Carlos T. B. Paula
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Carlos T. B. Paula has a total of 31 co-authors. Here are the top co-authors by number of shared publications:
- Arménio Coimbra Serra
Department of Chemical Engineering, Faculty of Sciences and Technology, University of Coimbra, 3030-790 Coimbra, Portugal
5 shared publications - Ana Clotilde Fonseca
University of Coimbra
4 shared publications - Jorge Fernando Jordao Coelho
CEMMPRE, ARISE, Department of Chemical Engineering, University of Coimbra, Rua Sílvio Lima-Pólo II, 3030-790 Coimbra, Portugal
3 shared publications - Patrícia Pereira
CEMMPRE, ARISE, Department of Chemical Engineering, University of Coimbra, Rua Sílvio Lima-Pólo II, 3030-790 Coimbra, Portugal
3 shared publications - Rafael C. Rebelo
University of Coimbra, CEMMPRE, ARISE, Department of Chemical Engineering, Rua Sílvio Lima-Polo II, 3030-790 Coimbra, Portugal
3 shared publications Jorge F.J. Coelho
2 shared publications
Latest Publications
- Open Access
- 29 September 2026
- Published by Elsevier in Polymer Degradation and Stability
- Vol. 254
Synthesis of poly(butylene oxydiethylene adipate-co-terephthalate) with reduced crystallinity and accelerated degradation in seawater and soil
- 29 September 2026
- Published by Elsevier in Polymer Degradation and Stability
- Vol. 254
Open AccessSynthesis of poly(butylene oxydiethylene adipate-co-terephthalate) with reduced crystallinity and accelerated degradation in seawater and soil
- Top Cited PapersOpen Access
- 6 January 2026
- Published by Wiley in Interdisciplinary Medicine
- Vol. 4 (1)
Vat photopolymerization‐based bioprinting: Shaping next‐generation tissues with light
Vat photopolymerization (VP)‐based bioprinting is rapidly emerging as a transformative platform for fabricating complex, cell‐laden tissue constructs with unparalleled spatial resolution and geometric precision. This review presents a comprehensive overview of recent advances in VP‐based bioprinting, organized around core themes of photopolymerization chemistry, printing modalities, bio‐ink design, and biomedical applications. We first describe the underlying crosslinking mechanisms including chain‐growth, step‐growth, redox‐mediated, and initiator‐free systems that enable spatiotemporal control over polymerization. The discussion then moves to key VP‐based bioprinting techniques such as stereolithography apparatus (SLA), digital light processing, two‐photon polymerization, and volumetric additive manufacturing, emphasizing their printing principles and suitability for bioprinting applications. A central focus is placed on the rational design of photo‐crosslinkable bio‐inks, comprising functional monomers, photo‐initiators (PIs), and photo‐absorbers (PAs). We critically examine design criteria such as cytocompatibility, rheological and optical behavior, mechanical performance, degradation profiles, and scalability, highlighting the complex trade‐offs between print fidelity and biological function. The utility of VP‐based bioprinting is further illustrated through its application in constructing advanced tissues, including bone, cardiac, cartilage, corneal, and hepatic models. Finally, we explore emerging frontiers such as multi‐material and multi‐modal bioprinting, machine learning‐guided optimization, and regulatory pathways toward clinical translation. Collectively, these insights outline a roadmap for advancing VP‐based bioprinting into a clinically viable, high‐throughput tissue engineering technology.
- 6 January 2026
- Published by Wiley in Interdisciplinary Medicine
- Vol. 4 (1)
Top Cited PapersOpen AccessVat photopolymerization‐based bioprinting: Shaping next‐generation tissues with light
Vat photopolymerization (VP)‐based bioprinting is rapidly emerging as a transformative platform for fabricating complex, cell‐laden tissue constructs with unparalleled spatial resolution and geometric precision. This review presents a comprehensive overview of recent advances in VP‐based bioprinting, organized around core themes of photopolymerization chemistry, printing modalities, bio‐ink design, and biomedical applications. We first describe the underlying crosslinking mechanisms including chain‐growth, step‐growth, redox‐mediated, and initiator‐free systems that enable spatiotemporal control over polymerization. The discussion then moves to key VP‐based bioprinting techniques such as stereolithography apparatus (SLA), digital light processing, two‐photon polymerization, and volumetric additive manufacturing, emphasizing their printing principles and suitability for bioprinting applications. A central focus is placed on the rational design of photo‐crosslinkable bio‐inks, comprising functional monomers, photo‐initiators (PIs), and photo‐absorbers (PAs). We critically examine design criteria such as cytocompatibility, rheological and optical behavior, mechanical performance, degradation profiles, and scalability, highlighting the complex trade‐offs between print fidelity and biological function. The utility of VP‐based bioprinting is further illustrated through its application in constructing advanced tissues, including bone, cardiac, cartilage, corneal, and hepatic models. Finally, we explore emerging frontiers such as multi‐material and multi‐modal bioprinting, machine learning‐guided optimization, and regulatory pathways toward clinical translation. Collectively, these insights outline a roadmap for advancing VP‐based bioprinting into a clinically viable, high‐throughput tissue engineering technology.
- Open Access
Light-Mediated 3D-Printed Wound Dressings Based on Natural Polymers with Improved Adhesion and Antioxidant Properties
The lack of personalized wound dressings tailored to individual needs can significantly hinder wound healing. Hydrogels offer a promising solution, as they can be engineered to mimic the extracellular matrix (ECM), providing an optimal environment for wound repair. The integration of digital light processing (DLP), a high-resolution 3D printing process, allows precise customization of hydrogel-based wound dressings. In this study, gelatin methacrylate (GelMA)-based formulations were prepared in combination with three different polymeric precursors: methacrylated hyaluronic acid (HAMA), poly (ethylene glycol) diacrylate (PEGDA) and allyl cellulose (MCCA). These precursors were used to print high-resolution micropatterned patches. The printed constructs revealed a high gel content and a good resistance to hydrolytic degradation. To improve the adhesive and antioxidant properties of the printed patches, gallic acid (GA) was incorporated through surface functionalization. This enabled the scavenging of approximately 80% of free radicals within just 4 h. The adhesive properties of the printed wound dressings were also significantly improved, with further enhancement observed upon the addition of Fe3+ ions. In vitro cytocompatibility tests using a fibroblast (NHDF) cell line confirmed the suitability of the materials for biomedical applications. Thus, this study demonstrates the potential of DLP-printed hydrogels as advanced personalized wound dressing materials.
Open AccessLight-Mediated 3D-Printed Wound Dressings Based on Natural Polymers with Improved Adhesion and Antioxidant Properties
The lack of personalized wound dressings tailored to individual needs can significantly hinder wound healing. Hydrogels offer a promising solution, as they can be engineered to mimic the extracellular matrix (ECM), providing an optimal environment for wound repair. The integration of digital light processing (DLP), a high-resolution 3D printing process, allows precise customization of hydrogel-based wound dressings. In this study, gelatin methacrylate (GelMA)-based formulations were prepared in combination with three different polymeric precursors: methacrylated hyaluronic acid (HAMA), poly (ethylene glycol) diacrylate (PEGDA) and allyl cellulose (MCCA). These precursors were used to print high-resolution micropatterned patches. The printed constructs revealed a high gel content and a good resistance to hydrolytic degradation. To improve the adhesive and antioxidant properties of the printed patches, gallic acid (GA) was incorporated through surface functionalization. This enabled the scavenging of approximately 80% of free radicals within just 4 h. The adhesive properties of the printed wound dressings were also significantly improved, with further enhancement observed upon the addition of Fe3+ ions. In vitro cytocompatibility tests using a fibroblast (NHDF) cell line confirmed the suitability of the materials for biomedical applications. Thus, this study demonstrates the potential of DLP-printed hydrogels as advanced personalized wound dressing materials.
- Open Access
- 21 February 2025
- Published by Elsevier in International Journal of Biological Macromolecules
- Vol. 306 (Pt 1) , 141389
All-cellulose resin for 3D printing hydrogels via digital light processing (DLP)
- 21 February 2025
- Published by Elsevier in International Journal of Biological Macromolecules
- Vol. 306 (Pt 1) , 141389
Open AccessAll-cellulose resin for 3D printing hydrogels via digital light processing (DLP)
- Open Access
Tackling the Problem of Tendon Adhesions: Physical Barriers Prepared from α-Amino Acid-Based Poly(ester amide)s
In this work, electrospun membranes of α-amino acid based poly(ester amide)s (AAA-PEAs) from L-alanine (PEA_ala) or L-phenylalanine (PEA_phe) were successfully prepared to be used as physical barriers in the orthopedic field. Also, blends of these two polymers were used in different weight ratios (25:75, 50:50 and 75:25) to obtain physical barriers with different properties. All membranes had a suitable pore size to prevent fibroblast infiltration, and their porosity and permeability values were in a range that allowed the passage of nutrients. The membrane made from a blend of 25%wt of PEA_ala and 75% wt of PEA_phe showed the highest value of swelling capacity, suggesting a higher lubricant feature. The same membrane suffered a more pronounced degradation, as evidenced by the in vitro enzymatic degradation tests. All membranes showed suitable toughness values, a crucial property with regard to application. In vitro cytotoxicity tests performed with a NIH3T3 fibroblast cell line revealed decreased cell viability after 7 days, suggesting that these membranes are not ideal substrates to promote fibroblast adhesion and proliferation. These membranes as physical barriers represent a significant advance in the field given the limited literature on electrospun AAA-PEAs and their use to prevent tendon adhesion.
Open AccessTackling the Problem of Tendon Adhesions: Physical Barriers Prepared from α-Amino Acid-Based Poly(ester amide)s
In this work, electrospun membranes of α-amino acid based poly(ester amide)s (AAA-PEAs) from L-alanine (PEA_ala) or L-phenylalanine (PEA_phe) were successfully prepared to be used as physical barriers in the orthopedic field. Also, blends of these two polymers were used in different weight ratios (25:75, 50:50 and 75:25) to obtain physical barriers with different properties. All membranes had a suitable pore size to prevent fibroblast infiltration, and their porosity and permeability values were in a range that allowed the passage of nutrients. The membrane made from a blend of 25%wt of PEA_ala and 75% wt of PEA_phe showed the highest value of swelling capacity, suggesting a higher lubricant feature. The same membrane suffered a more pronounced degradation, as evidenced by the in vitro enzymatic degradation tests. All membranes showed suitable toughness values, a crucial property with regard to application. In vitro cytotoxicity tests performed with a NIH3T3 fibroblast cell line revealed decreased cell viability after 7 days, suggesting that these membranes are not ideal substrates to promote fibroblast adhesion and proliferation. These membranes as physical barriers represent a significant advance in the field given the limited literature on electrospun AAA-PEAs and their use to prevent tendon adhesion.
- 14 September 2019
- Published by Springer Nature in European Journal of Wood and Wood Products
- Vol. 77 (6) , 1095-1106
The impact of the introduction of hydrolyzed cellulose on the thermal and mechanical properties of LDPE composites
- 14 September 2019
- Published by Springer Nature in European Journal of Wood and Wood Products
- Vol. 77 (6) , 1095-1106
The impact of the introduction of hydrolyzed cellulose on the thermal and mechanical properties of LDPE composites
- 18 September 2014
- Published by Wiley in Chemistry – A European Journal
- Vol. 20 (45) , 14834-14845
A Bis(pyridine N‐oxide) Analogue of DOTA: Relaxometric Properties of the GdIII Complex and Efficient Sensitization of Visible and NIR‐Emitting Lanthanide(III) Cations Including PrIII and HoIII
We report the synthesis of a cyclen‐based ligand (4,10‐bis[(1‐oxidopyridin‐2‐yl)methyl]‐1,4,7,10‐tetraazacyclododecane‐1,7‐diacetic acid=L1) containing two acetate and two 2‐methylpyridine N‐oxide arms anchored on the nitrogen atoms of the cyclen platform, which has been designed for stable complexation of lanthanide(III) ions in aqueous solution. Relaxometric studies suggest that the thermodynamic stability and kinetic inertness of the GdIII complex may be sufficient for biological applications. A detailed structural study of the complexes by 1H NMR spectroscopy and DFT calculations indicates that they adopt an anti‐Δ(λλλλ) conformation in aqueous solution, that is, an anti‐square antiprismatic (anti‐SAP) isomeric form, as demonstrated by analysis of the 1H NMR paramagnetic shifts induced by YbIII. The water‐exchange rate of the GdIII complex is ${k{{298\hfill \atop {\rm ex}\hfill}}}$ =6.7×106 s−1, about a quarter of that for the mono‐oxidopyridine analogue, but still about 50 % higher than the ${k{{298\hfill \atop {\rm ex}\hfill}}}$ of GdDOTA (DOTA=1,4,7,10‐tetraazacyclododecane‐1,4,7,10‐tetraacetic acid). The 2‐methylpyridine N‐oxide chromophores can be used to sensitize a wide range of LnIII ions emitting in both the visible (EuIII and TbIII) and NIR (PrIII, NdIII, HoIII, YbIII) spectral regions. The emission quantum yield determined for the YbIII complex (${Q{{{\rm L}\hfill \atop {\rm Yb}\hfill}}}$ =7.3(1)×10−3) is among the highest ever reported for complexes of this metal ion in aqueous solution. The sensitization ability of the ligand, together with the spectroscopic and relaxometric properties of its complexes, constitute a useful step forward on the way to efficient dual probes for optical imaging (OI) and MRI.- 18 September 2014
- Published by Wiley in Chemistry – A European Journal
- Vol. 20 (45) , 14834-14845
A Bis(pyridine N‐oxide) Analogue of DOTA: Relaxometric Properties of the GdIII Complex and Efficient Sensitization of Visible and NIR‐Emitting Lanthanide(III) Cations Including PrIII and HoIII
We report the synthesis of a cyclen‐based ligand (4,10‐bis[(1‐oxidopyridin‐2‐yl)methyl]‐1,4,7,10‐tetraazacyclododecane‐1,7‐diacetic acid=L1) containing two acetate and two 2‐methylpyridine N‐oxide arms anchored on the nitrogen atoms of the cyclen platform, which has been designed for stable complexation of lanthanide(III) ions in aqueous solution. Relaxometric studies suggest that the thermodynamic stability and kinetic inertness of the GdIII complex may be sufficient for biological applications. A detailed structural study of the complexes by 1H NMR spectroscopy and DFT calculations indicates that they adopt an anti‐Δ(λλλλ) conformation in aqueous solution, that is, an anti‐square antiprismatic (anti‐SAP) isomeric form, as demonstrated by analysis of the 1H NMR paramagnetic shifts induced by YbIII. The water‐exchange rate of the GdIII complex is ${k{{298\hfill \atop {\rm ex}\hfill}}}$ =6.7×106 s−1, about a quarter of that for the mono‐oxidopyridine analogue, but still about 50 % higher than the ${k{{298\hfill \atop {\rm ex}\hfill}}}$ of GdDOTA (DOTA=1,4,7,10‐tetraazacyclododecane‐1,4,7,10‐tetraacetic acid). The 2‐methylpyridine N‐oxide chromophores can be used to sensitize a wide range of LnIII ions emitting in both the visible (EuIII and TbIII) and NIR (PrIII, NdIII, HoIII, YbIII) spectral regions. The emission quantum yield determined for the YbIII complex (${Q{{{\rm L}\hfill \atop {\rm Yb}\hfill}}}$ =7.3(1)×10−3) is among the highest ever reported for complexes of this metal ion in aqueous solution. The sensitization ability of the ligand, together with the spectroscopic and relaxometric properties of its complexes, constitute a useful step forward on the way to efficient dual probes for optical imaging (OI) and MRI.