Berna Yazici
Berna Yazici has a total of 15 co-authors. Here are the top co-authors by number of shared publications:
- Semra Malkoç
Eskişehir Teknik Üniversitesi
4 shared publications - Mustafa Cavus
Eskisehir Technical University, Department of Statistics, Eskisehir, Turkey
3 shared publications - Betul Kan Kilinc
Anadolu University
2 shared publications - Bülent Günsoy
Anadolu Üniversitesi
2 shared publications - Ece Özgören
Süleyman Demirel University
2 shared publications - Güler Günsoy
Anadolu Üniversitesi
2 shared publications
Latest Publications
- 27 July 2026
- Published by Anadolu Universitesi Bilim ve Teknoloji Dergisi C : Yasam Bilimleri ve Biyoteknoloji in Eskişehir Teknik Üniversitesi Bilim ve Teknoloji Dergisi - C Yaşam Bilimleri ve Biyoteknoloji
- Vol. 15 (2) , 97-110
ASSESSMENT OF THE LEVEL OF KNOWLEDGE AND AWARENESS OF HOSPITAL EMPLOYEES ABOUT MEDICAL WASTE MANAGEMENT: THE CASE OF KÜTAHYA, TÜRKİYE
This study aims to assess the level of knowledge and awareness of employees of two hospitals in Kütahya regarding medical waste. The questionnaire conducted participants to indicate the extent to which they participated in the assessments by considering medical waste management practices in the facility where they work. The study population consisted of hospital employees working for two hospitals in the center of Kütahya, and the sample consisted of 516 hospital employees who participated in the survey, but some items weren’t answered by the participants. The first 7 questions are demographic ones, the 8th question consists of a 5-point Likert scale with 16 items, and the last 7 questions consist of a total of 15 questions about whether the meanings of the symbols in the pictures are known or not, as well as the questionnaire to assess knowledge, attitudes, and perceptions. The data analyzed by SPSS V.26. At the last part of the questionnaire, 96.7% of the respondents answered the question about "radioactive waste emblem correctly". Similarly, the 96.7% of the respondents answered correctly the question "What color are the bags used for medical waste in the healthcare facility where you work?", as “red”. Based on the results of the research, it was found that the level of knowledge of healthcare professionals in the two hospitals was at a high level. Medical waste knowledge level varies significantly depending on the health institution where the individual works, age, and length of service. The level of medical waste knowledge does not differ significantly depending on the individual's gender, the unit the individual works in, the individual's position in the hospital, or the individual's education level. In the analysis results conducted to determine the relationship between participants' medical waste knowledge and awareness levels and gender, it was determined that there was no significant difference between the answers given to all statements and in terms of gender. Recommendations were made to help manage medical waste and improve the level of knowledge and awareness of medical waste. Informative work on the courses given at regular intervals to inform the employees about the activities of the medical waste sterilization facility by organizing a technical trip. As a result of the study, it is concluded that increasing the training of hospital employees on medical waste is of great importance in terms of public health, personnel health and environmental health.
- 27 July 2026
- Published by Anadolu Universitesi Bilim ve Teknoloji Dergisi C : Yasam Bilimleri ve Biyoteknoloji in Eskişehir Teknik Üniversitesi Bilim ve Teknoloji Dergisi - C Yaşam Bilimleri ve Biyoteknoloji
- Vol. 15 (2) , 97-110
ASSESSMENT OF THE LEVEL OF KNOWLEDGE AND AWARENESS OF HOSPITAL EMPLOYEES ABOUT MEDICAL WASTE MANAGEMENT: THE CASE OF KÜTAHYA, TÜRKİYE
This study aims to assess the level of knowledge and awareness of employees of two hospitals in Kütahya regarding medical waste. The questionnaire conducted participants to indicate the extent to which they participated in the assessments by considering medical waste management practices in the facility where they work. The study population consisted of hospital employees working for two hospitals in the center of Kütahya, and the sample consisted of 516 hospital employees who participated in the survey, but some items weren’t answered by the participants. The first 7 questions are demographic ones, the 8th question consists of a 5-point Likert scale with 16 items, and the last 7 questions consist of a total of 15 questions about whether the meanings of the symbols in the pictures are known or not, as well as the questionnaire to assess knowledge, attitudes, and perceptions. The data analyzed by SPSS V.26. At the last part of the questionnaire, 96.7% of the respondents answered the question about "radioactive waste emblem correctly". Similarly, the 96.7% of the respondents answered correctly the question "What color are the bags used for medical waste in the healthcare facility where you work?", as “red”. Based on the results of the research, it was found that the level of knowledge of healthcare professionals in the two hospitals was at a high level. Medical waste knowledge level varies significantly depending on the health institution where the individual works, age, and length of service. The level of medical waste knowledge does not differ significantly depending on the individual's gender, the unit the individual works in, the individual's position in the hospital, or the individual's education level. In the analysis results conducted to determine the relationship between participants' medical waste knowledge and awareness levels and gender, it was determined that there was no significant difference between the answers given to all statements and in terms of gender. Recommendations were made to help manage medical waste and improve the level of knowledge and awareness of medical waste. Informative work on the courses given at regular intervals to inform the employees about the activities of the medical waste sterilization facility by organizing a technical trip. As a result of the study, it is concluded that increasing the training of hospital employees on medical waste is of great importance in terms of public health, personnel health and environmental health.
- 27 January 2026
- Published by Anadolu Universitesi Bilim ve Teknoloji Dergisi C : Yasam Bilimleri ve Biyoteknoloji in Eskişehir Teknik Üniversitesi Bilim ve Teknoloji Dergisi - C Yaşam Bilimleri ve Biyoteknoloji
- Vol. 15 (1) , 1-14
HIGH QUANTILE ANALYSIS OF EXTREME WINDS DATA
In contemporary wind engineering design, assessing and managing extreme wind conditions, particularly the distribution of annual maximum wind speeds, is pivotal for evaluating structural loads and ensuring the safety of various structures. While past research has extensively explored parametric models like the Gumbel, Weibull, and Generalized Pareto Distribution for modeling extreme wind distributions and the calculation of confidence intervals for distribution parameters using parametric and nonparametric bootstrapping techniques, there has been a notable dearth of studies focusing on nonparametric bootstrap methods for establishing confidence intervals for extreme quantiles. This study addresses this research gap by investigating the distribution of high quantiles associated with extreme wind speeds using data from maximum gust wind speed records in Türkiye's Isparta region. The primary objective is to create non-parametric confidence intervals for high quantiles, specifically those linked to extreme 50-year gust wind speeds, with the ultimate goal of enhancing the structural safety of wind turbines susceptible to extreme wind conditions. Multiple nonparametric bootstrap methods are applied, revealing that the accelerated Bias-corrected approach excels in terms of achieving reliable coverage probabilities, providing a robust framework for managing the risks posed by extreme wind events in wind energy infrastructure and structural engineering.
- 27 January 2026
- Published by Anadolu Universitesi Bilim ve Teknoloji Dergisi C : Yasam Bilimleri ve Biyoteknoloji in Eskişehir Teknik Üniversitesi Bilim ve Teknoloji Dergisi - C Yaşam Bilimleri ve Biyoteknoloji
- Vol. 15 (1) , 1-14
HIGH QUANTILE ANALYSIS OF EXTREME WINDS DATA
In contemporary wind engineering design, assessing and managing extreme wind conditions, particularly the distribution of annual maximum wind speeds, is pivotal for evaluating structural loads and ensuring the safety of various structures. While past research has extensively explored parametric models like the Gumbel, Weibull, and Generalized Pareto Distribution for modeling extreme wind distributions and the calculation of confidence intervals for distribution parameters using parametric and nonparametric bootstrapping techniques, there has been a notable dearth of studies focusing on nonparametric bootstrap methods for establishing confidence intervals for extreme quantiles. This study addresses this research gap by investigating the distribution of high quantiles associated with extreme wind speeds using data from maximum gust wind speed records in Türkiye's Isparta region. The primary objective is to create non-parametric confidence intervals for high quantiles, specifically those linked to extreme 50-year gust wind speeds, with the ultimate goal of enhancing the structural safety of wind turbines susceptible to extreme wind conditions. Multiple nonparametric bootstrap methods are applied, revealing that the accelerated Bias-corrected approach excels in terms of achieving reliable coverage probabilities, providing a robust framework for managing the risks posed by extreme wind events in wind energy infrastructure and structural engineering.
- Open Access
- 1 January 2023
- Published by Communications Faculty of Sciences University of Ankara Series A1 Mathematics and Statistics in Communications Faculty of Sciences University of Ankara Series A1 Mathematics and Statistics
- Vol. 72 (3) , 686-700
Comparison of the several two-parameter exponential distributed group means in the presence of outliers
The two-parameter exponential distribution is often used to model the lifetime of a product. The comparison of the mean lifetimes of several products is a main concern in reliability applications. In this study, the performance of the methods to compare the mean lifetimes of several products based on generalized p-value, parametric bootstrap, and fiducial approach are compared in the presence of outliers. The results of Monte-Carlo simulations clearly indicate that there is no uniformly powerful test. The parametric bootstrap test is superior to the others except in the case of the lower number of groups and the presence of outliers. An illustrative example of testing the equality lifetimes of a component is given to perform the proposed tests. The considered tests are implemented in an R package doex.
- 1 January 2023
- Published by Communications Faculty of Sciences University of Ankara Series A1 Mathematics and Statistics in Communications Faculty of Sciences University of Ankara Series A1 Mathematics and Statistics
- Vol. 72 (3) , 686-700
Open AccessComparison of the several two-parameter exponential distributed group means in the presence of outliers
The two-parameter exponential distribution is often used to model the lifetime of a product. The comparison of the mean lifetimes of several products is a main concern in reliability applications. In this study, the performance of the methods to compare the mean lifetimes of several products based on generalized p-value, parametric bootstrap, and fiducial approach are compared in the presence of outliers. The results of Monte-Carlo simulations clearly indicate that there is no uniformly powerful test. The parametric bootstrap test is superior to the others except in the case of the lower number of groups and the presence of outliers. An illustrative example of testing the equality lifetimes of a component is given to perform the proposed tests. The considered tests are implemented in an R package doex.
- Open Access
- 29 December 2022
- Published by Anadolu Universitesi Bilim ve Teknoloji Dergisi-A: Uygulamali Bilimler ve Muhendislik in Eskişehir Technical University Journal of Science and Technology A - Applied Sciences and Engineering
- Vol. 23 (4) , 276-290
OPTIMIZATION OF CHROMIUM AND LEAD BIOSORPTION IN WASTEWATER USING 33 FACTORIAL DESIGN
- 29 December 2022
- Published by Anadolu Universitesi Bilim ve Teknoloji Dergisi-A: Uygulamali Bilimler ve Muhendislik in Eskişehir Technical University Journal of Science and Technology A - Applied Sciences and Engineering
- Vol. 23 (4) , 276-290
Open AccessOPTIMIZATION OF CHROMIUM AND LEAD BIOSORPTION IN WASTEWATER USING 33 FACTORIAL DESIGN
- 7 July 2022
- Published by Wiley in Environmental Quality Management
- Vol. 32 (3) , 209-222
Optimization of the removal of chromium and lead by Penicillium chrysogenum using 2k factorial experiments
This study aims to prepare a low‐cost, environmentally friendly, and alternative, biosorbent to remove chromium Cr (III) and lead Pb (II) from polluted water and to find out the highest removal efficiencies using 2 k factorial experiments. The Cr (III) and Pb (II) tolerant fungal strain identified as Penicillium chrysogenum was isolated from ceramic industrial sludge. The impact of process variables on biosorption of Cr (III) and Pb (II) by P. chrysogenum was first evaluated with the Taguchi screening design. Factors and levels were determined to optimize Cr (III) and Pb (II) removal efficiency. According to this, five factors; initial concentration, pH, biosorbent dose, temperature, and inactivation methods were determined for both metals, each factor defined as a fixed factor with two levels. Optimization of the parameters affecting the removal process was determined by the Taguchi method and the signal‐to‐noise (S/N) ratios are calculated. The maximum removal efficiency (99.92%) was observed at pH 7, biosorbent 1 mg L –1 , inactivation with autoclaving, and at 20°C with an initial metal concentration of 50 mg L –1 Cr (III). On the other hand, the maximum removal efficiency (98.99%) was observed at pH 4, biosorbent 5 mg L –1 , inactivation with autoclaving, and at 20°C with an initial metal concentration of 50 mg L –1 Pb (II). Furthermore, metal ions removal by P. chrysogenum was also confirmed by scanning electron microscopy (SEM) combined with an energy dispersive X‐ray spectrometer (EDS). The presence of functional groups on fungal cells of metal binding was investigated by Fourier transform infrared (FT‐IR).
- 7 July 2022
- Published by Wiley in Environmental Quality Management
- Vol. 32 (3) , 209-222
Optimization of the removal of chromium and lead by Penicillium chrysogenum using 2k factorial experiments
This study aims to prepare a low‐cost, environmentally friendly, and alternative, biosorbent to remove chromium Cr (III) and lead Pb (II) from polluted water and to find out the highest removal efficiencies using 2 k factorial experiments. The Cr (III) and Pb (II) tolerant fungal strain identified as Penicillium chrysogenum was isolated from ceramic industrial sludge. The impact of process variables on biosorption of Cr (III) and Pb (II) by P. chrysogenum was first evaluated with the Taguchi screening design. Factors and levels were determined to optimize Cr (III) and Pb (II) removal efficiency. According to this, five factors; initial concentration, pH, biosorbent dose, temperature, and inactivation methods were determined for both metals, each factor defined as a fixed factor with two levels. Optimization of the parameters affecting the removal process was determined by the Taguchi method and the signal‐to‐noise (S/N) ratios are calculated. The maximum removal efficiency (99.92%) was observed at pH 7, biosorbent 1 mg L –1 , inactivation with autoclaving, and at 20°C with an initial metal concentration of 50 mg L –1 Cr (III). On the other hand, the maximum removal efficiency (98.99%) was observed at pH 4, biosorbent 5 mg L –1 , inactivation with autoclaving, and at 20°C with an initial metal concentration of 50 mg L –1 Pb (II). Furthermore, metal ions removal by P. chrysogenum was also confirmed by scanning electron microscopy (SEM) combined with an energy dispersive X‐ray spectrometer (EDS). The presence of functional groups on fungal cells of metal binding was investigated by Fourier transform infrared (FT‐IR).
- Open Access
- 16 September 2021
- Published by International Journal of Engineering and Innovative Research in International Journal of Engineering and Innovative Research
- Vol. 3 (3) , 187-200
OPTIMIZATION OF REMOVAL EFFICIENCY AND ABSORPTION CAPACITY OF DYESTUFFS BY ASPERGILLUS SP. USING MANOVA
Fungi is widely found on air, soil, water and organic substances in nature. Unlike single-celled bacteria, fungi form multicellular structures, sometimes even visible to the naked eye. In studies of Aspergillus sp. removal and dye removal in order to obtain information, examinations are made by painting. Basic dyes, when ionized, are charged with positive electricity. Basic dyes include malachite green, methyl violet, crystal violet, and basic fuchsin. The aim of this research is to determine the effects of different factors on the parameters of absorption capacity and the removal efficiency of malachite green, methyl violet, crystal violet and basic fuchsin from Aspergillus sp. The data analyzed using Minitab statistical software. MANOVA used as the statistical analysis. It is concluded that the temperature and initial concentration have significant effect on removal efficiency and absorption capacity.
- 16 September 2021
- Published by International Journal of Engineering and Innovative Research in International Journal of Engineering and Innovative Research
- Vol. 3 (3) , 187-200
Open AccessOPTIMIZATION OF REMOVAL EFFICIENCY AND ABSORPTION CAPACITY OF DYESTUFFS BY ASPERGILLUS SP. USING MANOVA
Fungi is widely found on air, soil, water and organic substances in nature. Unlike single-celled bacteria, fungi form multicellular structures, sometimes even visible to the naked eye. In studies of Aspergillus sp. removal and dye removal in order to obtain information, examinations are made by painting. Basic dyes, when ionized, are charged with positive electricity. Basic dyes include malachite green, methyl violet, crystal violet, and basic fuchsin. The aim of this research is to determine the effects of different factors on the parameters of absorption capacity and the removal efficiency of malachite green, methyl violet, crystal violet and basic fuchsin from Aspergillus sp. The data analyzed using Minitab statistical software. MANOVA used as the statistical analysis. It is concluded that the temperature and initial concentration have significant effect on removal efficiency and absorption capacity.
- 5 July 2021
- Published by Taylor & Francis in Communications in Statistics - Simulation and Computation
- Vol. 52 (8) , 3568-3580
Penalized power properties of the normality tests in the presence of outliers
The assumption of normality has a crucial importance in many statistical procedures. Therefore, a number of normality tests are proposed. Also, many investigations are conducted on the performance of these normality tests under a set of alternative distribution. However, there are few studies to compare the performance of the commonly used normality tests in the presence of outliers, but they are not comprehensive. It is important, since the outliers may increase the variability in the data set, they cause the decrease in the statistical power. In this study we show the performance of the commonly used normality tests in the presence of outlier in the data set. An outlier generation method is implied to generate uniform tails and the effects of various magnitude of outliers on the normality tests are obtained in terms of penalized power and Type I error probability. As a result, the most powerful tests are suggested to the researchers for different magnitude of outliers, sample sizes and the contamination ratios. Two real data applications are given to illustrate the importance of choosing the appropriate test.
- 5 July 2021
- Published by Taylor & Francis in Communications in Statistics - Simulation and Computation
- Vol. 52 (8) , 3568-3580
Penalized power properties of the normality tests in the presence of outliers
The assumption of normality has a crucial importance in many statistical procedures. Therefore, a number of normality tests are proposed. Also, many investigations are conducted on the performance of these normality tests under a set of alternative distribution. However, there are few studies to compare the performance of the commonly used normality tests in the presence of outliers, but they are not comprehensive. It is important, since the outliers may increase the variability in the data set, they cause the decrease in the statistical power. In this study we show the performance of the commonly used normality tests in the presence of outlier in the data set. An outlier generation method is implied to generate uniform tails and the effects of various magnitude of outliers on the normality tests are obtained in terms of penalized power and Type I error probability. As a result, the most powerful tests are suggested to the researchers for different magnitude of outliers, sample sizes and the contamination ratios. Two real data applications are given to illustrate the importance of choosing the appropriate test.
- Retracted
- 10 June 2021
- Published by Taylor & Francis in Journal of Applied Statistics
- Vol. 48 (13-15) , 2906-2919
A comparative study of computation approaches of the generalized F-test
The Generalized F-test is derived based on the Generalized P-value Method to test the equality of normally distributed group means under unequal variances. There are two approaches to compute the p-value of the GF test, based on beta and chi-squared random numbers. From prior art in the literature, it appears that the two computation approaches of the Generalized tests are equivalent. In this study, the equivalence of these approaches is investigated in an extensive Monte-Carlo simulation study in terms of Type I error probability and penalized power. It is found that the equivalence of the computation approaches is not quite correct and that there is a difference between their conclusion, and researchers should decide which one is powerful than the others according to the structure of data, such as sample size, and the number of groups. Also, real data examples are given to show the opposite decisions of the computation approaches.
- 10 June 2021
- Published by Taylor & Francis in Journal of Applied Statistics
- Vol. 48 (13-15) , 2906-2919
RetractedA comparative study of computation approaches of the generalized F-test
The Generalized F-test is derived based on the Generalized P-value Method to test the equality of normally distributed group means under unequal variances. There are two approaches to compute the p-value of the GF test, based on beta and chi-squared random numbers. From prior art in the literature, it appears that the two computation approaches of the Generalized tests are equivalent. In this study, the equivalence of these approaches is investigated in an extensive Monte-Carlo simulation study in terms of Type I error probability and penalized power. It is found that the equivalence of the computation approaches is not quite correct and that there is a difference between their conclusion, and researchers should decide which one is powerful than the others according to the structure of data, such as sample size, and the number of groups. Also, real data examples are given to show the opposite decisions of the computation approaches.
- Open Access
- 1 May 2021
- Published by International Journal of Engineering and Innovative Research in International Journal of Engineering and Innovative Research
- Vol. 3 (2) , 115-120
2k Factorial Experiments in Reliability Analysis for Weibull and log-normal Distributions
The life times of the components of a product are often analysed in quality control processes. Design of Experiment is mainly used to achieve quality but its’ application to life times are less common. Life times always associate with Reliability. This study integrates experimental design specifically a two-level factorial experimental design and simulation models to determine the important the stress factors subjected to different conditions which significantly effects the life times of a product. The main purpose is to optimize the response by extending the lifetimes of a product. The Factors considered are Temperature and voltage and their magnitude of the power are set at two levels. Simulation design of Weibull and log-normal distributions are used to generate failure times and maximum likelihood (ML) applied in the estimation of parameters.
- 1 May 2021
- Published by International Journal of Engineering and Innovative Research in International Journal of Engineering and Innovative Research
- Vol. 3 (2) , 115-120
Open Access2k Factorial Experiments in Reliability Analysis for Weibull and log-normal Distributions
The life times of the components of a product are often analysed in quality control processes. Design of Experiment is mainly used to achieve quality but its’ application to life times are less common. Life times always associate with Reliability. This study integrates experimental design specifically a two-level factorial experimental design and simulation models to determine the important the stress factors subjected to different conditions which significantly effects the life times of a product. The main purpose is to optimize the response by extending the lifetimes of a product. The Factors considered are Temperature and voltage and their magnitude of the power are set at two levels. Simulation design of Weibull and log-normal distributions are used to generate failure times and maximum likelihood (ML) applied in the estimation of parameters.
- Open Access
- 10 January 2020
- Published by International Review of Economics and Management in International Review of Economics and Management
- Vol. 7 (2) , 1-32
AÇIK VE UZAKTAN EĞİTİMİN KADIN GÜÇLENDİRMESİNDE ÖNEMİ: ANADOLU ÜNİVERSİTESİ ÖRNEĞİ
En tr In today’ s globalizing World, the important fact is that social utility level of the society depends on people’s happiness in which education has an inarguable role on. This study first examines the concept of women empowerment both theoretically and empirically. Literature on the concept is investigated by its connections to education and to Open and Distance Education System of Anadolu University, which is one of the pioneers of open and distance education. Secondly, beneficiaries of the Open and Distance Education System examined and the role of the system on people is studied using qualitative analysis. The outcomes show that Anadolu University Open and Distance Education System has the positive effects on social and economic empowerment and women’s participation on private decisions, economic trust, private independency and freedom, individual mobility are vital findings of this study. Küreselleşen dünyada toplumun sosyal refah seviyesinin yüksekliği bireylerinin mutlu olmasına bağlı olduğuna göre eğitimin bu anlamdaki rolü çok önemlidir. Çalışmada, güçlendirme kavramı ve boyutları kadın güçlendirmesi kavramı teorik ve amprik olarak incelenmiştir. Literatürde kadın güçlendirmesi ile eğitim arasındaki ilişkiyi sorgulayan araştırmalar incelenerek, açık ve uzaktan eğitim sisteminde öncü olan Anadolu Üniversitesi Açıköğretim Sisteminden bahsedilmiştir. Daha sonra ise AÖS’nden eğitim alanların güçlendirme ve kadın güçlendirmesindeki rolü nitel analizle incelenmiştir. Çalışmada Anadolu Üniversitesi AÖS’nin kadınların güçlendirilmesi konusunda hane içi kararlara katılma, ekonomik güven, hane içi kararlarda bağımsız ve özgür olmak, bireysel hareketlilik konusunda etkili olması son derece önemli olup bu göstergeler ile kadınlarda sosyal ve ekonomik güçlendirmenin sağlanmış olması çalışmada ulaşılan önemli sonuçlardır.
- 10 January 2020
- Published by International Review of Economics and Management in International Review of Economics and Management
- Vol. 7 (2) , 1-32
Open AccessAÇIK VE UZAKTAN EĞİTİMİN KADIN GÜÇLENDİRMESİNDE ÖNEMİ: ANADOLU ÜNİVERSİTESİ ÖRNEĞİ
En tr In today’ s globalizing World, the important fact is that social utility level of the society depends on people’s happiness in which education has an inarguable role on. This study first examines the concept of women empowerment both theoretically and empirically. Literature on the concept is investigated by its connections to education and to Open and Distance Education System of Anadolu University, which is one of the pioneers of open and distance education. Secondly, beneficiaries of the Open and Distance Education System examined and the role of the system on people is studied using qualitative analysis. The outcomes show that Anadolu University Open and Distance Education System has the positive effects on social and economic empowerment and women’s participation on private decisions, economic trust, private independency and freedom, individual mobility are vital findings of this study. Küreselleşen dünyada toplumun sosyal refah seviyesinin yüksekliği bireylerinin mutlu olmasına bağlı olduğuna göre eğitimin bu anlamdaki rolü çok önemlidir. Çalışmada, güçlendirme kavramı ve boyutları kadın güçlendirmesi kavramı teorik ve amprik olarak incelenmiştir. Literatürde kadın güçlendirmesi ile eğitim arasındaki ilişkiyi sorgulayan araştırmalar incelenerek, açık ve uzaktan eğitim sisteminde öncü olan Anadolu Üniversitesi Açıköğretim Sisteminden bahsedilmiştir. Daha sonra ise AÖS’nden eğitim alanların güçlendirme ve kadın güçlendirmesindeki rolü nitel analizle incelenmiştir. Çalışmada Anadolu Üniversitesi AÖS’nin kadınların güçlendirilmesi konusunda hane içi kararlara katılma, ekonomik güven, hane içi kararlarda bağımsız ve özgür olmak, bireysel hareketlilik konusunda etkili olması son derece önemli olup bu göstergeler ile kadınlarda sosyal ve ekonomik güçlendirmenin sağlanmış olması çalışmada ulaşılan önemli sonuçlardır.