Andrzej Mazur
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Andrzej Mazur has a total of 51 co-authors. Here are the top co-authors by number of shared publications:
- Radomir Obroślak
Univ Life Sci Lublin, Dept Environm Engn & Geodesy, Ul Leszczynskiego 7, PL-20069 Lublin, Poland
10 shared publications - Alina Kowalczyk-Juśko
University of Life Sciences in Lublin
9 shared publications - Antoni Grzywna
Univ Life Sci Lublin, Dept Environm Engn & Geodesy, Leszczynskiego 7, PL-20069 Lublin, Poland
7 shared publications - Krzysztof Jóźwiakowski
Department of Environmental Engineering, University of Life Sciences in Lublin, Leszczyńskiego 7, 20-069 Lublin, Poland
5 shared publications - Roman Rybicki
Univ Life Sci Lublin, Dept Environm Engn & Geodesy, Ul Leszczynskiego 7, PL-20069 Lublin, Poland
5 shared publications - Kamil Nieścioruk
University of Life Sciences in Lublin , Department of Geodesy and Spatial Information Faculty of Production Engineering , Lublin , Poland
4 shared publications
Latest Publications
- Open Access
- 1 November 2026
- Published by WNGB Scientific Publishing House Sp. z o.o. in Journal of Ecological Engineering
- Vol. 27 (11) , 507-522
The impact of hydropower on the riverbed processes of the Middle Dniester
The article examines the impact of hydropower on channel processes and landscape changes of the Middle Dniester within the canyon section. Both positive aspects of hydropower development are analyzed, in particular its role as a renewable energy source and a tool for water resource regulation, as...
- 1 November 2026
- Published by WNGB Scientific Publishing House Sp. z o.o. in Journal of Ecological Engineering
- Vol. 27 (11) , 507-522
Open AccessThe impact of hydropower on the riverbed processes of the Middle Dniester
The article examines the impact of hydropower on channel processes and landscape changes of the Middle Dniester within the canyon section. Both positive aspects of hydropower development are analyzed, in particular its role as a renewable energy source and a tool for water resource regulation, as...
- Open Access
- 1 June 2025
- Published by Wydawnictwo Naukowe Gabriel Borowski (WNGB) in Advances in Science and Technology Research Journal
- Vol. 19 (6) , 131-139
Method of photogrammetric processing of scanning electron microscope – images for research of soil microsurfaces
The paper presents the method of photogrammetric processing of SEM images and the results of its application to determine the spatial coordinates of the points of the microsoil of the forest soil by measuring their SEM images, obtained on SEM "Hitachi" S800 with a magnification of...
- 1 June 2025
- Published by Wydawnictwo Naukowe Gabriel Borowski (WNGB) in Advances in Science and Technology Research Journal
- Vol. 19 (6) , 131-139
Open AccessMethod of photogrammetric processing of scanning electron microscope – images for research of soil microsurfaces
The paper presents the method of photogrammetric processing of SEM images and the results of its application to determine the spatial coordinates of the points of the microsoil of the forest soil by measuring their SEM images, obtained on SEM "Hitachi" S800 with a magnification of...
- Open Access
Energetic Potential of Tobacco Waste Within Combustion or Anaerobic Digestion
The growing demand for energy biomass encourages the use of waste and by-products from agriculture. The aim of this study was to assess the suitability of tobacco stalks (TSs) for energy use in the combustion and anaerobic digestion (AD) process, as well as the technical and environmental effects of energy production from this waste raw material. Laboratory tests were conducted on the energy parameters of TS biomass, the chemical composition of ash from its combustion, and the efficiency and composition of biogas generated during the AD process of TS silage with various silage additives. The tests were conducted in accordance with the standards applicable to biomass fuels. The energy yield and emission reduction obtained by the replacement of conventional energy sources were calculated. The energy parameters of TS were inferior compared to the raw materials most often burned in boilers (wood, straw). The high ash content (7.31% in dry mass) and its chemical composition may adversely affect heating devices. Methane yield from TS silage was lower (18.55–24.67 m3/Mg FM) than from silage from crops grown for biogas plants (i.e., 105 m3/Mg for maize silage). Silage additives improved TS silage quality and methane yield (from 18.55 to 21.71–24.67 m3 CH4/Mg in case of silages with additives. Energy yield and emission reduction were higher in the case of TS combustion, but AD is a process consistent with the circular economy. Both TS energy management processes are in line with the Sustainable Development Goals as they prevent the devaluation of agricultural waste, providing a valuable resource for bioenergy.
Open AccessEnergetic Potential of Tobacco Waste Within Combustion or Anaerobic Digestion
The growing demand for energy biomass encourages the use of waste and by-products from agriculture. The aim of this study was to assess the suitability of tobacco stalks (TSs) for energy use in the combustion and anaerobic digestion (AD) process, as well as the technical and environmental effects of energy production from this waste raw material. Laboratory tests were conducted on the energy parameters of TS biomass, the chemical composition of ash from its combustion, and the efficiency and composition of biogas generated during the AD process of TS silage with various silage additives. The tests were conducted in accordance with the standards applicable to biomass fuels. The energy yield and emission reduction obtained by the replacement of conventional energy sources were calculated. The energy parameters of TS were inferior compared to the raw materials most often burned in boilers (wood, straw). The high ash content (7.31% in dry mass) and its chemical composition may adversely affect heating devices. Methane yield from TS silage was lower (18.55–24.67 m3/Mg FM) than from silage from crops grown for biogas plants (i.e., 105 m3/Mg for maize silage). Silage additives improved TS silage quality and methane yield (from 18.55 to 21.71–24.67 m3 CH4/Mg in case of silages with additives. Energy yield and emission reduction were higher in the case of TS combustion, but AD is a process consistent with the circular economy. Both TS energy management processes are in line with the Sustainable Development Goals as they prevent the devaluation of agricultural waste, providing a valuable resource for bioenergy.
- Open Access
- 3 October 2022
- Published by Uniwersytet Mikolaja Kopernika/Nicolaus Copernicus University in Ecological Questions
- Vol. 34 (1)
Investigation in Techniques for Using Sewage Sludge as an Energy Feedstock: Poland’s Experience
The sludge generated from wastewater treatment facilities contains high nutrients and is characterized by high heating values. Thus, the sludge enriched with organic matter and nutrients is a potential candidate for its application as fertilizers and an alternate energy feedstock. Nowadays, energy independence contributes to the economic stability of the country, and therefore the search for alternate energy sources is an acute issue. This paper presents a case study on using sewage sludge as an energy feedstock in Poland. The physicochemical characteristics of the sewage sludge are presented. The fuel properties of sewage sludge generated from different waste water treatment plant (WWTP) are summarized. The calorific value of sewage sludge generated in Poland is insufficient for effective use as an energy raw material, therefore, energy potential of mixture of sludge with other waste have been studied. The general trend of sewage sludge formation and the quantitative forecast for the future showed that in 2020, compared to 2012, sludge accumulation increased by 6.9%, but compared to 2019 - decreased by 3%. From 2012 to 2020 the average, sewage sludge accumulation increased annually by 0.8%. This demonstrates the heterogeneity of waste streams for the production of alternative fuels and a modest increase in sewage sludge production in the coming years. This made it possible to prepare several options for the further development of research in the field of developing technologies for obtaining alternative energy. Also this study will help the prospective researchers understand sewage sludge generation and its use as energy feedstock.
- 3 October 2022
- Published by Uniwersytet Mikolaja Kopernika/Nicolaus Copernicus University in Ecological Questions
- Vol. 34 (1)
Open AccessInvestigation in Techniques for Using Sewage Sludge as an Energy Feedstock: Poland’s Experience
The sludge generated from wastewater treatment facilities contains high nutrients and is characterized by high heating values. Thus, the sludge enriched with organic matter and nutrients is a potential candidate for its application as fertilizers and an alternate energy feedstock. Nowadays, energy independence contributes to the economic stability of the country, and therefore the search for alternate energy sources is an acute issue. This paper presents a case study on using sewage sludge as an energy feedstock in Poland. The physicochemical characteristics of the sewage sludge are presented. The fuel properties of sewage sludge generated from different waste water treatment plant (WWTP) are summarized. The calorific value of sewage sludge generated in Poland is insufficient for effective use as an energy raw material, therefore, energy potential of mixture of sludge with other waste have been studied. The general trend of sewage sludge formation and the quantitative forecast for the future showed that in 2020, compared to 2012, sludge accumulation increased by 6.9%, but compared to 2019 - decreased by 3%. From 2012 to 2020 the average, sewage sludge accumulation increased annually by 0.8%. This demonstrates the heterogeneity of waste streams for the production of alternative fuels and a modest increase in sewage sludge production in the coming years. This made it possible to prepare several options for the further development of research in the field of developing technologies for obtaining alternative energy. Also this study will help the prospective researchers understand sewage sludge generation and its use as energy feedstock.
- Open Access
Evaluation of the Effects of Using the Giant Miscanthus (Miscanthus × Giganteus) Biomass in Various Energy Conversion Processes
The giant miscanthus (Miscanthus × giganteus) is one of the most essential energy plants. It also finds various alternative uses, including installing belts to prevent soil erosion. Biomass from such belts should be removed and rationally managed every year. The parameters of miscanthus biomass were investigated in terms of its suitability for combustion and anaerobic fermentation. Under the conditions of the experiment, miscanthus achieved a stable yield already in the second year of vegetation, mainly due to the high planting density. Energy parameters turned out to be typical for straw biomass (calorific value 18.06 MJ/kg). Relatively low ash melting temperatures (<1400 °C) and their chemical composition meant a high risk of contamination depositing on heating devices, which is often indicated as a shortcoming of biomass compared to hard coal. Miscanthus silage can be a valuable substrate for anaerobic digestion, but it requires a sufficiently early harvest, which affects the yield of biomass. The yield of energy in biomass obtained after drying plants was 163,623.6 MJ/ha. In contrast, the yield of energy from biomass collected in summer and processed into biomethane was much lower and amounted to 72,978.2 MJ/ha.
Open AccessEvaluation of the Effects of Using the Giant Miscanthus (Miscanthus × Giganteus) Biomass in Various Energy Conversion Processes
The giant miscanthus (Miscanthus × giganteus) is one of the most essential energy plants. It also finds various alternative uses, including installing belts to prevent soil erosion. Biomass from such belts should be removed and rationally managed every year. The parameters of miscanthus biomass were investigated in terms of its suitability for combustion and anaerobic fermentation. Under the conditions of the experiment, miscanthus achieved a stable yield already in the second year of vegetation, mainly due to the high planting density. Energy parameters turned out to be typical for straw biomass (calorific value 18.06 MJ/kg). Relatively low ash melting temperatures (<1400 °C) and their chemical composition meant a high risk of contamination depositing on heating devices, which is often indicated as a shortcoming of biomass compared to hard coal. Miscanthus silage can be a valuable substrate for anaerobic digestion, but it requires a sufficiently early harvest, which affects the yield of biomass. The yield of energy in biomass obtained after drying plants was 163,623.6 MJ/ha. In contrast, the yield of energy from biomass collected in summer and processed into biomethane was much lower and amounted to 72,978.2 MJ/ha.
- Open Access
The Assessment of the Usefulness of Miscanthus x giganteus to Water and Soil Protection against Erosive Degradation
Water erosion is one of the major factors of soil degradation in the world. Various methods have been developed to prevent soil erosion. One of them is the use of anti-erosion belts on slopes, but it has both positive and negative effects. In order to minimize the negative effects, this study proposes the use of perennial grass in place of the most commonly used trees and shrubs. The paper presents studies on the erosion control effectiveness of a strip planted with Miscanthus x giganteus, established on a loess slope. Surface runoff of water and its constituents and erosion damage was studied on the experimental plot with a separate anti-erosion belt and the control plot. Obtained results indicate the anti-erosion efficiency of the established strip in the context of soil protection from water erosion and surface water protection from pollution, although, in the first years of vegetation, miscanthus has not yet reached the stage of full development. The average surface water runoff relating to precipitation causing the erosive event was 17.1% higher in the control plot than in the experimental plot. The volume of erosion damage in the form of rill erosion was 89.3% higher in the control plot. On the other hand, the volume of erosion damages in surface erosion and patches of deposited silts was lower by 14.7% and 21.6%, respectively. Soil losses from the control plot were 29% higher than those from the experimental plot. Dissolved plant nutrient runoff was also higher from the control plot by: 33.4% N-Ntot, 31.3% N-NH4, 42.7% N-NO3, 21.6% N-NO2, 22.9% P-Ptot, 24.1% K.
Open AccessThe Assessment of the Usefulness of Miscanthus x giganteus to Water and Soil Protection against Erosive Degradation
Water erosion is one of the major factors of soil degradation in the world. Various methods have been developed to prevent soil erosion. One of them is the use of anti-erosion belts on slopes, but it has both positive and negative effects. In order to minimize the negative effects, this study proposes the use of perennial grass in place of the most commonly used trees and shrubs. The paper presents studies on the erosion control effectiveness of a strip planted with Miscanthus x giganteus, established on a loess slope. Surface runoff of water and its constituents and erosion damage was studied on the experimental plot with a separate anti-erosion belt and the control plot. Obtained results indicate the anti-erosion efficiency of the established strip in the context of soil protection from water erosion and surface water protection from pollution, although, in the first years of vegetation, miscanthus has not yet reached the stage of full development. The average surface water runoff relating to precipitation causing the erosive event was 17.1% higher in the control plot than in the experimental plot. The volume of erosion damage in the form of rill erosion was 89.3% higher in the control plot. On the other hand, the volume of erosion damages in surface erosion and patches of deposited silts was lower by 14.7% and 21.6%, respectively. Soil losses from the control plot were 29% higher than those from the experimental plot. Dissolved plant nutrient runoff was also higher from the control plot by: 33.4% N-Ntot, 31.3% N-NH4, 42.7% N-NO3, 21.6% N-NO2, 22.9% P-Ptot, 24.1% K.
- Open Access
- 1 February 2021
- Published by Wydawnictwo Naukowe Gabriel Borowski (WNGB) in Journal of Ecological Engineering
- Vol. 22 (2) , 213-225
Comparison of Free and Commercial Software in the Processing of Data Obtained from Non-Metric Cameras
The main goal of the work was an attempt to compare the free and commercial photogrammetry software for processing pictures taken with a camera drone, a traditional digital camera and a smartphone. Due to a wide range of programs on the market, four were selected for comparison (Agisoft...
- 1 February 2021
- Published by Wydawnictwo Naukowe Gabriel Borowski (WNGB) in Journal of Ecological Engineering
- Vol. 22 (2) , 213-225
Open AccessComparison of Free and Commercial Software in the Processing of Data Obtained from Non-Metric Cameras
The main goal of the work was an attempt to compare the free and commercial photogrammetry software for processing pictures taken with a camera drone, a traditional digital camera and a smartphone. Due to a wide range of programs on the market, four were selected for comparison (Agisoft...
- Open Access
- 1 November 2020
- Published by Wydawnictwo Naukowe Gabriel Borowski (WNGB) in Journal of Ecological Engineering
- Vol. 21 (8) , 156-162
Estimation of Potential of Agriculture Biogas Production in Biała Podlaska County (Poland)
By analyzing the Biała Podlaska County resources of the economic infrastructure (distilleries, diaries, fruit and vegetable processing and meat processing factories), the possibilities of the biomass obtaining and creating the biogas plants basing on the agri-food industry waste, were estimated....
- 1 November 2020
- Published by Wydawnictwo Naukowe Gabriel Borowski (WNGB) in Journal of Ecological Engineering
- Vol. 21 (8) , 156-162
Open AccessEstimation of Potential of Agriculture Biogas Production in Biała Podlaska County (Poland)
By analyzing the Biała Podlaska County resources of the economic infrastructure (distilleries, diaries, fruit and vegetable processing and meat processing factories), the possibilities of the biomass obtaining and creating the biogas plants basing on the agri-food industry waste, were estimated....
- Open Access
- 1 April 2020
- Published by Wydawnictwo Naukowe Gabriel Borowski (WNGB) in Journal of Ecological Engineering
- Vol. 21 (3) , 180-185
Effect of Unitary Soil Tillage Energy on Soil Aggregate Structure and Erosion Vulnerability
The integrated soil tillage developed in the Institute of Biosystem Engineering is based on a single pass of basic tillage, secondary tillage and sowing or planting. The integrated soil tillage enables to achieve a relatively high mechanical strength of the soil. An important element of the technology is the use of tillage roller sets which significantly influence the obtained aggregate structure and its eolic resistance. The aim of the study was to determine the influence of roller speed under various soil moisture conditions on the aggregate structure of the arable soil layer. The research was carried out on the production field in Dziecmierowo, Wielkopolska Voivodeship, Poland, on medium soil with the mechanical composition of light clay. During the research, cultivation sets with two units of Campell + Croskill platelet and studded rollers were used. For two actual soil moisture levels and five speeds within the range of 3-7 km/h, the influence of unit tillage energy at three levels of the cultivating layer (0-5 cm, 5-10 cm and 10-15 cm) was analyzed on the aggregate structure of soil and the content of aggregates with the highest resistance to wind erosion. The results of the work lead to the conclusions that it is possible to use the working speed and overloading of rollers set in integrated soil tillage trailer to manipulate the process of forming an optimal, erosion-resistant soil layer. However, it should be pointed out that for even very similar types of roller sets, the process control under different soil moisture conditions may be different and require an individual test.
- 1 April 2020
- Published by Wydawnictwo Naukowe Gabriel Borowski (WNGB) in Journal of Ecological Engineering
- Vol. 21 (3) , 180-185
Open AccessEffect of Unitary Soil Tillage Energy on Soil Aggregate Structure and Erosion Vulnerability
The integrated soil tillage developed in the Institute of Biosystem Engineering is based on a single pass of basic tillage, secondary tillage and sowing or planting. The integrated soil tillage enables to achieve a relatively high mechanical strength of the soil. An important element of the technology is the use of tillage roller sets which significantly influence the obtained aggregate structure and its eolic resistance. The aim of the study was to determine the influence of roller speed under various soil moisture conditions on the aggregate structure of the arable soil layer. The research was carried out on the production field in Dziecmierowo, Wielkopolska Voivodeship, Poland, on medium soil with the mechanical composition of light clay. During the research, cultivation sets with two units of Campell + Croskill platelet and studded rollers were used. For two actual soil moisture levels and five speeds within the range of 3-7 km/h, the influence of unit tillage energy at three levels of the cultivating layer (0-5 cm, 5-10 cm and 10-15 cm) was analyzed on the aggregate structure of soil and the content of aggregates with the highest resistance to wind erosion. The results of the work lead to the conclusions that it is possible to use the working speed and overloading of rollers set in integrated soil tillage trailer to manipulate the process of forming an optimal, erosion-resistant soil layer. However, it should be pointed out that for even very similar types of roller sets, the process control under different soil moisture conditions may be different and require an individual test.
- Open Access
- 1 December 2019
- Published by Wydawnictwo Naukowe Gabriel Borowski (WNGB) in Journal of Ecological Engineering
- Vol. 20 (11) , 210-216
The Assessment of the Amount of Soil Material Deposited on the Bottom of a Dry Erosive-Denudation Valley
The work presents the results of research on erosion and landform changes of a bottom of a dry erosive-accumulation valley in Elizówka in 1958, 1970 and 2016. The changes have been examined with the use of geodetic topographic surveys techniques. The research field was a 480-metres long part of...
- 1 December 2019
- Published by Wydawnictwo Naukowe Gabriel Borowski (WNGB) in Journal of Ecological Engineering
- Vol. 20 (11) , 210-216
Open AccessThe Assessment of the Amount of Soil Material Deposited on the Bottom of a Dry Erosive-Denudation Valley
The work presents the results of research on erosion and landform changes of a bottom of a dry erosive-accumulation valley in Elizówka in 1958, 1970 and 2016. The changes have been examined with the use of geodetic topographic surveys techniques. The research field was a 480-metres long part of...