Ken Van Alsenoy
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Ken Van Alsenoy has a total of 39 co-authors. Here are the top co-authors by number of shared publications:
- Olivier Girard
The University of Western Australia
6 shared publications Joong Hyun Ryu
Sports Science Department, Aspire Academy, Doha, Qatar
3 shared publicationsDerek Santos
2 shared publications- Derek Santos
Queen Margaret University
2 shared publications - Joong Hyun Ryu
Aspire Academy
2 shared publications Joris De Schepper
2 shared publications
Latest Publications
- Open Access
- 28 March 2026
- Published by Elsevier in Next Research
- Vol. 9
Effects of light footwear on gait mechanics and comfort during walking: A systematic review and meta-analysis
- 28 March 2026
- Published by Elsevier in Next Research
- Vol. 9
Open AccessEffects of light footwear on gait mechanics and comfort during walking: A systematic review and meta-analysis
- Open Access
- 7 October 2025
- Published by Taylor & Francis in Journal of Sports Sciences
- Vol. 44 (2) , 181-192
No effect of custom foot orthoses manufactured from EVA and/or TPU materials and sex on mechanical asymmetries during treadmill running in trained runners
We investigated the influence of custom foot orthoses and sex on mechanical asymmetries during treadmill running. Eighteen trained, injury-free individuals (9 females) ran six minutes at 10% below their first ventilatory threshold (average speed: 9.9 ± 1.3 km/h) on an instrumented treadmill under four footwear conditions: original shoe liner (control), two custom orthotics [EVA and TPU], and a hybrid (EVA heel, TPU forefoot). Vertical and antero-posterior ground reaction forces were recorded after ~5 minutes, encompassing 40 steps. Mechanical asymmetry was assessed using the 'symmetry angle' (SA) score. No significant main effects were found for condition (all P ≥ 0.302), sex (P ≥ 0.137), or condition × sex interactions (P ≥ 0.063). Mean SA scores were <2% for contact time (0.39 ± 0.23%), flight time (1.90 ± 1.35%), step frequency (0.34 ± 0.26%), peak vertical force (1.44 ± 1.15%), and mean vertical loading rate (1.79 ± 1.17%). Vertical and leg stiffness had SA scores of 3.11 ± 1.73% and 1.86 ± 1.00%. For braking (1.56 ± 0.78%) and push-off (1.54 ± 0.81%) phases, and peak braking (2.94 ± 1.61%) and push-off (2.33 ± 1.17%) forces, SA scores ranged from ~1.5-3.0%. Both sexes exhibited even strides, with orthoses not affecting natural asymmetries. Orthoses of similar shape but different materials are unlikely to alter gait symmetry, suggesting unilateral assessments may suffice and reduce testing demands.
- 7 October 2025
- Published by Taylor & Francis in Journal of Sports Sciences
- Vol. 44 (2) , 181-192
Open AccessNo effect of custom foot orthoses manufactured from EVA and/or TPU materials and sex on mechanical asymmetries during treadmill running in trained runners
We investigated the influence of custom foot orthoses and sex on mechanical asymmetries during treadmill running. Eighteen trained, injury-free individuals (9 females) ran six minutes at 10% below their first ventilatory threshold (average speed: 9.9 ± 1.3 km/h) on an instrumented treadmill under four footwear conditions: original shoe liner (control), two custom orthotics [EVA and TPU], and a hybrid (EVA heel, TPU forefoot). Vertical and antero-posterior ground reaction forces were recorded after ~5 minutes, encompassing 40 steps. Mechanical asymmetry was assessed using the 'symmetry angle' (SA) score. No significant main effects were found for condition (all P ≥ 0.302), sex (P ≥ 0.137), or condition × sex interactions (P ≥ 0.063). Mean SA scores were <2% for contact time (0.39 ± 0.23%), flight time (1.90 ± 1.35%), step frequency (0.34 ± 0.26%), peak vertical force (1.44 ± 1.15%), and mean vertical loading rate (1.79 ± 1.17%). Vertical and leg stiffness had SA scores of 3.11 ± 1.73% and 1.86 ± 1.00%. For braking (1.56 ± 0.78%) and push-off (1.54 ± 0.81%) phases, and peak braking (2.94 ± 1.61%) and push-off (2.33 ± 1.17%) forces, SA scores ranged from ~1.5-3.0%. Both sexes exhibited even strides, with orthoses not affecting natural asymmetries. Orthoses of similar shape but different materials are unlikely to alter gait symmetry, suggesting unilateral assessments may suffice and reduce testing demands.
- Open Access
No Effect of EVA and TPU Custom Foot Orthoses on Mechanical Asymmetries during Acute Intense Fatigue
This study examined the impact of custom foot orthoses made of ethyl-vinyl acetate (EVA) and expanded thermoplastic polyurethane (TPU) materials, both compared to a control condition (CON; shoes only), on mechanical asymmetries during repeated treadmill sprints. Eighteen well-trained male runners executed eight, 5-s sprints (rest: 25 s) on an instrumented motorized treadmill in three footwear conditions (EVA, TPU, and CON). We evaluated the group mean asymmetry scores using the ‘symmetry angle’ (SA) formula, which assigns a score of 0% for perfect symmetry and a score of 100% for perfect asymmetry. There was no condition (all p ≥ 0.053) or time (p ≥ 0.074) main effects, nor were there any significant time × condition interactions on SA scores for any variables (p ≥ 0.640). Mean vertical, horizontal, and total forces presented mean SA values (pooled values for the three conditions) of 2.6 ± 1.9%, 2.9 ± 1.6%, and 2.4 ± 1.8%, respectively. Mean SA scores were ~1–3% for contact time (1.5 ± 0.5%), flight time (3.0 ± 0.3%), step frequency (1.1 ± 0.5%), step length (1.9 ± 0.7%), vertical stiffness (2.1 ± 0.9%), and leg stiffness (2.4 ± 1.1%). Mean SA scores were ~2–6.5% for duration of braking (4.1 ± 1.6%) and propulsive (2.4 ± 1.0%) phases, and peak braking (6.2 ± 2.9%) and propulsive (2.1 ± 1.4%) forces. In well-trained runners facing intense fatigue, wearing custom foot orthoses did not modify the observed low-to-moderate natural stride mechanical asymmetries.
Open AccessNo Effect of EVA and TPU Custom Foot Orthoses on Mechanical Asymmetries during Acute Intense Fatigue
This study examined the impact of custom foot orthoses made of ethyl-vinyl acetate (EVA) and expanded thermoplastic polyurethane (TPU) materials, both compared to a control condition (CON; shoes only), on mechanical asymmetries during repeated treadmill sprints. Eighteen well-trained male runners executed eight, 5-s sprints (rest: 25 s) on an instrumented motorized treadmill in three footwear conditions (EVA, TPU, and CON). We evaluated the group mean asymmetry scores using the ‘symmetry angle’ (SA) formula, which assigns a score of 0% for perfect symmetry and a score of 100% for perfect asymmetry. There was no condition (all p ≥ 0.053) or time (p ≥ 0.074) main effects, nor were there any significant time × condition interactions on SA scores for any variables (p ≥ 0.640). Mean vertical, horizontal, and total forces presented mean SA values (pooled values for the three conditions) of 2.6 ± 1.9%, 2.9 ± 1.6%, and 2.4 ± 1.8%, respectively. Mean SA scores were ~1–3% for contact time (1.5 ± 0.5%), flight time (3.0 ± 0.3%), step frequency (1.1 ± 0.5%), step length (1.9 ± 0.7%), vertical stiffness (2.1 ± 0.9%), and leg stiffness (2.4 ± 1.1%). Mean SA scores were ~2–6.5% for duration of braking (4.1 ± 1.6%) and propulsive (2.4 ± 1.0%) phases, and peak braking (6.2 ± 2.9%) and propulsive (2.1 ± 1.4%) forces. In well-trained runners facing intense fatigue, wearing custom foot orthoses did not modify the observed low-to-moderate natural stride mechanical asymmetries.
- Open Access
- 24 February 2022
- Published by Springer Nature in European Journal of Applied Physiology
- Vol. 122 (5) , 1179-1187
Acute intense fatigue does not modify the effect of EVA and TPU custom foot orthoses on running mechanics, running economy and perceived comfort
We determined whether fatigue modifies the effect of custom foot orthoses manufactured from ethyl-vinyl acetate (EVA) and expanded thermoplastic polyurethane (TPU) materials, both compared to standardized footwear (CON), on running mechanics, running economy, and perceived comfort. Eighteen well-trained, males ran on an instrumented treadmill for 6 min at the speed corresponding to their first ventilatory threshold (13.8 ± 1.1 km/h) in three footwear conditions (CON, EVA, and TPU). Immediately after completion of a repeated-sprints exercise (8 × 5 s treadmill sprints, rest = 25 s), these run tests were replicated. Running mechanics, running economy and perceived comfort were determined. Two-way repeated measures ANOVA [condition (CON, EVA, and TPU) × fatigue (fresh and fatigued)] were conducted. Flight time shortened (P = 0.026), peak braking (P = 0.016) and push-off (P = 0.032) forces decreased and vertical stiffness increased (P = 0.014) from before to after the repeated-sprint exercise, independent of footwear condition. There was a global fatigue-induced deterioration in running economy (− 1.6 ± 0.4%; P < 0.001). There was no significant condition × fatigue [except mean loading rate (P = 0.046)] for the large majority of biomechanical, cardio-respiratory [except minute ventilation (P = 0.020) and breathing frequency (P = 0.019)] and perceived comfort variables. Acute intense fatigue does not modify the effect of custom foot orthoses with different resilience characteristics on running mechanics, running economy and perceived comfort.
- 24 February 2022
- Published by Springer Nature in European Journal of Applied Physiology
- Vol. 122 (5) , 1179-1187
Open AccessAcute intense fatigue does not modify the effect of EVA and TPU custom foot orthoses on running mechanics, running economy and perceived comfort
We determined whether fatigue modifies the effect of custom foot orthoses manufactured from ethyl-vinyl acetate (EVA) and expanded thermoplastic polyurethane (TPU) materials, both compared to standardized footwear (CON), on running mechanics, running economy, and perceived comfort. Eighteen well-trained, males ran on an instrumented treadmill for 6 min at the speed corresponding to their first ventilatory threshold (13.8 ± 1.1 km/h) in three footwear conditions (CON, EVA, and TPU). Immediately after completion of a repeated-sprints exercise (8 × 5 s treadmill sprints, rest = 25 s), these run tests were replicated. Running mechanics, running economy and perceived comfort were determined. Two-way repeated measures ANOVA [condition (CON, EVA, and TPU) × fatigue (fresh and fatigued)] were conducted. Flight time shortened (P = 0.026), peak braking (P = 0.016) and push-off (P = 0.032) forces decreased and vertical stiffness increased (P = 0.014) from before to after the repeated-sprint exercise, independent of footwear condition. There was a global fatigue-induced deterioration in running economy (− 1.6 ± 0.4%; P < 0.001). There was no significant condition × fatigue [except mean loading rate (P = 0.046)] for the large majority of biomechanical, cardio-respiratory [except minute ventilation (P = 0.020) and breathing frequency (P = 0.019)] and perceived comfort variables. Acute intense fatigue does not modify the effect of custom foot orthoses with different resilience characteristics on running mechanics, running economy and perceived comfort.
- Open Access
- 21 November 2021
- Published by Wiley in European Journal of Sport Science
- Vol. 23 (1) , 121-133
Increased footwear comfort is associated with improved running economy – a systematic review and meta‐analysis
Footwear with or without custom foot orthotics have the potential to improve comfort, but the link with running performance needs further investigation. We systematically reviewed the association of footwear comfort on running economy in recreational runners. Nine electronic databases were searched from inception to March 2020. Eligible studies investigated both direct outcome measures of running performance (e.g. running speed) and/or physiological measures (e.g. running economy (RE)) alongside comfort for each footwear condition tested. Methodological quality was assessed using the “Effective Public Health Practice Project” (EPHPP). RE during submaximal running was the most common physiological outcome reported in 4 of the 6 eligible studies. The absolute difference in RE between the most and least comfortable footwear condition was computed, and meta‐analysis was conducted using a random effect model. The most comfortable footwear is associated with a reduction in oxygen consumption (MD: −2.06 mL.kg−1.min−1, 95%CI: −3.71, −0.42, P = 0.01) while running at a set submaximal speed. There was no significant heterogeneity (I 2 = 0%, P = 0.82). EPHPP quality assessment demonstrated weak quality of the studies, due to reporting bias and failing to disclose the psychometric properties of the outcome measures. It can be concluded with moderate certainty that improved RE in recreational athletes is associated with wearing more comfortable footwear compared to less comfortable footwear.Highlights This systematic review reports on the association of footwear comfort with running economy in recreational runners. Running economy during constant submaximal running is likely improved in recreational runners wearing more comfortable compared to less comfortable footwear. This finding is based on a meta‐analysis, including four studies, showing a small but statistically significant decreased oxygen consumption at steady state speeds while wearing the most comfortable footwear.
- 21 November 2021
- Published by Wiley in European Journal of Sport Science
- Vol. 23 (1) , 121-133
Open AccessIncreased footwear comfort is associated with improved running economy – a systematic review and meta‐analysis
Footwear with or without custom foot orthotics have the potential to improve comfort, but the link with running performance needs further investigation. We systematically reviewed the association of footwear comfort on running economy in recreational runners. Nine electronic databases were searched from inception to March 2020. Eligible studies investigated both direct outcome measures of running performance (e.g. running speed) and/or physiological measures (e.g. running economy (RE)) alongside comfort for each footwear condition tested. Methodological quality was assessed using the “Effective Public Health Practice Project” (EPHPP). RE during submaximal running was the most common physiological outcome reported in 4 of the 6 eligible studies. The absolute difference in RE between the most and least comfortable footwear condition was computed, and meta‐analysis was conducted using a random effect model. The most comfortable footwear is associated with a reduction in oxygen consumption (MD: −2.06 mL.kg−1.min−1, 95%CI: −3.71, −0.42, P = 0.01) while running at a set submaximal speed. There was no significant heterogeneity (I 2 = 0%, P = 0.82). EPHPP quality assessment demonstrated weak quality of the studies, due to reporting bias and failing to disclose the psychometric properties of the outcome measures. It can be concluded with moderate certainty that improved RE in recreational athletes is associated with wearing more comfortable footwear compared to less comfortable footwear.Highlights This systematic review reports on the association of footwear comfort with running economy in recreational runners. Running economy during constant submaximal running is likely improved in recreational runners wearing more comfortable compared to less comfortable footwear. This finding is based on a meta‐analysis, including four studies, showing a small but statistically significant decreased oxygen consumption at steady state speeds while wearing the most comfortable footwear.
- 15 September 2021
- Published by Wiley in European Journal of Sport Science
- Vol. 22 (7) , 1025-1034
Detecting mechanical breakpoints during treadmill‐based graded exercise test: Relationships to ventilatory thresholds
Background: While changes in cardio‐respiratory variables during graded exercise tests (GXTs) are well described, less is known about running mechanical alterations. Purpose: We determined mechanical breakpoints during GXT and compared their temporal location with thresholds in ventilation. Methods: Thirty‐one recreational male runners completed continuous GXT on an instrumented treadmill, starting at 2.5 m.s−1 with velocity increases of +0.14 m.s−1 every 30 s. Subsequently, the first and second ventilatory thresholds (VT1 and VT2) were determined from expired gases. Spatio‐temporal and antero‐posterior force variables, and spring‐mass model characteristics were averaged for each stage. Mechanical breakpoints were detected using a linear fit process that partitioned the timeseries into two regions and minimised the error sum of squares. All measurements were normalised to % GXT duration for subsequent comparisons. Results: Fifteen out of 16 mechanical variables (all except leg stiffness) displayed breakpoints occurring between 61.9% and 82.3% of GXT duration; these occurred significantly later than VT1 (46.9 ± 6.4% of GXT duration, p < .05). Mechanical breakpoints for eight variables (step frequency, aerial time, step length, peak push‐off force, braking impulse, peak vertical force, maximal downward vertical displacement and leg compression) occurred at a time point not different to VT2 (75.3 ± 6.2% of GXT duration; all p > .05). Relationships between mechanical breakpoints and either VT1 or VT2 were weak (all r < 0.25). Conclusion: During treadmill GXT, breakpoints can be detected for the vast majority of mechanical variables (except leg stiffness), yet these are not related with ventilatory thresholds.
- 15 September 2021
- Published by Wiley in European Journal of Sport Science
- Vol. 22 (7) , 1025-1034
Detecting mechanical breakpoints during treadmill‐based graded exercise test: Relationships to ventilatory thresholds
Background: While changes in cardio‐respiratory variables during graded exercise tests (GXTs) are well described, less is known about running mechanical alterations. Purpose: We determined mechanical breakpoints during GXT and compared their temporal location with thresholds in ventilation. Methods: Thirty‐one recreational male runners completed continuous GXT on an instrumented treadmill, starting at 2.5 m.s−1 with velocity increases of +0.14 m.s−1 every 30 s. Subsequently, the first and second ventilatory thresholds (VT1 and VT2) were determined from expired gases. Spatio‐temporal and antero‐posterior force variables, and spring‐mass model characteristics were averaged for each stage. Mechanical breakpoints were detected using a linear fit process that partitioned the timeseries into two regions and minimised the error sum of squares. All measurements were normalised to % GXT duration for subsequent comparisons. Results: Fifteen out of 16 mechanical variables (all except leg stiffness) displayed breakpoints occurring between 61.9% and 82.3% of GXT duration; these occurred significantly later than VT1 (46.9 ± 6.4% of GXT duration, p < .05). Mechanical breakpoints for eight variables (step frequency, aerial time, step length, peak push‐off force, braking impulse, peak vertical force, maximal downward vertical displacement and leg compression) occurred at a time point not different to VT2 (75.3 ± 6.2% of GXT duration; all p > .05). Relationships between mechanical breakpoints and either VT1 or VT2 were weak (all r < 0.25). Conclusion: During treadmill GXT, breakpoints can be detected for the vast majority of mechanical variables (except leg stiffness), yet these are not related with ventilatory thresholds.
- Open Access
- 30 June 2020
- Published by Springer Nature in European Journal of Applied Physiology
- Vol. 120 (9) , 2037-2045
Custom foot orthoses improve performance, but do not modify the biomechanical manifestation of fatigue, during repeated treadmill sprints
Purpose: We determined the effect of custom foot orthotics manufactured from ethyl-vinyl acetate (EVA) and expanded thermoplastic polyurethane (TPU) materials, both compared to a control condition (CON; shoes only) during repeated sprints on running mechanical alterations. Methods: Eighteen males performed eight, 5-s sprints with 25-s recovery on an instrumented sprint treadmill in three footwear conditions (EVA, TPU and CON). Mechanical data consisted of continuous (step-by-step) measurement of running kinetics and kinematics, which were averaged for each sprint for further analysis. Results: Distance ran in 5 s decreased from first to last sprint (P < 0.001), yet with higher sprints 1–8 values for both EVA (P = 0.004) and TPU (P = 0.018) versus CON. Regardless of footwear condition, mean horizontal forces, step frequency, vertical and leg stiffness decreased from sprint 1 to sprint 8 (all P < 0.001). Duration of the propulsive phase was globally shorter for both EVA (P = 0.002) and TPU (P = 0.021) versus CON, while braking phase duration was similar (P = 0.919). In the horizontal direction, peak propulsive (P < 0.001), but not braking (P = 0.172), forces also decreased from sprint 1 to sprint 8, independently of conditions. Conclusion: Compared to shoe only, wearing EVA or TPU custom foot orthotics improved repeated treadmill sprint ability, yet provided similar fatigue-induced changes in mechanical outcomes.
- 30 June 2020
- Published by Springer Nature in European Journal of Applied Physiology
- Vol. 120 (9) , 2037-2045
Open AccessCustom foot orthoses improve performance, but do not modify the biomechanical manifestation of fatigue, during repeated treadmill sprints
Purpose: We determined the effect of custom foot orthotics manufactured from ethyl-vinyl acetate (EVA) and expanded thermoplastic polyurethane (TPU) materials, both compared to a control condition (CON; shoes only) during repeated sprints on running mechanical alterations. Methods: Eighteen males performed eight, 5-s sprints with 25-s recovery on an instrumented sprint treadmill in three footwear conditions (EVA, TPU and CON). Mechanical data consisted of continuous (step-by-step) measurement of running kinetics and kinematics, which were averaged for each sprint for further analysis. Results: Distance ran in 5 s decreased from first to last sprint (P < 0.001), yet with higher sprints 1–8 values for both EVA (P = 0.004) and TPU (P = 0.018) versus CON. Regardless of footwear condition, mean horizontal forces, step frequency, vertical and leg stiffness decreased from sprint 1 to sprint 8 (all P < 0.001). Duration of the propulsive phase was globally shorter for both EVA (P = 0.002) and TPU (P = 0.021) versus CON, while braking phase duration was similar (P = 0.919). In the horizontal direction, peak propulsive (P < 0.001), but not braking (P = 0.172), forces also decreased from sprint 1 to sprint 8, independently of conditions. Conclusion: Compared to shoe only, wearing EVA or TPU custom foot orthotics improved repeated treadmill sprint ability, yet provided similar fatigue-induced changes in mechanical outcomes.
- Open Access
- 19 September 2019
- Published by Frontiers Media SA in Frontiers in Sports and Active Living
- Vol. 1
The Effect of EVA and TPU Custom Foot Orthoses on Running Economy, Running Mechanics, and Comfort
Custom made foot orthoses (CFO) with specific material properties have the potential to alter ground reaction forces but their effect on running mechanics and comfort remains to be investigated. We determined if CFO manufactured from ethyl-vinyl acetate (EVA) and expanded thermoplastic polyurethane (TPU) materials, both compared to standardized footwear (CON), improve running economy (RE), running mechanics, and comfort at two running speeds. Eighteen well-trained, male athletes ran on an instrumented treadmill for 6 min at high (HS) and low (LS) speeds corresponding to and 15% lower than their first ventilatory threshold (13.8 ± 1.1 and 11.7 ± 0.9 km.h−1, respectively) in three footwear conditions (CON, EVA, and TPU). RE, running mechanics and comfort were determined. Albeit not reaching statistical significance (P = 0.11, η2 = 0.12), RE on average improved in EVA (+2.1 ± 4.8 and +2.9 ± 4.9%) and TPU (+0.9 ± 5.9 and +0.9 ± 5.3%) compared to CON at LS and HS, respectively. Braking force was decreased by 3.4 ± 9.1% at LS and by 2.7 ± 9.8% at HS for EVA compared to CON (P = 0.03, η2 = 0.20). TPU increased propulsive loading rate by 20.2 ± 24 and 16.4 ± 23.1% for LS and HS, respectively compared to CON (P = 0.01, η2 = 0.25). Both arch height (P = 0.06, η2 = 0.19) and medio-lateral control (P = 0.06, η2 = 0.16) showed a trend toward improved comfort for EVA and TPU vs. CON. Compared to shoes only, mainly EVA tended to improve RE and comfort at submaximal running speeds. Specific CFO-related running mechanical adjustments included a reduced braking impulse occurring in the first 25% of contact time with EVA, whereas wearing TPU increased propulsive loading rate.
- 19 September 2019
- Published by Frontiers Media SA in Frontiers in Sports and Active Living
- Vol. 1
Open AccessThe Effect of EVA and TPU Custom Foot Orthoses on Running Economy, Running Mechanics, and Comfort
Custom made foot orthoses (CFO) with specific material properties have the potential to alter ground reaction forces but their effect on running mechanics and comfort remains to be investigated. We determined if CFO manufactured from ethyl-vinyl acetate (EVA) and expanded thermoplastic polyurethane (TPU) materials, both compared to standardized footwear (CON), improve running economy (RE), running mechanics, and comfort at two running speeds. Eighteen well-trained, male athletes ran on an instrumented treadmill for 6 min at high (HS) and low (LS) speeds corresponding to and 15% lower than their first ventilatory threshold (13.8 ± 1.1 and 11.7 ± 0.9 km.h−1, respectively) in three footwear conditions (CON, EVA, and TPU). RE, running mechanics and comfort were determined. Albeit not reaching statistical significance (P = 0.11, η2 = 0.12), RE on average improved in EVA (+2.1 ± 4.8 and +2.9 ± 4.9%) and TPU (+0.9 ± 5.9 and +0.9 ± 5.3%) compared to CON at LS and HS, respectively. Braking force was decreased by 3.4 ± 9.1% at LS and by 2.7 ± 9.8% at HS for EVA compared to CON (P = 0.03, η2 = 0.20). TPU increased propulsive loading rate by 20.2 ± 24 and 16.4 ± 23.1% for LS and HS, respectively compared to CON (P = 0.01, η2 = 0.25). Both arch height (P = 0.06, η2 = 0.19) and medio-lateral control (P = 0.06, η2 = 0.16) showed a trend toward improved comfort for EVA and TPU vs. CON. Compared to shoes only, mainly EVA tended to improve RE and comfort at submaximal running speeds. Specific CFO-related running mechanical adjustments included a reduced braking impulse occurring in the first 25% of contact time with EVA, whereas wearing TPU increased propulsive loading rate.
- 3 August 2018
- Published by Springer Nature in Podosophia
- Vol. 26 (3) , 90-95
Jones-fractuur: ‘optimale belasting’ gebaseerd op podotherapeutische analyse
- 3 August 2018
- Published by Springer Nature in Podosophia
- Vol. 26 (3) , 90-95
Jones-fractuur: ‘optimale belasting’ gebaseerd op podotherapeutische analyse
- Open Access
- 20 June 2018
- Published by BMJ in BMJ Open Sport & Exercise Medicine
- Vol. 4 (1) , e000377
Fifth metatarsal stress fracture in elite male football players: an on-field analysis of plantar loading
Objective: Evaluate plantar loading during ‘on-field’ common football movements in players after fifth metatarsal (MT-5) stress fracture and compare with matched healthy players. Methods: Fourteen elite male soccer players participated in the study conducted on a natural grass playing surface using firm ground football boots. Seven players who had suffered a primary stress fracture (MT-5 group) and seven matched healthy players (controls, CON) performed three common football movements while in-shoe plantar loading data were collected. Results: Large between-group differences exist for maximal vertical force normalised to bodyweight (Fmax) at the lateral toes (2-5) of the stance leg during a set-piece kick (MT-5: 0.2±0.06 bodyweight (BW), CON: 0.1±0.05 BW, effect size (ES) 1.4) and the curved run where the MT-5 group showed higher Fmax with very large effect size at the lateral forefoot of the injured (closest to curve) limb when running a curve to receive a pass (MT-5 injured−CON=0.01 BW, ES 1.5). Small between-group differences were evident during straight-line running. However, between-limb analysis of MT-5 group showed significant unloading of the lateral forefoot region of the involved foot. Conclusions: Elite male football players who have returned to play after MT-5 stress fracture display significantly higher maximum plantar force at the lateral forefoot and lateral toes (2-5) compared with healthy matched control players during two football movements (kick and curved run) with the magnitude of these differences being very large. These findings may have important implications for manipulating regional load during rehabilitation or should a player report lateral forefoot prodromal symptoms.
- 20 June 2018
- Published by BMJ in BMJ Open Sport & Exercise Medicine
- Vol. 4 (1) , e000377
Open AccessFifth metatarsal stress fracture in elite male football players: an on-field analysis of plantar loading
Objective: Evaluate plantar loading during ‘on-field’ common football movements in players after fifth metatarsal (MT-5) stress fracture and compare with matched healthy players. Methods: Fourteen elite male soccer players participated in the study conducted on a natural grass playing surface using firm ground football boots. Seven players who had suffered a primary stress fracture (MT-5 group) and seven matched healthy players (controls, CON) performed three common football movements while in-shoe plantar loading data were collected. Results: Large between-group differences exist for maximal vertical force normalised to bodyweight (Fmax) at the lateral toes (2-5) of the stance leg during a set-piece kick (MT-5: 0.2±0.06 bodyweight (BW), CON: 0.1±0.05 BW, effect size (ES) 1.4) and the curved run where the MT-5 group showed higher Fmax with very large effect size at the lateral forefoot of the injured (closest to curve) limb when running a curve to receive a pass (MT-5 injured−CON=0.01 BW, ES 1.5). Small between-group differences were evident during straight-line running. However, between-limb analysis of MT-5 group showed significant unloading of the lateral forefoot region of the involved foot. Conclusions: Elite male football players who have returned to play after MT-5 stress fracture display significantly higher maximum plantar force at the lateral forefoot and lateral toes (2-5) compared with healthy matched control players during two football movements (kick and curved run) with the magnitude of these differences being very large. These findings may have important implications for manipulating regional load during rehabilitation or should a player report lateral forefoot prodromal symptoms.