shared publications- Min Zhu
School of Electronic Information Engineering, Nantong Vocational University, Nantong, China
2 shared publications
Latest Publications
- Open Access
- 1 January 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Access
- Vol. 14, 118769-118778
CFCW-YOLO: Collaborative Optimization of Feature Enhancement and Lightweight Design for Pedestrian Object Detection Models
- 1 January 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Access
- Vol. 14, 118769-118778
Open AccessCFCW-YOLO: Collaborative Optimization of Feature Enhancement and Lightweight Design for Pedestrian Object Detection Models
- 13 June 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Geoscience and Remote Sensing Letters
- Vol. 22 (1545598X) , 1-5
Compensating Spatial Degradation in HSI Classification: A Polarity Transformer With LBP-Guided Feature Learning
Hyperspectral images (HSI) classification is inherently challenged by the degraded spatial information in complex scenarios, where existing feature extraction methods fail to realize the consistent compensation from spectral to spatial information. To address this, we propose a novel framework that integrates Local Binary Patterns (LBP) for texture-guided spatial enhancement and a Polarity Transformer to model complementary feature representations. The key innovation lies in decomposing the input features into polarity mask through the LBP texture guidance. The positive polarity emphasizes dominant spectral-spatial correlations, while the negative suppresses noise and redundant responses, jointly enabling adaptive compensation of lost spatial details. Simultaneously, multi-scale LBP operators are embedded prior to the Transformer to explicitly encode rotation-invariant texture features. The original HSI data and LBP-enhanced features are processed by polarity Transformers and fused through a cross-polarity interaction module, ensuring the complementary advantages of global spectral context and local texture details. Experimental results on widely-used HSI datasets demonstrate that our method achieves superior classification performance compared to state-of-the-art approaches, particularly in low-resolution conditions.
- 13 June 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Geoscience and Remote Sensing Letters
- Vol. 22 (1545598X) , 1-5
Compensating Spatial Degradation in HSI Classification: A Polarity Transformer With LBP-Guided Feature Learning
Hyperspectral images (HSI) classification is inherently challenged by the degraded spatial information in complex scenarios, where existing feature extraction methods fail to realize the consistent compensation from spectral to spatial information. To address this, we propose a novel framework that integrates Local Binary Patterns (LBP) for texture-guided spatial enhancement and a Polarity Transformer to model complementary feature representations. The key innovation lies in decomposing the input features into polarity mask through the LBP texture guidance. The positive polarity emphasizes dominant spectral-spatial correlations, while the negative suppresses noise and redundant responses, jointly enabling adaptive compensation of lost spatial details. Simultaneously, multi-scale LBP operators are embedded prior to the Transformer to explicitly encode rotation-invariant texture features. The original HSI data and LBP-enhanced features are processed by polarity Transformers and fused through a cross-polarity interaction module, ensuring the complementary advantages of global spectral context and local texture details. Experimental results on widely-used HSI datasets demonstrate that our method achieves superior classification performance compared to state-of-the-art approaches, particularly in low-resolution conditions.
- 31 March 2025
- Published by American Vacuum Society in Journal of Vacuum Science & Technology B
- Vol. 43 (3)
Synergistic regulation of device performance by structural parameters of vertical side-gate type vacuum channel field emission transistor
A novel type vacuum channel triode with vertical side-gate structure was designed and systematically simulated to address the limitations of conventional vertical structures. This unique side-gate structure divides the whole system into two independent parts connected by a vacuum channel, which were composed of two parts: gate-oxide layer-drain and source-oxide layer-drain, addressing the dilemmas of the gate dielectric layer breakdown and leakage current increase caused by the decrease of the gate oxide layer in traditional vertical structures. The electrical properties of the vertical side-gate structure with different gate oxide layer thicknesses h2, source oxide layer thickness h22, gate thickness h3, and vacuum channel width W′ were systematically simulated. The physical mechanism of gate control and the intrinsic factor of parameter optimization to improve the performance of the device were investigated. The vertical vacuum transistor with a switching current ratio of 103, strong gate control capability, and low gate leakage current was obtained through the cooperative optimization of various structural parameters. This vertical side-gate structure provides a new perspective and key support for the design of high performance vacuum electronic devices.
- 31 March 2025
- Published by American Vacuum Society in Journal of Vacuum Science & Technology B
- Vol. 43 (3)
Synergistic regulation of device performance by structural parameters of vertical side-gate type vacuum channel field emission transistor
A novel type vacuum channel triode with vertical side-gate structure was designed and systematically simulated to address the limitations of conventional vertical structures. This unique side-gate structure divides the whole system into two independent parts connected by a vacuum channel, which were composed of two parts: gate-oxide layer-drain and source-oxide layer-drain, addressing the dilemmas of the gate dielectric layer breakdown and leakage current increase caused by the decrease of the gate oxide layer in traditional vertical structures. The electrical properties of the vertical side-gate structure with different gate oxide layer thicknesses h2, source oxide layer thickness h22, gate thickness h3, and vacuum channel width W′ were systematically simulated. The physical mechanism of gate control and the intrinsic factor of parameter optimization to improve the performance of the device were investigated. The vertical vacuum transistor with a switching current ratio of 103, strong gate control capability, and low gate leakage current was obtained through the cooperative optimization of various structural parameters. This vertical side-gate structure provides a new perspective and key support for the design of high performance vacuum electronic devices.
- 27 February 2025
- Published by American Vacuum Society in Journal of Vacuum Science & Technology B
- Vol. 43 (2)
Optimal structural design of nanoscale dual-gate air-channel triode via 3D simulation
A nanoscale air-channel triode with dual-gate structure was proposed and systematically simulated. The simulation results indicate that with an increase in the gate width, the transconductance of the device initially rises before reaching saturation. Moreover, a thinner gate insulation layer enhances the gate’s ability to modulate current in the channel. When the gate size sufficiently covers the air channel, a decrease in the gate width leads to a higher cutoff frequency of the device. Furthermore, the top and bottom gate structures with unequal dimensions are advantageous for enhancing the device cutoff frequency, particularly when the top gate width exceeds the channel length, while the bottom gate width is narrower. This configuration not only facilitates radiation isolation of the air channel beneath the top gate but also contributes to an improved cutoff frequency.
- 27 February 2025
- Published by American Vacuum Society in Journal of Vacuum Science & Technology B
- Vol. 43 (2)
Optimal structural design of nanoscale dual-gate air-channel triode via 3D simulation
A nanoscale air-channel triode with dual-gate structure was proposed and systematically simulated. The simulation results indicate that with an increase in the gate width, the transconductance of the device initially rises before reaching saturation. Moreover, a thinner gate insulation layer enhances the gate’s ability to modulate current in the channel. When the gate size sufficiently covers the air channel, a decrease in the gate width leads to a higher cutoff frequency of the device. Furthermore, the top and bottom gate structures with unequal dimensions are advantageous for enhancing the device cutoff frequency, particularly when the top gate width exceeds the channel length, while the bottom gate width is narrower. This configuration not only facilitates radiation isolation of the air channel beneath the top gate but also contributes to an improved cutoff frequency.
- 29 August 2024
- Published by American Vacuum Society in Journal of Vacuum Science & Technology B
- Vol. 42 (5)
Radio frequency side-gate nanoscale vacuum channel triode
Nanoscale vacuum semiconductor devices utilize vacuum as an electron transport medium, offering the advantages of rapid response and immunity to extreme environments. In this study, we present a nanoscale vertical channel vacuum triode with a side-gate structure. The device employs vacuum as the gate insulating medium, which enhances its reliability compared to conventional vertical structure vacuum triodes. Furthermore, the side-gate design reduces the gate input capacitance to approximately 10−18 F, making it more suitable for high-frequency operations. We systematically investigate the impact of structural dimensions on device performance. Simulation results demonstrate that when the dielectric layer thickness is around 35 nm, the maximum transconductance of the device reaches 1.23 μS. Increasing the gate dielectric layer thickness leads to an increase in cut-off frequency but decreases channel current. Smaller gap widths between the cathode and gate result in higher transconductance and cut-off frequencies. However, when the gap width is less than 40 nm, noticeable gate leakage currents occur. Introducing negative offset of alignment between the anode and channel edge enhances transconductance and cut-off frequency but may introduce stability issues. These research findings provide valuable insights for developing high-frequency vacuum triode devices.
- 29 August 2024
- Published by American Vacuum Society in Journal of Vacuum Science & Technology B
- Vol. 42 (5)
Radio frequency side-gate nanoscale vacuum channel triode
Nanoscale vacuum semiconductor devices utilize vacuum as an electron transport medium, offering the advantages of rapid response and immunity to extreme environments. In this study, we present a nanoscale vertical channel vacuum triode with a side-gate structure. The device employs vacuum as the gate insulating medium, which enhances its reliability compared to conventional vertical structure vacuum triodes. Furthermore, the side-gate design reduces the gate input capacitance to approximately 10−18 F, making it more suitable for high-frequency operations. We systematically investigate the impact of structural dimensions on device performance. Simulation results demonstrate that when the dielectric layer thickness is around 35 nm, the maximum transconductance of the device reaches 1.23 μS. Increasing the gate dielectric layer thickness leads to an increase in cut-off frequency but decreases channel current. Smaller gap widths between the cathode and gate result in higher transconductance and cut-off frequencies. However, when the gap width is less than 40 nm, noticeable gate leakage currents occur. Introducing negative offset of alignment between the anode and channel edge enhances transconductance and cut-off frequency but may introduce stability issues. These research findings provide valuable insights for developing high-frequency vacuum triode devices.
- Open Access
Symmetric Color Image Encryption Using a Novel Cross–Plane Joint Scrambling–Diffusion Method
Motivated by the pursuit of both encryption efficiency and security, this paper presents a symmetric color image encryption algorithm using a novel cross–plane joint scrambling–diffusion method. To provide high–strength security, the color planes are firstly spliced horizontally and then vertically to be adequately encrypted by the joint scrambling–diffusion method. Therefore, minor changes in any pixel can cross every color plane that significantly influences the final cipher image. To achieve fast encryption speed, all employed chaotic systems have simple structures but robust properties to rapidly generate high–quality pseudorandom sequences. Additionally, the joint scrambling–diffusion method is vectorized to handle pixels in parallel for satisfactory execution efficiency. Security tests demonstrate the outstanding security performance of the proposed algorithm, with correlation coefficients and entropies of cipher images being close to 0 and greater than 7.99, respectively, and results of NPCR and UACI tests being similar to ideal cipher images, which can resist statistical, differential, exhaustive, and even chosen ciphertext/plaintext attacks. Moreover, because of the O(4W + 4H) time complexity of the novel scrambling–diffusion method, even a color image with a size of 1024 × 1024 only costs 0.26 s to be encrypted. Hence, the proposed algorithm can satisfy the efficiency and security requirements of color image encryption.
Open AccessSymmetric Color Image Encryption Using a Novel Cross–Plane Joint Scrambling–Diffusion Method
Motivated by the pursuit of both encryption efficiency and security, this paper presents a symmetric color image encryption algorithm using a novel cross–plane joint scrambling–diffusion method. To provide high–strength security, the color planes are firstly spliced horizontally and then vertically to be adequately encrypted by the joint scrambling–diffusion method. Therefore, minor changes in any pixel can cross every color plane that significantly influences the final cipher image. To achieve fast encryption speed, all employed chaotic systems have simple structures but robust properties to rapidly generate high–quality pseudorandom sequences. Additionally, the joint scrambling–diffusion method is vectorized to handle pixels in parallel for satisfactory execution efficiency. Security tests demonstrate the outstanding security performance of the proposed algorithm, with correlation coefficients and entropies of cipher images being close to 0 and greater than 7.99, respectively, and results of NPCR and UACI tests being similar to ideal cipher images, which can resist statistical, differential, exhaustive, and even chosen ciphertext/plaintext attacks. Moreover, because of the O(4W + 4H) time complexity of the novel scrambling–diffusion method, even a color image with a size of 1024 × 1024 only costs 0.26 s to be encrypted. Hence, the proposed algorithm can satisfy the efficiency and security requirements of color image encryption.
- Open Access
- 1 July 2023
- Published by American Vacuum Society in Journal of Vacuum Science & Technology B
- Vol. 41 (4)
Simulation of a multichannel vacuum transistor with high cut-off frequency
A multichannel vertical vacuum transistor based on the Fowler–Nordheim tunneling emission mechanism was proposed and numerically investigated. The multichannel structure was demonstrated to be effective in enhancing the drain current when compared to the traditional single-channel structure with the same device size. For example, transconductance increased from 0.42 mS of the single-channel structure to 0.86 mS of the four-channel structure. In addition, when the vacuum channel number increases, the size of a single channel decreases correspondingly, leading to a reduction in electric field intensity on the electron emission surface. Thus, the off-state current dramatically reduced by two orders of magnitude reaching10−15 A according to the simulated results. In other words, the ON/OFF drain current ratio of the multichannel structure is significantly enhanced. Furthermore, the simulation results indicate that the cut-off frequency of the multichannel device is 33% higher than that of the traditional single-channel one reaching 0.19 THz.
- 1 July 2023
- Published by American Vacuum Society in Journal of Vacuum Science & Technology B
- Vol. 41 (4)
Open AccessSimulation of a multichannel vacuum transistor with high cut-off frequency
A multichannel vertical vacuum transistor based on the Fowler–Nordheim tunneling emission mechanism was proposed and numerically investigated. The multichannel structure was demonstrated to be effective in enhancing the drain current when compared to the traditional single-channel structure with the same device size. For example, transconductance increased from 0.42 mS of the single-channel structure to 0.86 mS of the four-channel structure. In addition, when the vacuum channel number increases, the size of a single channel decreases correspondingly, leading to a reduction in electric field intensity on the electron emission surface. Thus, the off-state current dramatically reduced by two orders of magnitude reaching10−15 A according to the simulated results. In other words, the ON/OFF drain current ratio of the multichannel structure is significantly enhanced. Furthermore, the simulation results indicate that the cut-off frequency of the multichannel device is 33% higher than that of the traditional single-channel one reaching 0.19 THz.
- 8 February 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Electron Devices
- Vol. 70 (4) , 1894-1897
Air Channel Space-Charge-Limited Transistor
A vertical structural air channel transistor with a gate block dielectric layer, which can isolate gate from air channel, was proposed. With the presence of gate block dielectric layer, electrons at the edge of the 2-D electron system (2-DES) formed at gate are prevented to be injected into air channel, which may effectively minish the gate leakage current compared to the conventional vertical structure. The transistor operates in the space-charge-limited (SCL) regime of thermionic emission, which makes it theoretically possess the advantages of high-temperature reliability and low power consumption. Simulation results indicate that this transistor can achieve transconductance of 34.2 $\mu $ S and cutoff frequency of 88.2 GHz by optimizing the dimensional parameters.
- 8 February 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Electron Devices
- Vol. 70 (4) , 1894-1897
Air Channel Space-Charge-Limited Transistor
A vertical structural air channel transistor with a gate block dielectric layer, which can isolate gate from air channel, was proposed. With the presence of gate block dielectric layer, electrons at the edge of the 2-D electron system (2-DES) formed at gate are prevented to be injected into air channel, which may effectively minish the gate leakage current compared to the conventional vertical structure. The transistor operates in the space-charge-limited (SCL) regime of thermionic emission, which makes it theoretically possess the advantages of high-temperature reliability and low power consumption. Simulation results indicate that this transistor can achieve transconductance of 34.2 $\mu $ S and cutoff frequency of 88.2 GHz by optimizing the dimensional parameters.
- Open Access
- 10 February 2022
- Published by MDPI AG in Micromachines
- Vol. 13 (2) , 286
A High-Sensitivity Vacuum Diode Temperature Sensor Based on Barrier-Lowering Effect
A new kind of temperature sensor based on a vacuum diode was proposed and numerically studied in this paper. This device operated under different electron emission mechanisms according to the electron density in the vacuum channel. The temperature determination ability of this device was only empowered when working in the electric-field-assisted thermionic emission regime (barrier-lowering effect). The simulated results indicated that the temperature-sensing range of this device was around 273 K–325 K with a supply current of 1 μA. To obtain a linear dependency of voltage on temperature, we designed a proportional-to-absolute-temperature (PTAT) circuit. The mathematic derivation of the PTAT voltage is presented in this study. The temperature-sensing sensitivity was calculated as 7.6 mV/K according to the measured I-U (current versus voltage) characteristic. The structure and principle of the device presented in this paper might provide an alternative method for the study of temperature sensors.
- 10 February 2022
- Published by MDPI AG in Micromachines
- Vol. 13 (2) , 286
Open AccessA High-Sensitivity Vacuum Diode Temperature Sensor Based on Barrier-Lowering Effect
A new kind of temperature sensor based on a vacuum diode was proposed and numerically studied in this paper. This device operated under different electron emission mechanisms according to the electron density in the vacuum channel. The temperature determination ability of this device was only empowered when working in the electric-field-assisted thermionic emission regime (barrier-lowering effect). The simulated results indicated that the temperature-sensing range of this device was around 273 K–325 K with a supply current of 1 μA. To obtain a linear dependency of voltage on temperature, we designed a proportional-to-absolute-temperature (PTAT) circuit. The mathematic derivation of the PTAT voltage is presented in this study. The temperature-sensing sensitivity was calculated as 7.6 mV/K according to the measured I-U (current versus voltage) characteristic. The structure and principle of the device presented in this paper might provide an alternative method for the study of temperature sensors.
- Open Access
- 22 June 2021
- Published by MDPI AG in Micromachines
- Vol. 12 (7) , 729
Nanoscale Vacuum Diode Based on Thermionic Emission for High Temperature Operation
Vacuum diodes, based on field emission mechanisms, demonstrate a superior performance in high-temperature operations compared to solid-state devices. However, when considering low operating voltage and continuous miniaturization, the cathode is usually made into a tip structure and the gap between cathode and anode is reduced to a nanoscale. This greatly increases the difficulty of preparation and makes it difficult to ensure fabrication consistency. Here, a metal-insulator-semiconductor (MIS) structural nanoscale vacuum diode, based on thermionic emission, was numerically studied. The results indicate that this device can operate at a stable level in a wide range of temperatures, at around 600 degrees Kelvin above 260 K at 0.2 V voltage bias. Moreover, unlike the conventional vacuum diodes working in field emission regime where the emission current is extremely sensitive to the gap-width between the cathode and the anode, the emission current of the proposed diode shows a weak correlation to the gap-width. These features make this diode a promising alternative to vacuum electronics for large-scale production and harsh environmental applications.
- 22 June 2021
- Published by MDPI AG in Micromachines
- Vol. 12 (7) , 729
Open AccessNanoscale Vacuum Diode Based on Thermionic Emission for High Temperature Operation
Vacuum diodes, based on field emission mechanisms, demonstrate a superior performance in high-temperature operations compared to solid-state devices. However, when considering low operating voltage and continuous miniaturization, the cathode is usually made into a tip structure and the gap between cathode and anode is reduced to a nanoscale. This greatly increases the difficulty of preparation and makes it difficult to ensure fabrication consistency. Here, a metal-insulator-semiconductor (MIS) structural nanoscale vacuum diode, based on thermionic emission, was numerically studied. The results indicate that this device can operate at a stable level in a wide range of temperatures, at around 600 degrees Kelvin above 260 K at 0.2 V voltage bias. Moreover, unlike the conventional vacuum diodes working in field emission regime where the emission current is extremely sensitive to the gap-width between the cathode and the anode, the emission current of the proposed diode shows a weak correlation to the gap-width. These features make this diode a promising alternative to vacuum electronics for large-scale production and harsh environmental applications.