Hakan Fidan
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Hakan Fidan has a total of 19 co-authors. Here are the top co-authors by number of shared publications:
- Ayhan Tozluoğlu
Duzce Universitesi
3 shared publications Ayhan Tozluoğlu
Düzce University
2 shared publications- Selva Sertkaya
Duzce Universitesi
2 shared publications - Zeki Candan
Istanbul University-Cerrahpasa
2 shared publications Ahmet Tutuş
Department of Wood Chemistry and Technology, Faculty of Forestry , 37519 Kahramanmaraş Sütçü İmam University Kahramanmaraş , Turkey
1 shared publicationBayram Poyraz
Composite and Materials Laboratory, Department of Civil Engineering, Faculty of Technology , 121595 Düzce University Düzce , Turkey
1 shared publication
Latest Publications
- 1 August 2024
- Published by BioResources in BioResources
- Vol. 19 (4) , 7136-7153
Nanocellulose production from walnut pruning wastes using hydrated deep eutectic solvent as paper strength additives
The valorization potential of industrial walnut pruning wastes was investigated as a value-added product. Nanofibrillated cellulose (NFC) was prepared from walnut pruning wastes via hydrated choline chloride-lactic acid deep eutectic solvent (ChCl-LA DES) pretreatment followed by grinding, and these were used as paper strength additives. The effect of reaction time on NFC properties were investigated and compared. The structure of nanocellulose was determined by Fourier transform infrared, scanning electron microscopy (SEM), and rheological analysis. The results show that carboxylated NFC having high aspect ratio could be successfully isolated after DES-pretreatment with the average diameter of 39 to 77 nm. Prepared NFC was added to the bulk suspensions of papermaking slurries at various percentages (up to 8%) together with poly(diallyldimethylammonium chloride). The drainage and electrokinetic properties of the pulp and mechanical properties of fabricated handsheets were analyzed and compared. The addition of 1% NFC to the bulk suspensions increased tensile index by 14.2% and burst index by 6.3%. There were further increases observed up to 71.8% in tensile index and up to 72.3% in burst index at 8% NFC addition. Results indicate that DES pretreated cellulose nanofibrils have great potential as reinforcing agent in papermaking.
- 1 August 2024
- Published by BioResources in BioResources
- Vol. 19 (4) , 7136-7153
Nanocellulose production from walnut pruning wastes using hydrated deep eutectic solvent as paper strength additives
The valorization potential of industrial walnut pruning wastes was investigated as a value-added product. Nanofibrillated cellulose (NFC) was prepared from walnut pruning wastes via hydrated choline chloride-lactic acid deep eutectic solvent (ChCl-LA DES) pretreatment followed by grinding, and these were used as paper strength additives. The effect of reaction time on NFC properties were investigated and compared. The structure of nanocellulose was determined by Fourier transform infrared, scanning electron microscopy (SEM), and rheological analysis. The results show that carboxylated NFC having high aspect ratio could be successfully isolated after DES-pretreatment with the average diameter of 39 to 77 nm. Prepared NFC was added to the bulk suspensions of papermaking slurries at various percentages (up to 8%) together with poly(diallyldimethylammonium chloride). The drainage and electrokinetic properties of the pulp and mechanical properties of fabricated handsheets were analyzed and compared. The addition of 1% NFC to the bulk suspensions increased tensile index by 14.2% and burst index by 6.3%. There were further increases observed up to 71.8% in tensile index and up to 72.3% in burst index at 8% NFC addition. Results indicate that DES pretreated cellulose nanofibrils have great potential as reinforcing agent in papermaking.
- 18 July 2023
- Published by BioResources in BioResources
- Vol. 18 (3) , 5993-6012
Effect of size press coating of cationic starch/ nanofibrillated cellulose on physical and mechanical properties of recycled papersheets
This study aimed to evaluate the effect of size press coating on two types of recycled papers using different types of nanofibrillated cellulose (NFC) and cationic starch (CS) on physical and mechanical properties. Wheat straw was used as a cellulose source, and NFC was obtained through oxidative and enzymatic pretreatments. Recycled fluting and coreboard papers were coated with cationic starch/NFC blends at various concentrations of NFC (0.5%, 1%, 2%, 3%, and 4%) using a three-time repetitive size press application, followed by one-time drying section, and compared to uncoated papers. The application of a coating suspension containing 4% periodate-oxidized NFC on both paper surfaces resulted in a significant improvement in the tensile index, burst index, and internal bond strength of the papersheets, with increases of up to 60.6%, 96.3%, and 119.9%, respectively. Furthermore, significant decreases in air permeability were also observed with reductions of 75% and 81.6% for coreboard and fluting papers, respectively. Compared to other pretreatment methods, periodate oxidation resulted in higher viscosity values in NFC samples. Therefore, the application of periodate-oxidized NFC with a size press resulted in a significant improvement in the mechanical and barrier properties of papers made from recycled pulps.
- 18 July 2023
- Published by BioResources in BioResources
- Vol. 18 (3) , 5993-6012
Effect of size press coating of cationic starch/ nanofibrillated cellulose on physical and mechanical properties of recycled papersheets
This study aimed to evaluate the effect of size press coating on two types of recycled papers using different types of nanofibrillated cellulose (NFC) and cationic starch (CS) on physical and mechanical properties. Wheat straw was used as a cellulose source, and NFC was obtained through oxidative and enzymatic pretreatments. Recycled fluting and coreboard papers were coated with cationic starch/NFC blends at various concentrations of NFC (0.5%, 1%, 2%, 3%, and 4%) using a three-time repetitive size press application, followed by one-time drying section, and compared to uncoated papers. The application of a coating suspension containing 4% periodate-oxidized NFC on both paper surfaces resulted in a significant improvement in the tensile index, burst index, and internal bond strength of the papersheets, with increases of up to 60.6%, 96.3%, and 119.9%, respectively. Furthermore, significant decreases in air permeability were also observed with reductions of 75% and 81.6% for coreboard and fluting papers, respectively. Compared to other pretreatment methods, periodate oxidation resulted in higher viscosity values in NFC samples. Therefore, the application of periodate-oxidized NFC with a size press resulted in a significant improvement in the mechanical and barrier properties of papers made from recycled pulps.
- Open Access
- 12 April 2023
- Published by Journal of the Faculty of Engineering and Architecture of Gazi University in Gazi Üniversitesi Mühendislik-Mimarlık Fakültesi Dergisi
- Vol. 38 (4) , 2055-2068
Buğday sapından nanoselüloz üretiminde farklı enzimatik ön muamele işlemlerinin etkisi
Kök, sap, saman, yaprak ve kabuk vb. gibi lignoselülozik hammadde kaynaklarından elde edilebilen nanoselüloz, kullanım potansiyeli ile orman ürünleri alanında önemli bir malzemedir. Tarımsal faaliyetler sonucu ortaya çıkar ve sahip olduğu fiziksel, kimyasal ve morfolojik özellikleri ile kullanıldığı nihai ürünlere olumlu etkiler sağlar. Literatürde nanoselüloz üretim yöntemi olarak sıklıkla kullanılan alkali veya asidik üretim yöntemine nazaran enzimatik hidroliz yöntemi daha az araştırılmıştır. Genel olarak, enzimatik hidroliz yoluyla nanoselüloz üretim süreçleri ile selüloz nanofibriller (CNF) üretilirken, enzimatik olmayan işlemler ile kristal nanoselülozlar (CNC) üretilmektedir. Bu çalışmada ilk kez buğday sapından elde edilen soda-NaBH4 ağartılmış kağıt hamuru liflerine iki farklı enzimatik ön muamele (hemiselülaz Pulpzyme HC 2500 ve selülaz Celluclast 1.5 L ticari enzimleri) ve ardından gerçekleştirilen homojenizasyon işlemi ile CNF elde edilmiş, homojenizasyon işlemi sonrası elde edilen CNF’ nin kimyasal, morfolojik, termal ve reolojik özelliklerindeki değişimler incelenmiştir. Enzimatik ön muamele işlemleri sonrasında gerçekleştirilen HPLC analizleri; artan enzim konsantrasyonlarında yapıdan daha fazla miktarda karbonhidratın uzaklaştırıldığını ve yüksek basınç altında gerçekleştirilen homojenizasyon sonrasında alınan SEM görüntüleri liflerin CNF üretiminde homojen bir şekilde nano boyuta indirgendiğini (ortalama 20-50 nm lif çapı) ortaya koymuştur.
- 12 April 2023
- Published by Journal of the Faculty of Engineering and Architecture of Gazi University in Gazi Üniversitesi Mühendislik-Mimarlık Fakültesi Dergisi
- Vol. 38 (4) , 2055-2068
Open AccessBuğday sapından nanoselüloz üretiminde farklı enzimatik ön muamele işlemlerinin etkisi
Kök, sap, saman, yaprak ve kabuk vb. gibi lignoselülozik hammadde kaynaklarından elde edilebilen nanoselüloz, kullanım potansiyeli ile orman ürünleri alanında önemli bir malzemedir. Tarımsal faaliyetler sonucu ortaya çıkar ve sahip olduğu fiziksel, kimyasal ve morfolojik özellikleri ile kullanıldığı nihai ürünlere olumlu etkiler sağlar. Literatürde nanoselüloz üretim yöntemi olarak sıklıkla kullanılan alkali veya asidik üretim yöntemine nazaran enzimatik hidroliz yöntemi daha az araştırılmıştır. Genel olarak, enzimatik hidroliz yoluyla nanoselüloz üretim süreçleri ile selüloz nanofibriller (CNF) üretilirken, enzimatik olmayan işlemler ile kristal nanoselülozlar (CNC) üretilmektedir. Bu çalışmada ilk kez buğday sapından elde edilen soda-NaBH4 ağartılmış kağıt hamuru liflerine iki farklı enzimatik ön muamele (hemiselülaz Pulpzyme HC 2500 ve selülaz Celluclast 1.5 L ticari enzimleri) ve ardından gerçekleştirilen homojenizasyon işlemi ile CNF elde edilmiş, homojenizasyon işlemi sonrası elde edilen CNF’ nin kimyasal, morfolojik, termal ve reolojik özelliklerindeki değişimler incelenmiştir. Enzimatik ön muamele işlemleri sonrasında gerçekleştirilen HPLC analizleri; artan enzim konsantrasyonlarında yapıdan daha fazla miktarda karbonhidratın uzaklaştırıldığını ve yüksek basınç altında gerçekleştirilen homojenizasyon sonrasında alınan SEM görüntüleri liflerin CNF üretiminde homojen bir şekilde nano boyuta indirgendiğini (ortalama 20-50 nm lif çapı) ortaya koymuştur.
- 25 March 2022
- Published by Elsevier
- p. 49-137
Nanocellulose: Sustainable biomaterial for developing novel adhesives and composites
- 25 March 2022
- Published by Elsevier
- p. 49-137
Nanocellulose: Sustainable biomaterial for developing novel adhesives and composites
- 11 June 2021
- Published by Walter de Gruyter GmbH in Nordic Pulp & Paper Research Journal
- Vol. 36 (3) , 523-535
Application of modified cellulose nanofibrils as coating suspension on recycled paper using size press
Cellulose based nanomaterials have the great potential to be applied to paper as bulk additive or coating material to improve overall final properties, especially in secondary fiber. In the present work, the effect of applying different kinds of cellulose nanofibrils (CNF) to papers obtained from recycled fibers using size press on physical, mechanical and barrier properties was investigated and compared with the sole use of starch as coating material. The coating process of CNF was carried out by the addition of size press grade starch to coating suspension. As a cellulose source, wheat straw was evaluated and CNF was obtained through oxidative and enzymatic pretreatments. Results indicate that starch/CNF suspension improves the overall paper properties. As a result of the deposition of coating suspension contains of 4 % wt. periodate-oxidized CNF onto paper surface, tensile and burst indices of papersheets increased as 52.2 % and 194.4 %. Significant decreases were observed in air permeability as 69.8 %. Compression tests also have been conducted to evaluate papersheets end-use properties. In comparison to the other pretreated CNF, due to is lower viscosity, applying periodate-oxidized CNF as size press significantly increased the mechanical properties of the papers fabricated from the recycled pulps.
- 11 June 2021
- Published by Walter de Gruyter GmbH in Nordic Pulp & Paper Research Journal
- Vol. 36 (3) , 523-535
Application of modified cellulose nanofibrils as coating suspension on recycled paper using size press
Cellulose based nanomaterials have the great potential to be applied to paper as bulk additive or coating material to improve overall final properties, especially in secondary fiber. In the present work, the effect of applying different kinds of cellulose nanofibrils (CNF) to papers obtained from recycled fibers using size press on physical, mechanical and barrier properties was investigated and compared with the sole use of starch as coating material. The coating process of CNF was carried out by the addition of size press grade starch to coating suspension. As a cellulose source, wheat straw was evaluated and CNF was obtained through oxidative and enzymatic pretreatments. Results indicate that starch/CNF suspension improves the overall paper properties. As a result of the deposition of coating suspension contains of 4 % wt. periodate-oxidized CNF onto paper surface, tensile and burst indices of papersheets increased as 52.2 % and 194.4 %. Significant decreases were observed in air permeability as 69.8 %. Compression tests also have been conducted to evaluate papersheets end-use properties. In comparison to the other pretreated CNF, due to is lower viscosity, applying periodate-oxidized CNF as size press significantly increased the mechanical properties of the papers fabricated from the recycled pulps.
- Open Access
- 12 May 2021
- Published by Artvin Coruh Universitesi Orman Fakultesi Dergisi in Artvin Çoruh Üniversitesi Orman Fakültesi Dergisi
- Vol. 22 (1) , 148-160
Atık sularda boya giderimi için fonsiyonellenmiş nanoselüloz esaslı adsorbanlar
Son yıllarda, dünya genelinde artan nüfus ile birlikte tarımsal ve endüstriyel faaliyetler giderek artmıştır. Bu faaliyetler sırasında ortaya çıkan organik maddeler, inorganik anyonlar, toksik ağır metaller, zehirli gazlar vb. birçok kirletici çevreye salınmakta ve özellikle sularda önemli derecede kirlilik sorunlarına yol açmaktadır. Bu nedenle çevre dostu ve uygun maliyetli arıtma teknolojilerine ihtiyaç duyulmaktadır. Atık sularda kullanılan adsorpsiyon işlemi çevre dostu arıtma teknolojilerinden biridir. Çeşitli doğal kaynaklardan elde edilebilen selülozik maddeler adsorbanlar olarak kullanılabilmektedir. Atık sularda bulunan organik kirleticiler ve ağır metal iyonlarının adsorpsiyon kapasiteleri kimyasal işlemlerden etkilenmekte olup, modifiye edilmiş selülozun modifiye edilmemiş selüloza göre daha yüksek adsorpsiyon kapasitesi sergilediği bilinmektedir. Bu derlemede, literatürde yer alan çeşitli nanoselüloz esaslı adsorbanların, özellikle atık sularda bulunan boyaların uzaklaştırılmasında sergiledikleri adsorpsiyon kapasiteleri ve bu adsorbanların modifikasyonları sonrasında yapılarının karakterizasyonunda kullanılan FTIR ve SEM analizleri incelenmiştir. Nanoselüloz esaslı adsorbanların atık sulardaki boyaların uzaklaştırılmasında iyi bir potansiyel sergilediği görülmektedir. Çevre kirliliğini minimuma indirmek için ucuz ve daha etkili selüloz esaslı adsorbanların modifikasyonlarla geliştirilebileceği düşünülmektedir.
- 12 May 2021
- Published by Artvin Coruh Universitesi Orman Fakultesi Dergisi in Artvin Çoruh Üniversitesi Orman Fakültesi Dergisi
- Vol. 22 (1) , 148-160
Open AccessAtık sularda boya giderimi için fonsiyonellenmiş nanoselüloz esaslı adsorbanlar
Son yıllarda, dünya genelinde artan nüfus ile birlikte tarımsal ve endüstriyel faaliyetler giderek artmıştır. Bu faaliyetler sırasında ortaya çıkan organik maddeler, inorganik anyonlar, toksik ağır metaller, zehirli gazlar vb. birçok kirletici çevreye salınmakta ve özellikle sularda önemli derecede kirlilik sorunlarına yol açmaktadır. Bu nedenle çevre dostu ve uygun maliyetli arıtma teknolojilerine ihtiyaç duyulmaktadır. Atık sularda kullanılan adsorpsiyon işlemi çevre dostu arıtma teknolojilerinden biridir. Çeşitli doğal kaynaklardan elde edilebilen selülozik maddeler adsorbanlar olarak kullanılabilmektedir. Atık sularda bulunan organik kirleticiler ve ağır metal iyonlarının adsorpsiyon kapasiteleri kimyasal işlemlerden etkilenmekte olup, modifiye edilmiş selülozun modifiye edilmemiş selüloza göre daha yüksek adsorpsiyon kapasitesi sergilediği bilinmektedir. Bu derlemede, literatürde yer alan çeşitli nanoselüloz esaslı adsorbanların, özellikle atık sularda bulunan boyaların uzaklaştırılmasında sergiledikleri adsorpsiyon kapasiteleri ve bu adsorbanların modifikasyonları sonrasında yapılarının karakterizasyonunda kullanılan FTIR ve SEM analizleri incelenmiştir. Nanoselüloz esaslı adsorbanların atık sulardaki boyaların uzaklaştırılmasında iyi bir potansiyel sergilediği görülmektedir. Çevre kirliliğini minimuma indirmek için ucuz ve daha etkili selüloz esaslı adsorbanların modifikasyonlarla geliştirilebileceği düşünülmektedir.