Jinglei Bi
Research Subjects
Jinglei Bi has a total of 68 co-authors. Here are the top co-authors by number of shared publications:
- Shengchun Yang
Xi’an Jiaotong University
11 shared publications - Bin Wang
MOE Key Laboratory for Non-equilibrium Synthesis and Modulation of Condensed Matter, Key Laboratory of Shaanxi for Advanced Materials and Mesoscopic Physics, State Key Laboratory for Mechanical Behavior of Materials, School of Physics, Xi'an Jiaotong University, No. 28 West Xianning Road, Xi'an 710049, China
8 shared publications Xiaojing Zhang
8 shared publicationsShengchun Yang
7 shared publicationsLaifei Xiong
4 shared publicationsXiaojing Yu
4 shared publications
Latest Publications
- 22 July 2022
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 14 (30) , 34750-34760
Hydrogenated Boride-Assisted Gram-Scale Production of Platinum–Palladium Alloy Nanoparticles on Carbon Black for PEMFC Cathodes: A Study from a Practical Standpoint
Platinum-palladium (PtPd) alloy catalysts with high durability are viable substituents to commercial Pt/C for proton exchange membrane fuel cells (PEMFCs). Herein, a facile approach for gram-scale preparation of PtxPd100-x alloy nanoparticles on carbon black is developed. The optimized Pt54Pd46/B-C catalyst shows a mass activity (MA) of 0.549 A mgPt-1 and a specific activity (SA) of 0.463 mA cm-2 at the rotating disk electrode (RDE) level, which are 3.4 and 1.9 times those of commercial Pt/C, respectively. In H2/O2 and H2/air PEMFCs, the membrane electrode assembly (MEA) with Pt54Pd46/B-C achieves peak power densities of 2.33 and 1.04 W cm-2, respectively, and shows negligible performance degradation after 100 h of running in H2/O2 conditions. Moreover, the MA of MEA with Pt54Pd46/B-C in H2/O2 PEMFC reaches 0.978 A mgPt+Pd-1 beyond the 2020 target of the Department of Energy (DOE) of 0.44 A mgPt-1. After 30k cyclic voltammetry cycles in PEMFC, the MA loss and cell voltage loss of MEA with Pt54Pd46/B-C are well within the DOE 2020 target. Density functional theory calculations reveal that the PtPd(111) surface can weaken the adsorption of *OOH and *OH compared to the Pt(111) surface, indicating that Pt54Pd46/B-C is more energetically favorable for the oxygen reduction reaction (ORR) than commercial Pt/C. This study offers a new approach for batch preparation of PtPd alloy-based catalysts for PEMFCs.
- 22 July 2022
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 14 (30) , 34750-34760
Hydrogenated Boride-Assisted Gram-Scale Production of Platinum–Palladium Alloy Nanoparticles on Carbon Black for PEMFC Cathodes: A Study from a Practical Standpoint
Platinum-palladium (PtPd) alloy catalysts with high durability are viable substituents to commercial Pt/C for proton exchange membrane fuel cells (PEMFCs). Herein, a facile approach for gram-scale preparation of PtxPd100-x alloy nanoparticles on carbon black is developed. The optimized Pt54Pd46/B-C catalyst shows a mass activity (MA) of 0.549 A mgPt-1 and a specific activity (SA) of 0.463 mA cm-2 at the rotating disk electrode (RDE) level, which are 3.4 and 1.9 times those of commercial Pt/C, respectively. In H2/O2 and H2/air PEMFCs, the membrane electrode assembly (MEA) with Pt54Pd46/B-C achieves peak power densities of 2.33 and 1.04 W cm-2, respectively, and shows negligible performance degradation after 100 h of running in H2/O2 conditions. Moreover, the MA of MEA with Pt54Pd46/B-C in H2/O2 PEMFC reaches 0.978 A mgPt+Pd-1 beyond the 2020 target of the Department of Energy (DOE) of 0.44 A mgPt-1. After 30k cyclic voltammetry cycles in PEMFC, the MA loss and cell voltage loss of MEA with Pt54Pd46/B-C are well within the DOE 2020 target. Density functional theory calculations reveal that the PtPd(111) surface can weaken the adsorption of *OOH and *OH compared to the Pt(111) surface, indicating that Pt54Pd46/B-C is more energetically favorable for the oxygen reduction reaction (ORR) than commercial Pt/C. This study offers a new approach for batch preparation of PtPd alloy-based catalysts for PEMFCs.
- 1 February 2021
- Published by Elsevier in Chemical Engineering Journal
- Vol. 405
Inter-embedded Au-Cu2O heterostructure for the enhanced hydrogen production from water splitting under the visible light
- 1 February 2021
- Published by Elsevier in Chemical Engineering Journal
- Vol. 405
Inter-embedded Au-Cu2O heterostructure for the enhanced hydrogen production from water splitting under the visible light
- 19 August 2020
- Published by Royal Society of Chemistry (RSC) in Journal of Materials Chemistry A
- Vol. 8 (36) , 18856-18862
2D hydrogenated boride as a reductant and stabilizer for in situ synthesis of ultrafine and surfactant-free carbon supported noble metal electrocatalysts with enhanced activity and stability
The common problems with carbon-supported noble metal catalysts, which are the most widely used catalysts in scientific and commercial cases, are their poor dispersion and stability, and the large particle size of the noble metal. Herein, we uncover the reducibility of 2D hydrogenated boride (HB) towards noble metal ions, such as Pt,Cl4 2−, PdCl4 2− and AuCl4 −, for synthesizing ultrafine and surfactant-free noble metal nanoparticles. Furthermore, inspired by these results, carbon supported noble metal nanoparticle electrocatalysts (M/B–C, M = Pt, Pd and Au) with an ultrafine size (2–3 nm) and a high dispersion were prepared using a simple mixing-stirring-filtering (MSF) method at room temperature, and the amount of noble metal loading reached as high as 52.9 wt%. There are no organic surfactants or other reductants involved in the entire preparation process. In light of the ultrafine size and clean surface, the M/B–C catalysts exhibit an activity that surpasses that of their commercial counterparts. The theoretical calculations indicate that the as-formed noble metal nanoparticles (NPs) present a much stronger interaction with the HB hydrolysate, that is, a 2D boron sheet, than that with carbon black, contributing to the excellent catalytic durability of M/B–C. This work provides a novel strategy for synthesizing carbon-supported noble metal electrocatalysts with an enhanced activity and durability.
- 19 August 2020
- Published by Royal Society of Chemistry (RSC) in Journal of Materials Chemistry A
- Vol. 8 (36) , 18856-18862
2D hydrogenated boride as a reductant and stabilizer for in situ synthesis of ultrafine and surfactant-free carbon supported noble metal electrocatalysts with enhanced activity and stability
The common problems with carbon-supported noble metal catalysts, which are the most widely used catalysts in scientific and commercial cases, are their poor dispersion and stability, and the large particle size of the noble metal. Herein, we uncover the reducibility of 2D hydrogenated boride (HB) towards noble metal ions, such as Pt,Cl4 2−, PdCl4 2− and AuCl4 −, for synthesizing ultrafine and surfactant-free noble metal nanoparticles. Furthermore, inspired by these results, carbon supported noble metal nanoparticle electrocatalysts (M/B–C, M = Pt, Pd and Au) with an ultrafine size (2–3 nm) and a high dispersion were prepared using a simple mixing-stirring-filtering (MSF) method at room temperature, and the amount of noble metal loading reached as high as 52.9 wt%. There are no organic surfactants or other reductants involved in the entire preparation process. In light of the ultrafine size and clean surface, the M/B–C catalysts exhibit an activity that surpasses that of their commercial counterparts. The theoretical calculations indicate that the as-formed noble metal nanoparticles (NPs) present a much stronger interaction with the HB hydrolysate, that is, a 2D boron sheet, than that with carbon black, contributing to the excellent catalytic durability of M/B–C. This work provides a novel strategy for synthesizing carbon-supported noble metal electrocatalysts with an enhanced activity and durability.
- 1 August 2020
- Published by Elsevier in Chemical Engineering Journal
- Vol. 394
Bridging effect of Co heteroatom between g-C3N4 and Pt NPs for enhanced photocatalytic hydrogen evolution
- 1 August 2020
- Published by Elsevier in Chemical Engineering Journal
- Vol. 394
Bridging effect of Co heteroatom between g-C3N4 and Pt NPs for enhanced photocatalytic hydrogen evolution
- 17 July 2020
- Published by Royal Society of Chemistry (RSC) in Journal of Materials Chemistry A
- Vol. 8 (32) , 16477-16486
Lattice-mismatch-induced growth of ultrathin Pt shells with high-index facets for boosting oxygen reduction catalysis
Owing to its high catalyzing nature, Pt holds great promise as an efficient catalyst for the oxygen reduction reaction (ORR). Although surface steps/kinks have been proven beneficial for the catalytic performance, constructing steps/kinks on Pt surfaces remains a big challenge due to the high surface energy. Herein, we demonstrate that the lattice mismatch can induce the growth of Pt shells with high-density steps on substrates. We exemplify it by depositing Pt shells on Pd–Cu alloy nanocubes, between which the lattice mismatch reaches 4.53%, and testing the resulting catalysts for the ORR. We show that Pt shells on Pd–Cu alloy nanocubes exhibit an extraordinary increase in both specific and mass activities of 32 and 16 times, respectively, as compared to the commercial Pt/C catalyst. Meanwhile, functional tests in proton exchange membrane fuel cells exhibit a 121.9 mW cm−2 increase in power density for Pd–Cu@Pt compared to the commercial Pt/C catalyst. Our result indicates that lattice mismatch between Pt shells and Pd–Cu alloy cores plays a key role in forming surface steps, while Pt shells grown on Pd cores only cause the formation of Pd@Pt nanocubes without surface steps. This work suggests that lattice mismatch can serve as an efficient parameter for preparing ORR catalysts with excellent activity and durability.
- 17 July 2020
- Published by Royal Society of Chemistry (RSC) in Journal of Materials Chemistry A
- Vol. 8 (32) , 16477-16486
Lattice-mismatch-induced growth of ultrathin Pt shells with high-index facets for boosting oxygen reduction catalysis
Owing to its high catalyzing nature, Pt holds great promise as an efficient catalyst for the oxygen reduction reaction (ORR). Although surface steps/kinks have been proven beneficial for the catalytic performance, constructing steps/kinks on Pt surfaces remains a big challenge due to the high surface energy. Herein, we demonstrate that the lattice mismatch can induce the growth of Pt shells with high-density steps on substrates. We exemplify it by depositing Pt shells on Pd–Cu alloy nanocubes, between which the lattice mismatch reaches 4.53%, and testing the resulting catalysts for the ORR. We show that Pt shells on Pd–Cu alloy nanocubes exhibit an extraordinary increase in both specific and mass activities of 32 and 16 times, respectively, as compared to the commercial Pt/C catalyst. Meanwhile, functional tests in proton exchange membrane fuel cells exhibit a 121.9 mW cm−2 increase in power density for Pd–Cu@Pt compared to the commercial Pt/C catalyst. Our result indicates that lattice mismatch between Pt shells and Pd–Cu alloy cores plays a key role in forming surface steps, while Pt shells grown on Pd cores only cause the formation of Pd@Pt nanocubes without surface steps. This work suggests that lattice mismatch can serve as an efficient parameter for preparing ORR catalysts with excellent activity and durability.
- 10 March 2020
- Published by Royal Society of Chemistry (RSC) in Journal of Materials Chemistry A
- Vol. 8 (14) , 6638-6646
Intrinsic insight on localized surface plasmon resonance enhanced methanol electro-oxidation over a Au@AgPt hollow urchin-like nanostructure
The plasmon effect on the catalytic performance of metal nanoparticles (NPs) has shown great potential for the design of novel catalytic reactions. However, the intrinsic mechanisms underlying the catalysis triggered by localized surface plasmon resonance (LSPR) are still ambiguous. In this work, we construct Au@AgPt hollow urchin-like structures (Au@AgPt HUSs) with an ultra-thin Pt shell for the electrocatalytic methanol oxidation reaction (MOR) in an alkaline solution under irradiation (200 mW cmm −2). A superior MOR mass activity (3.26 A mg−1 Pt) is achieved on Au@AgPt HUSs, which is 5.43 times that of commercial Pt black catalysts (0.6 A mg−1 Pt) under irradiation. It is also reported that localized heating, which results from the photothermal effect under irradiation, can accelerate the reaction kinetics of MOR over Au@AgPt HUSs. Theoretical calculations demonstrate that the reduced lowest unoccupied molecular orbital (LUMO) energy level of CO induced by the localized electric field can accelerate the rate-determining step *CO to *COOH, and the energetic hot carriers provide energy to promote the transfer of *CO from the hollow Pt site to the top Pt site. Thus, the hollow Pt active sites poisoned by *CO can be reactivated due to the *CO transfer mechanism, leading to more available active sites for the MOR process. This work reveals the intrinsic effect of LSPR on catalysis and paves the way to boost conventional catalytic reactions by introducing solar energy flux.
- 10 March 2020
- Published by Royal Society of Chemistry (RSC) in Journal of Materials Chemistry A
- Vol. 8 (14) , 6638-6646
Intrinsic insight on localized surface plasmon resonance enhanced methanol electro-oxidation over a Au@AgPt hollow urchin-like nanostructure
The plasmon effect on the catalytic performance of metal nanoparticles (NPs) has shown great potential for the design of novel catalytic reactions. However, the intrinsic mechanisms underlying the catalysis triggered by localized surface plasmon resonance (LSPR) are still ambiguous. In this work, we construct Au@AgPt hollow urchin-like structures (Au@AgPt HUSs) with an ultra-thin Pt shell for the electrocatalytic methanol oxidation reaction (MOR) in an alkaline solution under irradiation (200 mW cmm −2). A superior MOR mass activity (3.26 A mg−1 Pt) is achieved on Au@AgPt HUSs, which is 5.43 times that of commercial Pt black catalysts (0.6 A mg−1 Pt) under irradiation. It is also reported that localized heating, which results from the photothermal effect under irradiation, can accelerate the reaction kinetics of MOR over Au@AgPt HUSs. Theoretical calculations demonstrate that the reduced lowest unoccupied molecular orbital (LUMO) energy level of CO induced by the localized electric field can accelerate the rate-determining step *CO to *COOH, and the energetic hot carriers provide energy to promote the transfer of *CO from the hollow Pt site to the top Pt site. Thus, the hollow Pt active sites poisoned by *CO can be reactivated due to the *CO transfer mechanism, leading to more available active sites for the MOR process. This work reveals the intrinsic effect of LSPR on catalysis and paves the way to boost conventional catalytic reactions by introducing solar energy flux.
- 1 November 2019
- Published by Elsevier in Applied Catalysis B: Environment and Energy
- Vol. 256
Orienting the charge transfer path of type-II heterojunction for photocatalytic hydrogen evolution
- 1 November 2019
- Published by Elsevier in Applied Catalysis B: Environment and Energy
- Vol. 256
Orienting the charge transfer path of type-II heterojunction for photocatalytic hydrogen evolution
- 8 March 2019
- Published by Royal Society of Chemistry (RSC) in Chemical Communications
- Vol. 55 (27) , 3943-3946
Localized surface plasmon enhanced electrocatalytic methanol oxidation of AgPt bimetallic nanoparticles with an ultra-thin shell
AgPt bimetallic hollow nanoparticles (AgPt-BHNPs) with an ultra-thin shell were synthesized.
- 8 March 2019
- Published by Royal Society of Chemistry (RSC) in Chemical Communications
- Vol. 55 (27) , 3943-3946
Localized surface plasmon enhanced electrocatalytic methanol oxidation of AgPt bimetallic nanoparticles with an ultra-thin shell
AgPt bimetallic hollow nanoparticles (AgPt-BHNPs) with an ultra-thin shell were synthesized.
- 20 February 2019
- Published by Royal Society of Chemistry (RSC) in Journal of Materials Chemistry A
- Vol. 7 (11) , 6562-6571
Synergistic effects of platinum–cerium carbonate hydroxides–reduced graphene oxide on enhanced durability for methanol electro-oxidation
A hybrid Pt–Ce(CO3)OH/rGO material is revealed as a promising electrocatalyst for the methanol oxidation reaction with excellent activity and long-term durability.
- 20 February 2019
- Published by Royal Society of Chemistry (RSC) in Journal of Materials Chemistry A
- Vol. 7 (11) , 6562-6571
Synergistic effects of platinum–cerium carbonate hydroxides–reduced graphene oxide on enhanced durability for methanol electro-oxidation
A hybrid Pt–Ce(CO3)OH/rGO material is revealed as a promising electrocatalyst for the methanol oxidation reaction with excellent activity and long-term durability.
- 12 February 2019
- Published by Royal Society of Chemistry (RSC) in Journal of Materials Chemistry A
- Vol. 7 (10) , 5769-5778
Constructing ultrathin CoP nanomeshes by Er-doping for highly efficient bifunctional electrocatalysts for overall water splitting
Exploring highly efficient non-noble-metal bifunctional catalysts for water electrolysis is vital for the commercial production of hydrogen. In this study, Er, Nd, Ce, La and Gd doped CoP materials have been prepared to study the effects of rare earth (RE) element doping on both the hydrogen evolution reaction (HER) and the oxygen evolution reaction (OER), among which Er-doped CoP is found to be the best bifunctional catalyst. The Er doped CoP ultrathin nanomeshes (NMs) can be synthesized with a larger surface area (123.4 m2 g−1) and double-layer capacitance (143.1 mF cm−2) than pure CoP nanoplates, and therefore with more active sites. Benefiting from the ultrathin nanomesh morphology and electronic structure modification, the as-prepared Er-doped CoP NMs show superior electrocatalytic activity in alkaline medium, which require an overpotential of only 256 mV for the OER to afford a current density of 10 mA cm−2, obviously smaller than that of most reported non-noble metal catalysts. Additionally, the Er-doped CoP NMs also display a favorable catalytic performance for the HER in both acidic and alkaline media with an overpotential of 52 mV and 66 mV at 10 mA cm−2, respectively. The excellent bifunctional nature of Er-doped CoP NMs will make the electrolysis device more operational and cost-effective. The corresponding two-electrode electrolysis system needs a cell voltage of merely 1.58 V at 10 mA cm−2 in alkaline medium, and maintains stable electrolysis for 25 h, which compares favorably with previously reported bifunctional catalysts. The density functional theory (DFT) calculations indicated that the superior performance of such a catalyst resulted from the smaller overpotential and hydrogen adsorption energy This study provides an appealing method to improve performance which can be extended to other transition metal catalysts.
- 12 February 2019
- Published by Royal Society of Chemistry (RSC) in Journal of Materials Chemistry A
- Vol. 7 (10) , 5769-5778
Constructing ultrathin CoP nanomeshes by Er-doping for highly efficient bifunctional electrocatalysts for overall water splitting
Exploring highly efficient non-noble-metal bifunctional catalysts for water electrolysis is vital for the commercial production of hydrogen. In this study, Er, Nd, Ce, La and Gd doped CoP materials have been prepared to study the effects of rare earth (RE) element doping on both the hydrogen evolution reaction (HER) and the oxygen evolution reaction (OER), among which Er-doped CoP is found to be the best bifunctional catalyst. The Er doped CoP ultrathin nanomeshes (NMs) can be synthesized with a larger surface area (123.4 m2 g−1) and double-layer capacitance (143.1 mF cm−2) than pure CoP nanoplates, and therefore with more active sites. Benefiting from the ultrathin nanomesh morphology and electronic structure modification, the as-prepared Er-doped CoP NMs show superior electrocatalytic activity in alkaline medium, which require an overpotential of only 256 mV for the OER to afford a current density of 10 mA cm−2, obviously smaller than that of most reported non-noble metal catalysts. Additionally, the Er-doped CoP NMs also display a favorable catalytic performance for the HER in both acidic and alkaline media with an overpotential of 52 mV and 66 mV at 10 mA cm−2, respectively. The excellent bifunctional nature of Er-doped CoP NMs will make the electrolysis device more operational and cost-effective. The corresponding two-electrode electrolysis system needs a cell voltage of merely 1.58 V at 10 mA cm−2 in alkaline medium, and maintains stable electrolysis for 25 h, which compares favorably with previously reported bifunctional catalysts. The density functional theory (DFT) calculations indicated that the superior performance of such a catalyst resulted from the smaller overpotential and hydrogen adsorption energy This study provides an appealing method to improve performance which can be extended to other transition metal catalysts.