Valdemir Alexandre dos Santos
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Valdemir Alexandre dos Santos has a total of 135 co-authors. Here are the top co-authors by number of shared publications:
- Leonie Asfora Sarubbo
School of Technology and Communication, Catholic University of Pernambuco (UNICAP), Príncipe Street, n. 526, Boa Vista, Recife 50050-900, Brazil
13 shared publications - Mohand Benachour
Department of Chemical Engineering, Federal University of Pernambuco (UFPE), Av. dos Economistas, s/n, Recife 50740-590, Brazil
12 shared publications - Leonardo Bandeira dos Santos
Advanced Institute of Technology and Innovation
9 shared publications - Holmer Savastano
Universidade de São Paulo, Brasil
6 shared publications - Rita de Cassia Freire Soares da Silva
Instituto Avançado de Tecnologia e Inovação (IATI), Rua Potyra, n. 31, Prado, Recife-Pernambuco 50751-310, Brazil
6 shared publications - Carlos Costa Dantas
Universidade Federal de Pernambuco
5 shared publications
Latest Publications
- Open Access
- 14 September 2026
- Published by Associação Brasileira de Engenharia Sanitária e Ambiental in Brazilian Journal of Environmental Sciences
- Vol. 61, e2921
Validated stoichiometric model for mineral phase quantification in commercial gypsums
Gypsum production is an energy-intensive process that contributes significantly to CO2 emissions, particularly in regions that rely on biomass or fossil fuels for calcination. Improving mineralogical control is essential for reducing energy waste and enhancing the environmental performance of the gypsum industry. This study proposes and validates a stoichiometric model implemented in Python to estimate the proportions of dihydrate, hemihydrate, and anhydrite in commercial gypsums based on chemical composition and hydration water. The model was applied to natural gypsum ore and commercial casting and plastering gypsums from the Araripe Gypsum Cluster, Brazil’s main production region. Differential thermogravimetric analysis (DTG) was used for validation, and strong agreement was observed between experimental and simulated results, with maximum deviations of approximately 2.11%. The findings demonstrate that accurate mineral phase estimation can support more precise control of calcination temperature and residence time. Consequently, the proposed model has the potential to contribute to reductions in specific fuel consumption, CO2 emissions, and mineral waste generation when incorporated into industrial process-control strategies. The proposed approach provides a low-cost and scalable tool for environmental monitoring and decision support in gypsum production. The novelty of this work, in contrast to conventional analytical approaches, lies in the development and experimental validation of a stoichiometric computational model capable of estimating gypsum mineral phases from chemical composition and hydration water content. The Python implementation constitutes an accessible computational platform that enables rapid application of the proposed model in research and industrial environments.
- 14 September 2026
- Published by Associação Brasileira de Engenharia Sanitária e Ambiental in Brazilian Journal of Environmental Sciences
- Vol. 61, e2921
Open AccessValidated stoichiometric model for mineral phase quantification in commercial gypsums
Gypsum production is an energy-intensive process that contributes significantly to CO2 emissions, particularly in regions that rely on biomass or fossil fuels for calcination. Improving mineralogical control is essential for reducing energy waste and enhancing the environmental performance of the gypsum industry. This study proposes and validates a stoichiometric model implemented in Python to estimate the proportions of dihydrate, hemihydrate, and anhydrite in commercial gypsums based on chemical composition and hydration water. The model was applied to natural gypsum ore and commercial casting and plastering gypsums from the Araripe Gypsum Cluster, Brazil’s main production region. Differential thermogravimetric analysis (DTG) was used for validation, and strong agreement was observed between experimental and simulated results, with maximum deviations of approximately 2.11%. The findings demonstrate that accurate mineral phase estimation can support more precise control of calcination temperature and residence time. Consequently, the proposed model has the potential to contribute to reductions in specific fuel consumption, CO2 emissions, and mineral waste generation when incorporated into industrial process-control strategies. The proposed approach provides a low-cost and scalable tool for environmental monitoring and decision support in gypsum production. The novelty of this work, in contrast to conventional analytical approaches, lies in the development and experimental validation of a stoichiometric computational model capable of estimating gypsum mineral phases from chemical composition and hydration water content. The Python implementation constitutes an accessible computational platform that enables rapid application of the proposed model in research and industrial environments.
- Open Access
Development, Electrochemical Characterization, and Statistical Optimization of a Low-Cost Membraneless Tubular Flow-By Alkaline Electrolyzer for Green Hydrogen Production
Hydrogen production by alkaline water electrolysis is a promising pathway for sustainable energy systems; however, conventional electrolyzers rely on membranes or diaphragms that increase cost, electrical resistance, and maintenance requirements. This study reports the development and experimental evaluation of a low-cost, membrane-less, flow-by tubular alkaline electrolyzer integrated with a dedicated gas–liquid separation and volumetric gas-measurement system. The electrolyzer was designed, constructed, experimentally validated, and electrochemically characterized using polarization curves. The effects of KOH concentration (0.50–2.00 mol L−1), electrolyte flow rate (1.00–4.00 L min−1), and applied voltage (2.20–3.20 V) on hydrogen production were investigated through a full factorial 33 experimental design combined with analysis of variance, response surface methodology, and numerical optimization using the desirability function. The applied voltage was identified as the dominant operating variable, followed by KOH concentration and electrolyte flow rate, while significant interactions involving voltage were also observed. The quadratic regression model showed excellent predictive performance (R2 = 0.9614), and within the investigated operating domain, the highest hydrogen production rate was obtained at 2.00 mol L−1 KOH, 1.00 L min−1 electrolyte flow rate, and 3.20 V, resulting in an experimental hydrogen production rate of 0.4395 mL s−1. These findings demonstrate the potential of the proposed membrane-less flow-by electrolyzer as a simplified, low-cost, and experimentally validated platform for investigating and optimizing membrane-less alkaline water electrolysis under the evaluated operating conditions.
Open AccessDevelopment, Electrochemical Characterization, and Statistical Optimization of a Low-Cost Membraneless Tubular Flow-By Alkaline Electrolyzer for Green Hydrogen Production
Hydrogen production by alkaline water electrolysis is a promising pathway for sustainable energy systems; however, conventional electrolyzers rely on membranes or diaphragms that increase cost, electrical resistance, and maintenance requirements. This study reports the development and experimental evaluation of a low-cost, membrane-less, flow-by tubular alkaline electrolyzer integrated with a dedicated gas–liquid separation and volumetric gas-measurement system. The electrolyzer was designed, constructed, experimentally validated, and electrochemically characterized using polarization curves. The effects of KOH concentration (0.50–2.00 mol L−1), electrolyte flow rate (1.00–4.00 L min−1), and applied voltage (2.20–3.20 V) on hydrogen production were investigated through a full factorial 33 experimental design combined with analysis of variance, response surface methodology, and numerical optimization using the desirability function. The applied voltage was identified as the dominant operating variable, followed by KOH concentration and electrolyte flow rate, while significant interactions involving voltage were also observed. The quadratic regression model showed excellent predictive performance (R2 = 0.9614), and within the investigated operating domain, the highest hydrogen production rate was obtained at 2.00 mol L−1 KOH, 1.00 L min−1 electrolyte flow rate, and 3.20 V, resulting in an experimental hydrogen production rate of 0.4395 mL s−1. These findings demonstrate the potential of the proposed membrane-less flow-by electrolyzer as a simplified, low-cost, and experimentally validated platform for investigating and optimizing membrane-less alkaline water electrolysis under the evaluated operating conditions.
- Open Access
- 11 March 2026
- Published by Springer Nature in Brazilian Journal of Chemical Engineering
- p. 1-15
CFD Simulation and experimental validation of a circulating fluidized bed riser with gamma transmission measurements
This work investigates the hydrodynamics of a circulating fluidized-bed riser by combining CFD simulations with noninvasive gamma-radiation transmission measurements. Two drag models, Gidaspow and EMMS, were evaluated. The computational setup underwent mesh-independence verification using the Grid Convergence Index, and model performance was quantified against experiments with RMSE and NRMSE. The analysis shows that EMMS generally provides closer agreement with measured solids volume-fraction profiles, particularly in the dilute core and in regions prone to particle clustering, while both models reproduce the principal axial and radial trends. In some sections with lower local solids concentration, Gidaspow tends to underestimate the solids holdup. Predictions of axial pressure variation are consistent with experimental tendencies for both closures. The integrated use of gamma-radiation diagnostics and CFD is shown to be effective for validating model predictions and for guiding model selection in riser simulations, balancing accuracy and computational cost. These results provide a documented, reproducible basis for simulations of gas–solid flows in circulating fluidized-bed systems and inform design and optimization decisions where reliable estimates of cross-sectional solids distribution are required.
- 11 March 2026
- Published by Springer Nature in Brazilian Journal of Chemical Engineering
- p. 1-15
Open AccessCFD Simulation and experimental validation of a circulating fluidized bed riser with gamma transmission measurements
This work investigates the hydrodynamics of a circulating fluidized-bed riser by combining CFD simulations with noninvasive gamma-radiation transmission measurements. Two drag models, Gidaspow and EMMS, were evaluated. The computational setup underwent mesh-independence verification using the Grid Convergence Index, and model performance was quantified against experiments with RMSE and NRMSE. The analysis shows that EMMS generally provides closer agreement with measured solids volume-fraction profiles, particularly in the dilute core and in regions prone to particle clustering, while both models reproduce the principal axial and radial trends. In some sections with lower local solids concentration, Gidaspow tends to underestimate the solids holdup. Predictions of axial pressure variation are consistent with experimental tendencies for both closures. The integrated use of gamma-radiation diagnostics and CFD is shown to be effective for validating model predictions and for guiding model selection in riser simulations, balancing accuracy and computational cost. These results provide a documented, reproducible basis for simulations of gas–solid flows in circulating fluidized-bed systems and inform design and optimization decisions where reliable estimates of cross-sectional solids distribution are required.
- Open Access
- 1 January 2026
- Published by FapUNIFESP (SciELO) in Anais da Academia Brasileira de Ciências
- Vol. 98 (3)
Ultrasound-based control of water hyacinth proliferation in tropical reservoirs: experimental design and acoustic attenuation modeling
The proliferation of floating macrophytes such as Eichhornia crassipes, driven by eutrophication, compromises the ecological and operational quality of hydroelectric reservoirs. This study developed and evaluated an ultrasonic (US) system for controlling this species. Controlled experiments tested frequencies of 40, 80, and 120 kHz, identifying 40 kHz as the most effective. E. crassipes seedlings were exposed daily to US in pure and eutrophic water. Growth and seed production were assessed through physical, visual, and photographic analyses. US exposure reduced growth rates, inhibited flowering, and decreased seed production compared to the control group. Acoustic modeling indicated an average attenuation coefficient of 1.00 × 10⁻⁴ dB/cm in eutrophic water. Based on simulated acoustic signal decay derived from experimentally obtained attenuation coefficients, the system using piezoelectric transducers operating at 40 kHz showed a theoretically estimated effective operational range of up to approximately 50 m per transducer, not validated by field tests. The system features an adaptable design and consistent performance across different water compositions, offering a scalable approach for macrophyte control. Continuous environmental monitoring is recommended to ensure efficiency and ecological safety. Overall, US represents a promising and sustainable alternative for macrophyte management, considering potential effects on non-target organisms and environmental variability.
- 1 January 2026
- Published by FapUNIFESP (SciELO) in Anais da Academia Brasileira de Ciências
- Vol. 98 (3)
Open AccessUltrasound-based control of water hyacinth proliferation in tropical reservoirs: experimental design and acoustic attenuation modeling
The proliferation of floating macrophytes such as Eichhornia crassipes, driven by eutrophication, compromises the ecological and operational quality of hydroelectric reservoirs. This study developed and evaluated an ultrasonic (US) system for controlling this species. Controlled experiments tested frequencies of 40, 80, and 120 kHz, identifying 40 kHz as the most effective. E. crassipes seedlings were exposed daily to US in pure and eutrophic water. Growth and seed production were assessed through physical, visual, and photographic analyses. US exposure reduced growth rates, inhibited flowering, and decreased seed production compared to the control group. Acoustic modeling indicated an average attenuation coefficient of 1.00 × 10⁻⁴ dB/cm in eutrophic water. Based on simulated acoustic signal decay derived from experimentally obtained attenuation coefficients, the system using piezoelectric transducers operating at 40 kHz showed a theoretically estimated effective operational range of up to approximately 50 m per transducer, not validated by field tests. The system features an adaptable design and consistent performance across different water compositions, offering a scalable approach for macrophyte control. Continuous environmental monitoring is recommended to ensure efficiency and ecological safety. Overall, US represents a promising and sustainable alternative for macrophyte management, considering potential effects on non-target organisms and environmental variability.
- Open Access
- 3 November 2025
- Published by Brazilian Journals in Caderno Pedagógico
- Vol. 22 (13) , e21477
Catalytic recovery of sulfur contained in H₂S assisted by ultrasonic waves: a sustainable approach for the desulfurization of industrial gases
This work presents a study on the catalytic recovery of elemental sulfur from hydrogen sulfide gas (H₂S) using a Fe/EDTA solution assisted by ultrasonic waves in a continuous stirred-tank reactor (CSTR) at bench scale. The introduction of ultrasonic cavitation (1.7 MHz) promoted intense atomization of the catalytic solution, enhancing the gas–liquid interface and conversion efficiency. The determined rate constant was k = 1.4329 L·mol⁻¹·s⁻¹, and the reaction order, n = 1.5, indicating a complex fractional-order kinetics. Experimental optimization identified an ideal molar ratio of H₂S:Fe/EDTA = 1:3 and an average residence time of 19.2 s, resulting in a conversion efficiency above 98%. The process demonstrated high operational stability, with continuous catalyst regeneration and efficient precipitation of high-purity sulfur. The kinetic modeling was simulated in Python, validating the experimental data and reinforcing the potential for industrial scale-up. This study contributes to the development of clean technologies and sustainable biotechnological processes, applicable to biogas purification and mitigation of toxic sulfur compounds.
- 3 November 2025
- Published by Brazilian Journals in Caderno Pedagógico
- Vol. 22 (13) , e21477
Open AccessCatalytic recovery of sulfur contained in H₂S assisted by ultrasonic waves: a sustainable approach for the desulfurization of industrial gases
This work presents a study on the catalytic recovery of elemental sulfur from hydrogen sulfide gas (H₂S) using a Fe/EDTA solution assisted by ultrasonic waves in a continuous stirred-tank reactor (CSTR) at bench scale. The introduction of ultrasonic cavitation (1.7 MHz) promoted intense atomization of the catalytic solution, enhancing the gas–liquid interface and conversion efficiency. The determined rate constant was k = 1.4329 L·mol⁻¹·s⁻¹, and the reaction order, n = 1.5, indicating a complex fractional-order kinetics. Experimental optimization identified an ideal molar ratio of H₂S:Fe/EDTA = 1:3 and an average residence time of 19.2 s, resulting in a conversion efficiency above 98%. The process demonstrated high operational stability, with continuous catalyst regeneration and efficient precipitation of high-purity sulfur. The kinetic modeling was simulated in Python, validating the experimental data and reinforcing the potential for industrial scale-up. This study contributes to the development of clean technologies and sustainable biotechnological processes, applicable to biogas purification and mitigation of toxic sulfur compounds.
- Open Access
- 2 October 2025
- Published by Brazilian Journals in Caderno Pedagógico
- Vol. 22 (12) , e20766
Microbubble technology applied to recirculating aquaculture systems (RAS): a critical review for sustainable tilapia farming
This systematic review investigates the application of microbubble technology in aquaculture, emphasizing its effects on water quality, fish health, and sustainable production. As the demand for intensive and environmentally friendly aquaculture systems grows, oxygenation technologies have become critical to improving production efficiency and animal welfare. Following PRISMA guidelines, articles were retrieved from Scopus, Web of Science, and Google Scholar databases using the descriptors “microbubble,” “nanobubble,” and “aquaculture.” After screening for duplicates and evaluating titles, abstracts, and full texts, a final set of relevant articles was selected for in-depth analysis. The findings demonstrate that microbubble and nanobubble systems offer superior oxygen transfer efficiency compared to traditional aeration methods, improving dissolved oxygen levels and promoting fish immunity and stress resistance. Applications in tilapia culture, integrated aquaculture systems, and biofloc environments show enhanced productivity and reduced dependence on antibiotics. Furthermore, microbubble use supports environmental sustainability by improving biodiversity and nutrient cycling. However, barriers such as high initial implementation costs, lack of standardized operational protocols, and limited technical knowledge among producers still hinder widespread adoption. The review highlights the need for economic feasibility studies, producer training, and integration with other sustainable practices to maximize the benefits of this emerging technology. These findings provide valuable insights for researchers, policymakers, and aquaculture practitioners aiming to modernize production systems through sustainable innovation.
- 2 October 2025
- Published by Brazilian Journals in Caderno Pedagógico
- Vol. 22 (12) , e20766
Open AccessMicrobubble technology applied to recirculating aquaculture systems (RAS): a critical review for sustainable tilapia farming
This systematic review investigates the application of microbubble technology in aquaculture, emphasizing its effects on water quality, fish health, and sustainable production. As the demand for intensive and environmentally friendly aquaculture systems grows, oxygenation technologies have become critical to improving production efficiency and animal welfare. Following PRISMA guidelines, articles were retrieved from Scopus, Web of Science, and Google Scholar databases using the descriptors “microbubble,” “nanobubble,” and “aquaculture.” After screening for duplicates and evaluating titles, abstracts, and full texts, a final set of relevant articles was selected for in-depth analysis. The findings demonstrate that microbubble and nanobubble systems offer superior oxygen transfer efficiency compared to traditional aeration methods, improving dissolved oxygen levels and promoting fish immunity and stress resistance. Applications in tilapia culture, integrated aquaculture systems, and biofloc environments show enhanced productivity and reduced dependence on antibiotics. Furthermore, microbubble use supports environmental sustainability by improving biodiversity and nutrient cycling. However, barriers such as high initial implementation costs, lack of standardized operational protocols, and limited technical knowledge among producers still hinder widespread adoption. The review highlights the need for economic feasibility studies, producer training, and integration with other sustainable practices to maximize the benefits of this emerging technology. These findings provide valuable insights for researchers, policymakers, and aquaculture practitioners aiming to modernize production systems through sustainable innovation.
- Open Access
- 1 September 2025
- Published by Brazilian Journals in Caderno Pedagógico
- Vol. 22 (11) , e20292
Ultrasonic extraction of tannins from native caatinga species for use as a biocoagulant in the brewing industry
The growing demand for sustainable industrial practices has driven the search for eco-friendly alternatives in the treatment of brewery effluents. Tannin-derived bio-based coagulants have emerged as promising substitutes for inorganic coagulants, which pose risks to both the environment and human health. This review aims to examine the development of bio-based coagulants through ultrasound-assisted tannin extraction, as well as their application in the treatment of brewery effluents. Studies indicate that ultrasound-assisted extraction is effective in obtaining tannins and yields better performance compared to conventional methods. In the context of breweries, bio-based coagulants have demonstrated high efficiency in turbidity and color removal, with the added advantage of generating biodegradable sludge. Additionally, several native species from the Caatinga biome are known to have potential for tannin extraction, although many remain unexplored for industrial wastewater treatment purposes. It can be concluded that the combination of ultrasound-assisted extraction and the use of bio-based coagulants represents a promising and environmentally friendly strategy for industrial wastewater treatment, with potential for large-scale application. However, further research is required to assess the economic and operational feasibility of these technologies.
- 1 September 2025
- Published by Brazilian Journals in Caderno Pedagógico
- Vol. 22 (11) , e20292
Open AccessUltrasonic extraction of tannins from native caatinga species for use as a biocoagulant in the brewing industry
The growing demand for sustainable industrial practices has driven the search for eco-friendly alternatives in the treatment of brewery effluents. Tannin-derived bio-based coagulants have emerged as promising substitutes for inorganic coagulants, which pose risks to both the environment and human health. This review aims to examine the development of bio-based coagulants through ultrasound-assisted tannin extraction, as well as their application in the treatment of brewery effluents. Studies indicate that ultrasound-assisted extraction is effective in obtaining tannins and yields better performance compared to conventional methods. In the context of breweries, bio-based coagulants have demonstrated high efficiency in turbidity and color removal, with the added advantage of generating biodegradable sludge. Additionally, several native species from the Caatinga biome are known to have potential for tannin extraction, although many remain unexplored for industrial wastewater treatment purposes. It can be concluded that the combination of ultrasound-assisted extraction and the use of bio-based coagulants represents a promising and environmentally friendly strategy for industrial wastewater treatment, with potential for large-scale application. However, further research is required to assess the economic and operational feasibility of these technologies.
- Open Access
- 2 July 2025
- Published by Brazilian Journals in Caderno Pedagógico
- Vol. 22 (9) , e18105
Kinetic and technological perspectives on the conversion of Araripe gypsum into commercial β-hemihydrate: a comprehensive review
This review examines the processes involved in converting gypsum from the Araripe Gypsum Pole (PGA) into commercial hemihydrate, emphasizing dehydration kinetics, calcination technologies, and sustainability challenges. The study explores the influence of operational parameters—such as temperature, residence time, and water vapor control - on phase formation and product quality. Different furnace types are assessed in terms of energy efficiency, emission profiles, and automation potential. Special attention is given to kinetic models, including diffusion-based and nucleation-growth mechanisms, and their applicability in real-time process control. Through a comparative analysis of academic and industrial data, this review identifies key research gaps, such as the need for industrial validation of kinetic models, improved control systems, and adoption of alternative energy sources. The review concludes by proposing future research directions that include the integration of circular economy principles, advanced monitoring techniques, and stronger academia-industry collaboration to enhance the competitiveness and environmental performance of the gypsum industry in the region.
- 2 July 2025
- Published by Brazilian Journals in Caderno Pedagógico
- Vol. 22 (9) , e18105
Open AccessKinetic and technological perspectives on the conversion of Araripe gypsum into commercial β-hemihydrate: a comprehensive review
This review examines the processes involved in converting gypsum from the Araripe Gypsum Pole (PGA) into commercial hemihydrate, emphasizing dehydration kinetics, calcination technologies, and sustainability challenges. The study explores the influence of operational parameters—such as temperature, residence time, and water vapor control - on phase formation and product quality. Different furnace types are assessed in terms of energy efficiency, emission profiles, and automation potential. Special attention is given to kinetic models, including diffusion-based and nucleation-growth mechanisms, and their applicability in real-time process control. Through a comparative analysis of academic and industrial data, this review identifies key research gaps, such as the need for industrial validation of kinetic models, improved control systems, and adoption of alternative energy sources. The review concludes by proposing future research directions that include the integration of circular economy principles, advanced monitoring techniques, and stronger academia-industry collaboration to enhance the competitiveness and environmental performance of the gypsum industry in the region.
- Open Access
- 27 February 2025
- Published by Zeppelini Editorial e Comunicacao in Brazilian Journal of Environmental Sciences
- Vol. 60, e2218
Analysis of a photovoltaic-thermal with heat pump system for engine heating in thermal power plants
This study performed a computational analysis and experimental validation of a hybrid photovoltaic-thermal (PVT) system combined with a heat pump for engine heating in thermal power plants. Using the Ansys Fluent software for computational fluid dynamics simulations, the research examined the thermal performance and efficiency of the PVT system under real operating conditions. The simulations confirmed that the PVT system could achieve high thermal efficiency, especially during periods of maximum solar radiation. The mesh model used in the simulations comprised 6,589,347 elements, refined to capture the details of fluid flow and heat transfer. The results indicated that the maximum outlet water temperature reached 315 K, while the experimental tests showed a maximum temperature of 328.15 K. The maximum thermal efficiency observed was 73% at noon. The study also demonstrated the feasibility of scaling up the system from a bench-scale prototype to industrial applications. By employing the Boussinesq approximation and maintaining the dimensionless Reynolds, Nusselt, Prandtl, Grashof, and Rayleigh numbers, the downscaled simulations were shown to be reliable and comparable to full-scale systems. The integration of the PVT system with a heat pump proved to be effective in reducing fossil fuel consumption, enabling simultaneous generation of electricity and heat, thereby improving energy efficiency and reducing operating costs in industrial settings. The PVT system faces climate constraints, high costs, and industrial integration challenges. The present study acknowledges the challenges in the widespread adoption of PVT systems and suggests future research to optimize these systems in diverse climatic and geographic contexts.
- 27 February 2025
- Published by Zeppelini Editorial e Comunicacao in Brazilian Journal of Environmental Sciences
- Vol. 60, e2218
Open AccessAnalysis of a photovoltaic-thermal with heat pump system for engine heating in thermal power plants
This study performed a computational analysis and experimental validation of a hybrid photovoltaic-thermal (PVT) system combined with a heat pump for engine heating in thermal power plants. Using the Ansys Fluent software for computational fluid dynamics simulations, the research examined the thermal performance and efficiency of the PVT system under real operating conditions. The simulations confirmed that the PVT system could achieve high thermal efficiency, especially during periods of maximum solar radiation. The mesh model used in the simulations comprised 6,589,347 elements, refined to capture the details of fluid flow and heat transfer. The results indicated that the maximum outlet water temperature reached 315 K, while the experimental tests showed a maximum temperature of 328.15 K. The maximum thermal efficiency observed was 73% at noon. The study also demonstrated the feasibility of scaling up the system from a bench-scale prototype to industrial applications. By employing the Boussinesq approximation and maintaining the dimensionless Reynolds, Nusselt, Prandtl, Grashof, and Rayleigh numbers, the downscaled simulations were shown to be reliable and comparable to full-scale systems. The integration of the PVT system with a heat pump proved to be effective in reducing fossil fuel consumption, enabling simultaneous generation of electricity and heat, thereby improving energy efficiency and reducing operating costs in industrial settings. The PVT system faces climate constraints, high costs, and industrial integration challenges. The present study acknowledges the challenges in the widespread adoption of PVT systems and suggests future research to optimize these systems in diverse climatic and geographic contexts.
- Open Access
- 11 September 2024
- Published by Zeppelini Editorial e Comunicacao in Brazilian Journal of Environmental Sciences
- Vol. 59, e1912
Revolutionizing green hydrogen production: the impact of ultrasonic fields
Este artigo revisa a utilização de campos ultrassônicos na eletrólise alcalina para produção de hidrogênio verde, destacando benefícios e desafios dessa tecnologia emergente. A aplicação de ultrassom pode aumentar significativamente a eficiência da eletrólise, reduzindo sobretensões e otimizando a transferência de massa. Dados quantitativos da Tabela 1 mostram que a integração de ultrassom pode reduzir a resistência ôhmica em até 76% e aumentar a eficiência de produção de hidrogênio em até 28%. Por exemplo, em condições otimizadas, a produção de hidrogênio pode ser aumentada em 45%, com uma economia de energia variando de 10 a 25%. A revisão examina o impacto do ultrassom na remoção de bolhas de gás das superfícies dos eletrodos e avalia o uso de transdutores ultrassônicos em diferentes configurações experimentais. A eficácia do ultrassom em frequências específicas (20–100kHz) e intensidades ajustáveis (10–1000W/cm²) é discutida em termos de melhoria da transferência de massa e redução da resistência ôhmica. Apesar dos benefícios, desafios técnicos como a seleção de materiais resistentes e o controle preciso das condições de operação são destacados. O artigo sugere que futuras pesquisas devem focar na integração de tecnologias ultrassônicas em sistemas de energia renovável, combinando ultrassom com técnicas avançadas para otimizar a eletrólise de hidrogênio de forma sustentável e econômica.
- 11 September 2024
- Published by Zeppelini Editorial e Comunicacao in Brazilian Journal of Environmental Sciences
- Vol. 59, e1912
Open AccessRevolutionizing green hydrogen production: the impact of ultrasonic fields
Este artigo revisa a utilização de campos ultrassônicos na eletrólise alcalina para produção de hidrogênio verde, destacando benefícios e desafios dessa tecnologia emergente. A aplicação de ultrassom pode aumentar significativamente a eficiência da eletrólise, reduzindo sobretensões e otimizando a transferência de massa. Dados quantitativos da Tabela 1 mostram que a integração de ultrassom pode reduzir a resistência ôhmica em até 76% e aumentar a eficiência de produção de hidrogênio em até 28%. Por exemplo, em condições otimizadas, a produção de hidrogênio pode ser aumentada em 45%, com uma economia de energia variando de 10 a 25%. A revisão examina o impacto do ultrassom na remoção de bolhas de gás das superfícies dos eletrodos e avalia o uso de transdutores ultrassônicos em diferentes configurações experimentais. A eficácia do ultrassom em frequências específicas (20–100kHz) e intensidades ajustáveis (10–1000W/cm²) é discutida em termos de melhoria da transferência de massa e redução da resistência ôhmica. Apesar dos benefícios, desafios técnicos como a seleção de materiais resistentes e o controle preciso das condições de operação são destacados. O artigo sugere que futuras pesquisas devem focar na integração de tecnologias ultrassônicas em sistemas de energia renovável, combinando ultrassom com técnicas avançadas para otimizar a eletrólise de hidrogênio de forma sustentável e econômica.