Sadik Caglar
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Sadik Caglar has a total of 2 co-authors. Here are the top co-authors by number of shared publications:
- Arif Oguz Altunel
Kastamonu University
1 shared publication - Tayyibe Altunel
Kastamonu University Faculty of Forestry, Department of Forest Engineering
1 shared publication
Latest Publications
- 1 July 2021
- Published by International Journal of Engineering and Geoscience in International Journal of Engineering and Geosciences
- Vol. 6 (2) , 104-116
Determining the habitat fragmentation thru geoscience capabilities in Turkey: A case study of wildlife refuges
Technical forest management started 180 years ago in Turkey, during which time there have been various approaches and policy changes. The primary objective of forestry has been considered as timber production, so the intangible benefits have never been given the proper attention they deserve. The majority of Turkey’s wildlife has prospered within the forest ecosystems. This situation has gradually led to a change of status, so some forests and land areas have been reassigned with the conservation agendas as the primary purpose; however timber production has never slowed down. Thus, operational forestry practices, such as roading, logging, etc., have kept on exploiting these lands to their full extent despite their conservation statuses. In Turkey and anywhere else, since forestry has always evolved around extracting the timber out of the forest lands, the accessibility has long been provided, building roads to take related services to forested ecosystems. The remnants of these roads, along with the more standardized new ones can be found everywhere, regardless of the land status. Such expansion has resulted in habitat fragmentation emerging as a major threat for the protected areas. In this study, the expansion of all-weather and dry-weather accessible roads and suburban spread was examined in two adjacent, Ilgaz and Gavurdagi, wildlife refuges for the years of 1960, 1993, 2010 and 2019, relying heavily on the mapping, geographic information systems (GIS) and remote sensing. It was found that 275.5 km dry-weather roads in 1960 rose to 700 km in 2017, which meant 254% increase. Additionally, when the core along with the surrounding 3000 m buffer area was considered, 51 km all-weather roads in 1960 increased almost four and a half times by 2019. Suburban expansion was relatively stable inside the core area but had almost quadrupled within the surrounding areas, exposing the refuges to more people. These findings indicated that the wildlife habitats of Turkey are fragmented and under heavy human pressure.
- 1 July 2021
- Published by International Journal of Engineering and Geoscience in International Journal of Engineering and Geosciences
- Vol. 6 (2) , 104-116
Determining the habitat fragmentation thru geoscience capabilities in Turkey: A case study of wildlife refuges
Technical forest management started 180 years ago in Turkey, during which time there have been various approaches and policy changes. The primary objective of forestry has been considered as timber production, so the intangible benefits have never been given the proper attention they deserve. The majority of Turkey’s wildlife has prospered within the forest ecosystems. This situation has gradually led to a change of status, so some forests and land areas have been reassigned with the conservation agendas as the primary purpose; however timber production has never slowed down. Thus, operational forestry practices, such as roading, logging, etc., have kept on exploiting these lands to their full extent despite their conservation statuses. In Turkey and anywhere else, since forestry has always evolved around extracting the timber out of the forest lands, the accessibility has long been provided, building roads to take related services to forested ecosystems. The remnants of these roads, along with the more standardized new ones can be found everywhere, regardless of the land status. Such expansion has resulted in habitat fragmentation emerging as a major threat for the protected areas. In this study, the expansion of all-weather and dry-weather accessible roads and suburban spread was examined in two adjacent, Ilgaz and Gavurdagi, wildlife refuges for the years of 1960, 1993, 2010 and 2019, relying heavily on the mapping, geographic information systems (GIS) and remote sensing. It was found that 275.5 km dry-weather roads in 1960 rose to 700 km in 2017, which meant 254% increase. Additionally, when the core along with the surrounding 3000 m buffer area was considered, 51 km all-weather roads in 1960 increased almost four and a half times by 2019. Suburban expansion was relatively stable inside the core area but had almost quadrupled within the surrounding areas, exposing the refuges to more people. These findings indicated that the wildlife habitats of Turkey are fragmented and under heavy human pressure.
- 10 June 2021
- Published by Taylor & Francis in International Journal of Forest Engineering
- Vol. 32 (3) , 246-255
Work efficiency and physical workload during the manual debarking of Scotch pine trees
A field-based study was carried out to determine the working conditions, productivity and physical workload of forestry workers equipped with debarking spades and axes in Scotch pine (Pinus sylvestris L.) stands in eastern Turkey. A work-cycle time prediction model was developed for the debarking of Scotch pine trees. It was found that the average debarking cycle times were 6.92 ± 2.29 min for the debarking spade and 7.17 ± 1.87 min for the ax when diameter class was not taken into account. The log-diameter class had a significant effect on the debarking time (min/cycle) for both debarking tools. The average physical workload (% heart-rate reserve) of the workers was 45.53 and 48.38% for the debarking spade and ax, respectively. Both values were classed as heavy workload intensity. There was a significant difference between debarking by spade and by ax on the physical workload of the workers at the p < 0.05 level. These results indicate that when debarking spades were used, workers were exposed to less physical workload during manual debarking.
- 10 June 2021
- Published by Taylor & Francis in International Journal of Forest Engineering
- Vol. 32 (3) , 246-255
Work efficiency and physical workload during the manual debarking of Scotch pine trees
A field-based study was carried out to determine the working conditions, productivity and physical workload of forestry workers equipped with debarking spades and axes in Scotch pine (Pinus sylvestris L.) stands in eastern Turkey. A work-cycle time prediction model was developed for the debarking of Scotch pine trees. It was found that the average debarking cycle times were 6.92 ± 2.29 min for the debarking spade and 7.17 ± 1.87 min for the ax when diameter class was not taken into account. The log-diameter class had a significant effect on the debarking time (min/cycle) for both debarking tools. The average physical workload (% heart-rate reserve) of the workers was 45.53 and 48.38% for the debarking spade and ax, respectively. Both values were classed as heavy workload intensity. There was a significant difference between debarking by spade and by ax on the physical workload of the workers at the p < 0.05 level. These results indicate that when debarking spades were used, workers were exposed to less physical workload during manual debarking.
- Open Access
- 30 December 2020
- Published by European Journal of Forest Engineering in European Journal of Forest Engineering
- Vol. 6 (2) , 78-86
Productivity Analysis of Tree-Length Harvesting using Farm Tractor in a Nordmann Fir Stand in Turkey
Because of the low investment costs, the winch equipped farm tractors usage is the most common logging technique for the primer transportation of wood-based forest products in Turkey. During the logging operations, farm tractors are commonly used for cable winching at a steep terrain while they are used for skidding operation on relatively flat terrain conditions in forest stands. The aim of this study was to evaluate the working conditions and determine the productivity of uphill winching using a farm tractor during tree length harvesting operation in a Nordmann fir stand (Abies nordmanniana). The study was conducted in Western Black Sea Region of Turkey. The average diameter and length of the forest products which were hauled from stump-site to landing areas were 17 cm and 28 m, respectively. The winching distances were ranged from 10 m to 70 m. Time analysis and field measurements related to independent variables (including winching distance, tree diameter, length and volume) were conducted while the farm tractor was winching the harvested forest products. For the farm tractor, the productivity was estimated and the cycle time prediction model was developed using the multiple regression method. It was found that the average hourly and daily productivity were 5.80 m3/hour and 46.42 m3/day for 8 hours, respectively. The most time consuming work element was winching (49.2%), followed with delay time (20.1%).
- 30 December 2020
- Published by European Journal of Forest Engineering in European Journal of Forest Engineering
- Vol. 6 (2) , 78-86
Open AccessProductivity Analysis of Tree-Length Harvesting using Farm Tractor in a Nordmann Fir Stand in Turkey
Because of the low investment costs, the winch equipped farm tractors usage is the most common logging technique for the primer transportation of wood-based forest products in Turkey. During the logging operations, farm tractors are commonly used for cable winching at a steep terrain while they are used for skidding operation on relatively flat terrain conditions in forest stands. The aim of this study was to evaluate the working conditions and determine the productivity of uphill winching using a farm tractor during tree length harvesting operation in a Nordmann fir stand (Abies nordmanniana). The study was conducted in Western Black Sea Region of Turkey. The average diameter and length of the forest products which were hauled from stump-site to landing areas were 17 cm and 28 m, respectively. The winching distances were ranged from 10 m to 70 m. Time analysis and field measurements related to independent variables (including winching distance, tree diameter, length and volume) were conducted while the farm tractor was winching the harvested forest products. For the farm tractor, the productivity was estimated and the cycle time prediction model was developed using the multiple regression method. It was found that the average hourly and daily productivity were 5.80 m3/hour and 46.42 m3/day for 8 hours, respectively. The most time consuming work element was winching (49.2%), followed with delay time (20.1%).