Jean Bosco Mbede
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Previous Organizations / Institutes
The organizations / institutes from the scholar's other articles in the past ten years
Research Subjects
Jean Bosco Mbede has a total of 37 co-authors. Here are the top co-authors by number of shared publications:
Achille Melingui
University of Yaoundé I
4 shared publicationsR. Merzouki
LAGIS, (UMR) (CNRS) 8146 Ecole Polytechnique de Lille 59655 France
4 shared publicationsRochdi Merzouki
CRIStAL UMR-CNRS, Ecole Polytechnique de Lille, Villeneuve d’Ascq, France
4 shared publicationsWu Wei
4 shared publicationsA. Melingui
LAGIS, (UMR), (CNRS) 8146, Ecole Poly-technique de Lille, 59655 Villeneuve d'Ascq, France
3 shared publications- Joseph Jean-Baptiste Mvogo Ahanda
University of Yaoundé I
3 shared publications
Latest Publications
- 21 January 2018
- Published by Cambridge University Press (CUP) in Robotica
- Vol. 36 (5) , 767-786
Robust adaptive command filtered control of a robotic manipulator with uncertain dynamic and joint space constraints
SUMMARY: The problem of robust adaptive control of a robotic manipulator subjected to uncertain dynamics and joint space constraints is addressed in this paper. Command filters are used to overcome the time derivatives of virtual control, thus reducing the need for desired trajectory differentiations. A barrier Lyapunov function is used to deal with the joint space constraints. A robust adaptive support vector regression architecture is used to reduce filtering errors, approximation errors and handle dynamic uncertainties. The stability analysis of the closed-loop system using the Lyapunov theory permits to highlight adaptation laws and to prove that all signals of the closed-loop system are bounded. Simulations show the effectiveness of the proposed control strategy.
- 21 January 2018
- Published by Cambridge University Press (CUP) in Robotica
- Vol. 36 (5) , 767-786
Robust adaptive command filtered control of a robotic manipulator with uncertain dynamic and joint space constraints
SUMMARY: The problem of robust adaptive control of a robotic manipulator subjected to uncertain dynamics and joint space constraints is addressed in this paper. Command filters are used to overcome the time derivatives of virtual control, thus reducing the need for desired trajectory differentiations. A barrier Lyapunov function is used to deal with the joint space constraints. A robust adaptive support vector regression architecture is used to reduce filtering errors, approximation errors and handle dynamic uncertainties. The stability analysis of the closed-loop system using the Lyapunov theory permits to highlight adaptation laws and to prove that all signals of the closed-loop system are bounded. Simulations show the effectiveness of the proposed control strategy.
- 23 November 2017
- Published by Cambridge University Press (CUP) in Robotica
- Vol. 36 (4) , 516-534
Robust adaptive control for robot manipulators: Support vector regression-based command filtered adaptive backstepping approach
SUMMARY: This study derives a robust adaptive control of electrically driven robot manipulators using a support vector regression (SVR)-based command filtered adaptive backstepping approach. The robot system is supposed to be subject to model uncertainties, neglected dynamics, and external disturbances. The command filtered backstepping algorithm is extended to the case of the robot manipulators. A robust term is added to the common adaptive SVR algorithm, to mitigate the effects of the SVR approximation error in the path tracking performance. The stability analysis of the closed loop system using the Lyapunov theory permits to highlight adaptation laws and to prove that all the signals in the closed loop system are bounded. Simulations show the effectiveness of the proposed control strategy.
- 23 November 2017
- Published by Cambridge University Press (CUP) in Robotica
- Vol. 36 (4) , 516-534
Robust adaptive control for robot manipulators: Support vector regression-based command filtered adaptive backstepping approach
SUMMARY: This study derives a robust adaptive control of electrically driven robot manipulators using a support vector regression (SVR)-based command filtered adaptive backstepping approach. The robot system is supposed to be subject to model uncertainties, neglected dynamics, and external disturbances. The command filtered backstepping algorithm is extended to the case of the robot manipulators. A robust term is added to the common adaptive SVR algorithm, to mitigate the effects of the SVR approximation error in the path tracking performance. The stability analysis of the closed loop system using the Lyapunov theory permits to highlight adaptation laws and to prove that all the signals in the closed loop system are bounded. Simulations show the effectiveness of the proposed control strategy.
- 10 March 2015
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE/ASME Transactions on Mechatronics
- Vol. 20 (6) , 2862-2875
Adaptive Neural Network Control of a Compact Bionic Handling Arm
In this paper, autonomous control problem of a class of bionic continuum robots named “Compact Bionic Handling Arm” (CBHA) is addressed. These robots can reproduce biological behaviors of trunks, tentacles, or snakes. The modeling problem associated with continuum robots includes nonlinearities, structured and unstructured uncertainties, and the hyperredundancy. In addition to these problems, the CBHA comprises the hysteresis behavior of its actuators and a memory phenomenon related to its structure made of polyamide materials. These undesirable effects make it difficult to design a control system based on quantitative models of the CBHA. Thus, two subcontrollers are proposed in this paper. One, encapsulated in the other, and both implemented in real time allow controlling of the CBHA's end-effector position. The first subcontroller controls the CBHA's kinematics based on a distal supervised learning scheme. The second subcontroller controls the CBHA's kinetics based on an adaptive neural control. These subcontrollers allow a better assessment of the stability of the control architecture while ensuring the convergence of Cartesian errors. The obtained experimental results using a CBHA robot show an accurate tracking of the CBHA's end-effector position.
- 10 March 2015
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE/ASME Transactions on Mechatronics
- Vol. 20 (6) , 2862-2875
Adaptive Neural Network Control of a Compact Bionic Handling Arm
In this paper, autonomous control problem of a class of bionic continuum robots named “Compact Bionic Handling Arm” (CBHA) is addressed. These robots can reproduce biological behaviors of trunks, tentacles, or snakes. The modeling problem associated with continuum robots includes nonlinearities, structured and unstructured uncertainties, and the hyperredundancy. In addition to these problems, the CBHA comprises the hysteresis behavior of its actuators and a memory phenomenon related to its structure made of polyamide materials. These undesirable effects make it difficult to design a control system based on quantitative models of the CBHA. Thus, two subcontrollers are proposed in this paper. One, encapsulated in the other, and both implemented in real time allow controlling of the CBHA's end-effector position. The first subcontroller controls the CBHA's kinematics based on a distal supervised learning scheme. The second subcontroller controls the CBHA's kinetics based on an adaptive neural control. These subcontrollers allow a better assessment of the stability of the control architecture while ensuring the convergence of Cartesian errors. The obtained experimental results using a CBHA robot show an accurate tracking of the CBHA's end-effector position.
- Open Access
- 8 September 2014
- Published by Hindawi Limited in Journal of Robotics
- Vol. 2014, 1-10
Exponential Tracking Control Using Backstepping Approach for Voltage-Based Control of a Flexible Joint Electrically Driven Robot
This paper addresses the design of exponential tracking control using backstepping approach for voltage-based control of a flexible joint electrically driven robot (EFJR), to cope with the difficulty introduced by the cascade structure in EFJR dynamic model, to deal with flexibility in joints, and to ensure fast tracking performance. Backstepping approach is used to ensure global asymptotic stability and its common algorithm is modified such that the link position and velocity errors converge to zero exponentially fast. In contrast with the other backstepping controller for electrically driven flexible joint robot manipulators control problem, the proposed controller is robust with respect to stiffness uncertainty and allows tracking fast motions. Simulation results are presented for both single link flexible joint electrically driven manipulator and 2-DOF flexible joint electrically driven robot manipulator. These simulations show very satisfactory tracking performances and the superiority of the proposed controller to those performed in the literature using simple backstepping methodology.
- 8 September 2014
- Published by Hindawi Limited in Journal of Robotics
- Vol. 2014, 1-10
Open AccessExponential Tracking Control Using Backstepping Approach for Voltage-Based Control of a Flexible Joint Electrically Driven Robot
This paper addresses the design of exponential tracking control using backstepping approach for voltage-based control of a flexible joint electrically driven robot (EFJR), to cope with the difficulty introduced by the cascade structure in EFJR dynamic model, to deal with flexibility in joints, and to ensure fast tracking performance. Backstepping approach is used to ensure global asymptotic stability and its common algorithm is modified such that the link position and velocity errors converge to zero exponentially fast. In contrast with the other backstepping controller for electrically driven flexible joint robot manipulators control problem, the proposed controller is robust with respect to stiffness uncertainty and allows tracking fast motions. Simulation results are presented for both single link flexible joint electrically driven manipulator and 2-DOF flexible joint electrically driven robot manipulator. These simulations show very satisfactory tracking performances and the superiority of the proposed controller to those performed in the literature using simple backstepping methodology.
- 2 September 2014
- Published by SAGE Publications in Proceedings of the Institution of Mechanical Engineers, Part I: Journal of Systems and Control Engineering
- Vol. 228 (10) , 787-801
A novel approach to integrate artificial potential field and fuzzy logic into a common framework for robots autonomous navigation
Artificial potential field and fuzzy logic are efficient approaches for mobile robots autonomous navigation. However, both have advantages and drawbacks. Their integration into a common control scheme can significantly improve the performances of the resulting hybrid controller. In this article, we propose a novel hybrid approach in order to better exploit their advantages. The present work contributes in three aspects: first, the proposed control scheme integrates interval type-2 fuzzy logic concepts with artificial potential field concepts into a common framework in order to better exploit their advantages. Second, the proposed control scheme is a simple and realizable design for real-time implementation because only 15 fuzzy rules are sufficient to control the mobile robot. Third, the proposed control scheme is a synthesized design which utilizes both heuristic knowledge and the sampled input–output data pairs. An implementation in real-time on an omnidirectional mobile robot validates the effectiveness of the proposed control scheme.
- 2 September 2014
- Published by SAGE Publications in Proceedings of the Institution of Mechanical Engineers, Part I: Journal of Systems and Control Engineering
- Vol. 228 (10) , 787-801
A novel approach to integrate artificial potential field and fuzzy logic into a common framework for robots autonomous navigation
Artificial potential field and fuzzy logic are efficient approaches for mobile robots autonomous navigation. However, both have advantages and drawbacks. Their integration into a common control scheme can significantly improve the performances of the resulting hybrid controller. In this article, we propose a novel hybrid approach in order to better exploit their advantages. The present work contributes in three aspects: first, the proposed control scheme integrates interval type-2 fuzzy logic concepts with artificial potential field concepts into a common framework in order to better exploit their advantages. Second, the proposed control scheme is a simple and realizable design for real-time implementation because only 15 fuzzy rules are sufficient to control the mobile robot. Third, the proposed control scheme is a synthesized design which utilizes both heuristic knowledge and the sampled input–output data pairs. An implementation in real-time on an omnidirectional mobile robot validates the effectiveness of the proposed control scheme.
- 1 July 2014
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- No. 21614393,p. 754-761
Qualitative approach for inverse kinematic modeling of a Compact Bionic Handling Assistant trunk
Compact Bionic Handling Assistant (CBHA) is a continuum manipulator, with pneumatic-based actuation and compliant gripper. This bionic arm is attached to a mobile robot named Robotino. Inspired by the elephant's trunk, it can reproduce biological behaviors of trunks, tentacles, or snakes. Unlike rigid link robot manipulators, the development of high performance control algorithm of continuum robot manipulators remains a challenge, particularly due to their complex mechanical design, hyper-redundancy and presence of uncertainties. Numerous studies have been investigated for modeling of such complex systems. Such continuum robots, like the CBHA present a set of nonlinearities and uncertainties, making difficult to build an accurate analytical model, which can be used for control strategies development. Hence, learning approach becomes a suitable tool in such scenarios in order to capture un-modeled nonlinear behaviors of the continuous robots. In this paper, we present a qualitative modeling approach, based on neuronal model of the inverse kinematic of CBHA. A penalty term constraint is added to the inverse objective function into Distal Supervised Learning (DSL) scheme to select one particular inverse model from the redundancy manifold. The inverse kinematic neuronal model is validated by conducting a real-time implementation on a CBHA trunk.
- 1 July 2014
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- No. 21614393,p. 754-761
Qualitative approach for inverse kinematic modeling of a Compact Bionic Handling Assistant trunk
Compact Bionic Handling Assistant (CBHA) is a continuum manipulator, with pneumatic-based actuation and compliant gripper. This bionic arm is attached to a mobile robot named Robotino. Inspired by the elephant's trunk, it can reproduce biological behaviors of trunks, tentacles, or snakes. Unlike rigid link robot manipulators, the development of high performance control algorithm of continuum robot manipulators remains a challenge, particularly due to their complex mechanical design, hyper-redundancy and presence of uncertainties. Numerous studies have been investigated for modeling of such complex systems. Such continuum robots, like the CBHA present a set of nonlinearities and uncertainties, making difficult to build an accurate analytical model, which can be used for control strategies development. Hence, learning approach becomes a suitable tool in such scenarios in order to capture un-modeled nonlinear behaviors of the continuous robots. In this paper, we present a qualitative modeling approach, based on neuronal model of the inverse kinematic of CBHA. A penalty term constraint is added to the inverse objective function into Distal Supervised Learning (DSL) scheme to select one particular inverse model from the redundancy manifold. The inverse kinematic neuronal model is validated by conducting a real-time implementation on a CBHA trunk.
- Open Access
- 1 July 2014
- Published by Institution of Engineering and Technology (IET) in Electronics Letters
- Vol. 50 (14) , 979-981
Compact bionic handling arm control using neural networks
The tip position control of a class of continuum manipulators namely the compact bionic handling arm (CBHA) is proposed. The control scheme includes two sub‐controllers. The first sub‐controller, based on the distal supervised learning scheme, deals with the stationary CBHA's behaviours; whereas the second based on adaptive control handles non‐stationary behaviours. The experimental results obtained using the CBHA robot demonstrate the efficiency of the proposed approach.
- 1 July 2014
- Published by Institution of Engineering and Technology (IET) in Electronics Letters
- Vol. 50 (14) , 979-981
Open AccessCompact bionic handling arm control using neural networks
The tip position control of a class of continuum manipulators namely the compact bionic handling arm (CBHA) is proposed. The control scheme includes two sub‐controllers. The first sub‐controller, based on the distal supervised learning scheme, deals with the stationary CBHA's behaviours; whereas the second based on adaptive control handles non‐stationary behaviours. The experimental results obtained using the CBHA robot demonstrate the efficiency of the proposed approach.
- 1 June 2014
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- No. 21635137,p. 1239-1244
Neural Networks based approach for inverse kinematic modeling of a Compact Bionic Handling Assistant trunk
A common approach to resolve the problem of inverse kinematics of manipulators is based on the Jacobian matrix. However, depending on the complexity of the system to model the elements of the Jacobian matrices may not be calculated. To overcome intrinsic problems related to Jacobian matrix based methods, a new inverse kinematic modeling approach capable to approximate the inverse kinematics of a class of hyper-redundant continuum robots, namely Compact Bionic Handling Assistant (CBHA) is proposed in the present work. The proposed approach makes use of Multilayer Perceptron (MLP) and Radial Basis Function (RBF) Neural Networks as approximation methods. A validation using a rigid 6 DOF industrial manipulator demonstrates the effectiveness and efficiency of the proposed approach.
- 1 June 2014
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- No. 21635137,p. 1239-1244
Neural Networks based approach for inverse kinematic modeling of a Compact Bionic Handling Assistant trunk
A common approach to resolve the problem of inverse kinematics of manipulators is based on the Jacobian matrix. However, depending on the complexity of the system to model the elements of the Jacobian matrices may not be calculated. To overcome intrinsic problems related to Jacobian matrix based methods, a new inverse kinematic modeling approach capable to approximate the inverse kinematics of a class of hyper-redundant continuum robots, namely Compact Bionic Handling Assistant (CBHA) is proposed in the present work. The proposed approach makes use of Multilayer Perceptron (MLP) and Radial Basis Function (RBF) Neural Networks as approximation methods. A validation using a rigid 6 DOF industrial manipulator demonstrates the effectiveness and efficiency of the proposed approach.
- 1 December 2013
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1924-1929
Adaptive navigation of an omni-drive autonomous mobile robot in unstructured dynamic environments
One of the challenges of Autonomous Systems navigating in real world is to deal with the large amounts of uncertainties which are inherent in such environment while maintaining stability. Higher order Fuzzy Logic Systems (FLS), such as Interval Type-2 Fuzzy Logic Systems (IT2FLS), that use type-2 fuzzy sets, can model and handle such uncertainties, and give good performances that outperform their Type-1 counterparts. However, the complexity and computational time of type-reduction process which is strongly related to Membership Functions (MFs) structure and the number of fuzzy rules limit their applications to simple cases in real-time. Artificial Potential Field (APF) approach due to its elegant mathematical analysis, simplicity and its possibility to take into account the dynamic of the system is widely used for autonomous mobile robots navigation. However, the potential field introduced exhibits local minima other than at the goal position of the robot. In this paper, a new real-time navigation approach where we combine the APF and IT2FL approaches is developed and implemented for an omnidrive mobile robot navigating in dynamic unstructured environments. The novelty of the approach is the association of IT2FL to APF and the way in which the two approaches are hybridized (rule base size reduction). The experiments carried out on an omnidrive mobile robot named Robotino show the effectiveness of our approach.
- 1 December 2013
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1924-1929
Adaptive navigation of an omni-drive autonomous mobile robot in unstructured dynamic environments
One of the challenges of Autonomous Systems navigating in real world is to deal with the large amounts of uncertainties which are inherent in such environment while maintaining stability. Higher order Fuzzy Logic Systems (FLS), such as Interval Type-2 Fuzzy Logic Systems (IT2FLS), that use type-2 fuzzy sets, can model and handle such uncertainties, and give good performances that outperform their Type-1 counterparts. However, the complexity and computational time of type-reduction process which is strongly related to Membership Functions (MFs) structure and the number of fuzzy rules limit their applications to simple cases in real-time. Artificial Potential Field (APF) approach due to its elegant mathematical analysis, simplicity and its possibility to take into account the dynamic of the system is widely used for autonomous mobile robots navigation. However, the potential field introduced exhibits local minima other than at the goal position of the robot. In this paper, a new real-time navigation approach where we combine the APF and IT2FL approaches is developed and implemented for an omnidrive mobile robot navigating in dynamic unstructured environments. The novelty of the approach is the association of IT2FL to APF and the way in which the two approaches are hybridized (rule base size reduction). The experiments carried out on an omnidrive mobile robot named Robotino show the effectiveness of our approach.
- 1 July 2012
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- Vol. 10, 63-68
zSlices based type-2 fuzzy motion control for autonomous robotino mobile robot
In this paper, we combine the advantage of more controllable degrees of freedom offers by Omni-directional mobile platform with the ability of the type-2 fuzzy logic to deal with the high levels uncertainties present in the majority of real world applications to control ROMR (Robotino Omni-directional mobile robot) in unknown and unstructured dynamic environments, where the robot facing to static obstacles and unpredicted dynamic events. We develop a real time local path modification and motion planning system using the concept of zSlices based general type-2 fuzzy sets to allow ROMR facing of high levels uncertainties encounters in changing and dynamics unstructured indoor environments. The experiment results demonstrate that our navigation system have the ability to reach ROMR to a desired goal configuration avoiding both static and mobile obstacles in unknown and unstructured dynamic environments.
- 1 July 2012
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- Vol. 10, 63-68
zSlices based type-2 fuzzy motion control for autonomous robotino mobile robot
In this paper, we combine the advantage of more controllable degrees of freedom offers by Omni-directional mobile platform with the ability of the type-2 fuzzy logic to deal with the high levels uncertainties present in the majority of real world applications to control ROMR (Robotino Omni-directional mobile robot) in unknown and unstructured dynamic environments, where the robot facing to static obstacles and unpredicted dynamic events. We develop a real time local path modification and motion planning system using the concept of zSlices based general type-2 fuzzy sets to allow ROMR facing of high levels uncertainties encounters in changing and dynamics unstructured indoor environments. The experiment results demonstrate that our navigation system have the ability to reach ROMR to a desired goal configuration avoiding both static and mobile obstacles in unknown and unstructured dynamic environments.