Timileyin David Oyedeji
Timileyin David Oyedeji has a total of 27 co-authors. Here are the top co-authors by number of shared publications:
- Bai-Xiang Xu
Mechanics of Functional Materials Division, Institute of Materials Science, Technische Universität Darmstadt, Darmstadt, Germany
8 shared publications - Yangyiwei Yang
Mechanics of Functional Materials Division Institute of Materials Science Technische Universität Darmstadt 64287 Darmstadt Germany
8 shared publications - Bilal Gökce
Chair of Materials Science and Additive Manufacturing, School of Mechanical Engineering and Safety Engineering, University of Wuppertal, Wuppertal, Germany
3 shared publications - Aaron Brunk
Institute of Mathematics, Johannes Gutenberg-University, Mainz, Germany
2 shared publications - Herbert Egger
Johannes Kepler University Linz
2 shared publications Mareen Goßling
Chair of Materials Science and Additive Manufacturing School of Mechanical Engineering and Safety Engineering University of Wuppertal Gaußstraße 20 42119 Wuppertal Germany
2 shared publications
Latest Publications
- Open Access
- 26 May 2025
- Published by Wiley in Advanced Engineering Materials
- Vol. 27 (14)
Laser Additive Manufacturing of Oxide‐Dispersion‐Strengthened Steels: A Simulation‐Based Comparison Between Powder Bed Fusion and Direct Energy Deposition
Oxide‐dispersion‐strengthened steels, characterized by oxide nanoparticles dispersed in a metallic matrix, exhibit high strength at elevated temperatures. Controlling the size and distribution of these dispersoids is crucial for achieving desired properties. Using multiphysics phase‐field simulation and associated nanoparticle tracing, this work investigates the thermo‐microstructural evolution, melt flow, and nanoparticle dispersion and agglomeration of the manufactured Fe20Cr alloy with 0.5 (wt%) ZrO2 nanoparticle by powder bed fusion (PBF) and direct energy deposition (DED) processes. Results present evident differences in melt residence time and flow patterns between DED and PBF. Dispersion and agglomeration are influenced by their positioning relative to the melt pool geometry. Regions closer to the beam spot center experience longer melt residence times, leading to a higher degree of dispersion, greater interparticle distances, and lower estimated Orowan stress. For the same volumetric energy density, simulations indicate that DED supports better nanoparticle dispersion due to the larger melt pool and consistent flow patterns, distinguished from the erratic melt dynamics in PBF, leading to greater nanoparticle agglomeration. Higher Orowan stress is resolved in the sample by DED as compared to that by PBF.
- 26 May 2025
- Published by Wiley in Advanced Engineering Materials
- Vol. 27 (14)
Open AccessLaser Additive Manufacturing of Oxide‐Dispersion‐Strengthened Steels: A Simulation‐Based Comparison Between Powder Bed Fusion and Direct Energy Deposition
Oxide‐dispersion‐strengthened steels, characterized by oxide nanoparticles dispersed in a metallic matrix, exhibit high strength at elevated temperatures. Controlling the size and distribution of these dispersoids is crucial for achieving desired properties. Using multiphysics phase‐field simulation and associated nanoparticle tracing, this work investigates the thermo‐microstructural evolution, melt flow, and nanoparticle dispersion and agglomeration of the manufactured Fe20Cr alloy with 0.5 (wt%) ZrO2 nanoparticle by powder bed fusion (PBF) and direct energy deposition (DED) processes. Results present evident differences in melt residence time and flow patterns between DED and PBF. Dispersion and agglomeration are influenced by their positioning relative to the melt pool geometry. Regions closer to the beam spot center experience longer melt residence times, leading to a higher degree of dispersion, greater interparticle distances, and lower estimated Orowan stress. For the same volumetric energy density, simulations indicate that DED supports better nanoparticle dispersion due to the larger melt pool and consistent flow patterns, distinguished from the erratic melt dynamics in PBF, leading to greater nanoparticle agglomeration. Higher Orowan stress is resolved in the sample by DED as compared to that by PBF.
- 3 September 2024
- Published by Walter de Gruyter GmbH in Computational Methods in Applied Mathematics
- Vol. 25 (2) , 373-396
Variational Approximation for a Non-Isothermal Coupled Phase-Field System: Structure-Preservation & Nonlinear Stability
A Cahn–Hilliard–Allen–Cahn phase-field model coupled with a heat transfer equation, particularly with full non-diagonal mobility matrices, is studied. After reformulating the problem with respect to the inverse of temperature, we proposed and analysed a structure-preserving approximation for the semi-discretisation in space and then a fully discrete approximation using conforming finite elements and time-stepping methods. We prove structure-preserving property and discrete stability using relative entropy methods for the semi-discrete and fully discrete case. The theoretical results are illustrated by numerical experiments.
- 3 September 2024
- Published by Walter de Gruyter GmbH in Computational Methods in Applied Mathematics
- Vol. 25 (2) , 373-396
Variational Approximation for a Non-Isothermal Coupled Phase-Field System: Structure-Preservation & Nonlinear Stability
A Cahn–Hilliard–Allen–Cahn phase-field model coupled with a heat transfer equation, particularly with full non-diagonal mobility matrices, is studied. After reformulating the problem with respect to the inverse of temperature, we proposed and analysed a structure-preserving approximation for the semi-discretisation in space and then a fully discrete approximation using conforming finite elements and time-stepping methods. We prove structure-preserving property and discrete stability using relative entropy methods for the semi-discrete and fully discrete case. The theoretical results are illustrated by numerical experiments.
- Open Access
On existence, uniqueness and stability of solutions to Cahn-Hilliard/Allen-Cahn systems with cross-kinetic coupling
A system of phase-field equations with strong-coupling through state and gradient dependent non-diagonal mobility matrices is studied. Existence of weak solutions is established by the Galerkin approximation and a-priori estimates in strong norms. Relative energy estimates are used to derive a general nonlinear stability estimate. As a consequence, a weak-strong uniqueness principle is obtained and stability with respect to model parameters is investigated.
Open AccessOn existence, uniqueness and stability of solutions to Cahn-Hilliard/Allen-Cahn systems with cross-kinetic coupling
A system of phase-field equations with strong-coupling through state and gradient dependent non-diagonal mobility matrices is studied. Existence of weak solutions is established by the Galerkin approximation and a-priori estimates in strong norms. Relative energy estimates are used to derive a general nonlinear stability estimate. As a consequence, a weak-strong uniqueness principle is obtained and stability with respect to model parameters is investigated.
- Open Access
Variational quantitative phase-field modeling of nonisothermal sintering process
In this work, we present a variational and quantitative phase-field model for non-isothermal sintering processes. The model is derived via an extended non-diagonal phase-field model. The model evolution equations have naturally cross-coupling terms between the conserved kinetics (i.e., mass and thermal transfer) and the non-conserved one (grain growth). These terms are shown via asymptotic analysis to be instrumental in ensuring the elimination of interface artefacts, while also examined to not modify the thermodynamic equilibrium condition (characterized by dihedral angle). Moreover, we demonstrate that the trapping effects and existence of surface diffusion in conservation laws are direction-dependent. An anisotropic interpolation scheme of the kinetic mobilities which differentiates the normal and the tangential directions along the interface is discussed. Numerically, we demonstrate the importance of the cross-couplings and the anisotropic interpolation via presenting thermal-microstructural evolutions.
Open AccessVariational quantitative phase-field modeling of nonisothermal sintering process
In this work, we present a variational and quantitative phase-field model for non-isothermal sintering processes. The model is derived via an extended non-diagonal phase-field model. The model evolution equations have naturally cross-coupling terms between the conserved kinetics (i.e., mass and thermal transfer) and the non-conserved one (grain growth). These terms are shown via asymptotic analysis to be instrumental in ensuring the elimination of interface artefacts, while also examined to not modify the thermodynamic equilibrium condition (characterized by dihedral angle). Moreover, we demonstrate that the trapping effects and existence of surface diffusion in conservation laws are direction-dependent. An anisotropic interpolation scheme of the kinetic mobilities which differentiates the normal and the tangential directions along the interface is discussed. Numerically, we demonstrate the importance of the cross-couplings and the anisotropic interpolation via presenting thermal-microstructural evolutions.
- 4 August 2023
- Published by American Physical Society (APS) in Physical Review E
- Vol. 108 (2) , 025301
Variational quantitative phase-field modeling of nonisothermal sintering process
Phase-field modeling has become a powerful tool in describing the complex pore-structure evolution and the intricate multiphysics in nonisothermal sintering processes. However, the quantitative validity of conventional variational phase-field models involving diffusive processes is a challenge. Artificial interface effects, like the trapping effects, may originate at the interface when the kinetic properties of two opposing phases are different. On the other hand, models with prescribed antitrapping terms do not necessarily guarantee the thermodynamics variational nature of the model. This issue has been solved for liquid-solid interfaces via the development of the variational quantitative solidification phase-field model. However, there is no related work addressing the interfaces in nonisothermal sintering, where the free surfaces between the solid phase and surrounding pore regions exhibit strong asymmetry of mass and thermal properties. Also, additional challenges arise due to the conserved order parameter describing the free surfaces. In this work, we present a variational and quantitative phase-field model for nonisothermal sintering processes. The model is derived via an extended nondiagonal phase-field model. The model evolution equations have naturally cross-coupling terms between the conserved kinetics (i.e., mass and thermal transfer) and the nonconserved one (grain growth). These terms are shown via asymptotic analysis to be instrumental in ensuring the elimination of interface artifacts, while also examined to not modify the thermodynamic equilibrium condition (characterized by a dihedral angle). Moreover, we demonstrate that the trapping effects and the existence of surface diffusion in conservation laws are direction-dependent. An anisotropic interpolation scheme of the kinetic mobilities that differentiates between the normal and tangential directions along the interface is discussed. Numerically, we demonstrate the importance of the cross-couplings and the anisotropic interpolation by presenting thermal-microstructural evolutions.
- 4 August 2023
- Published by American Physical Society (APS) in Physical Review E
- Vol. 108 (2) , 025301
Variational quantitative phase-field modeling of nonisothermal sintering process
Phase-field modeling has become a powerful tool in describing the complex pore-structure evolution and the intricate multiphysics in nonisothermal sintering processes. However, the quantitative validity of conventional variational phase-field models involving diffusive processes is a challenge. Artificial interface effects, like the trapping effects, may originate at the interface when the kinetic properties of two opposing phases are different. On the other hand, models with prescribed antitrapping terms do not necessarily guarantee the thermodynamics variational nature of the model. This issue has been solved for liquid-solid interfaces via the development of the variational quantitative solidification phase-field model. However, there is no related work addressing the interfaces in nonisothermal sintering, where the free surfaces between the solid phase and surrounding pore regions exhibit strong asymmetry of mass and thermal properties. Also, additional challenges arise due to the conserved order parameter describing the free surfaces. In this work, we present a variational and quantitative phase-field model for nonisothermal sintering processes. The model is derived via an extended nondiagonal phase-field model. The model evolution equations have naturally cross-coupling terms between the conserved kinetics (i.e., mass and thermal transfer) and the nonconserved one (grain growth). These terms are shown via asymptotic analysis to be instrumental in ensuring the elimination of interface artifacts, while also examined to not modify the thermodynamic equilibrium condition (characterized by a dihedral angle). Moreover, we demonstrate that the trapping effects and the existence of surface diffusion in conservation laws are direction-dependent. An anisotropic interpolation scheme of the kinetic mobilities that differentiates between the normal and tangential directions along the interface is discussed. Numerically, we demonstrate the importance of the cross-couplings and the anisotropic interpolation by presenting thermal-microstructural evolutions.
- Open Access
- 5 May 2023
- Published by American Chemical Society (ACS) in ChemRxiv
Influence of silver nanoparticle additivation on Nd-Fe-B permanent magnets produced by Laser Powder Bed Fusion
Powder bed fusion of metals using a laser beam (PBF-LB/M) is an established additive manufacturing (AM) method that can be used to fabricate geometrically complex Nd-Fe-B magnets. However, the magnetic properties of Nd-Fe-B magnets manufactured by PBF-LB/M are typically inferior to conventionally produced magnets. To overcome this drawback, we modified the surface of the permanent magnet feedstock powder with 1 wt.% surfactant-free Ag nanoparticles (NPs) supporting the formation of relevant phases required for permanent magnetic performance to achieve a suitable micro- and nanostructure after AM. Our study is accompanied by finite element simulations, revealing the impact and dependency of process parameters during PBF-LB/M: a wide temperature field with a high-gradient profile in the front and on the bottom of an overheated region, implying a vast local heating/cooling rate and in-process high thermal stress. We found experimentally that the as-built part density can be affected by both the laser power and scan speed, causing a reduction in density as both parameters increase. The functionality and microstructural properties are also investigated via VSM, HR-SEM, EDX, EBSD, and exemplarily with HR-TEM-EDX and APT. Our study found that modifying MQP-S with Ag NPs increases the coercivity by approximately 20%, which we correlate to a decreased grain size. Additionally, we identified three distinct phases in the modified and unmodified samples, where Ag is primarily found in the intergranular and Nd-rich phases of the as-built parts. Overall, the study's findings contribute to the understanding of the factors that affect the quality and magnetic properties of Nd-Fe-B magnets fabricated through PBF-LB/M and provide valuable insights for further research in this area.
- 5 May 2023
- Published by American Chemical Society (ACS) in ChemRxiv
Open AccessInfluence of silver nanoparticle additivation on Nd-Fe-B permanent magnets produced by Laser Powder Bed Fusion
Powder bed fusion of metals using a laser beam (PBF-LB/M) is an established additive manufacturing (AM) method that can be used to fabricate geometrically complex Nd-Fe-B magnets. However, the magnetic properties of Nd-Fe-B magnets manufactured by PBF-LB/M are typically inferior to conventionally produced magnets. To overcome this drawback, we modified the surface of the permanent magnet feedstock powder with 1 wt.% surfactant-free Ag nanoparticles (NPs) supporting the formation of relevant phases required for permanent magnetic performance to achieve a suitable micro- and nanostructure after AM. Our study is accompanied by finite element simulations, revealing the impact and dependency of process parameters during PBF-LB/M: a wide temperature field with a high-gradient profile in the front and on the bottom of an overheated region, implying a vast local heating/cooling rate and in-process high thermal stress. We found experimentally that the as-built part density can be affected by both the laser power and scan speed, causing a reduction in density as both parameters increase. The functionality and microstructural properties are also investigated via VSM, HR-SEM, EDX, EBSD, and exemplarily with HR-TEM-EDX and APT. Our study found that modifying MQP-S with Ag NPs increases the coercivity by approximately 20%, which we correlate to a decreased grain size. Additionally, we identified three distinct phases in the modified and unmodified samples, where Ag is primarily found in the intergranular and Nd-rich phases of the as-built parts. Overall, the study's findings contribute to the understanding of the factors that affect the quality and magnetic properties of Nd-Fe-B magnets fabricated through PBF-LB/M and provide valuable insights for further research in this area.
- Open Access
Nanoparticle Tracing during Laser Powder Bed Fusion of Oxide Dispersion Strengthened Steels
The control of nanoparticle agglomeration during the fabrication of oxide dispersion strengthened steels is a key factor in maximizing their mechanical and high temperature reinforcement properties. However, the characterization of the nanoparticle evolution during processing represents a challenge due to the lack of experimental methodologies that allow in situ evaluation during laser powder bed fusion (LPBF) of nanoparticle-additivated steel powders. To address this problem, a simulation scheme is proposed to trace the drift and the interactions of the nanoparticles in the melt pool by joint heat-melt-microstructure–coupled phase-field simulation with nanoparticle kinematics. Van der Waals attraction and electrostatic repulsion with screened-Coulomb potential are explicitly employed to model the interactions with assumptions made based on reported experimental evidence. Numerical simulations have been conducted for LPBF of oxide nanoparticle-additivated PM2000 powder considering various factors, including the nanoparticle composition and size distribution. The obtained results provide a statistical and graphical demonstration of the temporal and spatial variations of the traced nanoparticles, showing ∼55% of the nanoparticles within the generated grains, and a smaller fraction of ∼30% in the pores, ∼13% on the surface, and ∼2% on the grain boundaries. To prove the methodology and compare it with experimental observations, the simulations are performed for LPBF of a 0.005 wt % yttrium oxide nanoparticle-additivated PM2000 powder and the final degree of nanoparticle agglomeration and distribution are analyzed with respect to a series of geometric and material parameters.
Open AccessNanoparticle Tracing during Laser Powder Bed Fusion of Oxide Dispersion Strengthened Steels
The control of nanoparticle agglomeration during the fabrication of oxide dispersion strengthened steels is a key factor in maximizing their mechanical and high temperature reinforcement properties. However, the characterization of the nanoparticle evolution during processing represents a challenge due to the lack of experimental methodologies that allow in situ evaluation during laser powder bed fusion (LPBF) of nanoparticle-additivated steel powders. To address this problem, a simulation scheme is proposed to trace the drift and the interactions of the nanoparticles in the melt pool by joint heat-melt-microstructure–coupled phase-field simulation with nanoparticle kinematics. Van der Waals attraction and electrostatic repulsion with screened-Coulomb potential are explicitly employed to model the interactions with assumptions made based on reported experimental evidence. Numerical simulations have been conducted for LPBF of oxide nanoparticle-additivated PM2000 powder considering various factors, including the nanoparticle composition and size distribution. The obtained results provide a statistical and graphical demonstration of the temporal and spatial variations of the traced nanoparticles, showing ∼55% of the nanoparticles within the generated grains, and a smaller fraction of ∼30% in the pores, ∼13% on the surface, and ∼2% on the grain boundaries. To prove the methodology and compare it with experimental observations, the simulations are performed for LPBF of a 0.005 wt % yttrium oxide nanoparticle-additivated PM2000 powder and the final degree of nanoparticle agglomeration and distribution are analyzed with respect to a series of geometric and material parameters.