Natalie Hanrieder
Research Subjects
Natalie Hanrieder has a total of 44 co-authors. Here are the top co-authors by number of shared publications:
- Jesús Polo
Solar PV Unit, Department of Energy, CIEMAT, Avda. Complutense 40, 28040 Madrid, Spain
4 shared publications - Luis Fernando Zarzalejo
Renewable Energy Division, Centro de Investigaciones Energéticas Medioambientales y Tecnológicas (CIEMAT), Avda. Complutense 40, 28040 Madrid, Spain
3 shared publications - Stefan Wilbert
German Aerospace Center (DLR), Institute of Solar Research, Calle Doctor Carracido 44, 04005 Almería, Spain
3 shared publications - Álvaro Fernández Solas
German Aerospace Center (DLR), Institute of Solar Research
3 shared publications - Leonardo Micheli
Department of Astronautical, Electrical and Energy Engineering (DIAEE), Sapienza University of Rome, 00184 Rome, Italy
2 shared publications A. Esquelli
Berlin University of Technology, Renewable Energy Systems 2 , Straße des 17. Juni 135, 10623 Berlin, Germany
1 shared publication
Latest Publications
- Open Access
- 10 July 2026
- Published by Elsevier in Solar Energy
- Vol. 316
Monitoring and assessment of elevated agrivoltaic systems in southern Spain
- 10 July 2026
- Published by Elsevier in Solar Energy
- Vol. 316
Open AccessMonitoring and assessment of elevated agrivoltaic systems in southern Spain
- Open Access
- 24 April 2026
- Published by Wiley in Advanced Energy and Sustainability Research
- Vol. 7 (4)
Agrivoltaic System Potential to Mitigate Effects of Climate Change in Viticulture
Viticulture already faces several climate‐related risks, which will be even more severe in the future. If Agrivoltaics (APV) can help to mitigate challenges associated to climate change still has to be investigated. To address this, we analyze historical meteorological data, onsite measurements, and climate projections to summarize the effect of climate change on wine yield for two wine‐growing sites: Hatzenport, Germany, and Laujar, Spain. We compare projected ambient temperature, precipitation, and global horizontal irradiance to the effects of various APV installations on these parameters. Since 1970, temperatures at both locations have risen by about 2.5°C, and future scenarios show further warming, especially in Hatzenport, where average yearly temperatures are predicted to increase up to 5.8°C under 8.5 W m −2 radiative forcing until 2100. The climate projections indicate that heat waves and droughts are increasingly likely to occur in Laujar by 2100. Phenological stages might occur about 10–20 days earlier in the year 2100, which increases the risk of hail damage and shortened dormancy periods. APV systems have the potential to mitigate those risks by providing protection for the crops, improving microclimate below the photovoltaic modules by reducing air and soil temperatures, and simultaneously generating renewable energy on agricultural land.
- 24 April 2026
- Published by Wiley in Advanced Energy and Sustainability Research
- Vol. 7 (4)
Open AccessAgrivoltaic System Potential to Mitigate Effects of Climate Change in Viticulture
Viticulture already faces several climate‐related risks, which will be even more severe in the future. If Agrivoltaics (APV) can help to mitigate challenges associated to climate change still has to be investigated. To address this, we analyze historical meteorological data, onsite measurements, and climate projections to summarize the effect of climate change on wine yield for two wine‐growing sites: Hatzenport, Germany, and Laujar, Spain. We compare projected ambient temperature, precipitation, and global horizontal irradiance to the effects of various APV installations on these parameters. Since 1970, temperatures at both locations have risen by about 2.5°C, and future scenarios show further warming, especially in Hatzenport, where average yearly temperatures are predicted to increase up to 5.8°C under 8.5 W m −2 radiative forcing until 2100. The climate projections indicate that heat waves and droughts are increasingly likely to occur in Laujar by 2100. Phenological stages might occur about 10–20 days earlier in the year 2100, which increases the risk of hail damage and shortened dormancy periods. APV systems have the potential to mitigate those risks by providing protection for the crops, improving microclimate below the photovoltaic modules by reducing air and soil temperatures, and simultaneously generating renewable energy on agricultural land.
- Open Access
- 24 April 2026
- Published by EDP Sciences in EPJ Photovoltaics
- Vol. 17, 17
Maps of long-term soiling losses in Europe considering a partial cleaning effect by rain
The soiling of PV modules has been estimated to yield global losses in the solar energy production by 4 to 7%, even considering the cleaning efforts in many solar energy systems. Despite this, soiling measurements are not always available, making models particularly valuable for estimating these losses. However, soiling models currently present two limitations: most of them assume that daily rain accumulations higher than a threshold value can totally clean PV modules and, additionally, that rain will have the same washing effect on all types of soiling, independently of their higher or lower adherent properties. In this work, the HSU model (Coello and Boyle, 2019) is modified to include the two aforementioned effects. The original and modified HSU models are then calibrated for two locations in Africa where observations of long-term soiling losses were available. At the first considered location, the predominant soiling type was mainly washable by rain but showed the partial cleaning effects, while at the second location, despite the frequent and abundant rainfall, the build-up of persistent soiling was observed. The calibrated parameters for the original and modified HSU models were then applied to reanalysis meteorological 2-dimensional input data to estimate the associated soiling losses in Europe for a 20-yr operation without any artificial cleaning. The application of model parameters derived for the African sites for Europe is considered to be valid for the demonstration of the method and delivers exemplary results that might also occur for soiling types found at some European sites. The derived different soiling maps should, however, not be understood as the most likely possible values for European soiling. When considering the exemplary removable soiling type, the original HSU model underestimates on average the European soiling losses by a factor of 4 compared to the estimations of the modified HSU model. When considering the exemplary persistent soiling type, the European soiling losses estimated with the modified HSU model are on average 5.5 times larger than those estimated with the original HSU model. Additionally, the European soiling losses estimated with the modified HSU model considering a persistent soiling type are 2.4 times larger than those considering a removable soiling type, which highlights not only the importance of properly modeling the soiling losses but also of choosing the correct soiling type. The results show that, at least for some soiling types, mechanical cleaning of the PV modules is necessary to avoid high soiling losses even in rainy regions such as Central Europe.
- 24 April 2026
- Published by EDP Sciences in EPJ Photovoltaics
- Vol. 17, 17
Open AccessMaps of long-term soiling losses in Europe considering a partial cleaning effect by rain
The soiling of PV modules has been estimated to yield global losses in the solar energy production by 4 to 7%, even considering the cleaning efforts in many solar energy systems. Despite this, soiling measurements are not always available, making models particularly valuable for estimating these losses. However, soiling models currently present two limitations: most of them assume that daily rain accumulations higher than a threshold value can totally clean PV modules and, additionally, that rain will have the same washing effect on all types of soiling, independently of their higher or lower adherent properties. In this work, the HSU model (Coello and Boyle, 2019) is modified to include the two aforementioned effects. The original and modified HSU models are then calibrated for two locations in Africa where observations of long-term soiling losses were available. At the first considered location, the predominant soiling type was mainly washable by rain but showed the partial cleaning effects, while at the second location, despite the frequent and abundant rainfall, the build-up of persistent soiling was observed. The calibrated parameters for the original and modified HSU models were then applied to reanalysis meteorological 2-dimensional input data to estimate the associated soiling losses in Europe for a 20-yr operation without any artificial cleaning. The application of model parameters derived for the African sites for Europe is considered to be valid for the demonstration of the method and delivers exemplary results that might also occur for soiling types found at some European sites. The derived different soiling maps should, however, not be understood as the most likely possible values for European soiling. When considering the exemplary removable soiling type, the original HSU model underestimates on average the European soiling losses by a factor of 4 compared to the estimations of the modified HSU model. When considering the exemplary persistent soiling type, the European soiling losses estimated with the modified HSU model are on average 5.5 times larger than those estimated with the original HSU model. Additionally, the European soiling losses estimated with the modified HSU model considering a persistent soiling type are 2.4 times larger than those considering a removable soiling type, which highlights not only the importance of properly modeling the soiling losses but also of choosing the correct soiling type. The results show that, at least for some soiling types, mechanical cleaning of the PV modules is necessary to avoid high soiling losses even in rainy regions such as Central Europe.
- Open Access
- 4 December 2024
- Published by Elsevier in Renewable Energy
- Vol. 239
Photovoltaic soiling loss in Europe: Geographical distribution and cleaning recommendations
- 4 December 2024
- Published by Elsevier in Renewable Energy
- Vol. 239
Open AccessPhotovoltaic soiling loss in Europe: Geographical distribution and cleaning recommendations
- 1 November 2021
- Published by Elsevier in Renewable Energy
- Vol. 178, 420-428
Modeling soiling losses for rooftop PV systems in suburban areas with nearby forest in Madrid
- 1 November 2021
- Published by Elsevier in Renewable Energy
- Vol. 178, 420-428
Modeling soiling losses for rooftop PV systems in suburban areas with nearby forest in Madrid
- 1 May 2021
- Published by AIP Publishing in Journal of Renewable and Sustainable Energy
- Vol. 13 (3) , 033703
Incidence angle and diffuse radiation adaptation of soiling ratio measurements of indirect optical soiling sensors
Soiling is responsible for a loss of 3%–4% of the potential global solar power production that is estimated to rise because of increased deployment in dusty environments [Ilse et al., Joule 3, 2303–2321 (2019)]. For effective mitigation strategies and site selection soiling ratio data is crucial. Soiling can be measured directly by comparing the power or short circuit current of a soiled PV cell or module to that of a clean photovoltaic (PV) device of the same model. In recent years, a number of indirect soiling sensors such as Kipp and Zonen's DustIQ and Atonometric's MARS were introduced. These sensors do not use PV cells to determine the soiling ratio. Indirect soiling sensors derive soiling based on information such as particle concentration and size. The soiling loss of PV systems shows a strong angle of incidence (AOI) dependent pattern for sunny conditions. This pattern is not reproduced by indirect sensors such as DustIQ and MARS. We developed a method to adapt the soiling measurement of indirect soiling sensors using the AOI and the Linke turbidity. The adaptation is based on an analysis of the AOI dependence of the reference cell-derived soiling ratio. Linke turbidity is derived from irradiance measurements. The method reduces the root mean square error between the soiling ratios detected by the DustIQ and a colocated pair of PV reference cells from 0.7% to 0.2%. It can improve cumulative performance calculations that use indirect soiling measurements as an input.
- 1 May 2021
- Published by AIP Publishing in Journal of Renewable and Sustainable Energy
- Vol. 13 (3) , 033703
Incidence angle and diffuse radiation adaptation of soiling ratio measurements of indirect optical soiling sensors
Soiling is responsible for a loss of 3%–4% of the potential global solar power production that is estimated to rise because of increased deployment in dusty environments [Ilse et al., Joule 3, 2303–2321 (2019)]. For effective mitigation strategies and site selection soiling ratio data is crucial. Soiling can be measured directly by comparing the power or short circuit current of a soiled PV cell or module to that of a clean photovoltaic (PV) device of the same model. In recent years, a number of indirect soiling sensors such as Kipp and Zonen's DustIQ and Atonometric's MARS were introduced. These sensors do not use PV cells to determine the soiling ratio. Indirect soiling sensors derive soiling based on information such as particle concentration and size. The soiling loss of PV systems shows a strong angle of incidence (AOI) dependent pattern for sunny conditions. This pattern is not reproduced by indirect sensors such as DustIQ and MARS. We developed a method to adapt the soiling measurement of indirect soiling sensors using the AOI and the Linke turbidity. The adaptation is based on an analysis of the AOI dependence of the reference cell-derived soiling ratio. Linke turbidity is derived from irradiance measurements. The method reduces the root mean square error between the soiling ratios detected by the DustIQ and a colocated pair of PV reference cells from 0.7% to 0.2%. It can improve cumulative performance calculations that use indirect soiling measurements as an input.