Nianchen Zhou
Nianchen Zhou has a total of 85 co-authors. Here are the top co-authors by number of shared publications:
- Xiulin Zhu
State and Local Joint Engineering Laboratory for Novel Functional Polymeric Materials, Jiangsu Key Laboratory of Advanced Functional Polymer Design and Application, Department of Polymer Science and Engineering, College of Chemistry, Chemical Engineering and Materials Science, Soochow University, Suzhou 215123, China
21 shared publications - Zhengbiao Zhang
Soochow University
19 shared publications Wei Zhang
State and Local Joint Engineering Laboratory for Novel Functional Polymeric Materials Jiangsu Key Laboratory of Advanced Functional Polymer Design and Application College of Chemistry, Chemical Engineering and Materials Science Soochow University Suzhou 215123 P. R. China
15 shared publicationsXiulin Zhu
Suzhou Key Laboratory of Macromolecular Design and Precision Synthesis, Jiangsu Key Laboratory of Advanced Functional Polymer Design and Application, State and Local Joint Engineering Laboratory for Novel Functional Polymeric Materials, College of Chemistry, Chemical Engineering and Materials Science, Soochow University, Suzhou, 215123, China
14 shared publicationsZhengbiao Zhang
State and Local Joint Engineering Laboratory for Novel Functional Polymeric Materials
14 shared publicationsLishan Li
State and Local Joint Engineering Laboratory for Novel Functional Polymeric Materials Jiangsu Key Laboratory of Advanced Functional Polymer Design and Application College of Chemistry, Chemical Engineering and Materials Science Soochow University Suzhou 215123 P. R. China
13 shared publications
Latest Publications
- Open Access
- 11 August 2023
- Published by Royal Society of Chemistry (RSC) in RSC Advances
- Vol. 13 (35) , 24181-24190
Sequence effect on the self-assembly of discrete amphiphilic co-oligomers with fluorene-azobenzene semirigid backbones
Sequences can have a dramatic impact on the unique properties and self-assembly in natural macromolecules, which has received increasing interest. Herein, we report a series of discrete amphiphilic co-oligomers with the same composition but different building blocks in a semirigid backbone. These sequence-defined oligomers possess two primary amine groups on the side chain of the azobenzene building block, and hence, they become amphipathic due to quaternization of the amine groups when protonated in acidic aqueous solution. These oligomer isomers assembled into different nanoparticles, including nanofibers, hollow vesicles and spherical micellar complexes, in a THF/water/HCl mixture under the same conditions. UV-vis absorption spectra, differential scanning calorimetry (DSC) and X-ray scattering (XRD) experiments combined with theoretical calculations reveal that the sequence-controlled co-oligomers induce different molecular packing conformations and arrangement modes of building blocks in self-assembly. Furthermore, these self-assembled nanoparticles demonstrate photoresponsive morphological transformation and fluorescence emission under UV light irradiation due to trans-to-cis photoisomerization of azobenzene. This work demonstrates that customizing functional nanoparticles can be achieved by controlling the sequence structure in synthetic co-oligomers.
- 11 August 2023
- Published by Royal Society of Chemistry (RSC) in RSC Advances
- Vol. 13 (35) , 24181-24190
Open AccessSequence effect on the self-assembly of discrete amphiphilic co-oligomers with fluorene-azobenzene semirigid backbones
Sequences can have a dramatic impact on the unique properties and self-assembly in natural macromolecules, which has received increasing interest. Herein, we report a series of discrete amphiphilic co-oligomers with the same composition but different building blocks in a semirigid backbone. These sequence-defined oligomers possess two primary amine groups on the side chain of the azobenzene building block, and hence, they become amphipathic due to quaternization of the amine groups when protonated in acidic aqueous solution. These oligomer isomers assembled into different nanoparticles, including nanofibers, hollow vesicles and spherical micellar complexes, in a THF/water/HCl mixture under the same conditions. UV-vis absorption spectra, differential scanning calorimetry (DSC) and X-ray scattering (XRD) experiments combined with theoretical calculations reveal that the sequence-controlled co-oligomers induce different molecular packing conformations and arrangement modes of building blocks in self-assembly. Furthermore, these self-assembled nanoparticles demonstrate photoresponsive morphological transformation and fluorescence emission under UV light irradiation due to trans-to-cis photoisomerization of azobenzene. This work demonstrates that customizing functional nanoparticles can be achieved by controlling the sequence structure in synthetic co-oligomers.
- 9 May 2022
- Published by Wiley in Macromolecular Chemistry and Physics
- Vol. 223 (15)
Novel Near‐Infrared Fluorescent Nanoprobe Synthesized by the RAFT‐Mediated PISA Strategy for Hypoxia‐Triggered Tumor Imaging and Azoreductase‐Responsive Drug Release
Drug carriers and visual tracking play an important role in accurate and efficient drug delivery systems for targeted drug therapy. Polymerization‐induced self‐assembly (PISA), a powerful strategy for the fabrication of stimuli‐responsive polymeric nanoparticles has been a focus over the past decade due to its promising applications in biomedical fields such as targeted drug delivery and fluorescent nanoprobes used for tumor imaging. Herein, hypoxia‐responsive near‐infrared (NIR) fluorescent nanoprobes of amphiphilic block copolymers (PPEGMA14‐ADP‐Azo‐PBzMAx) are reported, the first example synthesized by RAFT‐mediated PISA strategy in situ to realize synchronous drug release and cell imaging. First, a series of nanoparticles with different morphologies and sizes, including spheres and vesicles, are synthesized by the PISA strategy using PPEGMA14‐ADP‐Azo‐CDPA as macro‐RAFT agents link with near‐infrared Aza‐BODIPY fluorogen and azobenzene groups. Hypoxia‐triggered dissociation of the nanoprobes and NIR fluorescence emission is then observed because of the cleavage of azo bonds. Meanwhile, the in situ DOX‐loaded nanoprobes by the PISA demonstrate synchronous drug release and NIR fluorescence enhancement against mouse colon cancer cells (CT26) under hypoxia (1% O2) compared with under normoxia (16% O2).
- 9 May 2022
- Published by Wiley in Macromolecular Chemistry and Physics
- Vol. 223 (15)
Novel Near‐Infrared Fluorescent Nanoprobe Synthesized by the RAFT‐Mediated PISA Strategy for Hypoxia‐Triggered Tumor Imaging and Azoreductase‐Responsive Drug Release
Drug carriers and visual tracking play an important role in accurate and efficient drug delivery systems for targeted drug therapy. Polymerization‐induced self‐assembly (PISA), a powerful strategy for the fabrication of stimuli‐responsive polymeric nanoparticles has been a focus over the past decade due to its promising applications in biomedical fields such as targeted drug delivery and fluorescent nanoprobes used for tumor imaging. Herein, hypoxia‐responsive near‐infrared (NIR) fluorescent nanoprobes of amphiphilic block copolymers (PPEGMA14‐ADP‐Azo‐PBzMAx) are reported, the first example synthesized by RAFT‐mediated PISA strategy in situ to realize synchronous drug release and cell imaging. First, a series of nanoparticles with different morphologies and sizes, including spheres and vesicles, are synthesized by the PISA strategy using PPEGMA14‐ADP‐Azo‐CDPA as macro‐RAFT agents link with near‐infrared Aza‐BODIPY fluorogen and azobenzene groups. Hypoxia‐triggered dissociation of the nanoprobes and NIR fluorescence emission is then observed because of the cleavage of azo bonds. Meanwhile, the in situ DOX‐loaded nanoprobes by the PISA demonstrate synchronous drug release and NIR fluorescence enhancement against mouse colon cancer cells (CT26) under hypoxia (1% O2) compared with under normoxia (16% O2).
- 15 September 2021
- Published by Wiley in Macromolecular Chemistry and Physics
- Vol. 223 (12) , 2100202
A Consequence of Dispersity on the Self‐Assembly of Amphiphilic Homopolymers Containing Main‐Chain Azobenzene
The self‐assembly of amphiphilic oligomers/polymers is a versatile and promising approach for creating nonspherical polymeric nanoparticles. Discrete amphiphilic oligomers/polymers with molecularly defined structures are ideal candidates for fabricating smart nanoparticles and for achieving a deeper understanding of structure‐controlled self‐assembly. Herein, discrete and disperse amphiphilic homopolymers of PAZOnTEG2n, with hydrophobic azobenzene are designed and synthesized as the main chains tethered with hydrophilic tetraethylene glycol monomethyl ether (TEG) units, to accurately investigate the impact of dispersity on their self‐assembly in solution. The discrete‐PAZO8TEG16 in DMF/water and in THF/water results in the formation of 2D lamellae, while the dispersed counterpart prefers to self‐assemble into spherical micelles. The significant difference is due to their distinction between interior structures of assembly. Furthermore, photoisomerization of azobenzene triggers dissociation/reassembly for discrete polymeric nanoparticles but no obvious change for the dispersed counterparts under irradiation with UV/vis light. This work reveals the influence of dispersity on the self‐assembly of amphiphilic polymers and stimuli‐responsive properties of their nanomaterials, which is desirable for universal applicability in fabricating smart 2D lamellas.
- 15 September 2021
- Published by Wiley in Macromolecular Chemistry and Physics
- Vol. 223 (12) , 2100202
A Consequence of Dispersity on the Self‐Assembly of Amphiphilic Homopolymers Containing Main‐Chain Azobenzene
The self‐assembly of amphiphilic oligomers/polymers is a versatile and promising approach for creating nonspherical polymeric nanoparticles. Discrete amphiphilic oligomers/polymers with molecularly defined structures are ideal candidates for fabricating smart nanoparticles and for achieving a deeper understanding of structure‐controlled self‐assembly. Herein, discrete and disperse amphiphilic homopolymers of PAZOnTEG2n, with hydrophobic azobenzene are designed and synthesized as the main chains tethered with hydrophilic tetraethylene glycol monomethyl ether (TEG) units, to accurately investigate the impact of dispersity on their self‐assembly in solution. The discrete‐PAZO8TEG16 in DMF/water and in THF/water results in the formation of 2D lamellae, while the dispersed counterpart prefers to self‐assemble into spherical micelles. The significant difference is due to their distinction between interior structures of assembly. Furthermore, photoisomerization of azobenzene triggers dissociation/reassembly for discrete polymeric nanoparticles but no obvious change for the dispersed counterparts under irradiation with UV/vis light. This work reveals the influence of dispersity on the self‐assembly of amphiphilic polymers and stimuli‐responsive properties of their nanomaterials, which is desirable for universal applicability in fabricating smart 2D lamellas.
- 10 June 2021
- Published by Wiley in Macromolecular Chemistry and Physics
- Vol. 222 (14) , 2100092
Synthesis of Discrete Conjugated Fluorene‐Azo Oligomers for the Investigation of Azobenzene Position‐Dependent Physical Properties and Photoresponsive Behavior
It is well known that macromolecular structure, including composition, topology and sequence, significantly determines the properties of conjugated polymers/oligomers. To accurately understand the structure‐induced properties, discrete oligomers/polymers with molecularly defined structures are the ideal model because they provide distinct nonstatistical results. Herein, a series of discrete conjugated fluorene‐azo oligomers with different positions of the azobenzene units along the main chain (i.e., sequence) are efficiently prepared based on CuAAC “click” chemistry via a stepwise chain‐growth strategy. Position‐dependent behavior has an evident impact on the properties of oligomers, such as thermal properties, optical properties and photoresponsive behavior in both solution and thin film states. In addition, the fluorene‐azo oligomers show less photodegradation of 9,9‐dioctyl‐fluorene in the solid‐state than oligofluorene during UV light irradiation; however, position‐dependent photodegradation is found in solution. Optimized configurations and UV–vis absorption spectra of fluorene‐azo oligomers are calculated by density functional theory. Experimental results and theoretical analysis indicate that the location of azobenzene can play a dominant role in determining the properties of fluorene‐azo oligomers resulting from sequence‐mandated conformational changes. Undoubtedly, this work can provide deeper insight into the structure–property relationships based on precisely sequence‐defined polymer structures.
- 10 June 2021
- Published by Wiley in Macromolecular Chemistry and Physics
- Vol. 222 (14) , 2100092
Synthesis of Discrete Conjugated Fluorene‐Azo Oligomers for the Investigation of Azobenzene Position‐Dependent Physical Properties and Photoresponsive Behavior
It is well known that macromolecular structure, including composition, topology and sequence, significantly determines the properties of conjugated polymers/oligomers. To accurately understand the structure‐induced properties, discrete oligomers/polymers with molecularly defined structures are the ideal model because they provide distinct nonstatistical results. Herein, a series of discrete conjugated fluorene‐azo oligomers with different positions of the azobenzene units along the main chain (i.e., sequence) are efficiently prepared based on CuAAC “click” chemistry via a stepwise chain‐growth strategy. Position‐dependent behavior has an evident impact on the properties of oligomers, such as thermal properties, optical properties and photoresponsive behavior in both solution and thin film states. In addition, the fluorene‐azo oligomers show less photodegradation of 9,9‐dioctyl‐fluorene in the solid‐state than oligofluorene during UV light irradiation; however, position‐dependent photodegradation is found in solution. Optimized configurations and UV–vis absorption spectra of fluorene‐azo oligomers are calculated by density functional theory. Experimental results and theoretical analysis indicate that the location of azobenzene can play a dominant role in determining the properties of fluorene‐azo oligomers resulting from sequence‐mandated conformational changes. Undoubtedly, this work can provide deeper insight into the structure–property relationships based on precisely sequence‐defined polymer structures.
- 26 April 2021
- Published by Royal Society of Chemistry (RSC) in Polymer Chemistry
- Vol. 12 (20) , 3052-3059
Morphological modulation of azobenzene-containing tubular polymersomes
The emergence of smart tubular vesicles has attracted increasing attention in the fields of life science and nanoengineering. Recent preliminary efforts have been put into fabricating kinds of smart tubular vesicles with different morphologies via the self-assembly of amphiphilic azobenzene-containing block copolymers. However, the detailed environmental effects on their self-assembly behaviors in solution remain uncharted. In this work, we carefully investigated several external factors that could influence the morphology formation and the transition of azobenzene-containing tubular vesicles, including the initial polymer concentration, the nature of common solvent, temperature, water addition rate, and irradiation with light of different wavelengths. The result showed that the morphological modulation of these tubular polymersomes was synergistically controlled by these external factors from both thermodynamics and kinetics aspects. This study could be helpful to understand and illustrate the morphology formation and modulation of smart tubular polymersomes.
- 26 April 2021
- Published by Royal Society of Chemistry (RSC) in Polymer Chemistry
- Vol. 12 (20) , 3052-3059
Morphological modulation of azobenzene-containing tubular polymersomes
The emergence of smart tubular vesicles has attracted increasing attention in the fields of life science and nanoengineering. Recent preliminary efforts have been put into fabricating kinds of smart tubular vesicles with different morphologies via the self-assembly of amphiphilic azobenzene-containing block copolymers. However, the detailed environmental effects on their self-assembly behaviors in solution remain uncharted. In this work, we carefully investigated several external factors that could influence the morphology formation and the transition of azobenzene-containing tubular vesicles, including the initial polymer concentration, the nature of common solvent, temperature, water addition rate, and irradiation with light of different wavelengths. The result showed that the morphological modulation of these tubular polymersomes was synergistically controlled by these external factors from both thermodynamics and kinetics aspects. This study could be helpful to understand and illustrate the morphology formation and modulation of smart tubular polymersomes.
- 31 March 2021
- Published by Royal Society of Chemistry (RSC) in Polymer Chemistry
- Vol. 12 (17) , 2598-2605
Efficient synthesis of discrete oligo(fluorenediacetylene)s toward chain-length-dependent optical and structural properties
Discrete oligomers are perfect candidates for understanding the structure-dependent properties of polymers. Herein, a series of discrete conjugated oligo(fluorenediacetylene)s (D-oFDAs) with a degree of polymerization (DP) up to 10 were obtained by purification with automated flash column chromatography from polydisperse polymers. It is found that the chain length can affect not only photophysical properties but also crystalline properties. As the DP of D-oFDAs increased, the longer conjugation length caused red shifts in their optical spectra and weaker crystallinity. The effective conjugation length has been extrapolated to be as long as 9 fluorenediacetylene units. Moreover, the oligomers can form uniform films by solution casting for the fabrication of light-emitting diodes, showing that the octamer has the most efficient electroluminescence (EL) properties. When the crystal of the dimer was exposed to 254 nm UV light, only part of the sample was polymerized via a 1,4-addition reaction. Significantly, the simple, scalable and effective strategy provides opportunities to further optimize the structure with diverse blocks and side chains for precisely building macromolecular architectures.
- 31 March 2021
- Published by Royal Society of Chemistry (RSC) in Polymer Chemistry
- Vol. 12 (17) , 2598-2605
Efficient synthesis of discrete oligo(fluorenediacetylene)s toward chain-length-dependent optical and structural properties
Discrete oligomers are perfect candidates for understanding the structure-dependent properties of polymers. Herein, a series of discrete conjugated oligo(fluorenediacetylene)s (D-oFDAs) with a degree of polymerization (DP) up to 10 were obtained by purification with automated flash column chromatography from polydisperse polymers. It is found that the chain length can affect not only photophysical properties but also crystalline properties. As the DP of D-oFDAs increased, the longer conjugation length caused red shifts in their optical spectra and weaker crystallinity. The effective conjugation length has been extrapolated to be as long as 9 fluorenediacetylene units. Moreover, the oligomers can form uniform films by solution casting for the fabrication of light-emitting diodes, showing that the octamer has the most efficient electroluminescence (EL) properties. When the crystal of the dimer was exposed to 254 nm UV light, only part of the sample was polymerized via a 1,4-addition reaction. Significantly, the simple, scalable and effective strategy provides opportunities to further optimize the structure with diverse blocks and side chains for precisely building macromolecular architectures.
- 24 December 2020
- Published by Royal Society of Chemistry (RSC) in Chemical Communications
- Vol. 57 (17) , 2192-2195
Smart supramolecular nanofibers and nanoribbons from uniform amphiphilic azobenzene oligomers
A series of smart 1D nanostructures were fabricated by multiple supramolecular self-assembly of uniform azobenzene amphiphilic oligomers with tunable molecular weight and side chain functionality.
- 24 December 2020
- Published by Royal Society of Chemistry (RSC) in Chemical Communications
- Vol. 57 (17) , 2192-2195
Smart supramolecular nanofibers and nanoribbons from uniform amphiphilic azobenzene oligomers
A series of smart 1D nanostructures were fabricated by multiple supramolecular self-assembly of uniform azobenzene amphiphilic oligomers with tunable molecular weight and side chain functionality.
- 31 July 2020
- Published by Royal Society of Chemistry (RSC) in Polymer Chemistry
- Vol. 11 (35) , 5619-5629
Azoreductase-triggered fluorescent nanoprobe synthesized by RAFT-mediated polymerization-induced self-assembly for drug release
Azobenzene-based polymeric nanoparticles have emerged as promising candidate for biological detection and controlled drug release in an anaerobic environment for colon disease treatment. Herein, we report a novel and efficient polymerization-induced self-assembly (PISA) strategy for fabricating polymeric nanovehicles to load drugs for triggered release and fluorescence detection based on a TPE (tetraphenylethylene)-azobenzene fluorescence probe sensitive to hypoxic microenvironments. In this study, a series of PISA-nanoparticles, including micelles and vesicles, were synthesized by reversible addition–fragmentation transfer (RAFT) dispersion copolymerization of monomers butyl methacrylate (BMA) and reductive-responsive TPE-AZO-MA (TPE-azobenzene derived methacrylate) in a 1,4-dioxane/water mixture. Subsequently, polymeric micelles loaded with doxorubicin (DOX) in situ were successfully obtained by PISA. Furthermore, the release and fluorescence change of PISA-formed micelles loaded with DOX were studied in a simulated colon environment under the action of azoreductase. As expected, the drug-loaded micelles showed an effective DOX release during enzyme hydrolysis within 24 h owing to azo bond cleavage. Meanwhile, significant fluorescence enhancement was observed, accompanied by the release process. This was due to the aggregation-induced emission (AIE) performance of TPE being efficiently activated by elimination of the fluorescence resonance energy transfer (FRET) process, also owing to azo bond cleavage. Finally, the cytotoxicity and cellular uptake of the blank micelles and DOX-loaded micelles in vitro were evaluated.
- 31 July 2020
- Published by Royal Society of Chemistry (RSC) in Polymer Chemistry
- Vol. 11 (35) , 5619-5629
Azoreductase-triggered fluorescent nanoprobe synthesized by RAFT-mediated polymerization-induced self-assembly for drug release
Azobenzene-based polymeric nanoparticles have emerged as promising candidate for biological detection and controlled drug release in an anaerobic environment for colon disease treatment. Herein, we report a novel and efficient polymerization-induced self-assembly (PISA) strategy for fabricating polymeric nanovehicles to load drugs for triggered release and fluorescence detection based on a TPE (tetraphenylethylene)-azobenzene fluorescence probe sensitive to hypoxic microenvironments. In this study, a series of PISA-nanoparticles, including micelles and vesicles, were synthesized by reversible addition–fragmentation transfer (RAFT) dispersion copolymerization of monomers butyl methacrylate (BMA) and reductive-responsive TPE-AZO-MA (TPE-azobenzene derived methacrylate) in a 1,4-dioxane/water mixture. Subsequently, polymeric micelles loaded with doxorubicin (DOX) in situ were successfully obtained by PISA. Furthermore, the release and fluorescence change of PISA-formed micelles loaded with DOX were studied in a simulated colon environment under the action of azoreductase. As expected, the drug-loaded micelles showed an effective DOX release during enzyme hydrolysis within 24 h owing to azo bond cleavage. Meanwhile, significant fluorescence enhancement was observed, accompanied by the release process. This was due to the aggregation-induced emission (AIE) performance of TPE being efficiently activated by elimination of the fluorescence resonance energy transfer (FRET) process, also owing to azo bond cleavage. Finally, the cytotoxicity and cellular uptake of the blank micelles and DOX-loaded micelles in vitro were evaluated.
- 27 April 2020
- Published by Royal Society of Chemistry (RSC) in Chemical Communications
- Vol. 56 (46) , 6237-6240
Smart azobenzene-containing tubular polymersomes: fabrication and multiple morphological tuning
A fundamental challenge in nanomaterial science is to facilely fabricate nonspherical polymersomes. Here, several kinds of novel tubular polymersomes were fabricated via self-assembly of amphiphilic azobenzene-containing block copolymers. Besides, their shape could be tuned by multiple approaches including changes in the chemical structure, self-assembly conditions and external stimuli.
- 27 April 2020
- Published by Royal Society of Chemistry (RSC) in Chemical Communications
- Vol. 56 (46) , 6237-6240
Smart azobenzene-containing tubular polymersomes: fabrication and multiple morphological tuning
A fundamental challenge in nanomaterial science is to facilely fabricate nonspherical polymersomes. Here, several kinds of novel tubular polymersomes were fabricated via self-assembly of amphiphilic azobenzene-containing block copolymers. Besides, their shape could be tuned by multiple approaches including changes in the chemical structure, self-assembly conditions and external stimuli.
- 20 November 2019
- Published by Royal Society of Chemistry (RSC) in Polymer Chemistry
- Vol. 11 (3) , 734-743
Real-time near-infrared fluorescence reporting the azoreductase-triggered drug release
A near-infrared fluorescent probe plays an important role in biosensing and bioimaging because of its high efficiency, sensitivity and negligible background interference in vivo. Azobenzene derivatives demonstrate well-known sensitivity to light and are unique enzyme-responsive candidates in drug delivery and biological detection because the azo double bond can be cleaved by azoreductase. Herein, a novel near-infrared probe of an amphiphilic block copolymer with biological compatibility was synthesized. The azobenzene group attached with the near-infrared fluorescent group AzaBODIPY (boron-dipyrromethenes) linked the hydrophilic (PEG) and hydrophobic (PLA) segments to form the amphiphilic block copolymer PEG-AzaBODIPY-AZO-PLA. PEG398-AzaBODIPY-AZO-PLA144 self-assembled into drug-loaded spherical micelles. The self-assemblies were non-fluorescent owing to the aggregation-induced quenching (ACQ) effect. Triggered by azoreductase, the PEG and PLA segments were disconnected due to the cleavage of the azo bond. This caused the disassembly of the micelles and the subsequent release of the encapsulated drug. Upon disassembly, the emission of the near-infrared fluorescence was activated by the elimination of the ACQ effect. Furthermore, the fluorescence intensity of the self-assemblies in solution increased continuously with drug release. The fluorescence reporting drug release demonstrates the potential applications in biosensing and controlled drug release in the colon of the human intestine.
- 20 November 2019
- Published by Royal Society of Chemistry (RSC) in Polymer Chemistry
- Vol. 11 (3) , 734-743
Real-time near-infrared fluorescence reporting the azoreductase-triggered drug release
A near-infrared fluorescent probe plays an important role in biosensing and bioimaging because of its high efficiency, sensitivity and negligible background interference in vivo. Azobenzene derivatives demonstrate well-known sensitivity to light and are unique enzyme-responsive candidates in drug delivery and biological detection because the azo double bond can be cleaved by azoreductase. Herein, a novel near-infrared probe of an amphiphilic block copolymer with biological compatibility was synthesized. The azobenzene group attached with the near-infrared fluorescent group AzaBODIPY (boron-dipyrromethenes) linked the hydrophilic (PEG) and hydrophobic (PLA) segments to form the amphiphilic block copolymer PEG-AzaBODIPY-AZO-PLA. PEG398-AzaBODIPY-AZO-PLA144 self-assembled into drug-loaded spherical micelles. The self-assemblies were non-fluorescent owing to the aggregation-induced quenching (ACQ) effect. Triggered by azoreductase, the PEG and PLA segments were disconnected due to the cleavage of the azo bond. This caused the disassembly of the micelles and the subsequent release of the encapsulated drug. Upon disassembly, the emission of the near-infrared fluorescence was activated by the elimination of the ACQ effect. Furthermore, the fluorescence intensity of the self-assemblies in solution increased continuously with drug release. The fluorescence reporting drug release demonstrates the potential applications in biosensing and controlled drug release in the colon of the human intestine.